5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 dsl = &broadband_yellow;
12 internet = &internet_yellow;
15 wifi = &wireless_yellow;
20 reg = <0x0 0x4000000>;
26 compatible = "lantiq,fpi", "simple-bus";
27 ranges = <0x0 0x10000000 0xEEFFFFF>;
28 reg = <0x10000000 0xEF00000>;
33 compatible = "lantiq,localbus", "simple-bus";
36 gpio: pinmux@E100B10 {
37 compatible = "lantiq,pinctrl-xr9";
38 pinctrl-names = "default";
39 pinctrl-0 = <&state_default>;
41 interrupt-parent = <&icu0>;
42 interrupts = <166 135 66 40 41 42 38>;
46 reg = <0xE100B10 0xA0>;
48 state_default: pinmux {
50 lantiq,groups = "stp";
51 lantiq,function = "stp";
54 lantiq,groups = "spi";
55 lantiq,function = "spi";
58 lantiq,groups = "mdio";
59 lantiq,function = "mdio";
62 lantiq,pins = "io7", "io44";
67 lantiq,pins = "io4", "io5", "io6";
68 lantiq,open-drain = <0>;
74 lantiq,open-drain = <0>;
79 lantiq,groups = "gphy0 led1", "gphy1 led0";
80 lantiq,function = "gphy";
81 lantiq,open-drain = <0>;
91 compatible = "lantiq,xrx200-net";
92 reg = < 0xE108000 0x3000 /* switch */
93 0xE10B100 0x70 /* mdio */
94 0xE10B1D8 0x30 /* mii */
95 0xE10B308 0x30 /* pmac */
97 interrupt-parent = <&icu0>;
101 compatible = "lantiq,xrx200-pdi";
102 #address-cells = <1>;
105 mac-address = [ 00 11 22 33 44 55 ];
108 compatible = "lantiq,xrx200-pdi-port";
111 phy-handle = <&phy0>;
114 compatible = "lantiq,xrx200-pdi-port";
117 phy-handle = <&phy1>;
120 compatible = "lantiq,xrx200-pdi-port";
123 phy-handle = <&phy11>;
126 compatible = "lantiq,xrx200-pdi-port";
129 phy-handle = <&phy13>;
134 compatible = "lantiq,xrx200-pdi";
135 #address-cells = <1>;
138 mac-address = [ 00 11 22 33 44 56 ];
141 compatible = "lantiq,xrx200-pdi-port";
144 phy-handle = <&phy5>;
149 #address-cells = <1>;
151 compatible = "lantiq,xrx200-mdio";
152 phy0: ethernet-phy@0 {
154 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
155 lantiq,c45-reg-init = <1 0 0 0>;
157 phy1: ethernet-phy@1 {
159 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
160 lantiq,c45-reg-init = <1 0 0 0>;
162 phy5: ethernet-phy@5 {
164 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
165 lantiq,c45-reg-init = <1 0 0 0>;
167 phy11: ethernet-phy@11 {
169 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
170 lantiq,c45-reg-init = <1 0 0 0>;
172 phy13: ethernet-phy@13 {
174 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
175 lantiq,c45-reg-init = <1 0 0 0>;
181 compatible = "lantiq,gpio-stp-xway";
182 reg = <0xE100BB0 0x40>;
186 lantiq,shadow = <0xffff>;
187 lantiq,groups = <0x3>;
196 gpios = <&gpio 32 0>;
197 lantiq,portmask = <0x3>;
202 #address-cells = <3>;
204 #interrupt-cells = <1>;
205 compatible = "lantiq,pci-xway";
206 bus-range = <0x0 0x0>;
207 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
208 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
209 reg = <0x7000000 0x8000 /* config space */
210 0xE105400 0x400>; /* pci bridge */
211 lantiq,bus-clock = <33333333>;
212 /*lantiq,external-clock;*/
213 lantiq,delay-hi = <0>; /* 0ns delay */
214 lantiq,delay-lo = <0>; /* 0.0ns delay */
215 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
217 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
219 gpio-reset = <&gpio 21 0>;
220 req-mask = <0x1>; /* GNT1 */
229 compatible = "lantiq,phy-xrx200";
230 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
231 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
236 compatible = "ralink,eeprom";
237 ralink,eeprom = "RT2860.eeprom";
241 compatible = "gpio-keys-polled";
242 #address-cells = <1>;
244 poll-interval = <100>;
248 linux,code = <0x198>;
252 gpios = <&gpio 41 1>;
257 gpios = <&gpio 45 1>;
262 gpios = <&gpio 10 1>;
263 linux,code = <0x211>;
268 compatible = "gpio-leds";
278 wps_yellow { /* yellow */
279 label = "wps_yellow";
290 internet_yellow: internet_yellow { /* yellow */
291 label = "internet_yellow";
294 internet_red { /* red */
295 label = "internet_red";
298 broadband_red { /* red */
299 label = "broadband_red";
302 broadband_yellow: broadband_yellow { /* yellow */
303 label = "broadband_yellow";
310 wireless_red { /* red */
311 label = "wireless_red";
314 wireless_yellow: wireless_yellow { /* yellow */
315 label = "wireless_yellow";
318 power2: power2 { /* yellow */
322 power: power { /* red */
325 default-state = "on";