[lantiq] move files-3.3 -> files

[openwrt.git] / target / linux / lantiq / files / arch / mips / lantiq / xway / mach-fritz_vr9.c

diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c
new file mode 100644 (file)
index 0000000..293c7b7
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c
@@ -0,0 +1,164 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/flash.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+#include "dev-ifxhcd.h"
+#include "dev-gpio-leds.h"
+#include "dev-gpio-buttons.h"
+
+static struct mtd_partition fritz3370_partitions[] = {
+       {
+               .name   = "linux",
+               .offset = 0x0,
+               .size   = 0x400000,
+       },
+       {
+               .name   = "filesystem",
+               .offset = 0x400000,
+               .size   = 0x3000000,
+       },
+       {
+               .name   = "reserved-kernel",
+               .offset = 0x3400000,
+               .size   = 0x400000,
+       },
+       {
+               .name   = "reserved",
+               .offset = 0x3800000,
+               .size   = 0x3000000,
+       },
+       {
+               .name   = "config",
+               .offset = 0x6800000,
+               .size   = 0x200000,
+       },
+       {
+               .name   = "nand-filesystem",
+               .offset = 0x6a00000,
+               .size   = 0x1600000,
+       },
+};
+
+static struct mtd_partition spi_flash_partitions[] = {
+       {
+               .name   = "urlader",
+               .offset = 0x0,
+               .size   = 0x20000,
+       },
+       {
+               .name   = "tffs",
+               .offset = 0x20000,
+               .size   = 0x10000,
+       },
+       {
+               .name   = "tffs",
+               .offset = 0x30000,
+               .size   = 0x10000,
+       },
+};
+
+static struct gpio_led
+fritz3370_gpio_leds[] __initdata = {
+       { .name = "soc:green:1", .gpio = 32, .active_low = 1, .default_trigger = "default-on" },
+       { .name = "soc:red:2", .gpio = 33, .active_low = 1, .default_trigger = "default-on" },
+       { .name = "soc:red:3", .gpio = 34, .active_low = 1, .default_trigger = "default-on" },
+       { .name = "soc:green:4", .gpio = 35, .active_low = 1, .default_trigger = "default-on" },
+       { .name = "soc:green:5", .gpio = 36, .active_low = 1, .default_trigger = "default-on" },
+       { .name = "soc:green:6", .gpio = 47, .active_low = 1, .default_trigger = "default-on" },
+};
+
+static struct gpio_keys_button
+fritz3370_gpio_keys[] __initdata = {
+       {
+               .desc = "wifi",
+               .type = EV_KEY,
+               .code = BTN_0,
+               .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = 29,
+               .active_low = 1,
+       },
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+       .mii_mode       = PHY_INTERFACE_MODE_RMII,
+};
+
+static int usb_pins[2] = { 5, 14 };
+
+#define SPI_GPIO_MRST  16
+#define SPI_GPIO_MTSR  17
+#define SPI_GPIO_CLK   18
+#define SPI_GPIO_CS0   10
+
+static struct spi_gpio_platform_data spi_gpio_data = {
+       .sck            = SPI_GPIO_CLK,
+       .mosi           = SPI_GPIO_MTSR,
+       .miso           = SPI_GPIO_MRST,
+       .num_chipselect = 2,
+};
+
+static struct platform_device spi_gpio_device = {
+       .name                   = "spi_gpio",
+       .dev.platform_data      = &spi_gpio_data,
+};
+
+static struct flash_platform_data spi_flash_data = {
+       .name           = "SPL",
+       .parts          = spi_flash_partitions,
+       .nr_parts       = ARRAY_SIZE(spi_flash_partitions),
+};
+
+static struct spi_board_info spi_flash __initdata = {
+       .modalias               = "m25p80",
+       .bus_num                = 0,
+       .chip_select            = 0,
+       .max_speed_hz           = 10 * 1000 * 1000,
+       .mode                   = SPI_MODE_3,
+       .chip_select            = 0,
+       .controller_data        = (void *) SPI_GPIO_CS0,
+       .platform_data          = &spi_flash_data
+};
+
+static void __init
+spi_gpio_init(void)
+{
+       spi_register_board_info(&spi_flash, 1);
+       platform_device_register(&spi_gpio_device);
+}
+
+static void __init
+fritz3370_init(void)
+{
+       spi_gpio_init();
+       platform_device_register_simple("pcie-xway", 0, NULL, 0);
+       xway_register_nand(fritz3370_partitions, ARRAY_SIZE(fritz3370_partitions));
+       xway_register_hcd(usb_pins);
+       ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz3370_gpio_leds), fritz3370_gpio_leds);
+       ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+               ARRAY_SIZE(fritz3370_gpio_keys), fritz3370_gpio_keys);
+       ltq_register_vrx200(&ltq_eth_data);
+}
+
+MIPS_MACHINE(LANTIQ_MACH_FRITZ3370,
+                       "FRITZ3370",
+                       "FRITZ!BOX 3370",
+                       fritz3370_init);