brcm63xx: enable fallback sprom for Speedport W500 V
[15.05/openwrt.git] / target / linux / brcm63xx / patches-3.14 / 527-board_dva-g3810bn-tl-1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -2315,6 +2315,74 @@ static struct board_info __initdata boar
4                 },
5         }
6  };
7 +
8 +/* D-Link DVA-G3810BN/TL */
9 +static struct board_info __initdata board_DVAG3810BN = {
10 +       .name                   = "DVAG3810BN",
11 +       .of_board_id            = "d-link,dva-g3810bn/tl",
12 +       .expected_cpu_id        = 0x6358,
13 +
14 +       .has_uart0              = 1,
15 +       .has_enet0              = 1,
16 +       .has_enet1              = 1,
17 +       .has_pci                = 1,
18 +
19 +       .enet0 = {
20 +               .has_phy                = 0,
21 +               .use_internal_phy       = 1,
22 +               .force_speed_100        = 1,
23 +               .force_duplex_full      = 1,
24 +       },
25 +
26 +       .enet1 = {
27 +               .has_phy                = 1,
28 +               .phy_id                 = 0,
29 +               .force_speed_100        = 1,
30 +               .force_duplex_full      = 1,
31 +       },
32 +
33 +
34 +       .has_ohci0              = 1,
35 +       .has_pccard             = 1,
36 +       .has_ehci0              = 1,
37 +
38 +       .leds = {
39 +               {
40 +                       .name   = "DVAG3810BN::voip",
41 +                       .gpio   = 1,
42 +               },
43 +               {
44 +                       .name   = "DVAG3810BN::dsl",
45 +                       .gpio   = 22,
46 +                       .active_low  = 1,
47 +               },
48 +               {
49 +                       .name   = "DVAG3810BN::internet",
50 +                       .gpio   = 23,
51 +                       .active_low  = 1,
52 +               },
53 +               {
54 +                       .name   = "DVAG3810BN::power",
55 +                       .gpio   = 4,
56 +                       .default_trigger = "default-on",
57 +               },
58 +               {
59 +                       .name   = "DVAG3810BN::stop",
60 +                       .gpio   = 5,
61 +               },
62 +       },
63 +
64 +       .buttons = {
65 +               {
66 +                       .desc   = "reset",
67 +                       .gpio   = 34,
68 +                       .active_low = 1,
69 +                       .type   = EV_KEY,
70 +                       .code   = KEY_RESTART,
71 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
72 +               },
73 +       },
74 +};
75  #endif /* CONFIG_BCM63XX_CPU_6358 */
76  
77  /*
78 @@ -2517,6 +2585,7 @@ static const struct board_info __initcon
79         &board_ct6373_1,
80         &board_HW553,
81         &board_spw303v,
82 +       &board_DVAG3810BN,
83  #endif
84  
85  #ifdef CONFIG_BCM63XX_CPU_6368