package/base-files/brcm-2.4/etc/init.d/S05netconfig

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2006 OpenWrt.org
   3
   4 start() {
   5         [ -e /etc/config/network ] && exit 0
   6
   7         mkdir -p /etc/config
   8
   9         (
  10                 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
  11                         # WGT634u
  12                         echo boardtype=wgt634u
  13                 else
  14                         strings /dev/mtdblock/3
  15                 fi
  16         ) | awk '
  17         function p(cfgname, name) {
  18                 if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
  19         }
  20
  21         BEGIN {
  22                 FS="="
  23                 c["lan_ifname"]="eth0.0 wl0"
  24                 c["wan_ifname"]="eth0.1"
  25                 c["vlan0ports"]="1 2 3 4 5*"
  26                 c["vlan1ports"]="0 5"
  27         }
  28
  29         ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
  30                 nvram[$1] = $2
  31         }
  32
  33         END {
  34                 # v1 hardware
  35                 if (nvram["boardtype"] == "bcm94710dev") {
  36                         # Asus WL-500g
  37                         if (nvram["boardnum"] == "asusX") {
  38                                 c["lan_ifname"]="eth0 eth1 wl0" # FIXME
  39                                 c["wan_ifname"]=""
  40                         }
  41                 }
  42                 if (nvram["boardtype"] == "wgt634u") {
  43                         c["vlan0ports"] = "0 1 2 3 5*"
  44                         c["vlan1ports"] = "4 5"
  45                         c["lan_ifname"] = "eth0.0 ath0"
  46                 }
  47                 if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
  48                         c["vlan0ports"] = "0 1 2 3 5*"
  49                         c["vlan1ports"] = "4 5"
  50                 }
  51
  52                 # WAP54G
  53                 if ((nvram["boardnum"] == "2") || \
  54                         (nvram["boardnum"] == "1024")) {
  55                         c["lan_ifname"]="eth0 wl0"
  56                         c["wan_ifname"]=""
  57                 }
  58
  59                 print "#### VLAN configuration "
  60                 print "config switch eth0"
  61                 p("vlan0", "vlan0ports")
  62                 p("vlan1", "vlan1ports")
  63                 print ""
  64                 print ""
  65                 print "#### Loopback configuration"
  66                 print "config interface loopback"
  67                 print " option ifname   \"lo\""
  68                 print " option proto    static"
  69                 print " option ipaddr   127.0.0.1"
  70                 print " option netmask  255.0.0.0"
  71                 print ""
  72                 print ""
  73                 print "#### LAN configuration"
  74                 print "config interface lan"
  75                 print " option type     bridge"
  76                 p("ifname", "lan_ifname")
  77                 print " option proto    static"
  78                 print " option ipaddr   192.168.1.1"
  79                 print " option netmask  255.255.255.0"
  80                 print ""
  81                 print ""
  82                 print "#### WAN configuration"
  83                 print "config interface wan"
  84                 p("ifname", "wan_ifname")
  85                 print " option proto    dhcp"
  86         }' > /etc/config/network
  87 }