ralink: update patches

[openwrt.git] / target / linux / ramips / image / lzma-loader / src / head.S

diff --git a/target/linux/ramips/image/lzma-loader/src/head.S b/target/linux/ramips/image/lzma-loader/src/head.S
new file mode 100644 (file)
index 0000000..543996a
--- /dev/null
+++ b/target/linux/ramips/image/lzma-loader/src/head.S
@@ -0,0 +1,118 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *     Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *     Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include "cp0regdef.h"
+#include "cacheops.h"
+#include "config.h"
+
+#define KSEG0          0x80000000
+
+       .macro  ehb
+       sll     zero, 3
+       .endm
+
+       .text
+
+LEAF(startup)
+       .set noreorder
+       .set mips32
+
+       mtc0    zero, CP0_WATCHLO       # clear watch registers
+       mtc0    zero, CP0_WATCHHI
+       mtc0    zero, CP0_CAUSE         # clear before writing status register
+
+       mfc0    t0, CP0_STATUS
+       li      t1, 0x1000001f
+       or      t0, t1
+       xori    t0, 0x1f
+       mtc0    t0, CP0_STATUS
+       ehb
+
+       mtc0    zero, CP0_COUNT
+       mtc0    zero, CP0_COMPARE
+       ehb
+
+       la      t0, __reloc_label       # get linked address of label
+       bal     __reloc_label           # branch and link to label to
+       nop                             # get actual address
+__reloc_label:
+       subu    t0, ra, t0              # get reloc_delta
+
+       beqz    t0, __reloc_done         # if delta is 0 we are in the right place
+       nop
+
+       /* Copy our code to the right place */
+       la      t1, _code_start         # get linked address of _code_start
+       la      t2, _code_end           # get linked address of _code_end
+       addu    t0, t0, t1              # calculate actual address of _code_start
+
+__reloc_copy:
+       lw      t3, 0(t0)
+       sw      t3, 0(t1)
+       add     t1, 4
+       blt     t1, t2, __reloc_copy
+       add     t0, 4
+
+       /* flush cache */
+       la      t0, _code_start
+       la      t1, _code_end
+
+       li      t2, ~(CONFIG_CACHELINE_SIZE - 1)
+       and     t0, t2
+       and     t1, t2
+       li      t2, CONFIG_CACHELINE_SIZE
+
+       b       __flush_check
+       nop
+
+__flush_line:
+       cache   Hit_Writeback_Inv_D, 0(t0)
+       cache   Hit_Invalidate_I, 0(t0)
+       add     t0, t2
+
+__flush_check:
+       bne     t0, t1, __flush_line
+       nop
+
+       sync
+
+__reloc_done:
+
+       /* clear bss */
+       la      t0, _bss_start
+       la      t1, _bss_end
+       b       __bss_check
+       nop
+
+__bss_fill:
+       sw      zero, 0(t0)
+       addi    t0, 4
+
+__bss_check:
+       bne     t0, t1, __bss_fill
+       nop
+
+       /* Setup new "C" stack */
+       la      sp, _stack
+
+       /* jump to the decompressor routine */
+       la      t0, loader_main
+       jr      t0
+       nop
+
+       .set reorder
+END(startup)