package/network/services/hostapd/files/netifd.sh

   1 wpa_supplicant_add_rate() {
   2         local var="$1"
   3         local val="$(($2 / 1000))"
   4         local sub="$((($2 / 100) % 10))"
   5         append $var "$val" ","
   6         [ $sub -gt 0 ] && append $var "."
   7 }
   8
   9 hostapd_add_rate() {
  10         local var="$1"
  11         local val="$(($2 / 100))"
  12         append $var "$val" " "
  13 }
  14
  15 hostapd_append_wep_key() {
  16         local var="$1"
  17
  18         wep_keyidx=0
  19         set_default key 1
  20         case "$key" in
  21                 [1234])
  22                         for idx in 1 2 3 4; do
  23                                 local zidx
  24                                 zidx=$(($idx - 1))
  25                                 json_get_var ckey "key${idx}"
  26                                 [ -n "$ckey" ] && \
  27                                         append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
  28                         done
  29                         wep_keyidx=$((key - 1))
  30                 ;;
  31                 *)
  32                         append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
  33                 ;;
  34         esac
  35 }
  36
  37 hostapd_add_log_config() {
  38         config_add_boolean \
  39                 log_80211 \
  40                 log_8021x \
  41                 log_radius \
  42                 log_wpa \
  43                 log_driver \
  44                 log_iapp \
  45                 log_mlme
  46
  47         config_add_int log_level
  48 }
  49
  50 hostapd_common_add_device_config() {
  51         config_add_array basic_rate
  52         config_add_array supported_rates
  53
  54         config_add_string country
  55         config_add_boolean country_ie doth
  56         config_add_string require_mode
  57
  58         hostapd_add_log_config
  59 }
  60
  61 hostapd_prepare_device_config() {
  62         local config="$1"
  63         local driver="$2"
  64
  65         local base="${config%%.conf}"
  66         local base_cfg=
  67
  68         json_get_vars country country_ie beacon_int doth require_mode
  69
  70         hostapd_set_log_options base_cfg
  71
  72         set_default country_ie 1
  73         set_default doth 1
  74
  75         [ -n "$country" ] && {
  76                 append base_cfg "country_code=$country" "$N"
  77
  78                 [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
  79                 [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
  80         }
  81         [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
  82
  83         local brlist= br
  84         json_get_values basic_rate_list basic_rate
  85         for br in $basic_rate_list; do
  86                 hostapd_add_rate brlist "$br"
  87         done
  88         case "$require_mode" in
  89                 g) brlist="60 120 240" ;;
  90                 n) append base_cfg "require_ht=1" "$N";;
  91                 ac) append base_cfg "require_vht=1" "$N";;
  92         esac
  93
  94         local rlist= r
  95         json_get_values rate_list supported_rates
  96         for r in $rate_list; do
  97                 hostapd_add_rate rlist "$r"
  98         done
  99
 100         [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 101         [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 102         [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
 103
 104         cat > "$config" <<EOF
 105 driver=$driver
 106 $base_cfg
 107 EOF
 108 }
 109
 110 hostapd_common_add_bss_config() {
 111         config_add_string 'bssid:macaddr' 'ssid:string'
 112         config_add_boolean wds wmm uapsd hidden
 113
 114         config_add_int maxassoc max_inactivity
 115         config_add_boolean disassoc_low_ack isolate short_preamble
 116
 117         config_add_int \
 118                 wep_rekey eap_reauth_period \
 119                 wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 120
 121         config_add_boolean rsn_preauth auth_cache
 122         config_add_int ieee80211w
 123
 124         config_add_string 'auth_server:host' 'server:host'
 125         config_add_string auth_secret
 126         config_add_int 'auth_port:port' 'port:port'
 127
 128         config_add_string acct_server
 129         config_add_string acct_secret
 130         config_add_int acct_port
 131
 132         config_add_string dae_client
 133         config_add_string dae_secret
 134         config_add_int dae_port
 135
 136         config_add_string nasid
 137         config_add_string ownip
 138         config_add_string iapp_interface
 139         config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
 140
 141         config_add_int dynamic_vlan vlan_naming
 142         config_add_string vlan_tagged_interface vlan_bridge
 143
 144         config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 145
 146         config_add_string wpa_psk_file
 147
 148         config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
 149         config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 150
 151         config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
 152
 153         config_add_string macfilter 'macfile:file'
 154         config_add_array 'maclist:list(macaddr)'
 155
 156         config_add_int mcast_rate
 157         config_add_array basic_rate
 158         config_add_array supported_rates
 159 }
 160
 161 hostapd_set_bss_options() {
 162         local var="$1"
 163         local phy="$2"
 164         local vif="$3"
 165
 166         wireless_vif_parse_encryption
 167
 168         local bss_conf
 169         local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 170
 171         json_get_vars \
 172                 wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
 173                 maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
 174                 wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
 175                 wps_device_type wps_device_name wps_manufacturer wps_pin \
 176                 macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
 177                 iapp_interface
 178
 179         set_default isolate 0
 180         set_default maxassoc 0
 181         set_default max_inactivity 0
 182         set_default short_preamble 1
 183         set_default disassoc_low_ack 1
 184         set_default hidden 0
 185         set_default wmm 1
 186         set_default uapsd 1
 187
 188         append bss_conf "ctrl_interface=/var/run/hostapd"
 189         if [ "$isolate" -gt 0 ]; then
 190                 append bss_conf "ap_isolate=$isolate" "$N"
 191         fi
 192         if [ "$maxassoc" -gt 0 ]; then
 193                 append bss_conf "max_num_sta=$maxassoc" "$N"
 194         fi
 195         if [ "$max_inactivity" -gt 0 ]; then
 196                 append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
 197         fi
 198
 199         append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
 200         append bss_conf "preamble=$short_preamble" "$N"
 201         append bss_conf "wmm_enabled=$wmm" "$N"
 202         append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
 203         append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 204
 205         [ "$wpa" -gt 0 ] && {
 206                 [ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
 207                 [ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 208                 [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 209         }
 210
 211         case "$auth_type" in
 212                 none)
 213                         wps_possible=1
 214                         # Here we make the assumption that if we're in open mode
 215                         # with WPS enabled, we got to be in unconfigured state.
 216                         wps_not_configured=1
 217                 ;;
 218                 psk)
 219                         json_get_vars key wpa_psk_file
 220                         if [ ${#key} -lt 8 ]; then
 221                                 wireless_setup_vif_failed INVALID_WPA_PSK
 222                                 return 1
 223                         elif [ ${#key} -eq 64 ]; then
 224                                 append bss_conf "wpa_psk=$key" "$N"
 225                         else
 226                                 append bss_conf "wpa_passphrase=$key" "$N"
 227                         fi
 228                         [ -n "$wpa_psk_file" ] && {
 229                                 [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
 230                                 append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
 231                         }
 232                         wps_possible=1
 233                 ;;
 234                 eap)
 235                         json_get_vars \
 236                                 auth_server auth_secret auth_port \
 237                                 acct_server acct_secret acct_port \
 238                                 dae_client dae_secret dae_port \
 239                                 nasid ownip \
 240                                 eap_reauth_period dynamic_vlan \
 241                                 vlan_naming vlan_tagged_interface \
 242                                 vlan_bridge
 243
 244                         # legacy compatibility
 245                         [ -n "$auth_server" ] || json_get_var auth_server server
 246                         [ -n "$auth_port" ] || json_get_var auth_port port
 247                         [ -n "$auth_secret" ] || json_get_var auth_secret key
 248
 249                         set_default auth_port 1812
 250                         set_default acct_port 1813
 251                         set_default dae_port 3799
 252
 253                         set_default vlan_naming 1
 254
 255                         append bss_conf "auth_server_addr=$auth_server" "$N"
 256                         append bss_conf "auth_server_port=$auth_port" "$N"
 257                         append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
 258
 259                         [ -n "$acct_server" ] && {
 260                                 append bss_conf "acct_server_addr=$acct_server" "$N"
 261                                 append bss_conf "acct_server_port=$acct_port" "$N"
 262                                 [ -n "$acct_secret" ] && \
 263                                         append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 264                         }
 265
 266                         [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
 267
 268                         [ -n "$dae_client" -a -n "$dae_secret" ] && {
 269                                 append bss_conf "radius_das_port=$dae_port" "$N"
 270                                 append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
 271                         }
 272
 273                         append bss_conf "nas_identifier=$nasid" "$N"
 274                         [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
 275                         append bss_conf "eapol_key_index_workaround=1" "$N"
 276                         append bss_conf "ieee8021x=1" "$N"
 277                         append bss_conf "wpa_key_mgmt=WPA-EAP" "$N"
 278
 279                         [ -n "$dynamic_vlan" ] && {
 280                                 append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
 281                                 append bss_conf "vlan_naming=$vlan_naming" "$N"
 282                                 [ -n "$vlan_bridge" ] && \
 283                                         append bss_conf "vlan_bridge=$vlan_bridge" "$N"
 284                                 [ -n "$vlan_tagged_interface" ] && \
 285                                         append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
 286                         }
 287                 ;;
 288                 wep)
 289                         local wep_keyidx=0
 290                         json_get_vars key
 291                         hostapd_append_wep_key bss_conf
 292                         append bss_conf "wep_default_key=$wep_keyidx" "$N"
 293                         [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 294                 ;;
 295         esac
 296
 297         local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
 298         append bss_conf "auth_algs=${auth_algs:-1}" "$N"
 299         append bss_conf "wpa=$wpa" "$N"
 300         [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
 301
 302         set_default wps_pushbutton 0
 303         set_default wps_label 0
 304         set_default wps_pbc_in_m1 0
 305
 306         config_methods=
 307         [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
 308         [ "$wps_label" -gt 0 ] && append config_methods label
 309
 310         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 311                 set_default ext_registrar 0
 312                 set_default wps_device_type "6-0050F204-1"
 313                 set_default wps_device_name "OpenWrt AP"
 314                 set_default wps_manufacturer "openwrt.org"
 315
 316                 wps_state=2
 317                 [ -n "$wps_configured" ] && wps_state=1
 318
 319                 [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
 320
 321                 append bss_conf "eap_server=1" "$N"
 322                 [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
 323                 append bss_conf "wps_state=$wps_state" "$N"
 324                 append bss_conf "ap_setup_locked=0" "$N"
 325                 append bss_conf "device_type=$wps_device_type" "$N"
 326                 append bss_conf "device_name=$wps_device_name" "$N"
 327                 append bss_conf "manufacturer=$wps_manufacturer" "$N"
 328                 append bss_conf "config_methods=$config_methods" "$N"
 329                 [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
 330         }
 331
 332         append bss_conf "ssid=$ssid" "$N"
 333         [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
 334         [ -n "$iapp_interface" ] && {
 335                 iapp_interface="$(uci_get_state network "$iapp_interface" ifname "$iapp_interface")"
 336                 [ -n "$iapp_interface" ] && append bss_conf "iapp_interface=$iapp_interface" "$N"
 337         }
 338
 339         if [ "$wpa" -ge "2" ]; then
 340                 if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 341                         set_default auth_cache 1
 342                         append bss_conf "rsn_preauth=1" "$N"
 343                         append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
 344                 else
 345                         set_default auth_cache 0
 346                 fi
 347
 348                 append bss_conf "okc=$auth_cache" "$N"
 349                 [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 350
 351                 # RSN -> allow management frame protection
 352                 json_get_var ieee80211w ieee80211w
 353                 case "$ieee80211w" in
 354                         [012])
 355                                 json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
 356                                 append bss_conf "ieee80211w=$ieee80211w" "$N"
 357                                 [ "$ieee80211w" -gt "0" ] && {
 358                                         [ -n "$ieee80211w_max_timeout" ] && \
 359                                                 append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 360                                         [ -n "$ieee80211w_retry_timeout" ] && \
 361                                                 append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 362                                 }
 363                         ;;
 364                 esac
 365         fi
 366
 367         _macfile="/var/run/hostapd-$ifname.maclist"
 368         case "$macfilter" in
 369                 allow)
 370                         append bss_conf "macaddr_acl=1" "$N"
 371                         append bss_conf "accept_mac_file=$_macfile" "$N"
 372                 ;;
 373                 deny)
 374                         append bss_conf "macaddr_acl=0" "$N"
 375                         append bss_conf "deny_mac_file=$_macfile" "$N"
 376                 ;;
 377                 *)
 378                         _macfile=""
 379                 ;;
 380         esac
 381
 382         [ -n "$_macfile" ] && {
 383                 json_get_vars macfile
 384                 json_get_values maclist maclist
 385
 386                 rm -f "$_macfile"
 387                 (
 388                         for mac in $maclist; do
 389                                 echo "$mac"
 390                         done
 391                         [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
 392                 ) > "$_macfile"
 393         }
 394
 395         append "$var" "$bss_conf" "$N"
 396         return 0
 397 }
 398
 399 hostapd_set_log_options() {
 400         local var="$1"
 401
 402         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 403         json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 404
 405         set_default log_level 2
 406         set_default log_80211  1
 407         set_default log_8021x  1
 408         set_default log_radius 1
 409         set_default log_wpa    1
 410         set_default log_driver 1
 411         set_default log_iapp   1
 412         set_default log_mlme   1
 413
 414         local log_mask=$(( \
 415                 ($log_80211  << 0) | \
 416                 ($log_8021x  << 1) | \
 417                 ($log_radius << 2) | \
 418                 ($log_wpa    << 3) | \
 419                 ($log_driver << 4) | \
 420                 ($log_iapp   << 5) | \
 421                 ($log_mlme   << 6)   \
 422         ))
 423
 424         append "$var" "logger_syslog=$log_mask" "$N"
 425         append "$var" "logger_syslog_level=$log_level" "$N"
 426         append "$var" "logger_stdout=$log_mask" "$N"
 427         append "$var" "logger_stdout_level=$log_level" "$N"
 428
 429         return 0
 430 }
 431
 432 _wpa_supplicant_common() {
 433         local ifname="$1"
 434
 435         _rpath="/var/run/wpa_supplicant"
 436         _config="${_rpath}-$ifname.conf"
 437 }
 438
 439 wpa_supplicant_teardown_interface() {
 440         _wpa_supplicant_common "$1"
 441         rm -rf "$_rpath/$1" "$_config"
 442 }
 443
 444 wpa_supplicant_prepare_interface() {
 445         local ifname="$1"
 446         _w_driver="$2"
 447
 448         _wpa_supplicant_common "$1"
 449
 450         json_get_vars mode wds
 451
 452         [ -n "$network_bridge" ] && {
 453                 fail=
 454                 case "$mode" in
 455                         adhoc)
 456                                 fail=1
 457                         ;;
 458                         sta)
 459                                 [ "$wds" = 1 ] || fail=1
 460                         ;;
 461                 esac
 462
 463                 [ -n "$fail" ] && {
 464                         wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
 465                         return 1
 466                 }
 467         }
 468
 469         local ap_scan=
 470
 471         _w_mode="$mode"
 472         _w_modestr=
 473
 474         [[ "$mode" = adhoc ]] && {
 475                 ap_scan="ap_scan=2"
 476
 477                 _w_modestr="mode=1"
 478         }
 479
 480         wpa_supplicant_teardown_interface "$ifname"
 481         cat > "$_config" <<EOF
 482 $ap_scan
 483 EOF
 484         return 0
 485 }
 486
 487 wpa_supplicant_add_network() {
 488         local ifname="$1"
 489
 490         _wpa_supplicant_common "$1"
 491         wireless_vif_parse_encryption
 492
 493         json_get_vars \
 494                 ssid bssid key \
 495                 basic_rate mcast_rate \
 496                 ieee80211w
 497
 498         local key_mgmt='NONE'
 499         local enc_str=
 500         local network_data=
 501         local T="       "
 502
 503         local wpa_key_mgmt="WPA-PSK"
 504         local scan_ssid="1"
 505         local freq
 506
 507         [[ "$_w_mode" = "adhoc" ]] && {
 508                 append network_data "mode=1" "$N$T"
 509                 [ -n "$channel" ] && {
 510                         freq="$(get_freq "$phy" "$channel")"
 511                         append network_data "fixed_freq=1" "$N$T"
 512                         append network_data "frequency=$freq" "$N$T"
 513                 }
 514
 515                 scan_ssid=0
 516
 517                 [ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
 518         }
 519
 520         [[ "$_w_mode" = adhoc ]] && append network_data "$_w_modestr" "$N$T"
 521
 522         case "$auth_type" in
 523                 none) ;;
 524                 wep)
 525                         local wep_keyidx=0
 526                         hostapd_append_wep_key network_data
 527                         append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
 528                 ;;
 529                 psk)
 530                         local passphrase
 531
 532                         key_mgmt="$wpa_key_mgmt"
 533                         if [ ${#key} -eq 64 ]; then
 534                                 passphrase="psk=${key}"
 535                         else
 536                                 passphrase="psk=\"${key}\""
 537                         fi
 538                         append network_data "$passphrase" "$N$T"
 539                 ;;
 540                 eap)
 541                         key_mgmt='WPA-EAP'
 542
 543                         json_get_vars eap_type identity ca_cert
 544                         [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
 545                         [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
 546                         case "$eap_type" in
 547                                 tls)
 548                                         json_get_vars client_cert priv_key priv_key_pwd
 549                                         append network_data "client_cert=\"$client_cert\"" "$N$T"
 550                                         append network_data "private_key=\"$priv_key\"" "$N$T"
 551                                         append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
 552                                 ;;
 553                                 peap|ttls)
 554                                         json_get_vars auth password
 555                                         set_default auth MSCHAPV2
 556                                         append network_data "phase2=\"$auth\"" "$N$T"
 557                                         append network_data "password=\"$password\"" "$N$T"
 558                                 ;;
 559                         esac
 560                         append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
 561                 ;;
 562         esac
 563
 564         case "$wpa" in
 565                 1)
 566                         append network_data "proto=WPA" "$N$T"
 567                 ;;
 568                 2)
 569                         append network_data "proto=RSN" "$N$T"
 570                 ;;
 571         esac
 572
 573         case "$ieee80211w" in
 574                 [012])
 575                         [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
 576                 ;;
 577         esac
 578
 579         local beacon_int brates mrate
 580         [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
 581         [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
 582
 583
 584         [ -n "$basic_rate" ] && {
 585                 local br rate_list=
 586                 for br in $basic_rate; do
 587                         wpa_supplicant_add_rate rate_list "$br"
 588                 done
 589                 [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
 590         }
 591
 592         [ -n "$mcast_rate" ] && {
 593                 local mc_rate=
 594                 wpa_supplicant_add_rate mc_rate "$mcast_rate"
 595                 append network_data "mcast_rate=$mc_rate" "$N$T"
 596         }
 597
 598         local ht_str
 599         [ -n "$ht" ] && append network_data "htmode=$ht" "$N$T"
 600
 601         cat >> "$_config" <<EOF
 602 network={
 603         scan_ssid=$scan_ssid
 604         ssid="$ssid"
 605         key_mgmt=$key_mgmt
 606         $network_data
 607 }
 608 EOF
 609         return 0
 610 }
 611
 612 wpa_supplicant_run() {
 613         local ifname="$1"; shift
 614
 615         _wpa_supplicant_common "$ifname"
 616
 617         /usr/sbin/wpa_supplicant -B \
 618                 ${network_bridge:+-b $network_bridge} \
 619                 -P "/var/run/wpa_supplicant-${ifname}.pid" \
 620                 -D ${_w_driver:-wext} \
 621                 -i "$ifname" \
 622                 -c "$_config" \
 623                 -C "$_rpath" \
 624                 "$@"
 625
 626         ret="$?"
 627         wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
 628
 629         [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
 630
 631         return $ret
 632 }
 633
 634 hostapd_common_cleanup() {
 635         killall hostapd wpa_supplicant meshd-nl80211
 636 }