ixp4xx: drop 3.14 support

[15.05/openwrt.git] / target / linux / ixp4xx / patches-3.14 / 132-wrt300nv2_mac_fix.patch

diff --git a/target/linux/ixp4xx/patches-3.14/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-3.14/132-wrt300nv2_mac_fix.patch
deleted file mode 100644 (file)
index 99db267..0000000
--- a/target/linux/ixp4xx/patches-3.14/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
-  *
-  * Board setup for the Linksys WRT300N v2
-  *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-  *
-  * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
- 
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
-       {
--              .phy            = -1,
-+              .phy            = IXP4XX_ETH_PHY_MAX_ADDR,
-+              .phy_mask       = 0x0F0000,
-               .rxq            = 3,
-               .txreadyq       = 20,
-       }, {
-@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
- 
- static void __init wrt300nv2_init(void)
- {
-+      uint8_t __iomem *f;
-+      int offset = 0;
-+      int i;
-+
-       ixp4xx_sys_init();
- 
-       wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
-       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
- 
-       platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+      f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+      if (f) {
-+              for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+                      wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+                      if (i == 5)
-+                              offset = 1;
-+                      wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+                      wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+                      if (i == 5)
-+                              offset = 1;
-+                      wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+              }
-+              iounmap(f);
-+      }
-+
-+      if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+              random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+      if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+              memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+              wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+      }
- }
- 
- #ifdef CONFIG_MACH_WRT300NV2