ar71xx: allow to use LAN LED on the TL-WA901N/ND boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index afa9abb..f3b67a3 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -145,6 +145,10 @@ tl-mr3420 )
        set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
        ;;
 
+tl-wa901nd)
+       set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+       ;;
+
 tl-wr741nd)
        set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
        set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c
index 7bc666a..056f35a 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c
@@ -20,6 +20,7 @@
 
 #define TL_WA901ND_GPIO_LED_QSS                0
 #define TL_WA901ND_GPIO_LED_SYSTEM     1
+#define TL_WA901ND_GPIO_LED_LAN                13
 
 #define TL_WA901ND_GPIO_BTN_RESET      11
 #define TL_WA901ND_GPIO_BTN_QSS                12
@@ -38,6 +39,10 @@ static struct flash_platform_data tl_wa901nd_flash_data = {
 
 static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
        {
+               .name           = "tp-link:green:lan",
+               .gpio           = TL_WA901ND_GPIO_LED_LAN,
+               .active_low     = 1,
+       }, {
                .name           = "tp-link:green:system",
                .gpio           = TL_WA901ND_GPIO_LED_SYSTEM,
                .active_low     = 1,
@@ -71,6 +76,12 @@ static void __init tl_wa901nd_setup(void)
        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
        u8 *ee  = (u8 *) KSEG1ADDR(0x1fff1000);
 
+       ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
        /*
         * ar71xx_eth0 would be the WAN port, but is not connected on
         * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,