target/linux/brcm63xx/patches-3.14/528-board_nb6.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -18,6 +18,7 @@
   4  #if 0 /* FIXME: 3.14 removed non-DT support */
   5  #include <linux/spi/74x164.h>
   6  #endif
   7 +#include <linux/rtl8367.h>
   8  #include <asm/addrspace.h>
   9  #include <bcm63xx_board.h>
  10  #include <bcm63xx_cpu.h>
  11 @@ -46,6 +47,8 @@
  12  #define NB4_SPI_GPIO_MOSI      7
  13  #define NB4_SPI_GPIO_CLK       6
  14  #define NB4_74HC64_GPIO(X)     (NB4_74X164_GPIO_BASE + (X))
  15 +#define NB6_GPIO_RTL8367_SDA   18
  16 +#define NB6_GPIO_RTL8367_SCK   20
  17
  18  #define CT6373_PID_OFFSET              0xff80
  19  #define CT6373_74X164_GPIO_BASE        64
  20 @@ -2717,6 +2720,105 @@ static struct board_info __initdata boar
  21  };
  22  #endif /* CONFIG_BCM63XX_CPU_6358 */
  23
  24 +#ifdef CONFIG_BCM63XX_CPU_6362
  25 +static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
  26 +       .mode = RTL8367_EXTIF_MODE_RGMII,
  27 +       .txdelay = 1,
  28 +       .rxdelay = 5,
  29 +       .ability = {
  30 +               .force_mode = 1,
  31 +               .txpause = 1,
  32 +               .rxpause = 1,
  33 +               .link = 1,
  34 +               .duplex = 1,
  35 +               .speed = RTL8367_PORT_SPEED_1000,
  36 +       },
  37 +};
  38 +
  39 +static struct rtl8367_platform_data nb6_rtl8367_data = {
  40 +       .gpio_sda       = NB6_GPIO_RTL8367_SDA,
  41 +       .gpio_sck       = NB6_GPIO_RTL8367_SCK,
  42 +       .extif0_cfg     = &nb6_rtl8367_extif0_cfg,
  43 +};
  44 +
  45 +static struct platform_device nb6_rtl8367_device = {
  46 +       .name           = RTL8367_DRIVER_NAME,
  47 +       .id             = -1,
  48 +       .dev = {
  49 +               .platform_data  = &nb6_rtl8367_data,
  50 +       }
  51 +};
  52 +
  53 +static struct platform_device * __initdata nb6_devices[] = {
  54 +       &nb6_rtl8367_device,
  55 +};
  56 +
  57 +static struct board_info __initdata board_nb6 = {
  58 +       .name                           = "NB6",
  59 +       .of_board_id                    = "sfr,nb6-ser-r0",
  60 +       .expected_cpu_id                = 0x6362,
  61 +
  62 +       .has_uart0                      = 1,
  63 +
  64 +       .has_ohci0                      = 1,
  65 +       .has_ehci0                      = 1,
  66 +       .num_usbh_ports                 = 2,
  67 +
  68 +       .has_enetsw                     = 1,
  69 +
  70 +       .enetsw = {
  71 +               .used_ports = {
  72 +                       [4] = {
  73 +                               .used   = 1,
  74 +                               .phy_id = 0xff,
  75 +                               .bypass_link = 1,
  76 +                               .force_speed = 1000,
  77 +                               .force_duplex_full = 1,
  78 +                               .name   = "RGMII",
  79 +                       },
  80 +               },
  81 +       },
  82 +
  83 +       .buttons = {
  84 +               {
  85 +                       .desc           = "reset",
  86 +                       .gpio           = 24,
  87 +                       .type           = EV_KEY,
  88 +                       .code           = KEY_RESTART,
  89 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  90 +                       .active_low     = 1,
  91 +               },
  92 +               {
  93 +                       .desc           = "wps",
  94 +                       .gpio           = 25,
  95 +                       .type           = EV_KEY,
  96 +                       .code           = KEY_WPS_BUTTON,
  97 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  98 +                       .active_low     = 1,
  99 +               },
 100 +               {
 101 +                       .desc           = "wlan",
 102 +                       .gpio           = 12,
 103 +                       .type           = EV_KEY,
 104 +                       .code           = KEY_WLAN,
 105 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 106 +                       .active_low     = 1,
 107 +               },
 108 +               {
 109 +                       .desc           = "service",
 110 +                       .gpio           = 10,
 111 +                       .type           = EV_KEY,
 112 +                       .code           = BTN_0,
 113 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 114 +                       .active_low     = 1,
 115 +               },
 116 +       },
 117 +
 118 +       .devs = nb6_devices,
 119 +       .num_devs = ARRAY_SIZE(nb6_devices),
 120 +};
 121 +#endif /* CONFIG_BCM63XX_CPU_6362 */
 122 +
 123  /*
 124   * known 6368 boards
 125   */
 126 @@ -2923,6 +3025,10 @@ static const struct board_info __initcon
 127         &board_DVAG3810BN,
 128  #endif
 129
 130 +#ifdef CONFIG_BCM63XX_CPU_6362
 131 +       &board_nb6,
 132 +#endif
 133 +
 134  #ifdef CONFIG_BCM63XX_CPU_6368
 135         &board_96368mvwg,
 136         &board_96368mvngr,