project/netifd.git
10 years agowireless: fix cancelling setup
Felix Fietkau [Thu, 15 May 2014 19:08:18 +0000 (21:08 +0200)]
wireless: fix cancelling setup

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agosystem-linux: always set the ifindex for hotplug devices on init
Felix Fietkau [Sat, 10 May 2014 18:03:22 +0000 (20:03 +0200)]
system-linux: always set the ifindex for hotplug devices on init

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Fix node version set after free
Hans Dedecker [Wed, 7 May 2014 09:19:09 +0000 (09:19 +0000)]
netifd: Fix node version set after free

Fixes an issue where a bridge member will be removed from the bridge
upon an interface ifup as the bridge node version -1 is overwritten
by vlist_add while the new created bridge member pointer is freed in
bridge_member_update

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Check interface state only when main device is set during interface_change_config
Hans Dedecker [Wed, 7 May 2014 09:19:08 +0000 (09:19 +0000)]
netifd: Check interface state only when main device is set during interface_change_config

Fixes a regression issue introduced by commit d2a33f3f0fe704e4396fa2ada08401cb955ba7cb for device less protocol handlers.
An active interface using a deviceless protocol handler will be be teared down when the interface config is checked upon
an update as the interface link and enabled parameters are unset as no underlying device is present (eg tunnel interfaces)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Effectively apply configured route mtu
Hans Dedecker [Wed, 7 May 2014 09:19:07 +0000 (09:19 +0000)]
netifd: Effectively apply configured route mtu

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Remove useless route table parameter check in update_proto_route
Hans Dedecker [Wed, 7 May 2014 09:19:06 +0000 (09:19 +0000)]
netifd: Remove useless route table parameter check in update_proto_route

Not necessary since route table parameter is used as key element in route_cmp

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Don't assume routes are always applied in all cases
Hans Dedecker [Wed, 7 May 2014 09:19:05 +0000 (09:19 +0000)]
netifd: Don't assume routes are always applied in all cases

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Apply interface metric on configured interface gateway parameters
Hans Dedecker [Wed, 7 May 2014 09:19:04 +0000 (09:19 +0000)]
netifd: Apply interface metric on configured interface gateway parameters

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agodevice: prevent interface up/down calls for external devices
Felix Fietkau [Tue, 6 May 2014 18:02:00 +0000 (20:02 +0200)]
device: prevent interface up/down calls for external devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface: clear iface->available before changing main_dev
Felix Fietkau [Fri, 2 May 2014 17:04:42 +0000 (19:04 +0200)]
interface: clear iface->available before changing main_dev

Fixes bogus interface restart loop on interface_remove_link

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface: use interface_set_main_dev() from interface_remove_link
Felix Fietkau [Fri, 2 May 2014 17:07:18 +0000 (19:07 +0200)]
interface: use interface_set_main_dev() from interface_remove_link

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface: do not set l3_dev along with main_dev anymore
Felix Fietkau [Fri, 2 May 2014 17:03:48 +0000 (19:03 +0200)]
interface: do not set l3_dev along with main_dev anymore

Made unnecessary by recent fixes to l3_dev handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface-ip: fix misuse of IN6_IS_ADDR_LINKLOCAL on a netifd specific union
Felix Fietkau [Tue, 29 Apr 2014 13:24:48 +0000 (15:24 +0200)]
interface-ip: fix misuse of IN6_IS_ADDR_LINKLOCAL on a netifd specific union

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: fix a use-after-free issue on wireless config update
Felix Fietkau [Tue, 29 Apr 2014 13:16:21 +0000 (15:16 +0200)]
netifd: fix a use-after-free issue on wireless config update

After vlist_add() the device could have been freed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Add interface config support to enable/disable IPv6 in the kernel per device
Hans Dedecker [Mon, 7 Apr 2014 11:30:52 +0000 (13:30 +0200)]
netifd: Add interface config support to enable/disable IPv6 in the kernel per device

Main use case is being able to disable IPv6 on (a) WAN interface(s) when only IPv4 connectivity is offered or 6rd is used.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agointerface-event: make eventnames static and const
Felix Fietkau [Wed, 23 Apr 2014 09:44:09 +0000 (11:44 +0200)]
interface-event: make eventnames static and const

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Rework hotplug event queueing in case of congestion
Hans Dedecker [Mon, 7 Apr 2014 11:30:51 +0000 (13:30 +0200)]
netifd: Rework hotplug event queueing in case of congestion

In case of event congestion (e.g. when several interfaces become active in a short notice) :
-hotplug events will be handled on a first come first served basis (before it was lifo)
-drop a new ifupdate event in favour of an already queued ifup event (before the ifup event was overwritten by the ifupdate event resulting in some hotplug scripts "missing" the ifup event)

Additonal the event flow has been documented

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Joeri Barbarien <joeri.barbarien@gmail.com>
10 years agonetifd: Check rt_table parameter when comparing routes
Hans Dedecker [Mon, 7 Apr 2014 11:30:50 +0000 (13:30 +0200)]
netifd: Check rt_table parameter when comparing routes

Allows to add identical routes in different routing tables

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Set prefix assignment enabled if the prefix adress can be installed
Hans Dedecker [Thu, 24 Apr 2014 07:51:16 +0000 (07:51 +0000)]
netifd: Set prefix assignment enabled if the prefix adress can be installed

No need to install policy routes if the prefix address cannot be installed; clean up of the policy routes
and the prefix address only needs to happen when the prefix assignment was active.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Mark interface as dynamic after it has been added in the interface list
Hans Dedecker [Thu, 24 Apr 2014 07:51:15 +0000 (07:51 +0000)]
netifd: Mark interface as dynamic after it has been added in the interface list

Adding an interface in the interface list in case of a config update will override the node version of the old interface and thus overriding the dynamic interface marker.
In case of config update interface_set_dynamic is done on an invalid interface pointer as the new interface pointer has been freed.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: fix IPv6 Link-local DNS server
Ulrich Weber [Wed, 23 Apr 2014 12:33:04 +0000 (12:33 +0000)]
netifd: fix IPv6 Link-local DNS server

interface name must be added to Link-local IPv6
DNS servers, otherwise they are unusable.

Signed-off-by: Ulrich Weber <uw@ocedo.com>
10 years agoconfig: add support for disabling interfaces
Felix Fietkau [Mon, 21 Apr 2014 17:11:34 +0000 (19:11 +0200)]
config: add support for disabling interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoubus: check the l3_dev pointer before dereferencing it
Felix Fietkau [Sat, 19 Apr 2014 09:58:16 +0000 (11:58 +0200)]
ubus: check the l3_dev pointer before dereferencing it

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface: ensure that l3_dev gets set whenever the proto handler marks the interface...
Felix Fietkau [Sat, 19 Apr 2014 09:57:50 +0000 (11:57 +0200)]
interface: ensure that l3_dev gets set whenever the proto handler marks the interface as up

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface: add support for a parameter to force setup without a carrier on the underl...
Felix Fietkau [Fri, 11 Apr 2014 13:41:15 +0000 (15:41 +0200)]
interface: add support for a parameter to force setup without a carrier on the underlying device

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoproto-static: ensure that the l3 device is properly set
Felix Fietkau [Thu, 10 Apr 2014 15:21:21 +0000 (17:21 +0200)]
proto-static: ensure that the l3 device is properly set

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoproto-shell: fix a regression with handling multiple proto updates for the same interface
Felix Fietkau [Thu, 10 Apr 2014 11:30:54 +0000 (13:30 +0200)]
proto-shell: fix a regression with handling multiple proto updates for the same interface

Preserve the device when keep == true

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoproto-shell: ensure that l3_dev is always set
Felix Fietkau [Mon, 7 Apr 2014 11:09:09 +0000 (13:09 +0200)]
proto-shell: ensure that l3_dev is always set

A link-down event clears l3_dev, so even if the proto handler does not
provide a new ifname, it still needs to be set explicitly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agointerface: always delete l3 dev on proto down
Felix Fietkau [Sat, 5 Apr 2014 17:58:01 +0000 (19:58 +0200)]
interface: always delete l3 dev on proto down

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agosystem-dummy: indicate link on present devices
Felix Fietkau [Sat, 5 Apr 2014 17:57:37 +0000 (19:57 +0200)]
system-dummy: indicate link on present devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoconfig: ignore config parser errors
Felix Fietkau [Mon, 31 Mar 2014 20:23:35 +0000 (22:23 +0200)]
config: ignore config parser errors

This helps with keeping routers reachable when there are typos in the
network config.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoubus: use list_empty() instead of the compat wrapper
Felix Fietkau [Fri, 21 Mar 2014 15:08:32 +0000 (16:08 +0100)]
ubus: use list_empty() instead of the compat wrapper

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Reload proto on topology change
Helmut Schaa [Thu, 20 Mar 2014 15:26:23 +0000 (16:26 +0100)]
netifd: Reload proto on topology change

Introduce a new device event "topology change" that gets signaled
by bridges on adding/removing members.

On "topology changes" the proto handlers are requested to "renew"
which is most useful for DHCP.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
10 years agoubus: fix displaying interface data items
Felix Fietkau [Thu, 20 Mar 2014 20:02:02 +0000 (21:02 +0100)]
ubus: fix displaying interface data items

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Check interface autostart parameter when handling interface state changes
Hans Dedecker [Thu, 20 Mar 2014 07:59:04 +0000 (08:59 +0100)]
netifd: Check interface autostart parameter when handling interface state changes

Fixes an issue when 2 interfaces make use of the same ifname (device) and one of the interfaces has autostart disabled; bringing up the other interface would also start the interface for which autostart is disabled (link_state and enabled will both be true for the autostart disabled interface and thus a setup will be launched)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agouci: Allow setting the UCI config path on the command line
Matthias Schiffer [Tue, 4 Mar 2014 17:37:03 +0000 (18:37 +0100)]
uci: Allow setting the UCI config path on the command line

Add a -c switch which allows setting an alternative UCI path instead of using
the libuci default.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
10 years agoRevert "ubus events: don't incorrectly announce an interface as being up"
Felix Fietkau [Tue, 11 Mar 2014 09:24:28 +0000 (10:24 +0100)]
Revert "ubus events: don't incorrectly announce an interface as being up"

Made obsolete by b114b86c70766f67f503077ad1de013c17fbf366

This reverts commit 4d1a597f65bbb49aa843112812d5ca929478c706.

10 years agonetifd: Set interface state in teardown state before launching an interface event
Hans Dedecker [Mon, 10 Mar 2014 15:27:53 +0000 (16:27 +0100)]
netifd: Set interface state in teardown state before launching an interface event

Interface state needs to be set in teardown state before launching an interface event otherwise the up state will be reported as true in the ubus interface notify message

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Assign interface metric to route metric when route is created
Hans Dedecker [Mon, 10 Mar 2014 15:27:52 +0000 (16:27 +0100)]
netifd: Assign interface metric to route metric when route is created

Interface metric needs to be assigned to the route metric parameter at route creation time. Otherwise if the interface metric is different from 0 route_cmp will wrongly conclude the routes are different.
In this case the route will be added/deleted and could end up with the route missing in the kernel depending on the add/delete order.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Fix bridge MTU setting when a bridge member is added
Hans Dedecker [Mon, 10 Mar 2014 15:27:51 +0000 (16:27 +0100)]
netifd: Fix bridge MTU setting when a bridge member is added

Reapply bridge mtu setting as adding a bridge member will override the bridge mtu in the kernel

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agoproto-shell: defer init until after command line option processing
Felix Fietkau [Fri, 7 Mar 2014 18:12:16 +0000 (19:12 +0100)]
proto-shell: defer init until after command line option processing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: fix bridge reloading issue
Emanuel Taube [Fri, 7 Mar 2014 09:22:12 +0000 (10:22 +0100)]
netifd: fix bridge reloading issue

Check in the right order to decide if the bridge have to be set up.
Additionally we are consistent with setting it down.

Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
10 years agowireless: defer init until after command line option processing
Felix Fietkau [Fri, 7 Mar 2014 17:49:43 +0000 (18:49 +0100)]
wireless: defer init until after command line option processing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoubus events: don't incorrectly announce an interface as being up
Steven Barth [Wed, 5 Mar 2014 17:30:59 +0000 (18:30 +0100)]
ubus events: don't incorrectly announce an interface as being up

Signed-off-by: Steven Barth <steven@midlink.org>
10 years agonetifd: Link layer state awareness support on interface level
Hans Dedecker [Tue, 11 Feb 2014 08:30:51 +0000 (08:30 +0000)]
netifd: Link layer state awareness support on interface level

The link layer state is monitored for a given interface; an interface will be setup
when both enabled and link layer active. Likewise an interface will be teared down
when either disabled or link layer down.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Link layer state awareness support on device level
Hans Dedecker [Tue, 11 Feb 2014 08:30:20 +0000 (08:30 +0000)]
netifd: Link layer state awareness support on device level

Device layer is informed by netlink events regarding the link layer status. Link
layer status change results in a DEV_EVENT_LINK_UP/DEV_EVENT_LINK_DOWN broadcast
event for a given device.

Depends on uloop error callback patch.

Solves issue reported in https://dev.openwrt.org/ticket/14590

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Acked-by: Karl Vogel <karl.vogel@gmail.com>
10 years agoDon't always assume routes & addresses are applied
Steven Barth [Wed, 26 Feb 2014 13:21:48 +0000 (14:21 +0100)]
Don't always assume routes & addresses are applied

Actually check netlink return values and remember failure.

Signed-off-by: Steven Barth <steven@midlink.org>
10 years agowireless: fix device config reload regression
Felix Fietkau [Sun, 23 Feb 2014 08:09:21 +0000 (09:09 +0100)]
wireless: fix device config reload regression

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add a "get_validate" methode to ubus
John Crispin [Mon, 17 Feb 2014 12:12:26 +0000 (12:12 +0000)]
wireless: add a "get_validate" methode to ubus

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agowireless: load and then ignore disabled devices
John Crispin [Mon, 17 Feb 2014 12:12:25 +0000 (12:12 +0000)]
wireless: load and then ignore disabled devices

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoadd validation rules to proto static
John Crispin [Mon, 17 Feb 2014 12:12:24 +0000 (12:12 +0000)]
add validation rules to proto static

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoget_proto_handlers now also dumps the validation info
John Crispin [Mon, 17 Feb 2014 12:12:23 +0000 (12:12 +0000)]
get_proto_handlers now also dumps the validation info

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agomake netifd_handler_parse_config honour the luci validation passed from the backend...
John Crispin [Mon, 17 Feb 2014 12:12:22 +0000 (12:12 +0000)]
make netifd_handler_parse_config honour the luci validation passed from the backend scripts

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoadd a helper to convert blobmsg types to luci validate rules
John Crispin [Mon, 17 Feb 2014 12:12:21 +0000 (12:12 +0000)]
add a helper to convert blobmsg types to luci validate rules

Signed-off-by: John Crispin <blogic@openwrt.org>
10 years agoWork around warn_unused_result in recent gcc/libc
Steven Barth [Sun, 16 Feb 2014 11:16:57 +0000 (12:16 +0100)]
Work around warn_unused_result in recent gcc/libc

10 years agoIPv6: work around dangling routes kernel issue
Steven Barth [Sun, 16 Feb 2014 11:10:57 +0000 (12:10 +0100)]
IPv6: work around dangling routes kernel issue

10 years agoFix source-restrictions of routes when no mask was provided
Steven Barth [Fri, 14 Feb 2014 20:09:05 +0000 (21:09 +0100)]
Fix source-restrictions of routes when no mask was provided

10 years agonetifd : Fix ubus route src mask printing
Hans Dedecker [Tue, 11 Feb 2014 08:31:24 +0000 (08:31 +0000)]
netifd : Fix ubus route src mask printing

Fix printing of route src mask attribute when it contains 3 digits

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd : Disable netlink auto ack
Hans Dedecker [Tue, 11 Feb 2014 08:29:36 +0000 (08:29 +0000)]
netifd : Disable netlink auto ack

Disable netlink auto ack when doing a delete in the get callback
handler to avoid race conditions resulting into stalled message
on the netlink socket.

Solves issue reported in https://dev.openwrt.org/ticket/14590

Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agoDon't add unnecessary NOP policy rules
Steven Barth [Mon, 20 Jan 2014 18:23:51 +0000 (19:23 +0100)]
Don't add unnecessary NOP policy rules

10 years agoRemove automatically assigned IPv6 routing table
Steven Barth [Thu, 16 Jan 2014 23:41:49 +0000 (00:41 +0100)]
Remove automatically assigned IPv6 routing table

This puts IPv6 routes back into the main table where they are expected.
Instead the newly-fixed source-address restrictions should be used.

10 years agoAdd indicator-flags to ubus and hotplug update-events
Steven Barth [Thu, 16 Jan 2014 23:39:40 +0000 (00:39 +0100)]
Add indicator-flags to ubus and hotplug update-events

10 years agowireless: fix alignment of wireless config structs - fixes segfaults on arm
Felix Fietkau [Sun, 29 Dec 2013 02:27:36 +0000 (03:27 +0100)]
wireless: fix alignment of wireless config structs - fixes segfaults on arm

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: cancel the script check timer
Felix Fietkau [Sat, 28 Dec 2013 14:20:56 +0000 (15:20 +0100)]
wireless: cancel the script check timer

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agodevice: prevent callbacks to device users that have been cleaned up already
Felix Fietkau [Mon, 16 Dec 2013 10:06:57 +0000 (11:06 +0100)]
device: prevent callbacks to device users that have been cleaned up already

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoRevert "netifd: Link layer state support on device level"
Felix Fietkau [Sat, 14 Dec 2013 14:51:13 +0000 (15:51 +0100)]
Revert "netifd: Link layer state support on device level"

This reverts commit c439b52400978dd3799c66e1f632ee68d2c7c9eb.

10 years agoRevert "netifd: Link layer state support on interface level"
Felix Fietkau [Sat, 14 Dec 2013 14:51:06 +0000 (15:51 +0100)]
Revert "netifd: Link layer state support on interface level"

This reverts commit 7335c3e19ea09674245dda3653d3f40705e68d6b.

10 years agoSet dynamic interface flag after adding them so the version is preserved
Steven Barth [Thu, 12 Dec 2013 13:43:39 +0000 (14:43 +0100)]
Set dynamic interface flag after adding them so the version is preserved

10 years agowireless: remove the no_delete flag, remove virtual interfaces from the avl tree
Felix Fietkau [Wed, 11 Dec 2013 18:21:35 +0000 (19:21 +0100)]
wireless: remove the no_delete flag, remove virtual interfaces from the avl tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix handling of wdev->config_state, prevent handling of multiple state...
Felix Fietkau [Wed, 11 Dec 2013 18:20:19 +0000 (19:20 +0100)]
wireless: fix handling of wdev->config_state, prevent handling of multiple state changes (reload + remove)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: remove freed wireless devices from the vlist avl tree
Felix Fietkau [Wed, 11 Dec 2013 18:19:11 +0000 (19:19 +0100)]
wireless: remove freed wireless devices from the vlist avl tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agoIPv6: Remove IPv6 source-routing workaround (kernel is fixed)
Steven Barth [Wed, 11 Dec 2013 09:54:37 +0000 (10:54 +0100)]
IPv6: Remove IPv6 source-routing workaround (kernel is fixed)

Signed-off-by: Steven Barth <steven@midlink.org>
10 years agowireless: add back support for multiple networks per interface
Felix Fietkau [Sun, 8 Dec 2013 17:57:40 +0000 (18:57 +0100)]
wireless: add back support for multiple networks per interface

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: Link layer state support on interface level
Hans Dedecker [Tue, 19 Nov 2013 11:17:09 +0000 (12:17 +0100)]
netifd: Link layer state support on interface level

Patch implements handling of link layer support on interface level.
An interface will go into the setup state when it's enabled and the
underlying link state is enabled. Vice versa an interface will go to
the down state when it's either disabled or underlying link state is
disabled.
Testing has been done with PPP, IPoE, tunnel and static interfaces

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Link layer state support on device level
Hans Dedecker [Tue, 19 Nov 2013 11:17:08 +0000 (12:17 +0100)]
netifd: Link layer state support on device level

Patch implements link layer state awareness (aka carrier detection) in
netifd on device level.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Code style line/clean up
Hans Dedecker [Tue, 19 Nov 2013 11:17:07 +0000 (12:17 +0100)]
netifd: Code style line/clean up

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agoTunnel don't fragment bit configurable
Hans Dedecker [Tue, 19 Nov 2013 11:17:06 +0000 (12:17 +0100)]
Tunnel don't fragment bit configurable

Make tunnel don't fragment bit configurable via UCI

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Apply tunnel MTU
Hans Dedecker [Tue, 19 Nov 2013 11:17:05 +0000 (12:17 +0100)]
netifd: Apply tunnel MTU

Tunnel MTU is applied according to the tunnel MTU UCI parameter

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Don't export default route via UBUS when disabled
Hans Dedecker [Tue, 19 Nov 2013 11:17:04 +0000 (12:17 +0100)]
netifd: Don't export default route via UBUS when disabled

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Export ip4table/ip6table via UBUS
Hans Dedecker [Tue, 19 Nov 2013 11:17:03 +0000 (12:17 +0100)]
netifd: Export ip4table/ip6table via UBUS

Export ip4table/ip6table parameters via UBUS to facilitate
route inspection and usage by other applications

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agonetifd: Routing table parameter needs to be checked in route update
Hans Dedecker [Tue, 19 Nov 2013 11:17:02 +0000 (12:17 +0100)]
netifd: Routing table parameter needs to be checked in route update

Routing table parameter needs to be checked in interface_update_proto_route; a route which
has an identical nexthop but a different routing table needs to be deleted and added in the
correct routing table.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 years agowireless: make interfaces in status an array instead of an object
Felix Fietkau [Tue, 3 Dec 2013 14:16:43 +0000 (15:16 +0100)]
wireless: make interfaces in status an array instead of an object

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: prepare bridge interfaces before passing them to the setup script
Felix Fietkau [Tue, 3 Dec 2013 14:14:30 +0000 (15:14 +0100)]
wireless: prepare bridge interfaces before passing them to the setup script

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add an example driver cleanup implementation
Felix Fietkau [Tue, 3 Dec 2013 14:14:05 +0000 (15:14 +0100)]
wireless: add an example driver cleanup implementation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix getting the network_bridge variable
Felix Fietkau [Mon, 2 Dec 2013 16:36:44 +0000 (17:36 +0100)]
wireless: fix getting the network_bridge variable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: only process setup retries in setup/up state
Felix Fietkau [Mon, 2 Dec 2013 15:42:45 +0000 (16:42 +0100)]
wireless: only process setup retries in setup/up state

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix htmode handling
Felix Fietkau [Mon, 2 Dec 2013 09:52:53 +0000 (10:52 +0100)]
wireless: fix htmode handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: call an initial cleanup function
Felix Fietkau [Mon, 2 Dec 2013 09:39:51 +0000 (10:39 +0100)]
wireless: call an initial cleanup function

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix reload of active interfaces
Felix Fietkau [Sun, 1 Dec 2013 22:47:47 +0000 (23:47 +0100)]
wireless: fix reload of active interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix issues with cancelling device setup
Felix Fietkau [Sun, 1 Dec 2013 21:00:28 +0000 (22:00 +0100)]
wireless: fix issues with cancelling device setup

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add another debug message
Felix Fietkau [Sun, 1 Dec 2013 20:57:06 +0000 (21:57 +0100)]
wireless: add another debug message

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix process handling if the pid exe is a symlink
Felix Fietkau [Sun, 1 Dec 2013 20:47:18 +0000 (21:47 +0100)]
wireless: fix process handling if the pid exe is a symlink

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix parsing of the immediate flag for kill-all
Felix Fietkau [Sun, 1 Dec 2013 13:42:51 +0000 (14:42 +0100)]
wireless: fix parsing of the immediate flag for kill-all

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add input validation for processes
Felix Fietkau [Sun, 1 Dec 2013 09:53:13 +0000 (10:53 +0100)]
wireless: add input validation for processes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agonetifd: fix process stdin/stdout/stderr when the pipe fds overlap with standard fds
Felix Fietkau [Sun, 1 Dec 2013 09:28:52 +0000 (10:28 +0100)]
netifd: fix process stdin/stdout/stderr when the pipe fds overlap with standard fds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix config state handling
Felix Fietkau [Sun, 1 Dec 2013 09:22:40 +0000 (10:22 +0100)]
wireless: fix config state handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add debug messages
Felix Fietkau [Sun, 1 Dec 2013 09:10:25 +0000 (10:10 +0100)]
wireless: add debug messages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: add some device/vif error debug messages
Felix Fietkau [Sat, 30 Nov 2013 18:46:12 +0000 (19:46 +0100)]
wireless: add some device/vif error debug messages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix channel check
Felix Fietkau [Sat, 30 Nov 2013 18:44:14 +0000 (19:44 +0100)]
wireless: fix channel check

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10 years agowireless: fix use-after-free bug
Felix Fietkau [Sat, 30 Nov 2013 17:17:55 +0000 (18:17 +0100)]
wireless: fix use-after-free bug

Signed-off-by: Felix Fietkau <nbd@openwrt.org>