brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35597 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
index 229beb9..2b1a66d 100755 (executable)
--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
@@ -91,6 +91,14 @@ start() {
                        if (mac_check != "") mac_check = mac_check ":"
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
+               if (system("[ -d /proc/switch/eth0 ] ") == 0) {
+                       getline < "/proc/switch/eth0/cpuport"
+                       cpuport=$0
+                       if (cpuport == "8") {
+                               c["vlan0ports"]="1 2 3 4 8"
+                               c["vlan1ports"]="0 8"
+                       }
+               }
        }
 
        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
@@ -157,22 +165,6 @@ start() {
                        c["lan_ifname"] = "eth0"
                        c["wan_ifname"] = "eth1"
                }
-               # generic broadcom 4705/4785 processor with 5397 switch?
-               #  EXCEPT Linksys WRT300N V1.1
-               if ((nvram["boardtype"] == "0x478") && \
-                   (model != "Linksys WRT300N V1.1")) {
-                       c["vlan0ports"] = "1 2 3 4 8*"
-                       c["vlan1ports"] = "0 8"
-               }
-
-               # generic broadcom 4716 processor with 53115 switch
-               if ((tolower(nvram["boardtype"]) == "0x04cf") || \
-                       (tolower(nvram["boardtype"]) == "0xf5b2") || \
-                       (tolower(nvram["boardtype"]) == "0xf52a") || \
-                       (tolower(nvram["boardtype"]) == "0xf52e")) {
-                       c["vlan0ports"] = "1 2 3 4 8*"
-                       c["vlan1ports"] = "0 8"
-               }
 
                # WAP54G
                if ((nvram["boardnum"] == "2") || \