target/linux/ramips/dts/WR6202.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WR6202", "ralink,rt3052-soc";
   7         model = "AWB WR6202";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         pinctrl {
  14                 state_default: pinctrl0 {
  15                         gpio {
  16                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  17                                 ralink,function = "gpio";
  18                         };
  19                 };
  20         };
  21
  22         gpio-leds {
  23                 compatible = "gpio-leds";
  24                 wps {
  25                         label = "wr6202:blue:wps";
  26                         gpios = <&gpio0 14 1>;
  27                 };
  28                 3g {
  29                         label = "wr6202:blue:3g";
  30                         gpios = <&gpio0 13 1>;
  31                 };
  32         };
  33
  34         gpio-keys-polled {
  35                 compatible = "gpio-keys-polled";
  36                 #address-cells = <1>;
  37                 #size-cells = <0>;
  38                 poll-interval = <20>;
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio0 10 1>;
  42                         linux,code = <0x198>;
  43                 };
  44                 wps {
  45                         label = "wps";
  46                         gpios = <&gpio0 0 1>;
  47                         linux,code = <0x211>;
  48                 };
  49         };
  50
  51         cfi@1f000000 {
  52                 compatible = "cfi-flash";
  53                 reg = <0x1f000000 0x800000>;
  54
  55                 bank-width = <2>;
  56                 device-width = <2>;
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59
  60                 partition@0 {
  61                         label = "u-boot";
  62                         reg = <0x0 0x30000>;
  63                         read-only;
  64                 };
  65
  66                 partition@30000 {
  67                         label = "u-boot-env";
  68                         reg = <0x30000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 factory: partition@40000 {
  73                         label = "factory";
  74                         reg = <0x40000 0x10000>;
  75                         read-only;
  76                 };
  77
  78                 partition@50000 {
  79                         label = "firmware";
  80                         reg = <0x50000 0x7b0000>;
  81                 };
  82         };
  83
  84         ethernet@10100000 {
  85                 mtd-mac-address = <&factory 0x28>;
  86         };
  87
  88         esw@10110000 {
  89                 ralink,portmap = <0x3e>;
  90         };
  91
  92         wmac@10180000 {
  93                 ralink,mtd-eeprom = <&factory 0>;
  94         };
  95
  96         otg@101c0000 {
  97                 status = "okay";
  98         };
  99
 100         gpio_export {
 101                 compatible = "gpio-export";
 102                 #size-cells = <0>;
 103
 104                 usb {
 105                         gpio-export,name = "usb";
 106                         gpio-export,output = <0>;
 107                         gpios = <&gpio0 11 0>;
 108                 };
 109         };
 110 };