bcm63xx: add support for linux 3.8

[openwrt.git] / target / linux / brcm63xx / patches-3.8 / 532-board_96328a-1241N.patch

diff --git a/target/linux/brcm63xx/patches-3.8/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.8/532-board_96328a-1241N.patch
new file mode 100644 (file)
index 0000000..a0de0da
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/532-board_96328a-1241N.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -145,6 +145,72 @@ static struct board_info __initdata boar
+       },
+ };
+ 
++static struct board_info __initdata board_96328A_1241N = {
++      .name                                   = "96328A-1241N",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_uart0                              = 1,
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name                   = "96328A-1241N:green:power",
++                      .gpio                   = 4,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "96328A-1241N:red:alarm",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "96328A-1241N:green:inet",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_96328A_1441N1 = {
+       .name                                   = "96328A-1441N1",
+       .expected_cpu_id                        = 0x6328,
+@@ -3116,6 +3182,7 @@ static struct board_info __initdata boar
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_96328A_1241N,
+       &board_96328A_1441N1,
+       &board_963281TAN,
+       &board_963281T_TEF,