ralink: add support for netis WF-2881
authorblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Tue, 24 Nov 2015 18:29:26 +0000 (18:29 +0000)
committerblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Tue, 24 Nov 2015 18:29:26 +0000 (18:29 +0000)
commit5baf40dbbe968a8367897f1efbca56aa77f6514e
tree599c91c85fb465a3718129fc7866ba73263f5cff
parent477a2e6199730af0bb95e1dcb679f181b8726106
ralink: add support for netis WF-2881

netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47619 3c298f89-4303-0410-b956-a3cf2f4a3e73
target/linux/ramips/Makefile
target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/base-files/lib/upgrade/platform.sh
target/linux/ramips/dts/WF-2881.dts [new file with mode: 0644]
target/linux/ramips/image/Makefile
target/linux/ramips/mt7621/config-3.18
target/linux/ramips/mt7621/profiles/netis.mk [new file with mode: 0644]