brcm63xx: add kernel 3.18 support

[openwrt.git] / target / linux / brcm63xx / patches-3.18 / 524-board_dsl_274xb_rev_f.patch

diff --git a/target/linux/brcm63xx/patches-3.18/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.18/524-board_dsl_274xb_rev_f.patch
new file mode 100644 (file)
index 0000000..d8b8cc4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/524-board_dsl_274xb_rev_f.patch
@@ -0,0 +1,140 @@
+From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 30 Apr 2012 09:10:51 +0200
+Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
+ DSL-274xB rev F1
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
+ 1 files changed, 104 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -224,6 +224,111 @@ static struct board_info __initdata boar
+ 
+       },
+ };
++
++static struct board_info __initdata board_dsl_274xb_f1 = {
++      .name                           = "AW4339U",
++      .expected_cpu_id                = 0x6328,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor         = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset = 0x7d1000,
++                      .slot           = 0,
++                      .led_pin        = -1,
++              },
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 1",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "dsl-274xb:red:internet",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:dsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "dsl-274xb:red:power",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:blue:wps",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:internet",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "wifi",
++                      .gpio           = 10,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = BTN_0,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "reset",
++                      .gpio           = 23,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 24,
++                      .active_low     = 1,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ 
+ /*
+@@ -2176,6 +2281,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -2234,6 +2340,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },