--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCPCIH
+#define __INCPCIH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "pci/mvPciRegs.h"
+
+
+/* NOTE not supported in this driver:
+
+ Built In Self Test (BIST)
+ Vital Product Data (VPD)
+ Message Signaled Interrupt (MSI)
+ Power Management
+ Compact PCI Hot Swap
+ Header retarget
+
+Registers not supported:
+1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0)
+2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C)
+*/
+
+/* defines */
+/* The number of supported PCI interfaces depend on Marvell controller */
+/* device number. This device number ID is located on the PCI unit */
+/* configuration header. This creates a loop where calling PCI */
+/* configuration read/write routine results a call to get PCI configuration */
+/* information etc. This macro defines a default PCI interface. This PCI */
+/* interface is sure to exist. */
+#define PCI_DEFAULT_IF 0
+
+
+/* typedefs */
+/* The Marvell controller supports both conventional PCI and PCI-X. */
+/* This enumeration describes the PCI type. */
+typedef enum _mvPciType
+{
+ MV_PCI_CONV, /* Conventional PCI */
+ MV_PCIX /* PCI-X */
+}MV_PCI_TYPE;
+
+typedef enum _mvPciMod
+{
+ MV_PCI_MOD_HOST,
+ MV_PCI_MOD_DEVICE
+}MV_PCI_MOD;
+
+
+/* The Marvell controller supports both PCI width of 32 and 64 bit. */
+/* This enumerator describes PCI width */
+typedef enum _mvPciWidth
+{
+ MV_PCI_32, /* PCI width 32bit */
+ MV_PCI_64 /* PCI width 64bit */
+}MV_PCI_WIDTH;
+
+/* This structure describes the PCI unit configured type, speed and width. */
+typedef struct _mvPciMode
+{
+ MV_PCI_TYPE pciType; /* PCI type */
+ MV_U32 pciSpeed; /* Assuming PCI base clock on board is 33MHz */
+ MV_PCI_WIDTH pciWidth; /* PCI bus width */
+}MV_PCI_MODE;
+
+/* mvPciInit - Initialize PCI interfaces*/
+MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod);
+
+/* mvPciCommandSet - Set PCI comman register value.*/
+MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command);
+
+/* mvPciModeGet - Get PCI interface mode.*/
+MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode);
+
+/* mvPciRetrySet - Set PCI retry counters*/
+MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter);
+
+/* mvPciDiscardTimerSet - Set PCI discard timer*/
+MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles);
+
+/* mvPciArbEnable - PCI arbiter enable/disable*/
+MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciArbParkDis - Disable arbiter parking on agent */
+MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask);
+
+/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */
+MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles);
+
+/* mvPciConfigRead - Read from configuration space */
+MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func,MV_U32 regOff);
+
+/* mvPciConfigWrite - Write to configuration space */
+MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/
+MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/
+MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable);
+
+/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/
+MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum);
+
+/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/
+MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf);
+
+/* mvPciLocalDevNumSet - Set PCI interface local device number.*/
+MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum);
+
+/* mvPciLocalDevNumGet - Get PCI interface local device number.*/
+MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf);
+
+
+#endif /* #ifndef __INCPCIH */
+
+
+
projects / 15.05 / openwrt.git / blobdiff