+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-#ifndef AR5312_H
-#define AR5312_H
-
-#include <asm/addrspace.h>
-
-/*
- * IRQs
- */
-
-#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-
-
-/* Address Map */
-#define AR531X_WLAN0 0x18000000
-#define AR531X_WLAN1 0x18500000
-#define AR531X_ENET0 0x18100000
-#define AR531X_ENET1 0x18200000
-#define AR531X_SDRAMCTL 0x18300000
-#define AR531X_FLASHCTL 0x18400000
-#define AR531X_APBBASE 0x1c000000
-#define AR531X_FLASH 0x1e000000
-#define AR531X_UART0 0xbc000003 /* UART MMR */
-
-/*
- * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
- * should be considered available. The AR5312 supports 2 enet MACS,
- * even though many reference boards only actually use 1 of them
- * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
- * The AR2312 supports 1 enet MAC.
- */
-#define AR531X_NUM_ENET_MAC 2
-
-/*
- * Need these defines to determine true number of ethernet MACs
- */
-#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-#define AR531X_RADIO_MASK_OFF 0xc8
-#define AR531X_RADIO0_MASK 0x0003
-#define AR531X_RADIO1_MASK 0x000c
-#define AR531X_RADIO1_S 2
-
-/*
- * AR531X_NUM_WMAC defines the number of Wireless MACs that\
- * should be considered available.
- */
-#define AR531X_NUM_WMAC 2
-
-/* Reset/Timer Block Address Map */
-#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
-#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
-#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
-#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
-#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
-#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
-#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
-#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
-#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
-#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
-
-/* AR531X_WD_CTRL register bit field definitions */
-#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-#define AR531X_WD_CTRL_NMI 0x0001
-#define AR531X_WD_CTRL_RESET 0x0002
-
-/* AR531X_ISR register bit field definitions */
-#define AR531X_ISR_NONE 0x0000
-#define AR531X_ISR_TIMER 0x0001
-#define AR531X_ISR_AHBPROC 0x0002
-#define AR531X_ISR_AHBDMA 0x0004
-#define AR531X_ISR_GPIO 0x0008
-#define AR531X_ISR_UART0 0x0010
-#define AR531X_ISR_UART0DMA 0x0020
-#define AR531X_ISR_WD 0x0040
-#define AR531X_ISR_LOCAL 0x0080
-
-/* AR531X_RESET register bit field definitions */
-#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
-#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
-#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
-#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-
-#define AR531X_RESET_WMAC0_BITS \
- AR531X_RESET_WLAN0 |\
- AR531X_RESET_WARM_WLAN0_MAC |\
- AR531X_RESET_WARM_WLAN0_BB
-
-#define AR531X_RESERT_WMAC1_BITS \
- AR531X_RESET_WLAN1 |\
- AR531X_RESET_WARM_WLAN1_MAC |\
- AR531X_RESET_WARM_WLAN1_BB
-
-/* AR5312_CLOCKCTL1 register bit field definitions */
-#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-
-/* Valid for AR5312 and AR2312 */
-#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-
-/* Valid for AR2313 */
-#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-
-
-/* AR531X_ENABLE register bit field definitions */
-#define AR531X_ENABLE_WLAN0 0x0001
-#define AR531X_ENABLE_ENET0 0x0002
-#define AR531X_ENABLE_ENET1 0x0004
-#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-#define AR531X_ENABLE_WLAN1 \
- (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-
-/* AR531X_REV register bit field definitions */
-#define AR531X_REV_WMAC_MAJ 0xf000
-#define AR531X_REV_WMAC_MAJ_S 12
-#define AR531X_REV_WMAC_MIN 0x0f00
-#define AR531X_REV_WMAC_MIN_S 8
-#define AR531X_REV_MAJ 0x00f0
-#define AR531X_REV_MAJ_S 4
-#define AR531X_REV_MIN 0x000f
-#define AR531X_REV_MIN_S 0
-#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
-
-/* Major revision numbers, bits 7..4 of Revision ID register */
-#define AR531X_REV_MAJ_AR5312 0x4
-#define AR531X_REV_MAJ_AR2313 0x5
-
-/* Minor revision numbers, bits 3..0 of Revision ID register */
-#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-
-/* AR531X_FLASHCTL register bit field definitions */
-#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-#define FLASHCTL_IDCY_S 0
-#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-#define FLASHCTL_WST1_S 5
-#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-#define FLASHCTL_WST2_S 11
-#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-#define FLASHCTL_AC_S 16
-#define FLASHCTL_AC_128K 0x00000000
-#define FLASHCTL_AC_256K 0x00010000
-#define FLASHCTL_AC_512K 0x00020000
-#define FLASHCTL_AC_1M 0x00030000
-#define FLASHCTL_AC_2M 0x00040000
-#define FLASHCTL_AC_4M 0x00050000
-#define FLASHCTL_AC_8M 0x00060000
-#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-#define FLASHCTL_WP 0x04000000 /* Write protect */
-#define FLASHCTL_BM 0x08000000 /* Burst mode */
-#define FLASHCTL_MW 0x30000000 /* Memory width */
-#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
-#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
-#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
-#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-
-/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
-#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
-#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
-
-/* ARM SDRAM Controller -- just enough to determine memory size */
-#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-#define MEM_CFG1_AC0_S 8
-#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-#define MEM_CFG1_AC1_S 12
-
-/* GPIO Address Map */
-#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
-#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
-#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
-#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
-
-/* GPIO Control Register bit field definitions */
-#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
-#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
-#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
-#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
-
-#endif
-
projects / openwrt.git / blobdiff