ar71xx: add linux 3.10

[openwrt.git] / target / linux / ar71xx / patches-3.10 / 406-mtd-m25p80-allow-to-specify-max-read-size.patch

diff --git a/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch
new file mode 100644 (file)
index 0000000..3f9c182
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch
@@ -0,0 +1,109 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -93,6 +93,7 @@ struct m25p {
+       u8                      erase_opcode;
+       u8                      *command;
+       bool                    fast_read;
++      size_t                  max_read_len;
+ };
+ 
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -344,6 +345,7 @@ static int m25p80_read(struct mtd_info *
+       struct spi_transfer t[2];
+       struct spi_message m;
+       uint8_t opcode;
++      loff_t ofs;
+ 
+       pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+                       __func__, (u32)from, len);
+@@ -359,19 +361,10 @@ static int m25p80_read(struct mtd_info *
+       t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
+       spi_message_add_tail(&t[0], &m);
+ 
+-      t[1].rx_buf = buf;
+-      t[1].len = len;
+       spi_message_add_tail(&t[1], &m);
+ 
+       mutex_lock(&flash->lock);
+ 
+-      /* Wait till previous write/erase is done. */
+-      if (wait_till_ready(flash)) {
+-              /* REVISIT status return?? */
+-              mutex_unlock(&flash->lock);
+-              return 1;
+-      }
+-
+       /* FIXME switch to OPCODE_FAST_READ.  It's required for higher
+        * clocks; and at this writing, every chip this driver handles
+        * supports that opcode.
+@@ -380,13 +373,43 @@ static int m25p80_read(struct mtd_info *
+       /* Set up the write data buffer. */
+       opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ;
+       flash->command[0] = opcode;
+-      m25p_addr2cmd(flash, from, flash->command);
++      ofs = 0;
++      while (len) {
++              size_t readlen;
++              size_t done;
++              int ret;
++
++              ret = wait_till_ready(flash);
++              if (ret) {
++                      mutex_unlock(&flash->lock);
++                      return 1;
++              }
++
++              if (flash->max_read_len > 0 &&
++                  flash->max_read_len < len)
++                      readlen = flash->max_read_len;
++              else
++                      readlen = len;
++
++              t[1].rx_buf = buf + ofs;
++              t[1].len = readlen;
++
++              m25p_addr2cmd(flash, from + ofs, flash->command);
++
++              spi_sync(flash->spi, &m);
+ 
+-      spi_sync(flash->spi, &m);
++              done = m.actual_length - m25p_cmdsz(flash) -
++                     (flash->fast_read ? 1 : 0);
++              if (done != readlen) {
++                      mutex_unlock(&flash->lock);
++                      return 1;
++              }
+ 
+-      *retlen = m.actual_length - m25p_cmdsz(flash) -
+-                      (flash->fast_read ? 1 : 0);
++              ofs += done;
++              len -= done;
++      }
+ 
++      *retlen = ofs;
+       mutex_unlock(&flash->lock);
+ 
+       return 0;
+@@ -1021,6 +1044,12 @@ static int m25p_probe(struct spi_device 
+               flash->mtd._unlock = m25p80_unlock;
+       }
+ 
++      if (data && data->max_read_len) {
++              flash->max_read_len = data->max_read_len;
++              dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
++                      flash->max_read_len);
++      }
++
+       /* sst flash chips use AAI word program */
+       if (info->flags & SST_WRITE)
+               flash->mtd._write = sst_write;
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -25,6 +25,7 @@ struct flash_platform_data {
+ 
+       char            *type;
+ 
++      size_t          max_read_len;
+       /* we'll likely add more ... use JEDEC IDs, etc */
+ };
+