Add NAND flash/YAFFS2 patches for RB532 by David Goodenough

[openwrt.git] / target / linux / rb532-2.6 / patches / 120-cf.patch

diff --git a/target/linux/rb532-2.6/patches/120-cf.patch b/target/linux/rb532-2.6/patches/120-cf.patch
index 657d815..f12b0a9 100644 (file)
--- a/target/linux/rb532-2.6/patches/120-cf.patch
+++ b/target/linux/rb532-2.6/patches/120-cf.patch
@@ -1,7 +1,7 @@
 diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
---- linux.old/drivers/block/Kconfig    2006-06-08 20:20:52.000000000 +0200
-+++ linux.dev/drivers/block/Kconfig    2006-06-08 22:14:58.000000000 +0200
-@@ -453,4 +453,12 @@
+--- linux.old/drivers/block/Kconfig    2006-10-26 02:43:39.000000000 +0200
++++ linux.dev/drivers/block/Kconfig    2006-10-26 00:11:14.000000000 +0200
+@@ -456,4 +456,12 @@
        This driver provides Support for ATA over Ethernet block
        devices like the Coraid EtherDrive (R) Storage Blade.
  
@@ -14,9 +14,18 @@ diff -urN linux.old/drivers/block/Kconfig linux.dev/drivers/block/Kconfig
 +        device driver for it.
 +
  endmenu
+diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile
+--- linux.old/drivers/block/Makefile   2006-06-18 03:49:35.000000000 +0200
++++ linux.dev/drivers/block/Makefile   2006-10-26 02:44:10.000000000 +0200
+@@ -29,4 +29,5 @@
+ obj-$(CONFIG_VIODASD)         += viodasd.o
+ obj-$(CONFIG_BLK_DEV_SX8)     += sx8.o
+ obj-$(CONFIG_BLK_DEV_UB)      += ub.o
++obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/
+ 
 diff -urN linux.old/drivers/block/rb500/ata.c linux.dev/drivers/block/rb500/ata.c
 --- linux.old/drivers/block/rb500/ata.c        1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/ata.c        2006-06-09 01:58:40.000000000 +0200
++++ linux.dev/drivers/block/rb500/ata.c        2006-10-26 00:11:14.000000000 +0200
 @@ -0,0 +1,474 @@
 +#include <linux/kernel.h>     /* printk() */
 +#include <linux/module.h>     /* module to be loadable */
@@ -494,7 +503,7 @@ diff -urN linux.old/drivers/block/rb500/ata.c linux.dev/drivers/block/rb500/ata.
 +/*eof*/
 diff -urN linux.old/drivers/block/rb500/ata.h linux.dev/drivers/block/rb500/ata.h
 --- linux.old/drivers/block/rb500/ata.h        1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/ata.h        2006-06-09 00:15:23.000000000 +0200
++++ linux.dev/drivers/block/rb500/ata.h        2006-10-26 00:11:14.000000000 +0200
 @@ -0,0 +1,132 @@
 +#ifndef __CFMIPS_ATA_H__
 +#define __CFMIPS_ATA_H__
@@ -630,7 +639,7 @@ diff -urN linux.old/drivers/block/rb500/ata.h linux.dev/drivers/block/rb500/ata.
 +#endif
 diff -urN linux.old/drivers/block/rb500/bdev.c linux.dev/drivers/block/rb500/bdev.c
 --- linux.old/drivers/block/rb500/bdev.c       1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/bdev.c       2006-06-15 16:29:04.000000000 +0200
++++ linux.dev/drivers/block/rb500/bdev.c       2006-10-26 00:11:14.000000000 +0200
 @@ -0,0 +1,340 @@
 +/* CF-mips driver
 +   This is a block driver for the direct (mmaped) interface to the CF-slot,
@@ -974,17 +983,8 @@ diff -urN linux.old/drivers/block/rb500/bdev.c linux.dev/drivers/block/rb500/bde
 +
 diff -urN linux.old/drivers/block/rb500/Makefile linux.dev/drivers/block/rb500/Makefile
 --- linux.old/drivers/block/rb500/Makefile     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/block/rb500/Makefile     2006-06-08 22:14:58.000000000 +0200
++++ linux.dev/drivers/block/rb500/Makefile     2006-10-26 00:11:14.000000000 +0200
 @@ -0,0 +1,3 @@
 +## Makefile for the RB532 CF port
 +
 +obj-y         += bdev.o ata.o
-diff -urN linux.old/drivers/Makefile linux.dev/drivers/Makefile
---- linux.old/drivers/Makefile 2006-06-08 20:20:52.000000000 +0200
-+++ linux.dev/drivers/Makefile 2006-06-08 22:14:58.000000000 +0200
-@@ -73,3 +73,4 @@
- obj-y                         += firmware/
- obj-$(CONFIG_CRYPTO)          += crypto/
- obj-$(CONFIG_SUPERH)          += sh/
-+obj-$(CONFIG_BLK_DEV_CF_MIPS) += block/rb500/
-\ No newline at end of file