strip the kernel version suffix from target directories, except for brcm-2.4 (the...
[openwrt.git] / target / linux / adm5120-2.6 / files / arch / mips / adm5120 / boards / mikrotik.c
diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c
deleted file mode 100644 (file)
index f233772..0000000
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *  $Id$
- *
- *  Mikrotik RouterBOARDs 111/112/133/133C/150/153
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static struct mtd_partition rb1xx_partitions[] = {
-       {
-               .name   = "booter",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct platform_device *rb1xx_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_nand_device,
-};
-
-static struct platform_device *rb150_devices[] __initdata = {
-       &adm5120_flash0_device,
-       /* TODO: nand device is not yet supported */
-};
-
-static void __init rb1xx_setup(void)
-{
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
-       adm5120_flash0_data.parts = rb1xx_partitions;
-
-       /* TODO: setup mac address */
-}
-
-#if 0
-/*
- * RB1xx boards have bad network performance with the default VLAN matrixes.
- * Disable it while the ethernet driver gets fixed.
- */
-static unsigned char rb11x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x44, 0x42, 0x41, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133c_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x44, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb15x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-#else
-static unsigned char rb_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-#define rb11x_vlans    rb_vlans
-#define rb133_vlans    rb_vlans
-#define rb133c_vlans   rb_vlans
-#define rb15x_vlans    rb_vlans
-#endif
-
-static struct adm5120_board rb111_board __initdata = {
-       .mach_type      = MACH_ADM5120_RB_111,
-       .name           = "Mikrotik RouterBOARD 111",
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 1,
-       .eth_vlans      = rb11x_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-};
-
-static struct adm5120_board rb112_board __initdata = {
-       .mach_type      = MACH_ADM5120_RB_112,
-       .name           = "Mikrotik RouterBOARD 112",
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 1,
-       .eth_vlans      = rb11x_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-};
-
-static struct adm5120_board rb133_board __initdata = {
-       .mach_type      = MACH_ADM5120_RB_133,
-       .name           = "Mikrotik RouterBOARD 133",
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 3,
-       .eth_vlans      = rb133_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-};
-
-static struct adm5120_board rb133c_board __initdata = {
-       .mach_type      = MACH_ADM5120_RB_133C,
-       .name           = "Mikrotik RouterBOARD 133C",
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 1,
-       .eth_vlans      = rb133c_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-};
-
-static struct adm5120_board rb150_board __initdata = {
-       .mach_type      = MACH_ADM5120_RB_150,
-       .name           = "Mikrotik RouterBOARD 150",
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = rb15x_vlans,
-       .num_devices    = ARRAY_SIZE(rb150_devices),
-       .devices        = rb150_devices,
-};
-
-static struct adm5120_board rb153_board __initdata = {
-       .mach_type      = MACH_ADM5120_RB_153,
-       .name           = "Mikrotik RouterBOARD 153",
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = rb15x_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-};
-
-static int __init register_boards(void)
-{
-       adm5120_board_register(&rb111_board);
-       adm5120_board_register(&rb112_board);
-       adm5120_board_register(&rb133_board);
-       adm5120_board_register(&rb133c_board);
-       adm5120_board_register(&rb150_board);
-       adm5120_board_register(&rb153_board);
-       return 0;
-}
-
-pure_initcall(register_boards);