brcm63xx: Add DT support for HG553
[openwrt.git] / target / linux / brcm63xx / patches-3.14 / 530-board_A4001N1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -236,6 +236,134 @@ static struct board_info __initdata boar
4         },
5  };
6  
7 +static struct board_info __initdata board_A4001N1 = {
8 +       .name                                   = "963281T_TEF",
9 +       .of_board_id                    = "adb,a4001n1",
10 +       .expected_cpu_id                        = 0x6328,
11 +
12 +       .has_uart0                              = 1,
13 +       .has_pci                                = 1,
14 +       .use_fallback_sprom             = 1,
15 +       .has_ohci0                              = 1,
16 +       .has_ehci0                              = 1,
17 +       .num_usbh_ports                         = 1,
18 +       .has_enetsw                             = 1,
19 +
20 +       .enetsw = {
21 +               .used_ports = {
22 +                       [0] = {
23 +                               .used           = 1,
24 +                               .phy_id         = 1,
25 +                               .name           = "Port 1",
26 +                       },
27 +                       [1] = {
28 +                               .used           = 1,
29 +                               .phy_id         = 2,
30 +                               .name           = "Port 2",
31 +                       },
32 +                       [2] = {
33 +                               .used           = 1,
34 +                               .phy_id         = 3,
35 +                               .name           = "Port 3",
36 +                       },
37 +                       [3] = {
38 +                               .used           = 1,
39 +                               .phy_id         = 4,
40 +                               .name           = "Port 4",
41 +                       },
42 +               },
43 +       },
44 +
45 +       .leds = {
46 +               {
47 +                       .name                   = "A4001N1:green:power",
48 +                       .gpio                   = 4,
49 +                       .active_low             = 1,
50 +                       .default_trigger        = "default-on",
51 +               },
52 +               {
53 +                       .name                   = "A4001N1:red:power",
54 +                       .gpio                   = 8,
55 +                       .active_low             = 1,
56 +               },
57 +               {
58 +                       .name                   = "A4001N1:green:inet",
59 +                       .gpio                   = 11,
60 +                       .active_low             = 1,
61 +               },
62 +               {
63 +                       .name                   = "A4001N1:red:inet",
64 +                       .gpio                   = 2,
65 +                       .active_low             = 1,
66 +               },
67 +               {
68 +                       .name                   = "A4001N1:green:ppp",
69 +                       .gpio                   = 3,
70 +                       .active_low             = 1,
71 +               },
72 +               {
73 +                       .name                   = "A4001N1:red:ppp",
74 +                       .gpio                   = 5,
75 +                       .active_low             = 1,
76 +               },
77 +               {
78 +                       .name                   = "A4001N1:green:3g",
79 +                       .gpio                   = 6,
80 +                       .active_low             = 1,
81 +               },
82 +               {
83 +                       .name                   = "A4001N1:red:3g",
84 +                       .gpio                   = 7,
85 +                       .active_low             = 1,
86 +               },
87 +               {
88 +                       .name                   = "A4001N1:green:wlan",
89 +                       .gpio                   = 9,
90 +                       .active_low             = 1,
91 +               },
92 +               {
93 +                       .name                   = "A4001N1:red:wlan",
94 +                       .gpio                   = 10,
95 +                       .active_low             = 1,
96 +               },
97 +               {
98 +                       .name                   = "A4001N1:green:eth",
99 +                       .gpio                   = 31,
100 +                       .active_low             = 1,
101 +               },
102 +               {
103 +                       .name                   = "A4001N1:red:eth",
104 +                       .gpio                   = 20,
105 +                       .active_low             = 1,
106 +               },
107 +       },
108 +
109 +       .buttons = {
110 +               {
111 +                       .desc                   = "reset",
112 +                       .gpio                   = 23,
113 +                       .active_low             = 1,
114 +                       .type                   = EV_KEY,
115 +                       .code                   = KEY_RESTART,
116 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
117 +               },
118 +               {
119 +                       .desc                   = "wlan",
120 +                       .gpio                   = 24,
121 +                       .active_low             = 1,
122 +                       .type                   = EV_KEY,
123 +                       .code                   = KEY_WLAN,
124 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
125 +               },
126 +       },
127 +
128 +       .fallback_sprom = {
129 +               .type                           = SPROM_BCM43225,
130 +               .pci_bus                        = 1,
131 +               .pci_dev                        = 0,
132 +       },
133 +};
134 +
135  static struct board_info __initdata board_dsl_274xb_f1 = {
136         .name                           = "AW4339U",
137         .expected_cpu_id                = 0x6328,
138 @@ -2696,6 +2824,7 @@ static const struct board_info __initcon
139  #ifdef CONFIG_BCM63XX_CPU_6328
140         &board_96328avng,
141         &board_963281TAN,
142 +       &board_A4001N1,
143         &board_dsl_274xb_f1,
144  #endif
145  #ifdef CONFIG_BCM63XX_CPU_6338