package/base-files/files/bin/config_generate

   1 #!/bin/sh
   2
   3 CFG=/etc/board.json
   4
   5 . /usr/share/libubox/jshn.sh
   6
   7 [ -f $CFG ] || exit 1
   8
   9 generate_static_network() {
  10         uci -q batch <<-EOF
  11                 delete network.loopback
  12                 set network.loopback='interface'
  13                 set network.loopback.ifname='lo'
  14                 set network.loopback.proto='static'
  15                 set network.loopback.ipaddr='127.0.0.1'
  16                 set network.loopback.netmask='255.0.0.0'
  17                 delete network.globals
  18                 set network.globals='globals'
  19                 set network.globals.ula_prefix='auto'
  20         EOF
  21
  22         if json_is_a dsl object; then
  23                 json_select dsl
  24                         if json_is_a atmbridge object; then
  25                                 json_select atmbridge
  26                                         local vpi vci encaps payload
  27                                         json_get_vars vpi vci encaps payload
  28                                         uci -q batch <<-EOF
  29                                                 delete network.atm
  30                                                 set network.atm='atm-bridge'
  31                                                 set network.atm.vpi='$vpi'
  32                                                 set network.atm.vci='$vci'
  33                                                 set network.atm.encaps='$encaps'
  34                                                 set network.atm.payload='$payload'
  35                                         EOF
  36                                 json_select ..
  37                         fi
  38
  39                         if json_is_a modem object; then
  40                                 json_select modem
  41                                         local type annex firmware tone xfer_mode
  42                                         json_get_vars type annex firmware tone xfer_mode
  43                                         uci -q batch <<-EOF
  44                                                 delete network.dsl
  45                                                 set network.dsl='$type'
  46                                                 set network.dsl.annex='$annex'
  47                                                 set network.dsl.firmware='$firmware'
  48                                                 set network.dsl.tone='$tone'
  49                                                 set network.dsl.xfer_mode='$xfer_mode'
  50                                         EOF
  51                                 json_select ..
  52                         fi
  53                 json_select ..
  54         fi
  55 }
  56
  57 addr_offset=2
  58 generate_network() {
  59         local ifname macaddr protocol type
  60
  61         json_select network
  62                 json_select "$1"
  63                         json_get_vars ifname macaddr protocol
  64                 json_select ..
  65         json_select ..
  66
  67         [ -n "$ifname" ] || return
  68
  69         # force bridge for multi-interface devices (and lan)
  70         case "$1:$ifname" in
  71                 *\ * | lan:*) type="bridge" ;;
  72         esac
  73
  74         uci -q batch <<-EOF
  75                 delete network.$1
  76                 set network.$1='interface'
  77                 set network.$1.type='$type'
  78                 set network.$1.ifname='$ifname'
  79                 set network.$1.proto='none'
  80         EOF
  81
  82         [ -n "$macaddr" ] && uci -q batch <<-EOF
  83                 delete network.$1_dev
  84                 set network.$1_dev='device'
  85                 set network.$1_dev.name='$ifname'
  86                 set network.$1_dev.macaddr='$macaddr'
  87         EOF
  88
  89         case "$protocol" in
  90                 static)
  91                         local ipaddr
  92                         case "$1" in
  93                                 lan) ipaddr="192.168.1.1" ;;
  94                                 *) ipaddr="192.168.$((addr_offset++)).1" ;;
  95                         esac
  96
  97                         uci -q batch <<-EOF
  98                                 set network.$1.proto='static'
  99                                 set network.$1.ipaddr='$ipaddr'
 100                                 set network.$1.netmask='255.255.255.0'
 101                                 set network.$1.ip6assign='60'
 102                         EOF
 103                 ;;
 104
 105                 dhcp)
 106                         # fixup IPv6 slave interface if parent is a bridge
 107                         [ "$type" = "bridge" ] && ifname="br-$1"
 108
 109                         uci -q batch <<-EOF
 110                                 set network.$1.proto='dhcp'
 111                                 delete network.${1}6
 112                                 set network.${1}6='interface'
 113                                 set network.${1}6.ifname='$ifname'
 114                                 set network.${1}6.proto='dhcpv6'
 115                         EOF
 116                 ;;
 117
 118                 pppoe)
 119                         # fixup IPv6 slave interface
 120                         ifname="pppoe-$1"
 121
 122                         uci -q batch <<-EOF
 123                                 set network.$1.proto='pppoe'
 124                                 set network.$1.username='username'
 125                                 set network.$1.password='password'
 126                                 set network.$1.ipv6='auto'
 127                                 delete network.${1}6
 128                                 set network.${1}6='interface'
 129                                 set network.${1}6.ifname='$ifname'
 130                                 set network.${1}6.proto='dhcpv6'
 131                         EOF
 132                 ;;
 133         esac
 134 }
 135
 136 generate_switch_vlans_ports() {
 137         local switch="$1"
 138         local port ports role roles num attr val
 139
 140         #
 141         # autogenerate vlans
 142         #
 143
 144         json_get_keys roles roles
 145         json_select roles
 146
 147         for role in $roles; do
 148                 json_select "$role"
 149                         json_get_vars ports
 150                 json_select ..
 151
 152                 uci -q batch <<-EOF
 153                         add network switch_vlan
 154                         set network.@switch_vlan[-1].device='$switch'
 155                         set network.@switch_vlan[-1].vlan='$role'
 156                         set network.@switch_vlan[-1].ports='$ports'
 157                 EOF
 158         done
 159
 160         json_select ..
 161
 162
 163         #
 164         # write port specific settings
 165         #
 166
 167         json_get_keys ports ports
 168         json_select ports
 169
 170         for port in $ports; do
 171                 json_select "$port"
 172                         json_get_vars num
 173
 174                         if json_is_a attr object; then
 175                                 json_get_keys attr attr
 176                                 json_select attr
 177                                         uci -q batch <<-EOF
 178                                                 add network switch_port
 179                                                 set network.@switch_port[-1].device='$switch'
 180                                                 set network.@switch_port[-1].port=$num
 181                                         EOF
 182
 183                                         for attr in $attr; do
 184                                                 json_get_var val "$attr"
 185                                                 uci -q set network.@switch_port[-1].$attr="$val"
 186                                         done
 187                                 json_select ..
 188                         fi
 189                 json_select ..
 190         done
 191
 192         json_select ..
 193 }
 194
 195 generate_switch() {
 196         local key="$1"
 197         local vlans
 198
 199         json_select switch
 200         json_select "$key"
 201         json_get_vars enable reset blinkrate cpu_port
 202
 203         uci -q batch <<-EOF
 204                 add network switch
 205                 set network.@switch[-1].name='$key'
 206                 set network.@switch[-1].reset='$reset'
 207                 set network.@switch[-1].enable_vlan='$enable'
 208                 set network.@switch[-1].blinkrate='$blinkrate'
 209         EOF
 210
 211         generate_switch_vlans_ports "$1"
 212
 213         json_select ..
 214         json_select ..
 215 }
 216
 217 generate_rssimon() {
 218         local key="$1"
 219         local cfg="rssid_$key"
 220         local refresh threshold
 221
 222         json_select rssimon
 223         json_select "$key"
 224         json_get_vars refresh threshold
 225         json_select ..
 226         json_select ..
 227
 228         uci -q batch <<-EOF
 229                 delete system.$cfg
 230                 set system.$cfg='rssid'
 231                 set system.$cfg.dev='$key'
 232                 set system.$cfg.refresh='$refresh'
 233                 set system.$cfg.threshold='$threshold'
 234         EOF
 235 }
 236
 237 generate_led() {
 238         local key="$1"
 239         local cfg="led_$key"
 240
 241         json_select led
 242         json_select "$key"
 243         json_get_vars name sysfs type trigger default
 244
 245         uci -q batch <<-EOF
 246                 delete system.$cfg
 247                 set system.$cfg='led'
 248                 set system.$cfg.name='$name'
 249                 set system.$cfg.sysfs='$sysfs'
 250                 set system.$cfg.trigger='$trigger'
 251                 set system.$cfg.default='$default'
 252         EOF
 253
 254         case "$type" in
 255                 gpio)
 256                         local gpio inverted
 257                         json_get_vars gpio inverted
 258                         uci -q batch <<-EOF
 259                                 set system.$cfg.trigger='gpio'
 260                                 set system.$cfg.gpio='$gpio'
 261                                 set system.$cfg.inverted='$inverted'
 262                         EOF
 263                 ;;
 264
 265                 netdev)
 266                         local device
 267                         json_get_vars device
 268                         uci -q batch <<-EOF
 269                                 set system.$cfg.trigger='netdev'
 270                                 set system.$cfg.mode='link tx rx'
 271                                 set system.$cfg.dev='$device'
 272                         EOF
 273                 ;;
 274
 275                 usb)
 276                         local device
 277                         json_get_vars device
 278                         uci -q batch <<-EOF
 279                                 set system.$cfg.trigger='usbdev'
 280                                 set system.$cfg.interval='50'
 281                                 set system.$cfg.dev='$device'
 282                         EOF
 283                 ;;
 284
 285                 rssi)
 286                         local iface minq maxq offset factor
 287                         json_get_vars iface minq maxq offset factor
 288                         uci -q batch <<-EOF
 289                                 set system.$cfg.trigger='rssi'
 290                                 set system.$cfg.iface='rssid_$iface'
 291                                 set system.$cfg.minq='$minq'
 292                                 set system.$cfg.maxq='$maxq'
 293                                 set system.$cfg.offset='$offset'
 294                                 set system.$cfg.factor='$factor'
 295                         EOF
 296                 ;;
 297
 298                 switch)
 299                         local port_mask
 300                         json_get_vars port_mask
 301                         uci -q batch <<-EOF
 302                                 set system.$cfg.port_mask='$port_mask'
 303                         EOF
 304                 ;;
 305
 306                 timer|oneshot)
 307                         local delayon delayoff
 308                         json_get_vars delayon delayoff
 309                         uci -q batch <<-EOF
 310                                 set system.$cfg.trigger='$type'
 311                                 set system.$cfg.delayon='$delayon'
 312                                 set system.$cfg.delayoff='$delayoff'
 313                         EOF
 314                 ;;
 315         esac
 316
 317         json_select ..
 318         json_select ..
 319 }
 320
 321 generate_gpioswitch() {
 322         local cfg="$1"
 323
 324         json_select gpioswitch
 325                 json_select "$cfg"
 326                         local name pin default
 327                         json_get_vars name pin default
 328                         uci -q batch <<-EOF
 329                                 delete system.$cfg
 330                                 set system.$cfg='gpio_switch'
 331                                 set system.$cfg.name='$name'
 332                                 set system.$cfg.gpio_pin='$pin'
 333                                 set system.$cfg.default='$default'
 334                         EOF
 335                 json_select ..
 336         json_select ..
 337 }
 338
 339 json_init
 340 json_load "$(cat ${CFG})"
 341
 342 generate_static_network
 343
 344 json_get_keys keys network
 345 for key in $keys; do generate_network $key; done
 346
 347 json_get_keys keys switch
 348 for key in $keys; do generate_switch $key; done
 349
 350 json_get_keys keys rssimon
 351 for key in $keys; do generate_rssimon $key; done
 352
 353 json_get_keys keys gpioswitch
 354 for key in $keys; do generate_gpioswitch $key; done
 355
 356 json_get_keys keys led
 357 for key in $keys; do generate_led $key; done
 358
 359 uci commit