2 # Copyright (C) 2006-2012 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
8 OTHER_MENU:=Other modules
10 WATCHDOG_DIR:=watchdog
13 define KernelPackage/bluetooth
14 SUBMENU:=$(OTHER_MENU)
15 TITLE:=Bluetooth support
16 DEPENDS:=@USB_SUPPORT +kmod-usb-core
23 CONFIG_BLUEZ_HCIUART \
34 CONFIG_BT_HCIUART_H4 \
37 $(call AddDepends/crc16)
38 $(call AddDepends/hid)
39 $(call AddDepends/rfkill)
41 $(LINUX_DIR)/net/bluetooth/bluetooth.ko \
42 $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
43 $(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
44 $(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
45 $(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
46 $(LINUX_DIR)/drivers/bluetooth/btusb.ko
47 AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
50 define KernelPackage/bluetooth/description
51 Kernel support for Bluetooth devices
54 $(eval $(call KernelPackage,bluetooth))
57 define KernelPackage/bluetooth-hci-h4p
58 SUBMENU:=$(OTHER_MENU)
59 TITLE:=HCI driver with H4 Nokia extensions
60 DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
61 KCONFIG:=CONFIG_BT_HCIH4P
62 FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
63 AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
66 define KernelPackage/bluetooth-hci-h4p/description
67 HCI driver with H4 Nokia extensions
70 $(eval $(call KernelPackage,bluetooth-hci-h4p))
73 define KernelPackage/eeprom-93cx6
74 SUBMENU:=$(OTHER_MENU)
75 TITLE:=EEPROM 93CX6 support
76 KCONFIG:=CONFIG_EEPROM_93CX6
77 FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
78 AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
81 define KernelPackage/eeprom-93cx6/description
82 Kernel module for EEPROM 93CX6 support
85 $(eval $(call KernelPackage,eeprom-93cx6))
88 define KernelPackage/eeprom-at24
89 SUBMENU:=$(OTHER_MENU)
90 TITLE:=EEPROM AT24 support
91 KCONFIG:=CONFIG_EEPROM_AT24
92 DEPENDS:=+kmod-i2c-core
93 FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
94 AUTOLOAD:=$(call AutoLoad,60,at24)
97 define KernelPackage/eeprom-at24/description
98 Kernel module for most I2C EEPROMs
101 $(eval $(call KernelPackage,eeprom-at24))
104 define KernelPackage/eeprom-at25
105 SUBMENU:=$(OTHER_MENU)
106 TITLE:=EEPROM AT25 support
107 KCONFIG:=CONFIG_EEPROM_AT25
108 FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
109 AUTOLOAD:=$(call AutoLoad,61,at25)
112 define KernelPackage/eeprom-at25/description
113 Kernel module for most SPI EEPROMs
116 $(eval $(call KernelPackage,eeprom-at25))
119 define KernelPackage/gpio-dev
120 SUBMENU:=$(OTHER_MENU)
121 TITLE:=Generic GPIO char device support
122 DEPENDS:=@GPIO_SUPPORT
123 KCONFIG:=CONFIG_GPIO_DEVICE
124 FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
125 AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
128 define KernelPackage/gpio-dev/description
129 Kernel module to allows control of GPIO pins using a character device.
132 $(eval $(call KernelPackage,gpio-dev))
135 define KernelPackage/gpio-nxp-74hc164
136 SUBMENU:=$(OTHER_MENU)
137 TITLE:=NXP 74HC164 GPIO expander support
138 KCONFIG:=CONFIG_GPIO_NXP_74HC164
139 FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
140 AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
143 define KernelPackage/gpio-nxp-74hc164/description
144 Kernel module for NXP 74HC164 GPIO expander
147 $(eval $(call KernelPackage,gpio-nxp-74hc164))
149 define KernelPackage/hid
150 SUBMENU:=$(OTHER_MENU)
153 FILES:=$(LINUX_DIR)/drivers/hid/hid.ko
154 AUTOLOAD:=$(call AutoLoad,61,hid)
155 $(call AddDepends/input,+kmod-input-evdev)
158 define KernelPackage/hid/description
159 Kernel modules for HID devices
162 $(eval $(call KernelPackage,hid))
165 define KernelPackage/input-core
166 SUBMENU:=$(OTHER_MENU)
167 TITLE:=Input device core
168 KCONFIG:=CONFIG_INPUT
169 FILES:=$(LINUX_DIR)/drivers/input/input-core.ko
170 AUTOLOAD:=$(call AutoLoad,19,input-core)
173 define KernelPackage/input-core/description
174 Kernel modules for support of input device
177 $(eval $(call KernelPackage,input-core))
180 define KernelPackage/input-evdev
181 SUBMENU:=$(OTHER_MENU)
182 TITLE:=Input event device
183 KCONFIG:=CONFIG_INPUT_EVDEV
184 FILES:=$(LINUX_DIR)/drivers/input/evdev.ko
185 AUTOLOAD:=$(call AutoLoad,60,evdev)
186 $(call AddDepends/input)
189 define KernelPackage/input-evdev/description
190 Kernel modules for support of input device events
193 $(eval $(call KernelPackage,input-evdev))
196 define KernelPackage/input-gpio-buttons
197 SUBMENU:=$(OTHER_MENU)
198 TITLE:=Polled GPIO buttons input device
199 DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
201 CONFIG_INPUT_GPIO_BUTTONS \
203 FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.ko
204 AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
207 define KernelPackage/input-gpio-buttons/description
208 Kernel module for support polled GPIO buttons input device
211 $(eval $(call KernelPackage,input-gpio-buttons))
214 define KernelPackage/input-gpio-keys
215 SUBMENU:=$(OTHER_MENU)
216 TITLE:=GPIO key support
217 DEPENDS:= @GPIO_SUPPORT
219 CONFIG_KEYBOARD_GPIO \
220 CONFIG_INPUT_KEYBOARD=y
221 FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
222 AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
223 $(call AddDepends/input)
226 define KernelPackage/input-gpio-keys/description
227 This driver implements support for buttons connected
228 to GPIO pins of various CPUs (and some other chips).
231 $(eval $(call KernelPackage,input-gpio-keys))
234 define KernelPackage/input-gpio-keys-polled
235 SUBMENU:=$(OTHER_MENU)
236 TITLE:=Polled GPIO key support
237 DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
239 CONFIG_KEYBOARD_GPIO_POLLED \
240 CONFIG_INPUT_KEYBOARD=y
241 FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
242 AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
243 $(call AddDepends/input)
246 define KernelPackage/input-gpio-keys-polled/description
247 Kernel module for support polled GPIO keys input device
250 $(eval $(call KernelPackage,input-gpio-keys-polled))
253 define KernelPackage/input-gpio-encoder
254 SUBMENU:=$(OTHER_MENU)
255 TITLE:=GPIO rotay encoder
256 KCONFIG:=CONFIG_INPUT_GPIO_ROTARY_ENCODER
257 FILES:=$(LINUX_DIR)/drivers/input/misc/rotary_encoder.ko
258 AUTOLOAD:=$(call AutoLoad,62,rotary_encoder)
259 $(call AddDepends/input,@GPIO_SUPPORT)
262 define KernelPackage/gpio-encoder/description
263 Kernel module to use rotary encoders connected to GPIO pins
266 $(eval $(call KernelPackage,input-gpio-encoder))
269 define KernelPackage/input-joydev
270 SUBMENU:=$(OTHER_MENU)
271 TITLE:=Joystick device support
272 KCONFIG:=CONFIG_INPUT_JOYDEV
273 FILES:=$(LINUX_DIR)/drivers/input/joydev.ko
274 AUTOLOAD:=$(call AutoLoad,62,joydev)
275 $(call AddDepends/input)
278 define KernelPackage/input-joydev/description
279 Kernel module for joystick support
282 $(eval $(call KernelPackage,input-joydev))
285 define KernelPackage/input-polldev
286 SUBMENU:=$(OTHER_MENU)
287 TITLE:=Polled Input device support
288 KCONFIG:=CONFIG_INPUT_POLLDEV
289 FILES:=$(LINUX_DIR)/drivers/input/input-polldev.ko
290 AUTOLOAD:=$(call AutoLoad,20,input-polldev)
291 $(call AddDepends/input)
294 define KernelPackage/input-polldev/description
295 Kernel module for support of polled input devices
298 $(eval $(call KernelPackage,input-polldev))
301 define KernelPackage/lp
302 SUBMENU:=$(OTHER_MENU)
303 TITLE:=Parallel port and line printer support
310 $(LINUX_DIR)/drivers/parport/parport.ko \
311 $(LINUX_DIR)/drivers/char/lp.ko \
312 $(LINUX_DIR)/drivers/char/ppdev.ko
313 AUTOLOAD:=$(call AutoLoad,50,parport lp)
316 $(eval $(call KernelPackage,lp))
319 define KernelPackage/mmc
320 SUBMENU:=$(OTHER_MENU)
321 TITLE:=MMC/SD Card Support
326 CONFIG_MMC_UNSAFE_RESUME=n \
327 CONFIG_MMC_BLOCK_BOUNCE=y \
329 CONFIG_MMC_TIFM_SD=n \
333 $(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
334 $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
335 AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
338 define KernelPackage/mmc/description
339 Kernel support for MMC/SD cards
342 $(eval $(call KernelPackage,mmc))
345 define KernelPackage/oprofile
346 SUBMENU:=$(OTHER_MENU)
347 TITLE:=OProfile profiling support
348 KCONFIG:=CONFIG_OPROFILE
349 FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
350 DEPENDS:=@KERNEL_PROFILING
353 define KernelPackage/oprofile/description
354 Kernel module for support for oprofile system profiling.
357 $(eval $(call KernelPackage,oprofile))
360 define KernelPackage/rfkill
361 SUBMENU:=$(OTHER_MENU)
362 TITLE:=RF switch subsystem support
365 CONFIG_RFKILL_INPUT=y \
368 $(LINUX_DIR)/net/rfkill/rfkill.ko
369 AUTOLOAD:=$(call AutoLoad,20,rfkill)
370 $(call SetDepends/rfkill)
373 define KernelPackage/rfkill/description
374 Say Y here if you want to have control over RF switches
375 found on many WiFi and Bluetooth cards.
378 $(eval $(call KernelPackage,rfkill))
381 define KernelPackage/softdog
382 SUBMENU:=$(OTHER_MENU)
383 TITLE:=Software watchdog driver
384 KCONFIG:=CONFIG_SOFT_WATCHDOG
385 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
386 AUTOLOAD:=$(call AutoLoad,50,softdog)
389 define KernelPackage/softdog/description
390 Software watchdog driver
393 $(eval $(call KernelPackage,softdog))
396 define KernelPackage/ssb
397 SUBMENU:=$(OTHER_MENU)
398 TITLE:=Silicon Sonics Backplane glue code
399 DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
402 CONFIG_SSB_B43_PCI_BRIDGE=y \
403 CONFIG_SSB_DRIVER_MIPS=n \
404 CONFIG_SSB_DRIVER_PCICORE=y \
405 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
406 CONFIG_SSB_PCIHOST=y \
407 CONFIG_SSB_PCIHOST_POSSIBLE=y \
408 CONFIG_SSB_POSSIBLE=y \
411 FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
412 AUTOLOAD:=$(call AutoLoad,29,ssb)
415 define KernelPackage/ssb/description
416 Silicon Sonics Backplane glue code.
419 $(eval $(call KernelPackage,ssb))
422 define KernelPackage/bcma
423 SUBMENU:=$(OTHER_MENU)
425 DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
428 CONFIG_BCMA_POSSIBLE=y \
429 CONFIG_BCMA_BLOCKIO=y \
430 CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
431 CONFIG_BCMA_HOST_PCI=y \
432 CONFIG_BCMA_DRIVER_MIPS=n \
433 CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
434 CONFIG_BCMA_DRIVER_GMAC_CMN=n \
436 FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
437 AUTOLOAD:=$(call AutoLoad,29,bcma)
440 define KernelPackage/bcma/description
441 Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
444 $(eval $(call KernelPackage,bcma))
447 define KernelPackage/wdt-omap
448 SUBMENU:=$(OTHER_MENU)
449 TITLE:=OMAP Watchdog timer
450 DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
451 KCONFIG:=CONFIG_OMAP_WATCHDOG
452 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
453 AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
456 define KernelPackage/wdt-omap/description
457 Kernel module for TI omap watchdog timer.
460 $(eval $(call KernelPackage,wdt-omap))
463 define KernelPackage/wdt-orion
464 SUBMENU:=$(OTHER_MENU)
465 TITLE:=Marvell Orion Watchdog timer
466 DEPENDS:=@TARGET_orion||@TARGET_kirkwood
467 KCONFIG:=CONFIG_ORION_WATCHDOG
468 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
469 AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
472 define KernelPackage/wdt-orion/description
473 Kernel module for Marvell orion watchdog timer.
476 $(eval $(call KernelPackage,wdt-orion))
479 define KernelPackage/booke-wdt
480 SUBMENU:=$(OTHER_MENU)
481 TITLE:=PowerPC Book-E Watchdog Timer
482 DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
483 KCONFIG:=CONFIG_BOOKE_WDT
484 FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
485 AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
488 define KernelPackage/booke-wdt/description
489 Kernel module for PowerPC Book-E Watchdog Timer.
492 $(eval $(call KernelPackage,booke-wdt))
495 define KernelPackage/pwm
496 SUBMENU:=$(OTHER_MENU)
497 TITLE:=PWM generic API
498 KCONFIG:=CONFIG_GENERIC_PWM
499 FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
500 AUTOLOAD:=$(call AutoLoad,50,pwm)
503 define KernelPackage/pwm/description
504 Kernel module that implement a generic PWM API
507 $(eval $(call KernelPackage,pwm))
510 define KernelPackage/pwm-gpio
511 SUBMENU:=$(OTHER_MENU)
514 KCONFIG:=CONFIG_GPIO_PWM
515 FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
516 AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
519 define KernelPackage/pwm-gpio/description
520 Kernel module to models a single-channel PWM device using a timer and a GPIO pin
523 $(eval $(call KernelPackage,pwm-gpio))
526 define KernelPackage/rtc-marvell
527 SUBMENU:=$(OTHER_MENU)
528 TITLE:=Marvell SoC built-in RTC support
529 $(call AddDepends/rtc)
530 DEPENDS+=@TARGET_kirkwood||TARGET_orion
531 KCONFIG:=CONFIG_RTC_DRV_MV
532 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
533 AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
536 define KernelPackage/rtc-marvell/description
537 Kernel module for Marvell SoC built-in RTC.
540 $(eval $(call KernelPackage,rtc-marvell))
542 define KernelPackage/rtc-pcf8563
543 SUBMENU:=$(OTHER_MENU)
544 TITLE:=Philips PCF8563/Epson RTC8564 RTC support
545 $(call AddDepends/rtc)
546 KCONFIG:=CONFIG_RTC_DRV_PCF8563
547 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
548 AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
551 define KernelPackage/rtc-pcf8563/description
552 Kernel module for Philips PCF8563 RTC chip.
553 The Epson RTC8564 should work as well.
556 $(eval $(call KernelPackage,rtc-pcf8563))
559 define KernelPackage/rtc-pcf2123
560 SUBMENU:=$(OTHER_MENU)
561 TITLE:=Philips PCF2123 RTC support
562 $(call AddDepends/rtc)
563 KCONFIG:=CONFIG_RTC_DRV_PCF2123
564 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
565 AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
568 define KernelPackage/rtc-pcf2123/description
569 Kernel module for Philips PCF2123 RTC chip.
572 $(eval $(call KernelPackage,rtc-pcf2123))
574 define KernelPackage/rtc-pt7c4338
575 SUBMENU:=$(OTHER_MENU)
576 TITLE:=Pericom PT7C4338 RTC support
577 $(call AddDepends/rtc,+kmod-i2c-core)
578 KCONFIG:=CONFIG_RTC_DRV_PT7C4338
579 FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
580 AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
583 define KernelPackage/rtc-pt7c4338/description
584 Kernel module for Pericom PT7C4338 i2c RTC chip.
587 $(eval $(call KernelPackage,rtc-pt7c4338))
590 define KernelPackage/mtdtests
591 SUBMENU:=$(OTHER_MENU)
592 TITLE:=MTD subsystem tests
593 KCONFIG:=CONFIG_MTD_TESTS
595 $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
596 $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
597 $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
598 $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
599 $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
600 $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
601 $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
602 $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
605 define KernelPackage/mtdtests/description
606 Kernel modules for MTD subsystem/driver testing.
609 $(eval $(call KernelPackage,mtdtests))
612 define KernelPackage/nand
613 SUBMENU:=$(OTHER_MENU)
614 TITLE:=NAND flash support
615 DEPENDS:=@!LINUX_2_6_39
616 KCONFIG:=CONFIG_MTD_NAND \
617 CONFIG_MTD_NAND_IDS \
620 $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
621 $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
622 $(LINUX_DIR)/drivers/mtd/nand/nand.ko
623 AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
626 define KernelPackage/nand/description
627 Kernel module for NAND support.
630 $(eval $(call KernelPackage,nand))
633 define KernelPackage/nandsim
634 SUBMENU:=$(OTHER_MENU)
635 TITLE:=NAND simulator
637 KCONFIG:=CONFIG_MTD_NAND_NANDSIM
638 FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
641 define KernelPackage/nandsim/description
642 Kernel module for NAND flash simulation.
645 $(eval $(call KernelPackage,nandsim))
647 define KernelPackage/serial-8250
648 SUBMENU:=$(OTHER_MENU)
650 KCONFIG:= CONFIG_SERIAL_8250 \
651 CONFIG_SERIAL_8250_NR_UARTS=16 \
652 CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
653 CONFIG_SERIAL_8250_EXTENDED=y \
654 CONFIG_SERIAL_8250_MANY_PORTS=y \
655 CONFIG_SERIAL_8250_SHARE_IRQ=y \
656 CONFIG_SERIAL_8250_DETECT_IRQ=n \
657 CONFIG_SERIAL_8250_RSA=n
658 FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
661 define KernelPackage/serial-8250/description
662 Kernel module for 8250 UART based serial ports.
665 $(eval $(call KernelPackage,serial-8250))
668 define KernelPackage/acpi-button
669 SUBMENU:=$(OTHER_MENU)
670 TITLE:=ACPI Button Support
671 DEPENDS:=@(TARGET_x86_generic||TARGET_x86_kvm_guest||TARGET_x86_xen_domu) +kmod-input-evdev
672 KCONFIG:=CONFIG_ACPI_BUTTON
673 FILES:=$(LINUX_DIR)/drivers/acpi/button.ko
674 AUTOLOAD:=$(call AutoLoad,06,button)
677 define KernelPackage/acpi-button/description
678 Kernel module for ACPI Button support
681 $(eval $(call KernelPackage,acpi-button))
683 define KernelPackage/regmap
684 SUBMENU:=$(OTHER_MENU)
685 TITLE:=Generic register map support
686 KCONFIG:=CONFIG_REGMAP=y \
689 FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
690 $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
691 AUTOLOAD:=$(call AutoLoad,10,regmap-i2c regmap-spi)
694 define KernelPackage/regmap/description
695 Generic register map support
698 $(eval $(call KernelPackage,regmap))