brcm63xx: add linux 4.4 support

[openwrt.git] / target / linux / brcm63xx / patches-4.4 / 532-board_AR-5381u.patch

diff --git a/target/linux/brcm63xx/patches-4.4/532-board_AR-5381u.patch b/target/linux/brcm63xx/patches-4.4/532-board_AR-5381u.patch
new file mode 100644 (file)
index 0000000..cc7f790
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/532-board_AR-5381u.patch
@@ -0,0 +1,80 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -139,6 +139,61 @@ static struct board_info __initdata boar
+       },
+ };
+ 
++static struct sprom_fixup __initdata ar5381u_fixups[] = {
++      { .offset = 97, .value = 0xfee5 },
++      { .offset = 98, .value = 0x157c },
++      { .offset = 99, .value = 0xfae7 },
++      { .offset = 113, .value = 0xfefa },
++      { .offset = 114, .value = 0x15d6 },
++      { .offset = 115, .value = 0xfaf8 },
++};
++
++static struct board_info __initdata board_AR5381u = {
++      .name                                   = "96328A-1241N",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5381u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5381u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata ar5387un_fixups[] = {
+       { .offset = 2, .value = 0x05bb },
+       { .offset = 65, .value = 0x1204 },
+@@ -1618,6 +1673,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
+       &board_A4001N1,
+@@ -1689,6 +1745,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
+ #endif