brcm63xx: add linux 4.4 support

[openwrt.git] / target / linux / brcm63xx / patches-4.4 / 567-board_dsl-2751b_e1.patch

diff --git a/target/linux/brcm63xx/patches-4.4/567-board_dsl-2751b_e1.patch b/target/linux/brcm63xx/patches-4.4/567-board_dsl-2751b_e1.patch
new file mode 100644 (file)
index 0000000..15563b4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/567-board_dsl-2751b_e1.patch
@@ -0,0 +1,94 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -152,6 +152,75 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
++      { .offset = 96, .value = 0x2046 },
++      { .offset = 97, .value = 0xfe9d },
++      { .offset = 98, .value = 0x1854 },
++      { .offset = 99, .value = 0xfa59 },
++      { .offset = 112, .value = 0x2046 },
++      { .offset = 113, .value = 0xfe79 },
++      { .offset = 114, .value = 0x17f5 },
++      { .offset = 115, .value = 0xfa47 },
++      { .offset = 161, .value = 0x2222 },
++      { .offset = 162, .value = 0x2222 },
++      { .offset = 169, .value = 0x2222 },
++      { .offset = 170, .value = 0x2222 },
++      { .offset = 171, .value = 0x5555 },
++      { .offset = 172, .value = 0x5555 },
++      { .offset = 173, .value = 0x4444 },
++      { .offset = 174, .value = 0x4444 },
++      { .offset = 175, .value = 0x5555 },
++      { .offset = 176, .value = 0x5555 },
++};
++
++static struct board_info __initdata board_dsl_2751b_d1 = {
++      .name                           = "AW5200B",
++      .expected_cpu_id                = 0x6318,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = dsl2751b_e1_fixups,
++              .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ 
+ /*
+@@ -2163,6 +2232,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
+       &board_96318ref_p300,
++      &board_dsl_2751b_d1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -2256,6 +2326,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref_p300", .data = &board_96318ref_p300, },
++      { .compatible = "d-link,dsl-275xb-d", .data = &board_dsl_2751b_d1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n", .data = &board_A4001N, },