-bgmac: make bgmac work on systems without nvram
+These are some hackish patches to make the Ethernet driver work somehow
+on this arm core.
+The flash driver is not working, so we removed the nvram reading, this
+should be changed after we have a flash driver.
+The mdelay(1) is a ugly workaround for this arm chip, this seams to be a dma problem.
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac.c | 4 ++++
- 1 file changed, 4 insertions(+)
+The PHY says it is not connected by default, just ignore it.
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
static const struct bcma_device_id bgmac_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
-@@ -1445,7 +1449,7 @@ static int bgmac_probe(struct bcma_devic
+@@ -165,6 +169,10 @@ static netdev_tx_t bgmac_dma_tx_add(stru
+
+ netdev_sent_queue(net_dev, skb->len);
+
++ if (bgmac->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
++ bgmac->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018)
++ mdelay(1);
++
+ wmb();
+
+ /* Increase ring->end to point empty slot. We tell hardware the first
+@@ -1438,7 +1446,7 @@ static int bgmac_probe(struct bcma_devic
int err;
/* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
pr_err("Unsupported core_unit %d\n", core->core_unit);
return -ENOTSUPP;
}
-@@ -1541,8 +1545,7 @@ static int bgmac_probe(struct bcma_devic
+@@ -1534,8 +1542,7 @@ static int bgmac_probe(struct bcma_devic
/* TODO: reset the external phy. Specs are needed */
bgmac_phy_reset(bgmac);
if (bgmac->has_robosw)
bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -814,7 +814,7 @@ int genphy_update_link(struct phy_device
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+- phydev->link = 0;
++ phydev->link = 1;
+ else
+ phydev->link = 1;
+
+++ /dev/null
-From 88d0993dbe84a9b88212a4845fca28bf4c919ffb Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 26 Nov 2013 23:59:32 +0100
-Subject: [PATCH 14/16] bgmac: stuff
-
----
- drivers/net/ethernet/broadcom/bgmac.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -123,6 +123,7 @@ static netdev_tx_t bgmac_dma_tx_add(stru
- struct net_device *net_dev = bgmac->net_dev;
- struct bgmac_dma_desc *dma_desc;
- struct bgmac_slot_info *slot;
-+ int size = ring->num_slots * sizeof(struct bgmac_dma_desc);
- u32 ctl0, ctl1;
- int free_slots;
-
-@@ -163,6 +164,8 @@ static netdev_tx_t bgmac_dma_tx_add(stru
- dma_desc->ctl0 = cpu_to_le32(ctl0);
- dma_desc->ctl1 = cpu_to_le32(ctl1);
-
-+ dma_sync_single_for_device(dma_dev, ring->dma_base, size, DMA_TO_DEVICE);
-+
- netdev_sent_queue(net_dev, skb->len);
-
- wmb();
-@@ -313,6 +316,8 @@ static void bgmac_dma_rx_setup_desc(stru
- struct bgmac_dma_ring *ring, int desc_idx)
- {
- struct bgmac_dma_desc *dma_desc = ring->cpu_base + desc_idx;
-+ struct device *dma_dev = bgmac->core->dma_dev;
-+ int size = ring->num_slots * sizeof(struct bgmac_dma_desc);
- u32 ctl0 = 0, ctl1 = 0;
-
- if (desc_idx == ring->num_slots - 1)
-@@ -327,6 +332,8 @@ static void bgmac_dma_rx_setup_desc(stru
- dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[desc_idx].dma_addr));
- dma_desc->ctl0 = cpu_to_le32(ctl0);
- dma_desc->ctl1 = cpu_to_le32(ctl1);
-+
-+ dma_sync_single_for_device(dma_dev, ring->dma_base, size, DMA_TO_DEVICE);
- }
-
- static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,