b53: clean up code to match kernel style better

[15.05/openwrt.git] / target / linux / generic / files / drivers / net / phy / b53 / b53_common.c

diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
index e44d194..d2bb51a 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
+++ b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
@@ -525,7 +525,8 @@ static int b53_switch_reset(struct b53_device *dev)
                                return -EINVAL;
                        }
                }
-       } else if ((is531x5(dev) || is5301x(dev)) && dev->sw_dev.cpu_port == B53_CPU_PORT) {
+       } else if ((is531x5(dev) || is5301x(dev)) &&
+                  dev->sw_dev.cpu_port == B53_CPU_PORT) {
                u8 mii_port_override;
 
                b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
@@ -1161,7 +1162,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
                .alias = "bcm53011",
                .vlans = 4096,
                .enabled_ports = 0x1f,
-               .cpu_port = B53_CPU_PORT_25, // TODO: auto detect
+               .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
                .vta_regs = B53_VTA_REGS,
                .duplex_reg = B53_DUPLEX_STAT_GE,
                .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -1174,7 +1175,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
                .alias = "bcm53011",
                .vlans = 4096,
                .enabled_ports = 0x1f,
-               .cpu_port = B53_CPU_PORT_25, // TODO: auto detect
+               .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
                .vta_regs = B53_VTA_REGS,
                .duplex_reg = B53_DUPLEX_STAT_GE,
                .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -1187,7 +1188,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
                .alias = "bcm53011",
                .vlans = 4096,
                .enabled_ports = 0x1f,
-               .cpu_port = B53_CPU_PORT_25, // TODO: auto detect
+               .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
                .vta_regs = B53_VTA_REGS,
                .duplex_reg = B53_DUPLEX_STAT_GE,
                .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -1200,7 +1201,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
                .alias = "bcm53018",
                .vlans = 4096,
                .enabled_ports = 0x1f,
-               .cpu_port = B53_CPU_PORT_25, // TODO: auto detect
+               .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
                .vta_regs = B53_VTA_REGS,
                .duplex_reg = B53_DUPLEX_STAT_GE,
                .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -1213,7 +1214,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
                .alias = "bcm53019",
                .vlans = 4096,
                .enabled_ports = 0x1f,
-               .cpu_port = B53_CPU_PORT_25, // TODO: auto detect
+               .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
                .vta_regs = B53_VTA_REGS,
                .duplex_reg = B53_DUPLEX_STAT_GE,
                .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -1307,7 +1308,8 @@ static int b53_switch_init(struct b53_device *dev)
 
        dev->reset_gpio = b53_switch_get_reset_gpio(dev);
        if (dev->reset_gpio >= 0) {
-               ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, GPIOF_OUT_INIT_HIGH, "robo_reset");
+               ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
+                                           GPIOF_OUT_INIT_HIGH, "robo_reset");
                if (ret)
                        return ret;
        }