ramips: soc wmac eeprom cleanup

[openwrt.git] / target / linux / ramips / dts / RTN56U.dts

diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts
index db638f7..4b72583 100644 (file)
--- a/target/linux/ramips/dts/RTN56U.dts
+++ b/target/linux/ramips/dts/RTN56U.dts
@@ -6,41 +6,57 @@
        compatible = "RT-N56U", "ralink,rt3883-soc";
        model = "Asus RT-N56U";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x10000000>;
-       };
-
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite";
-                       ralink,gpiomux = "i2c", "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,pcimux = "pci-fnc";
-                       ralink,wdtmux = <0>;
-               };
-
-               timer@100 {
+               gpio1: gpio@638 {
                        status = "okay";
                };
+       };
 
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
+       };
 
-               gpio1: gpio@638 {
-                       status = "okay";
+       ethernet@10100000 {
+                       mtd-mac-address = <&factory 0x4>;
+               port@0 {
+                       ralink,fixed-link = <1000 1 1 1>;
                };
        };
 
-       ethernet@10100000 {
+       pci@10140000 {
                status = "okay";
 
-               ralink,fixed-link = <1000 1 1 1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pci_pins>;
+               pci_pins: pci {
+                       pci {
+                               ralink,group = "pci";
+                               ralink,function = "pci-fnc";
+                       };
+               };
+
+               host-bridge {
+                       pci-bridge@1 {
+                               status = "okay";
+                               wmac@0,0 {
+                                        compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+                                        reg = < 0x10000 0 0 0 0 >;
+                                        ralink,eeprom = "rt2x00pci_1_0.eeprom";
+                                };
+
+                       };
+               };
        };
 
        wmac@10180000 {
                status = "okay";
                ralink,2ghz = <0>;
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        ehci@101c0000 {
@@ -51,6 +67,38 @@
                status = "okay";
        };
 
+       nor-flash@1c000000 {
+               compatible = "cfi-flash";
+               reg = <0x1c000000 0x800000>;
+
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       reg = <0x0 0x0030000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@30000 {
+                       reg = <0x00030000 0x00010000>;
+                       label = "u-boot-env";
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       reg = <0x00040000 0x00010000>;
+                       label = "factory";
+                       read-only;
+               };
+
+               partition@50000 {
+                       reg = <0x00050000 0x007b0000>;
+                       label = "firmware";
+               };
+       };
+
        rtl8367 {
                compatible = "realtek,rtl8367";
                gpio-sda = <&gpio0 1 0>;
@@ -65,12 +113,12 @@
                poll-interval = <100>;
                reset {
                        label = "reset";
-                       gpios = <&gpio0 13 0>;
+                       gpios = <&gpio0 13 1>;
                        linux,code = <0x198>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio1 2 0>;
+                       gpios = <&gpio1 2 1>;
                        linux,code = <0x211>;
                };
        };