[ar7] vlynq: rework probing and clocking setup
authorFlorian Fainelli <florian@openwrt.org>
Sat, 13 Oct 2012 17:47:36 +0000 (17:47 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Sat, 13 Oct 2012 17:47:36 +0000 (17:47 +0000)
Handle the different vlynq device versions, and make the vlynq code more
in line with the original vlynq implementation.

Patch from Daniel Gimpelevich.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33755 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar7/patches-3.3/160-vlynq_try_remote_first.patch

index 437bc89..1d1310d 100644 (file)
 --- a/drivers/vlynq/vlynq.c
 +++ b/drivers/vlynq/vlynq.c
-@@ -514,9 +514,14 @@ static int __vlynq_enable_device(struct
-                               !__vlynq_try_external(dev))
-                               return 0;
+@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
+       return 0;
+ }
++static volatile int vlynq_delay_value_new = 0;
++
++static void vlynq_delay_wait(u32 count)
++{
++      /* Code adopted from original vlynq driver */
++      int i = 0;
++      volatile int *ptr = &vlynq_delay_value_new;
++      *ptr = 0;
++
++      /* We are assuming that the each cycle takes about
++       * 23 assembly instructions. */
++      for(i = 0; i < (count + 23)/23; i++)
++              *ptr = *ptr + 1;
++}
++
+ static void vlynq_reset(struct vlynq_device *dev)
+ {
++      u32 rtm = readl(&dev->local->revision);
++
++      rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
++                      0 : 0x600000;
++
+       writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
+                       &dev->local->control);
+       /* Wait for the devices to finish resetting */
+-      msleep(5);
++      vlynq_delay_wait(0xffffff);
+       /* Remove reset bit */
+-      writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
++      writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
+                       &dev->local->control);
+       /* Give some time for the devices to settle */
+-      msleep(5);
++      vlynq_delay_wait(0xffffff);
+ }
+ static void vlynq_irq_unmask(struct irq_data *d)
+@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
+ }
+ EXPORT_SYMBOL(vlynq_unregister_driver);
++enum vlynq_clk_src {
++      vlynq_clk_external,
++      vlynq_clk_local,
++      vlynq_clk_remote,
++      vlynq_clk_invalid,
++};
++
++static int __vlynq_set_clocks(struct vlynq_device *dev,
++                              enum vlynq_clk_src clk_dir,
++                              int lclk_div, int rclk_div)
++{
++      u32 reg;
++
++      if (clk_dir == vlynq_clk_invalid) {
++              printk(KERN_ERR "%s: attempt to set invalid clocking\n",
++                              dev_name(&dev->dev));
++              return -EINVAL;
++      }
++
++      reg = readl(&dev->local->control);
++      if (readl(&dev->local->revision) < 0x00010205) {
++              if (clk_dir & vlynq_clk_local)
++                      reg |= VLYNQ_CTRL_CLOCK_INT;
++              else
++                      reg &= ~VLYNQ_CTRL_CLOCK_INT;
++      }
++      reg &= ~VLYNQ_CTRL_CLOCK_MASK;
++      reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
++      writel(reg, &dev->local->control);
++
++      if (!vlynq_linked(dev))
++              return -ENODEV;
++
++      printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
++                      dev_name(&dev->dev), readl(&dev->local->revision));
++      printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
++                      dev_name(&dev->dev), readl(&dev->remote->revision));
++
++      reg = readl(&dev->remote->control);
++      if (readl(&dev->remote->revision) < 0x00010205) {
++              if (clk_dir & vlynq_clk_remote)
++                      reg |= VLYNQ_CTRL_CLOCK_INT;
++              else
++                      reg &= ~VLYNQ_CTRL_CLOCK_INT;
++      }
++      reg &= ~VLYNQ_CTRL_CLOCK_MASK;
++      reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
++      writel(reg, &dev->remote->control);
++
++      if (!vlynq_linked(dev))
++              return -ENODEV;
++
++      return 0;
++}
++
+ /*
+  * A VLYNQ remote device can clock the VLYNQ bus master
+  * using a dedicated clock line. In that case, both the
+@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
+       int i;
+       vlynq_reset(dev);
+-      for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
+-                      i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
+-              dev->dev_id ? i++ : i--) {
++      for (i = 0; i <= 7; i++) {
+               if (!vlynq_linked(dev))
+                       break;
+-              writel((readl(&dev->remote->control) &
+-                              ~VLYNQ_CTRL_CLOCK_MASK) |
+-                              VLYNQ_CTRL_CLOCK_INT |
+-                              VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+-                              &dev->remote->control);
+-              writel((readl(&dev->local->control)
+-                              & ~(VLYNQ_CTRL_CLOCK_INT |
+-                              VLYNQ_CTRL_CLOCK_MASK)) |
+-                              VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+-                              &dev->local->control);
+-
+-              if (vlynq_linked(dev)) {
+-                      printk(KERN_DEBUG
+-                              "%s: using remote clock divisor %d\n",
+-                              dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
+-                      dev->divisor = i;
++              if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
++                      printk(KERN_INFO
++                                      "%s: using remote clock divisor %d\n",
++                                      dev_name(&dev->dev), i + 1);
++                      dev->divisor = i + vlynq_rdiv1;
+                       return 0;
                } else {
+                       vlynq_reset(dev);
+@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
+  */
+ static int __vlynq_try_local(struct vlynq_device *dev)
+ {
+-      int i;
++      int i, dir = !dev->dev_id;
+       vlynq_reset(dev);
+-      for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+-                      i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+-              dev->dev_id ? i++ : i--) {
+-
+-              writel((readl(&dev->local->control) &
+-                              ~VLYNQ_CTRL_CLOCK_MASK) |
+-                              VLYNQ_CTRL_CLOCK_INT |
+-                              VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
+-                              &dev->local->control);
+-
+-              if (vlynq_linked(dev)) {
+-                      printk(KERN_DEBUG
+-                              "%s: using local clock divisor %d\n",
+-                              dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
+-                      dev->divisor = i;
++      for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
++
++              if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
++                      printk(KERN_INFO
++                                      "%s: using local clock divisor %d\n",
++                                      dev_name(&dev->dev), i + 1);
++                      dev->divisor = i + vlynq_ldiv1;
+                       return 0;
+               } else {
+                       vlynq_reset(dev);
+@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
+       if (!vlynq_linked(dev))
+               return -ENODEV;
+-      writel((readl(&dev->remote->control) &
+-                      ~VLYNQ_CTRL_CLOCK_INT),
+-                      &dev->remote->control);
+-
+-      writel((readl(&dev->local->control) &
+-                      ~VLYNQ_CTRL_CLOCK_INT),
+-                      &dev->local->control);
+-
+-      if (vlynq_linked(dev)) {
+-              printk(KERN_DEBUG "%s: using external clock\n",
+-                      dev_name(&dev->dev));
+-                      dev->divisor = vlynq_div_external;
++      if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
++              printk(KERN_INFO "%s: using external clock\n",
++                              dev_name(&dev->dev));
++                              dev->divisor = vlynq_div_external;
+               return 0;
+       }
+@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
+               return result;
+       switch (dev->divisor) {
+-      case vlynq_div_external:
+       case vlynq_div_auto:
+               /* When the device is brought from reset it should have clock
+                * generation negotiated by hardware.
+                * Check which device is generating clocks and perform setup
+                * accordingly */
+-              if (vlynq_linked(dev) && readl(&dev->remote->control) &
+-                 VLYNQ_CTRL_CLOCK_INT) {
+-                      if (!__vlynq_try_remote(dev) ||
+-                              !__vlynq_try_local(dev)  ||
+-                              !__vlynq_try_external(dev))
+-                              return 0;
+-              } else {
 -                      if (!__vlynq_try_external(dev) ||
 -                              !__vlynq_try_local(dev)    ||
 -                              !__vlynq_try_remote(dev))
-+            /* XXX: I don't really know what difference it makes, if the order
-+             * of the following calls is changed, but at least in this order
-+             * my fritzbox doesn't hang at startup as in
-+             * https://dev.openwrt.org/ticket/7324
-+             */
-+                      if (!__vlynq_try_remote(dev) ||
-+                              !__vlynq_try_local(dev)  ||
-+                              !__vlynq_try_external(dev))
-                               return 0;
+-                              return 0;
+-              }
++              if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
++                      return 0;
++      case vlynq_div_external:
++              if (!__vlynq_try_external(dev))
++                      return 0;
+               break;
+       case vlynq_ldiv1:
+       case vlynq_ldiv2:
+@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
+       case vlynq_ldiv6:
+       case vlynq_ldiv7:
+       case vlynq_ldiv8:
+-              writel(VLYNQ_CTRL_CLOCK_INT |
+-                      VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+-                      vlynq_ldiv1), &dev->local->control);
+-              writel(0, &dev->remote->control);
+-              if (vlynq_linked(dev)) {
+-                      printk(KERN_DEBUG
+-                              "%s: using local clock divisor %d\n",
+-                              dev_name(&dev->dev),
+-                              dev->divisor - vlynq_ldiv1 + 1);
++              if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
++                              vlynq_ldiv1, 0)) {
++                      printk(KERN_INFO
++                                      "%s: using local clock divisor %d\n",
++                                      dev_name(&dev->dev),
++                                      dev->divisor - vlynq_ldiv1 + 1);
+                       return 0;
+               }
+               break;
+@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
+       case vlynq_rdiv6:
+       case vlynq_rdiv7:
+       case vlynq_rdiv8:
+-              writel(0, &dev->local->control);
+-              writel(VLYNQ_CTRL_CLOCK_INT |
+-                      VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+-                      vlynq_rdiv1), &dev->remote->control);
+-              if (vlynq_linked(dev)) {
+-                      printk(KERN_DEBUG
+-                              "%s: using remote clock divisor %d\n",
+-                              dev_name(&dev->dev),
+-                              dev->divisor - vlynq_rdiv1 + 1);
++              if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
++                              dev->divisor - vlynq_rdiv1)) {
++                      printk(KERN_INFO
++                                      "%s: using remote clock divisor %d\n",
++                                      dev_name(&dev->dev),
++                                      dev->divisor - vlynq_rdiv1 + 1);
+                       return 0;
                }
                break;
+       }
+-
++      vlynq_reset(dev);
+       ops->off(dev);
+       return -ENODEV;
+ }
+@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
+       platform_set_drvdata(pdev, dev);
+       printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
+-             dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
+-             (void *)dev->mem_start);
++                      dev_name(&dev->dev), (void *)dev->regs_start,
++                      dev->irq, (void *)dev->mem_start);
+       dev->dev_id = 0;
+       dev->divisor = vlynq_div_auto;
+-      result = __vlynq_enable_device(dev);
+-      if (result == 0) {
++      if (!__vlynq_enable_device(dev)) {
+               dev->dev_id = readl(&dev->remote->chip);
++              vlynq_reset(dev);
+               ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
+       }
+       if (dev->dev_id)