libs: introduce iwinfo - wireless information abstraction for proprietary broadcom...

[project/luci.git] / libs / iwinfo / src / include / madwifi.h

diff --git a/libs/iwinfo/src/include/madwifi.h b/libs/iwinfo/src/include/madwifi.h
new file mode 100644 (file)
index 0000000..c1eeca7
--- /dev/null
+++ b/libs/iwinfo/src/include/madwifi.h
@@ -0,0 +1,120 @@
+/*
+ * Header bits derived from MadWifi source:
+ *   Copyright (c) 2001 Atsushi Onoe
+ *   Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ *   All rights reserved.
+ *
+ * Distributed under the terms of the GPLv2 license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/* ieee80211.h */
+#define        IEEE80211_ADDR_LEN              6
+#define        IEEE80211_RATE_VAL              0x7f
+
+
+/* ieee80211_crypto.h */
+#define        IEEE80211_KEYBUF_SIZE           16
+#define        IEEE80211_MICBUF_SIZE           16
+#define IEEE80211_TID_SIZE                     17
+
+#define        IEEE80211_CIPHER_WEP            0
+#define        IEEE80211_CIPHER_TKIP           1
+#define        IEEE80211_CIPHER_AES_OCB        2
+#define        IEEE80211_CIPHER_AES_CCM        3
+#define        IEEE80211_CIPHER_CKIP           5
+#define        IEEE80211_CIPHER_NONE           6
+#define        IEEE80211_CIPHER_MAX            (IEEE80211_CIPHER_NONE + 1)
+
+
+/* ieee80211_ioctl.h */
+#define        IEEE80211_KEY_DEFAULT           0x80
+#define        IEEE80211_CHAN_MAX                      255
+#define        IEEE80211_CHAN_BYTES            32
+#define        IEEE80211_RATE_MAXSIZE          15
+
+#define        IEEE80211_IOCTL_GETKEY          (SIOCDEVPRIVATE+3)
+#define        IEEE80211_IOCTL_STA_STATS       (SIOCDEVPRIVATE+5)
+#define        IEEE80211_IOCTL_STA_INFO        (SIOCDEVPRIVATE+6)
+
+#define        IEEE80211_IOCTL_GETPARAM        (SIOCIWFIRSTPRIV+1)
+#define        IEEE80211_IOCTL_GETMODE         (SIOCIWFIRSTPRIV+3)
+#define        IEEE80211_IOCTL_GETCHANLIST     (SIOCIWFIRSTPRIV+7)
+#define        IEEE80211_IOCTL_GETCHANINFO     (SIOCIWFIRSTPRIV+13)
+
+enum {
+       IEEE80211_PARAM_AUTHMODE                = 3,    /* authentication mode */
+       IEEE80211_PARAM_MCASTCIPHER             = 5,    /* multicast/default cipher */
+       IEEE80211_PARAM_UCASTCIPHERS    = 7,    /* unicast cipher suites */
+       IEEE80211_PARAM_WPA                             = 10,   /* WPA mode (0,1,2) */
+};
+
+struct ieee80211_channel {
+       u_int16_t ic_freq;      /* setting in MHz */
+       u_int16_t ic_flags;     /* see below */
+       u_int8_t ic_ieee;       /* IEEE channel number */
+       int8_t ic_maxregpower;  /* maximum regulatory tx power in dBm */
+       int8_t ic_maxpower;     /* maximum tx power in dBm */
+       int8_t ic_minpower;     /* minimum tx power in dBm */
+       u_int8_t ic_scanflags;
+       u_int8_t ic_idletime; /* phy idle time in % */
+};
+
+struct ieee80211req_key {
+       u_int8_t ik_type;               /* key/cipher type */
+       u_int8_t ik_pad;
+       u_int16_t ik_keyix;     /* key index */
+       u_int8_t ik_keylen;             /* key length in bytes */
+       u_int8_t ik_flags;
+       u_int8_t ik_macaddr[IEEE80211_ADDR_LEN];
+       u_int64_t ik_keyrsc;            /* key receive sequence counter */
+       u_int64_t ik_keytsc;            /* key transmit sequence counter */
+       u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+
+struct ieee80211req_chanlist {
+       u_int8_t ic_channels[IEEE80211_CHAN_BYTES];
+};
+
+struct ieee80211req_chaninfo {
+       u_int ic_nchans;
+       struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX];
+};
+
+struct ieee80211req_sta_info {
+       u_int16_t isi_len;              /* length (mult of 4) */
+       u_int16_t isi_freq;             /* MHz */
+       u_int16_t isi_flags;            /* channel flags */
+       u_int16_t isi_state;            /* state flags */
+       u_int8_t isi_authmode;          /* authentication algorithm */
+       u_int8_t isi_rssi;
+       int8_t isi_noise;
+       u_int16_t isi_capinfo;          /* capabilities */
+       u_int8_t isi_athflags;          /* Atheros capabilities */
+       u_int8_t isi_erp;               /* ERP element */
+       u_int8_t isi_macaddr[IEEE80211_ADDR_LEN];
+       u_int8_t isi_nrates;            /* negotiated rates */
+       u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE];
+       u_int8_t isi_txrate;            /* index to isi_rates[] */
+       u_int16_t isi_ie_len;           /* IE length */
+       u_int16_t isi_associd;          /* assoc response */
+       u_int16_t isi_txpower;          /* current tx power */
+       u_int16_t isi_vlan;             /* vlan tag */
+       u_int16_t isi_txseqs[17];       /* seq to be transmitted */
+       u_int16_t isi_rxseqs[17];       /* seq previous for qos frames*/
+       u_int16_t isi_inact;            /* inactivity timer */
+       u_int8_t isi_uapsd;             /* UAPSD queues */
+       u_int8_t isi_opmode;            /* sta operating mode */
+};
+