ar71xx: move gpio-buttons support into a spearate file

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18937 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30
index 1c01155..b01fb42 100644 (file)
--- a/target/linux/ar71xx/config-2.6.30
+++ b/target/linux/ar71xx/config-2.6.30
@@ -6,6 +6,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 CONFIG_AR71XX_DEV_AP91_PCI=y
 CONFIG_AR71XX_DEV_AP94_PCI=y
 CONFIG_AR71XX_DEV_AR913X_WMAC=y
+CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
 CONFIG_AR71XX_DEV_LEDS_GPIO=y
 CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_DEV_PB42_PCI=y

diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31
index 5b6bb57..afcb93a 100644 (file)
--- a/target/linux/ar71xx/config-2.6.31
+++ b/target/linux/ar71xx/config-2.6.31
@@ -8,6 +8,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 CONFIG_AR71XX_DEV_AP91_PCI=y
 CONFIG_AR71XX_DEV_AP94_PCI=y
 CONFIG_AR71XX_DEV_AR913X_WMAC=y
+CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
 CONFIG_AR71XX_DEV_LEDS_GPIO=y
 CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_DEV_PB42_PCI=y

diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32
index 1b6b3b0..d391571 100644 (file)
--- a/target/linux/ar71xx/config-2.6.32
+++ b/target/linux/ar71xx/config-2.6.32
@@ -8,6 +8,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 CONFIG_AR71XX_DEV_AP91_PCI=y
 CONFIG_AR71XX_DEV_AP94_PCI=y
 CONFIG_AR71XX_DEV_AR913X_WMAC=y
+CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
 CONFIG_AR71XX_DEV_LEDS_GPIO=y
 CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_DEV_PB42_PCI=y

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
index 08d0397..fe9b7a7 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
@@ -6,12 +6,14 @@ config AR71XX_MACH_AP81
        bool "Atheros AP81 board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
 config AR71XX_MACH_AP83
        bool "Atheros AP83 board support"
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -19,6 +21,7 @@ config AR71XX_MACH_DIR_615_C1
        bool "D-Link DIR-615 rev. C1 support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -26,17 +29,20 @@ config AR71XX_MACH_DIR_825_B1
        bool "D-Link DIR-825 rev. B1 board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AP94_PCI if PCI
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
 config AR71XX_MACH_PB42
        bool "Atheros PB42 board support"
        select AR71XX_DEV_M25P80
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_PB42_PCI if PCI
        default y
 
 config AR71XX_MACH_PB44
        bool "Atheros PB44 board support"
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_PB42_PCI if PCI
        select AR71XX_DEV_LEDS_GPIO
        default y
@@ -44,6 +50,7 @@ config AR71XX_MACH_PB44
 config AR71XX_MACH_AW_NR580
        bool "AzureWave AW-NR580 board support"
        select AR71XX_DEV_M25P80
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_PB42_PCI if PCI
        select AR71XX_DEV_LEDS_GPIO
        default y
@@ -56,6 +63,7 @@ config AR71XX_MACH_WP543
        bool "Compex WP543/WPJ543 board support"
        select MYLOADER
        select AR71XX_DEV_M25P80
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_PB42_PCI if PCI
        select AR71XX_DEV_LEDS_GPIO
        default y
@@ -64,17 +72,20 @@ config AR71XX_MACH_WRT160NL
        bool "Linksys WRT160NL board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
 config AR71XX_MACH_WRT400N
        bool "Linksys WRT400N board support"
        select AR71XX_DEV_M25P80
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
 config AR71XX_MACH_RB_4XX
        bool "MikroTik RouterBOARD 4xx series support"
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -82,6 +93,7 @@ config AR71XX_MACH_WNDR3700
        bool "NETGEAR WNDR3700 board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AP94_PCI if PCI
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -89,6 +101,7 @@ config AR71XX_MACH_WNR2000
        bool "NETGEAR WNR2000 board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -96,6 +109,7 @@ config AR71XX_MACH_MZK_W04NU
        bool "Planex MZK-W04NU board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -103,6 +117,7 @@ config AR71XX_MACH_MZK_W300NH
        bool "Planex MZK-W300NH board support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -110,6 +125,7 @@ config AR71XX_MACH_TL_WR741ND
        bool "TP-LINK TL-WR741ND support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AP91_PCI if PCI
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -117,6 +133,7 @@ config AR71XX_MACH_TL_WR841N_V1
        bool "TP-LINK TL-WR841N v1 support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_PB42_PCI if PCI
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -124,6 +141,7 @@ config AR71XX_MACH_TL_WR941ND
        bool "TP-LINK TL-WR941ND support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -131,6 +149,7 @@ config AR71XX_MACH_TL_WR1043ND
        bool "TP-LINK TL-WR1043ND support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -138,6 +157,7 @@ config AR71XX_MACH_TEW_632BRP
        bool "TRENDnet TEW-632BRP support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AR913X_WMAC
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        default y
 
@@ -145,6 +165,7 @@ config AR71XX_MACH_UBNT
        bool "Ubiquiti AR71xx based boards support"
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_AP91_PCI if PCI
+       select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
        select AR71XX_DEV_PB42_PCI if PCI
        default y
@@ -163,6 +184,9 @@ config AR71XX_DEV_AP94_PCI
 config AR71XX_DEV_AR913X_WMAC
        def_bool n
 
+config AR71XX_DEV_GPIO_BUTTONS
+       def_bool n
+
 config AR71XX_DEV_LEDS_GPIO
        def_bool n
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
index fee95bd..962af4b 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI)                     += pci.o
 obj-$(CONFIG_AR71XX_DEV_AP91_PCI)      += dev-ap91-pci.o
 obj-$(CONFIG_AR71XX_DEV_AP94_PCI)      += dev-ap94-pci.o
 obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC)   += dev-ar913x-wmac.o
+obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS)  += dev-gpio-buttons.o
 obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO)     += dev-leds-gpio.o
 obj-$(CONFIG_AR71XX_DEV_M25P80)                += dev-m25p80.o
 obj-$(CONFIG_AR71XX_DEV_PB42_PCI)      += dev-pb42-pci.o

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/dev-gpio-buttons.c b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-gpio-buttons.c
new file mode 100644 (file)
index 0000000..df7416d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-gpio-buttons.c
@@ -0,0 +1,58 @@
+/*
+ *  Atheros AR71xx GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "linux/init.h"
+#include <linux/platform_device.h>
+
+#include "dev-gpio-buttons.h"
+
+void __init ar71xx_add_device_gpio_buttons(int id,
+                                          unsigned poll_interval,
+                                          unsigned nbuttons,
+                                          struct gpio_button *buttons)
+{
+       struct platform_device *pdev;
+       struct gpio_buttons_platform_data pdata;
+       struct gpio_button *p;
+       int err;
+
+       p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
+       if (!p)
+               return;
+
+       memcpy(p, buttons, nbuttons * sizeof(*p));
+
+       pdev = platform_device_alloc("gpio-buttons", id);
+       if (!pdev)
+               goto err_free_buttons;
+
+       memset(&pdata, 0, sizeof(pdata));
+       pdata.poll_interval = poll_interval;
+       pdata.nbuttons = nbuttons;
+       pdata.buttons = p;
+
+       err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+       if (err)
+               goto err_put_pdev;
+
+
+       err = platform_device_add(pdev);
+       if (err)
+               goto err_put_pdev;
+
+       return;
+
+err_put_pdev:
+       platform_device_put(pdev);
+
+err_free_buttons:
+       kfree(p);
+}

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/dev-gpio-buttons.h b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-gpio-buttons.h
new file mode 100644 (file)
index 0000000..97e9fe5
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-gpio-buttons.h
@@ -0,0 +1,25 @@
+/*
+ *  Atheros AR71xx GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_GPIO_BUTTONS_H
+#define _AR71XX_DEV_GPIO_BUTTONS_H
+
+#include <linux/input.h>
+#include <linux/gpio_buttons.h>
+
+#include <asm/mach-ar71xx/platform.h>
+
+void ar71xx_add_device_gpio_buttons(int id,
+                                   unsigned poll_interval,
+                                   unsigned nbuttons,
+                                   struct gpio_button *buttons) __init;
+
+#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/devices.c b/target/linux/ar71xx/files/arch/mips/ar71xx/devices.c
index e2e08bb..5c29f80 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/devices.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/devices.c
@@ -665,49 +665,6 @@ void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
        platform_device_register(&ar71xx_spi_device);
 }
 
-void __init ar71xx_add_device_gpio_buttons(int id,
-                                          unsigned poll_interval,
-                                          unsigned nbuttons,
-                                          struct gpio_button *buttons)
-{
-       struct platform_device *pdev;
-       struct gpio_buttons_platform_data pdata;
-       struct gpio_button *p;
-       int err;
-
-       p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
-       if (!p)
-               return;
-
-       memcpy(p, buttons, nbuttons * sizeof(*p));
-
-       pdev = platform_device_alloc("gpio-buttons", id);
-       if (!pdev)
-               goto err_free_buttons;
-
-       memset(&pdata, 0, sizeof(pdata));
-       pdata.poll_interval = poll_interval;
-       pdata.nbuttons = nbuttons;
-       pdata.buttons = p;
-
-       err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-       if (err)
-               goto err_put_pdev;
-
-
-       err = platform_device_add(pdev);
-       if (err)
-               goto err_put_pdev;
-
-       return;
-
-err_put_pdev:
-       platform_device_put(pdev);
-
-err_free_buttons:
-       kfree(p);
-}
-
 void __init ar71xx_add_device_wdt(void)
 {
        platform_device_register_simple("ar71xx-wdt", -1, NULL, 0);

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/devices.h b/target/linux/ar71xx/files/arch/mips/ar71xx/devices.h
index 3e4eaeb..c15f229 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/devices.h
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/devices.h
@@ -14,7 +14,6 @@
 
 #include <asm/mach-ar71xx/platform.h>
 
-#include <linux/gpio_buttons.h>
 #include <net/dsa.h>
 
 void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
@@ -39,11 +38,6 @@ void ar71xx_add_device_eth(unsigned int id) __init;
 
 void ar71xx_add_device_mdio(u32 phy_mask) __init;
 
-void ar71xx_add_device_gpio_buttons(int id,
-                                   unsigned poll_interval,
-                                   unsigned nbuttons,
-                                   struct gpio_button *buttons) __init;
-
 void ar71xx_add_device_usb(void) __init;
 void ar71xx_add_device_uart(void) __init;
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
index 0b234cd..5790dc8 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
@@ -12,7 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -20,6 +19,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define AP81_GPIO_LED_STATUS   1

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
index a9bb2bf..93072a3 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
@@ -11,7 +11,6 @@
 
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/input.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -24,6 +23,7 @@
 
 #include "devices.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define AP83_GPIO_LED_WLAN     6
@@ -37,6 +37,8 @@
 #define AP83_050_GPIO_VSC7385_MOSI     16
 #define AP83_050_GPIO_VSC7385_SCK      17
 
+#define AP83_BUTTONS_POLL_INTERVAL     20
+
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition ap83_flash_partitions[] = {
        {
@@ -214,7 +216,8 @@ static void __init ap83_generic_setup(void)
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
                                        ap83_leds_gpio);
 
-       ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
+       ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap83_gpio_buttons),
                                        ap83_gpio_buttons);
 
        ar71xx_add_device_usb();

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
index 9e17e3f..813081e 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
@@ -12,13 +12,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
 #include "dev-pb42-pci.h"
 #include "dev-leds-gpio.h"
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c
index d9bd285..9f18bde 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c
@@ -12,7 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -20,6 +19,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define DIR_615C1_GPIO_LED_ORANGE_STATUS 1     /* ORANGE:STATUS:TRICOLOR */

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
index 7321071..338110d 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
@@ -13,7 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/rtl8366_smi.h>
 
@@ -23,6 +22,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define DIR825B1_GPIO_LED_BLUE_USB             0

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
index 7e8f0b5..a3d71f6 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
@@ -13,13 +13,13 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define MZK_W04NU_GPIO_LED_USB         0

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
index 24b05b3..bf72ccb 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
@@ -12,7 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -20,6 +19,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define MZK_W300NH_GPIO_LED_STATUS     1

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb42.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb42.c
index 6e85155..643d7c2 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb42.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb42.c
@@ -11,7 +11,6 @@
 
 #include <linux/init.h>
 #include <linux/bitops.h>
-#include <linux/input.h>
 #include <linux/platform_device.h>
 
 #include <asm/mips_machine.h>
@@ -19,6 +18,7 @@
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
 #include "dev-pb42-pci.h"
 
 #define PB42_BUTTONS_POLL_INTERVAL     20

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb44.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb44.c
index c8a0c6d..011c05f 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb44.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb44.c
@@ -10,7 +10,6 @@
 
 #include <linux/init.h>
 #include <linux/bitops.h>
-#include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
@@ -25,6 +24,7 @@
 
 #include "devices.h"
 #include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define PB44_PCF8757_VSC7395_CS        0

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c
index 69e25ce..164ddcc 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c
@@ -15,13 +15,13 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/mmc_spi.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define RB4XX_GPIO_USER_LED    4

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c
index fd8f67a..190070d 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c
@@ -12,7 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -20,6 +19,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define TEW_632BRP_GPIO_LED_STATUS     1

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
index 1dc61c7..f36d360 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
@@ -11,15 +11,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
-
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define TL_WR1043ND_GPIO_LED_USB        1

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
index 4273f2a..2b72946 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
@@ -11,15 +11,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
-
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define TL_WR741ND_GPIO_LED_QSS                0

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr841n.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr841n.c
index 459cfa5..54ff549 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr841n.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr841n.c
@@ -11,13 +11,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
 #include "dev-pb42-pci.h"
 #include "dev-leds-gpio.h"
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c
index 4bd4a9a..6bc0d71 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c
@@ -11,7 +11,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -19,6 +18,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define TL_WR941ND_GPIO_LED_SYSTEM     2

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
index d83b283..5ad5994 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
@@ -12,7 +12,6 @@
 
 #include <linux/pci.h>
 #include <linux/platform_device.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -20,6 +19,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
 #include "dev-pb42-pci.h"
 #include "dev-leds-gpio.h"
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
index e50235b..befeeda 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
@@ -12,7 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/rtl8366_smi.h>
 
@@ -22,6 +21,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define WNDR3700_GPIO_LED_WPS_ORANGE   0

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
index 73e8982..8b75323 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
@@ -13,15 +13,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
-
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define WNR2000_GPIO_LED_PWR_GREEN     14

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
index 15e4278..9fd02d4 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
@@ -12,7 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -21,6 +20,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define WP543_GPIO_SW6         2

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
index 571fe1d..1d4b25f 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
@@ -11,7 +11,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -19,6 +18,7 @@
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define WRT160NL_GPIO_LED_POWER                14

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt400n.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt400n.c
index bd6fdb2..28e1642 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt400n.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt400n.c
@@ -12,13 +12,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
 #define WRT400N_GPIO_LED_ORANGE        5