target/linux/ramips/dts/W150M.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "3G300M", "ralink,rt3050-soc";
   7         model = "Tenda 3G300M";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x3c8000>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53                 3grouter {
  54                         label = "tenda:blue:3grouter";
  55                         gpios = <&gpio0 11 1>;
  56                 };
  57                 ap {
  58                         label = "tenda:blue:ap";
  59                         gpios = <&gpio0 12 1>;
  60                 };
  61                 wisprouter {
  62                         label = "tenda:blue:wisprouter";
  63                         gpios = <&gpio0 9 1>;
  64                 };
  65                 wirelessrouter {
  66                         label = "tenda:blue:wirelessrouter";
  67                         gpios = <&gpio0 13 1>;
  68                 };
  69                 3g {
  70                         label = "tenda:blue:3g";
  71                         gpios = <&gpio0 7 1>;
  72                 };
  73                 wpsreset {
  74                         label = "tenda:blue:wpsreset";
  75                         gpios = <&gpio0 14 1>;
  76                 };
  77         };
  78
  79         gpio-keys-polled {
  80                 compatible = "gpio-keys-polled";
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83                 poll-interval = <20>;
  84                 reset {
  85                         label = "reset";
  86                         gpios = <&gpio0 0 1>;
  87                         linux,code = <0x198>;
  88                 };
  89                 mode {
  90                         label = "mode";
  91                         gpios = <&gpio0 10 1>;
  92                         linux,code = <0x100>;
  93                 };
  94         };
  95
  96         ethernet@10100000 {
  97                 mtd-mac-address = <&factory 0x4>;
  98         };
  99
 100         esw@10110000 {
 101                 ralink,portmap = <0x2f>;
 102         };
 103
 104         wmac@10180000 {
 105                 ralink,mtd-eeprom = <&factory 0>;
 106         };
 107 };