generic: ar8216: use pr_* macros for kernel messages

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35554 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index c463108..a34a749 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -794,18 +794,18 @@ ar8316_hw_init(struct ar8216_priv *priv)
                if (priv->port4_phy) {
                        /* value taken from Ubiquiti RouterStation Pro */
                        newval = 0x81461bea;
-                       printk(KERN_INFO "ar8316: Using port 4 as PHY\n");
+                       pr_info("ar8316: Using port 4 as PHY\n");
                } else {
                        newval = 0x01261be2;
-                       printk(KERN_INFO "ar8316: Using port 4 as switch port\n");
+                       pr_info("ar8316: Using port 4 as switch port\n");
                }
        } else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
                /* value taken from AVM Fritz!Box 7390 sources */
                newval = 0x010e5b71;
        } else {
                /* no known value for phy interface */
-               printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
-                       priv->phy->interface);
+               pr_err("ar8316: unsupported mii mode: %d.\n",
+                      priv->phy->interface);
                return -EINVAL;
        }
 
@@ -1689,9 +1689,8 @@ ar8216_id_chip(struct ar8216_priv *priv)
                priv->chip = &ar8327_chip;
                break;
        default:
-               printk(KERN_DEBUG
-                       "ar8216: Unknown Atheros device [ver=%d, rev=%d]\n",
-                       priv->chip_ver, priv->chip_rev);
+               pr_err("ar8216: Unknown Atheros device [ver=%d, rev=%d]\n",
+                      priv->chip_ver, priv->chip_rev);
 
                return -ENODEV;
        }
@@ -1900,7 +1899,7 @@ ar8216_config_init(struct phy_device *pdev)
        if (ret)
                goto err_free_priv;
 
-       printk(KERN_INFO "%s: %s switch driver attached.\n",
+       pr_info("%s: %s switch driver attached.\n",
                pdev->attached_dev->name, swdev->name);
 
        priv->init = true;