BB : ramips : Backport for Kingston MLWG2

Backport r43990 to Barrier Breaker.

http://wiki.openwrt.org/toh/kingston/mlwg2

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
 target/linux/ramips/base-files/etc/diag.sh                 |   3 +++
 target/linux/ramips/base-files/etc/uci-defaults/01_leds    |   4 +++
 target/linux/ramips/base-files/etc/uci-defaults/02_network |   4 +++
 target/linux/ramips/base-files/lib/ramips.sh               |   3 +++
 target/linux/ramips/base-files/lib/upgrade/platform.sh     |   1 +
 target/linux/ramips/dts/MLWG2.dts                          | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 target/linux/ramips/image/Makefile                         |   2 ++
 7 files changed, 135 insertions(+)

git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44160 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 9ad7ccb..bd3779a 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -76,6 +76,9 @@ get_status_led() {
        mlw221)
                status_led="kingston:blue:status"
                ;;
+       mlwg2)
+               status_led="kingston:blue:system"
+               ;;
        mofi3500-3gn)
                status_led="mofi3500-3gn:green:status"
                ;;

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 2f36bed..f5b5b01 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -117,6 +117,10 @@ case $board in
                set_wifi_led "kingston:blue:wifi"
                ucidef_set_led_default "system" "system" "kingston:blue:system" "1"
                ;;
+       mlwg2)
+               set_wifi_led "kingston:blue:wifi"
+               ucidef_set_led_default "system" "system" "kingston:blue:system" "1"
+               ;;
        mofi3500-3gn)
                set_usb_led "mofi3500-3gn:green:usb"
                ;;

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 6840fb6..91bedcc 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -55,6 +55,10 @@ ramips_setup_interfaces()
                 ucidef_set_interface_lan "eth0.2"
                 ;;
 
+       mlwg2)
+                ucidef_set_interface_lan "eth0.1"
+                ;;
+
        wl-330n | \
        wmr300)
                ucidef_set_interface_lan "eth0.1"

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index d7b5540..fd03423 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -163,6 +163,9 @@ ramips_board_detect() {
        *"Kingston MLW221")
                name="mlw221"
                ;;
+       *"Kingston MLWG2")
+               name="mlwg2"
+               ;;
        *"Planex MZK-750DHP")
                name="mzk-750dhp"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 407c218..ba69a89 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -56,6 +56,7 @@ platform_check_image() {
        m3 | \
        m4 | \
        mlw221 | \
+       mlwg2 | \
        mofi3500-3gn | \
        mpr-a1 | \
        mpr-a2 | \

diff --git a/target/linux/ramips/dts/MLWG2.dts b/target/linux/ramips/dts/MLWG2.dts
new file mode 100644 (file)
index 0000000..a2b0033
--- /dev/null
+++ b/target/linux/ramips/dts/MLWG2.dts
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+       compatible = "mlwg2", "ralink,mt7620n-soc";
+       model = "Kingston MLWG2";
+
+       palmbus@10000000 {
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               gpio3: gpio@688 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l12805d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0xf60000>;
+                               };
+
+                               partition@fb0000 {
+                                       label = "user-config";
+                                       reg = <0xfb0000 0x50000>;
+                               };
+                       };
+               };
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       ethernet@10100000 {
+               mtd-mac-address = <&factory 0x4>;
+               ralink,port-map = "wllll";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       default {
+                               ralink,group = "i2c", "ephy", "wled";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               system {
+                       label = "kingston:blue:system";
+                       gpios = <&gpio2 3 1>;
+               };
+               wifi {
+                       label = "kingston:blue:wifi";
+                       gpios = <&gpio3 0 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 1>;
+                       linux,code = <0x198>;
+               };
+               system {
+                       label = "system";
+                       gpios = <&gpio0 2 1>;
+                       linux,code = <0x211>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 2de3328..86200ab 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -751,6 +751,7 @@ endif
 #
 
 Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
+Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
 Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
 Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
 Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
@@ -760,6 +761,7 @@ Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,Z
 ifeq ($(SUBTARGET),mt7620n)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/MLW221,$(1))
+       $(call Image/Build/Profile/MLWG2,$(1))
        $(call Image/Build/Profile/WMR300,$(1))
        $(call Image/Build/Profile/RT-N14U,$(1))
        $(call Image/Build/Profile/WR8305RT,$(1))