target/linux/kirkwood/files-3.3/arch/arm/mach-kirkwood/nas6210-setup.c

   1 /*
   2  * arch/arm/mach-kirkwood/nas6210-setup.c
   3  *
   4  * Raidsonic ICYBOX NAS6210 Board Setup
   5  *
   6  * This file is licensed under the terms of the GNU General Public
   7  * License version 2.  This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/ata_platform.h>
  15 #include <linux/mtd/partitions.h>
  16 #include <linux/mv643xx_eth.h>
  17 #include <linux/gpio.h>
  18 #include <linux/gpio_keys.h>
  19 #include <linux/input.h>
  20 #include <linux/leds.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <mach/kirkwood.h>
  24 #include "common.h"
  25 #include "mpp.h"
  26
  27 #define NAS6210_GPIO_POWER_OFF  24
  28
  29 static struct mtd_partition nas6210_nand_parts[] = {
  30         {
  31                 .name = "uboot",
  32                 .offset = 0,
  33                 .size = SZ_512K
  34         }, {
  35                 .name = "uboot_env",
  36                 .offset = MTDPART_OFS_NXTBLK,
  37                 .size = SZ_128K
  38         }, {
  39                 .name = "kernel",
  40                 .offset = MTDPART_OFS_NXTBLK,
  41                 .size = 3 * SZ_1M
  42         }, {
  43                 .name = "rootfs",
  44                 .offset = MTDPART_OFS_NXTBLK,
  45                 .size = MTDPART_SIZ_FULL
  46         },
  47 };
  48
  49 static struct mv643xx_eth_platform_data nas6210_ge00_data = {
  50         .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
  51 };
  52
  53 static struct mv_sata_platform_data nas6210_sata_data = {
  54         .n_ports        = 2,
  55 };
  56
  57 static struct gpio_led nas6210_led_pins[] = {
  58         {
  59                 .name                   = "status:green:power",
  60                 .default_trigger        = "default-on",
  61                 .gpio                   = 25,
  62                 .active_low             = 0,
  63         },
  64         {
  65                 .name                   = "status:red:power",
  66                 .default_trigger        = "none",
  67                 .gpio                   = 22,
  68                 .active_low             = 0,
  69         },
  70         {
  71                 .name                   = "status:red:usb_copy",
  72                 .default_trigger        = "none",
  73                 .gpio                   = 27,
  74                 .active_low             = 0,
  75         },
  76 };
  77
  78 static struct gpio_led_platform_data nas6210_led_data = {
  79         .leds           = nas6210_led_pins,
  80         .num_leds       = ARRAY_SIZE(nas6210_led_pins),
  81 };
  82
  83 static struct platform_device nas6210_leds = {
  84         .name   = "leds-gpio",
  85         .id     = -1,
  86         .dev    = {
  87                 .platform_data  = &nas6210_led_data,
  88         }
  89 };
  90
  91 static struct gpio_keys_button nas6210_buttons[] = {
  92         {
  93                 .code           = KEY_COPY,
  94                 .gpio           = 29,
  95                 .desc           = "USB Copy",
  96                 .active_low     = 1,
  97         },
  98         {
  99                 .code           = KEY_RESTART,
 100                 .gpio           = 28,
 101                 .desc           = "Reset",
 102                 .active_low     = 1,
 103         },
 104 };
 105
 106 static struct gpio_keys_platform_data nas6210_button_data = {
 107         .buttons        = nas6210_buttons,
 108         .nbuttons       = ARRAY_SIZE(nas6210_buttons),
 109 };
 110
 111 static struct platform_device nas6210_button_device = {
 112         .name           = "gpio-keys",
 113         .id             = -1,
 114         .num_resources  = 0,
 115         .dev            = {
 116                 .platform_data  = &nas6210_button_data,
 117         }
 118 };
 119
 120 static unsigned int nas6210_mpp_config[] __initdata = {
 121         MPP0_NF_IO2,
 122         MPP1_NF_IO3,
 123         MPP2_NF_IO4,
 124         MPP3_NF_IO5,
 125         MPP4_NF_IO6,
 126         MPP5_NF_IO7,
 127         MPP18_NF_IO0,
 128         MPP19_NF_IO1,
 129         MPP22_GPIO,     /* Power LED red */
 130         MPP24_GPIO,     /* Power off device */
 131         MPP25_GPIO,     /* Power LED green */
 132         MPP27_GPIO,     /* USB transfer LED */
 133         MPP28_GPIO,     /* Reset button */
 134         MPP29_GPIO,     /* USB Copy button */
 135         0
 136 };
 137
 138 static void nas6210_power_off(void)
 139 {
 140         gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
 141 }
 142
 143 static void __init nas6210_init(void)
 144 {
 145         /*
 146          * Basic setup. Needs to be called early.
 147          */
 148         kirkwood_init();
 149         kirkwood_mpp_conf(nas6210_mpp_config);
 150
 151         kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
 152         kirkwood_ehci_init();
 153         kirkwood_ge00_init(&nas6210_ge00_data);
 154         kirkwood_sata_init(&nas6210_sata_data);
 155         kirkwood_uart0_init();
 156         platform_device_register(&nas6210_leds);
 157         platform_device_register(&nas6210_button_device);
 158         if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
 159             gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
 160                 pm_power_off = nas6210_power_off;
 161         else
 162                 pr_err("nas6210: failed to configure power-off GPIO\n");
 163 }
 164
 165 static int __init nas6210_pci_init(void)
 166 {
 167         if (machine_is_nas6210()) {
 168                 u32 dev, rev;
 169
 170                 kirkwood_pcie_id(&dev, &rev);
 171                 if (dev == MV88F6282_DEV_ID)
 172                         kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
 173                 else
 174                         kirkwood_pcie_init(KW_PCIE0);
 175         }
 176
 177         return 0;
 178 }
 179 subsys_initcall(nas6210_pci_init);
 180
 181 MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
 182         /* Maintainer: <gmbnomis at gmail dot com> */
 183         .atag_offset    = 0x100,
 184         .init_machine   = nas6210_init,
 185         .map_io         = kirkwood_map_io,
 186         .init_early     = kirkwood_init_early,
 187         .init_irq       = kirkwood_init_irq,
 188         .timer          = &kirkwood_timer,
 189         .restart        = kirkwood_restart,
 190 MACHINE_END