Rework LuCI build system

[project/luci.git] / protocols / ppp / luasrc / model / cbi / admin_network / proto_pppoa.lua

diff --git a/protocols/ppp/luasrc/model/cbi/admin_network/proto_pppoa.lua b/protocols/ppp/luasrc/model/cbi/admin_network/proto_pppoa.lua
deleted file mode 100644 (file)
index c32e282..0000000
--- a/protocols/ppp/luasrc/model/cbi/admin_network/proto_pppoa.lua
+++ /dev/null
@@ -1,142 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2011 Jo-Philipp Wich <xm@subsignal.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-]]--
-
-local map, section, net = ...
-
-local encaps, atmdev, vci, vpi, username, password
-local ipv6, defaultroute, metric, peerdns, dns,
-      keepalive_failure, keepalive_interval, demand, mtu
-
-
-encaps = section:taboption("general", ListValue, "encaps", translate("PPPoA Encapsulation"))
-encaps:value("vc", "VC-Mux")
-encaps:value("llc", "LLC")
-
-
-atmdev = section:taboption("general", Value, "atmdev", translate("ATM device number"))
-atmdev.default  = "0"
-atmdev.datatype = "uinteger"
-
-
-vci = section:taboption("general", Value, "vci", translate("ATM Virtual Channel Identifier (VCI)"))
-vci.default  = "35"
-vci.datatype = "uinteger"
-
-
-vpi = section:taboption("general", Value, "vpi", translate("ATM Virtual Path Identifier (VPI)"))
-vpi.default  = "8"
-vpi.datatype = "uinteger"
-
-
-username = section:taboption("general", Value, "username", translate("PAP/CHAP username"))
-
-
-password = section:taboption("general", Value, "password", translate("PAP/CHAP password"))
-password.password = true
-
-
-if luci.model.network:has_ipv6() then
-
-       ipv6 = section:taboption("advanced", Flag, "ipv6",
-               translate("Enable IPv6 negotiation on the PPP link"))
-
-       ipv6.default = ipv6.disabled
-
-end
-
-
-defaultroute = section:taboption("advanced", Flag, "defaultroute",
-       translate("Use default gateway"),
-       translate("If unchecked, no default route is configured"))
-
-defaultroute.default = defaultroute.enabled
-
-
-metric = section:taboption("advanced", Value, "metric",
-       translate("Use gateway metric"))
-
-metric.placeholder = "0"
-metric.datatype    = "uinteger"
-metric:depends("defaultroute", defaultroute.enabled)
-
-
-peerdns = section:taboption("advanced", Flag, "peerdns",
-       translate("Use DNS servers advertised by peer"),
-       translate("If unchecked, the advertised DNS server addresses are ignored"))
-
-peerdns.default = peerdns.enabled
-
-
-dns = section:taboption("advanced", DynamicList, "dns",
-       translate("Use custom DNS servers"))
-
-dns:depends("peerdns", "")
-dns.datatype = "ipaddr"
-dns.cast     = "string"
-
-
-keepalive_failure = section:taboption("advanced", Value, "_keepalive_failure",
-       translate("LCP echo failure threshold"),
-       translate("Presume peer to be dead after given amount of LCP echo failures, use 0 to ignore failures"))
-
-function keepalive_failure.cfgvalue(self, section)
-       local v = m:get(section, "keepalive")
-       if v and #v > 0 then
-               return tonumber(v:match("^(%d+)[ ,]+%d+") or v)
-       end
-end
-
-function keepalive_failure.write() end
-function keepalive_failure.remove() end
-
-keepalive_failure.placeholder = "0"
-keepalive_failure.datatype    = "uinteger"
-
-
-keepalive_interval = section:taboption("advanced", Value, "_keepalive_interval",
-       translate("LCP echo interval"),
-       translate("Send LCP echo requests at the given interval in seconds, only effective in conjunction with failure threshold"))
-
-function keepalive_interval.cfgvalue(self, section)
-       local v = m:get(section, "keepalive")
-       if v and #v > 0 then
-               return tonumber(v:match("^%d+[ ,]+(%d+)"))
-       end
-end
-
-function keepalive_interval.write(self, section, value)
-       local f = tonumber(keepalive_failure:formvalue(section)) or 0
-       local i = tonumber(value) or 5
-       if i < 1 then i = 1 end
-       if f > 0 then
-               m:set(section, "keepalive", "%d %d" %{ f, i })
-       else
-               m:del(section, "keepalive")
-       end
-end
-
-keepalive_interval.remove      = keepalive_interval.write
-keepalive_interval.placeholder = "5"
-keepalive_interval.datatype    = "min(1)"
-
-
-demand = section:taboption("advanced", Value, "demand",
-       translate("Inactivity timeout"),
-       translate("Close inactive connection after the given amount of seconds, use 0 to persist connection"))
-
-demand.placeholder = "0"
-demand.datatype    = "uinteger"
-
-
-mtu = section:taboption("advanced", Value, "mtu", translate("Override MTU"))
-mtu.placeholder = "1500"
-mtu.datatype    = "max(9200)"