-diff -Nur linux-2.4.29/arch/i386/kernel/acpi.c linux-mips/arch/i386/kernel/acpi.c
---- linux-2.4.29/arch/i386/kernel/acpi.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/arch/i386/kernel/acpi.c 2005-03-26 11:47:12.638577463 +0100
-@@ -55,6 +55,7 @@
-
- acpi_interrupt_flags acpi_sci_flags __initdata;
- int acpi_sci_override_gsi __initdata;
-+int acpi_skip_timer_override __initdata;
- /* --------------------------------------------------------------------------
- Boot-time Configuration
- -------------------------------------------------------------------------- */
-@@ -320,6 +321,12 @@
- return 0;
- }
-
-+ if (acpi_skip_timer_override &&
-+ intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
-+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
-+ return 0;
-+ }
-+
- mp_override_legacy_irq (
- intsrc->bus_irq,
- intsrc->flags.polarity,
-@@ -433,6 +440,10 @@
- return result;
- }
-
-+#ifdef CONFIG_X86_IOAPIC
-+ check_acpi_pci();
-+#endif
-+
- result = acpi_blacklisted();
- if (result) {
- printk(KERN_NOTICE PREFIX "BIOS listed in blacklist, disabling ACPI support\n");
-diff -Nur linux-2.4.29/arch/i386/kernel/earlyquirk.c linux-mips/arch/i386/kernel/earlyquirk.c
---- linux-2.4.29/arch/i386/kernel/earlyquirk.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/arch/i386/kernel/earlyquirk.c 2005-03-18 13:13:20.000000000 +0100
-@@ -0,0 +1,53 @@
-+/*
-+ * Do early PCI probing for bug detection when the main PCI subsystem is
-+ * not up yet.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <asm/pci-direct.h>
-+#include <asm/acpi.h>
-+
-+#ifdef CONFIG_ACPI
-+static int __init check_bridge(int vendor, int device)
-+{
-+ /* According to Nvidia all timer overrides are bogus. Just ignore
-+ them all. */
-+ if (vendor == PCI_VENDOR_ID_NVIDIA) {
-+ acpi_skip_timer_override = 1;
-+ }
-+ return 0;
-+}
-+
-+void __init check_acpi_pci(void)
-+{
-+ int num,slot,func;
-+
-+ /* Assume the machine supports type 1. If not it will
-+ always read ffffffff and should not have any side effect. */
-+
-+ /* Poor man's PCI discovery */
-+ for (num = 0; num < 32; num++) {
-+ for (slot = 0; slot < 32; slot++) {
-+ for (func = 0; func < 8; func++) {
-+ u32 class;
-+ u32 vendor;
-+ class = read_pci_config(num,slot,func,
-+ PCI_CLASS_REVISION);
-+ if (class == 0xffffffff)
-+ break;
-+
-+ if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
-+ continue;
-+
-+ vendor = read_pci_config(num, slot, func,
-+ PCI_VENDOR_ID);
-+
-+ if (check_bridge(vendor&0xffff, vendor >> 16))
-+ return;
-+ }
-+
-+ }
-+ }
-+}
-+#endif /* CONFIG_ACPI */
-diff -Nur linux-2.4.29/arch/i386/kernel/Makefile linux-mips/arch/i386/kernel/Makefile
---- linux-2.4.29/arch/i386/kernel/Makefile 2003-11-28 19:26:19.000000000 +0100
-+++ linux-mips/arch/i386/kernel/Makefile 2005-03-26 11:47:12.567589113 +0100
-@@ -40,7 +40,7 @@
- obj-$(CONFIG_ACPI_SLEEP) += acpi_wakeup.o
- obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o
- obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o apic.o nmi.o
--obj-$(CONFIG_X86_IO_APIC) += io_apic.o
-+obj-$(CONFIG_X86_IO_APIC) += io_apic.o earlyquirk.o
- obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
- obj-$(CONFIG_EDD) += edd.o
-
-diff -Nur linux-2.4.29/arch/i386/kernel/pci-irq.c linux-mips/arch/i386/kernel/pci-irq.c
---- linux-2.4.29/arch/i386/kernel/pci-irq.c 2005-01-19 15:09:25.000000000 +0100
-+++ linux-mips/arch/i386/kernel/pci-irq.c 2005-03-26 11:47:12.808549566 +0100
-@@ -1120,13 +1120,15 @@
- void pcibios_enable_irq(struct pci_dev *dev)
- {
- u8 pin;
-- extern int interrupt_line_quirk;
-+ extern int via_interrupt_line_quirk;
- struct pci_dev *temp_dev;
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
- char *msg;
-
-+ pin--; /* interrupt pins are numbered starting from 1 */
-+
- /* With IDE legacy devices the IRQ lookup failure is not a problem.. */
- if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
- return;
-@@ -1134,46 +1136,43 @@
- if (io_apic_assign_pci_irqs) {
- int irq;
-
-- if (pin) {
-- pin--; /* interrupt pins are numbered starting from 1 */
-- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
-- /*
-- * Busses behind bridges are typically not listed in the MP-table.
-- * In this case we have to look up the IRQ based on the parent bus,
-- * parent slot, and pin number. The SMP code detects such bridged
-- * busses itself so we should get into this branch reliably.
-- */
-- temp_dev = dev;
-- while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-- struct pci_dev * bridge = dev->bus->self;
-+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
-+ /*
-+ * Busses behind bridges are typically not listed in the MP-table.
-+ * In this case we have to look up the IRQ based on the parent bus,
-+ * parent slot, and pin number. The SMP code detects such bridged
-+ * busses itself so we should get into this branch reliably.
-+ */
-+ temp_dev = dev;
-+ while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
-+ struct pci_dev * bridge = dev->bus->self;
-
-- pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
-- PCI_SLOT(bridge->devfn), pin);
-- if (irq >= 0)
-- printk(KERN_WARNING "PCI: using PPB(B%d,I%d,P%d) to get irq %d\n",
-- bridge->bus->number, PCI_SLOT(bridge->devfn), pin, irq);
-- dev = bridge;
-- }
-- dev = temp_dev;
-- if (irq >= 0) {
-- printk(KERN_INFO "PCI->APIC IRQ transform: (B%d,I%d,P%d) -> %d\n",
-- dev->bus->number, PCI_SLOT(dev->devfn), pin, irq);
-- dev->irq = irq;
-- return;
-- } else
-- msg = " Probably buggy MP table.";
-+ pin = (pin + PCI_SLOT(dev->devfn)) % 4;
-+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
-+ PCI_SLOT(bridge->devfn), pin);
-+ if (irq >= 0)
-+ printk(KERN_WARNING "PCI: using PPB(B%d,I%d,P%d) to get irq %d\n",
-+ bridge->bus->number, PCI_SLOT(bridge->devfn), pin, irq);
-+ dev = bridge;
- }
-+ dev = temp_dev;
-+ if (irq >= 0) {
-+ printk(KERN_INFO "PCI->APIC IRQ transform: (B%d,I%d,P%d) -> %d\n",
-+ dev->bus->number, PCI_SLOT(dev->devfn), pin, irq);
-+ dev->irq = irq;
-+ return;
-+ } else
-+ msg = " Probably buggy MP table.";
- } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
- msg = "";
- else
- msg = " Please try using pci=biosirq.";
- printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-- 'A' + pin - 1, dev->slot_name, msg);
-+ 'A' + pin, dev->slot_name, msg);
- }
- /* VIA bridges use interrupt line for apic/pci steering across
- the V-Link */
-- else if (interrupt_line_quirk)
-+ else if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
-
- }
-diff -Nur linux-2.4.29/arch/i386/kernel/setup.c linux-mips/arch/i386/kernel/setup.c
---- linux-2.4.29/arch/i386/kernel/setup.c 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/arch/i386/kernel/setup.c 2005-03-26 11:47:12.810549238 +0100
-@@ -354,7 +354,8 @@
- struct resource standard_io_resources[] = {
- { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
- { "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
-- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
-+ { "timer0", 0x40, 0x43, IORESOURCE_BUSY },
-+ { "timer1", 0x50, 0x53, IORESOURCE_BUSY },
- { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
- { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
- { "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
-diff -Nur linux-2.4.29/arch/i386/lib/usercopy.c linux-mips/arch/i386/lib/usercopy.c
---- linux-2.4.29/arch/i386/lib/usercopy.c 2003-06-13 16:51:29.000000000 +0200
-+++ linux-mips/arch/i386/lib/usercopy.c 2005-03-26 11:47:12.859541197 +0100
-@@ -14,6 +14,7 @@
- unsigned long
- __generic_copy_to_user(void *to, const void *from, unsigned long n)
- {
-+ BUG_ON((long) n < 0);
- if (access_ok(VERIFY_WRITE, to, n))
- {
- if(n<512)
-@@ -27,6 +28,7 @@
- unsigned long
- __generic_copy_from_user(void *to, const void *from, unsigned long n)
- {
-+ BUG_ON((long) n < 0);
- if (access_ok(VERIFY_READ, from, n))
- {
- if(n<512)
-@@ -44,6 +46,7 @@
- unsigned long
- __generic_copy_to_user(void *to, const void *from, unsigned long n)
- {
-+ BUG_ON((long) n < 0);
- prefetch(from);
- if (access_ok(VERIFY_WRITE, to, n))
- __copy_user(to,from,n);
-@@ -53,6 +56,7 @@
- unsigned long
- __generic_copy_from_user(void *to, const void *from, unsigned long n)
- {
-+ BUG_ON((long) n < 0);
- prefetchw(to);
- if (access_ok(VERIFY_READ, from, n))
- __copy_user_zeroing(to,from,n);
-diff -Nur linux-2.4.29/arch/ia64/ia32/sys_ia32.c linux-mips/arch/ia64/ia32/sys_ia32.c
---- linux-2.4.29/arch/ia64/ia32/sys_ia32.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/ia64/ia32/sys_ia32.c 2005-03-26 11:47:12.934528890 +0100
-@@ -1649,7 +1649,8 @@
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
- static void
--cmsg32_recvmsg_fixup (struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+cmsg32_recvmsg_fixup (struct msghdr *kmsg, unsigned long orig_cmsg_uptr,
-+ __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -1683,6 +1684,9 @@
- goto fail2;
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- copy_from_user(CMSG32_DATA(kcmsg32), CMSG_DATA(ucmsg),
- clen64 - CMSG_ALIGN(sizeof(*ucmsg)));
- clen32 = ((clen64 - CMSG_ALIGN(sizeof(*ucmsg))) +
-@@ -1812,6 +1816,7 @@
- struct iovec *iov=iovstack;
- struct msghdr msg_sys;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, iov_size, total_len, len;
- struct scm_cookie scm;
-
-@@ -1856,6 +1861,7 @@
- total_len=err;
-
- cmsg_ptr = (unsigned long)msg_sys.msg_control;
-+ cmsg_len = msg_sys.msg_controllen;
- msg_sys.msg_flags = 0;
-
- if (sock->file->f_flags & O_NONBLOCK)
-@@ -1882,7 +1888,8 @@
- * fix it up before we tack on more stuff.
- */
- if ((unsigned long) msg_sys.msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(&msg_sys, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(&msg_sys, cmsg_ptr,
-+ cmsg_len);
-
- /* Wheee... */
- if (sock->passcred)
diff -Nur linux-2.4.29/arch/mips/au1000/common/au1xxx_irqmap.c linux-mips/arch/mips/au1000/common/au1xxx_irqmap.c
--- linux-2.4.29/arch/mips/au1000/common/au1xxx_irqmap.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/au1xxx_irqmap.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/common/au1xxx_irqmap.c 2005-01-30 09:01:27.000000000 +0100
@@ -172,14 +172,14 @@
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
diff -Nur linux-2.4.29/arch/mips/au1000/common/cputable.c linux-mips/arch/mips/au1000/common/cputable.c
--- linux-2.4.29/arch/mips/au1000/common/cputable.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/cputable.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/common/cputable.c 2005-01-30 09:01:27.000000000 +0100
@@ -39,7 +39,8 @@
{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
diff -Nur linux-2.4.29/arch/mips/au1000/common/dbdma.c linux-mips/arch/mips/au1000/common/dbdma.c
--- linux-2.4.29/arch/mips/au1000/common/dbdma.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/dbdma.c 2005-03-26 11:47:17.214826394 +0100
++++ linux-mips/arch/mips/au1000/common/dbdma.c 2005-02-08 07:28:37.000000000 +0100
@@ -41,6 +41,8 @@
#include <asm/au1xxx_dbdma.h>
#include <asm/system.h>
+EXPORT_SYMBOL(au1xxx_gpio_read);
diff -Nur linux-2.4.29/arch/mips/au1000/common/irq.c linux-mips/arch/mips/au1000/common/irq.c
--- linux-2.4.29/arch/mips/au1000/common/irq.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/irq.c 2005-03-26 11:47:17.215826230 +0100
++++ linux-mips/arch/mips/au1000/common/irq.c 2005-03-13 08:56:57.000000000 +0100
@@ -303,8 +303,30 @@
};
diff -Nur linux-2.4.29/arch/mips/au1000/common/Makefile linux-mips/arch/mips/au1000/common/Makefile
--- linux-2.4.29/arch/mips/au1000/common/Makefile 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/Makefile 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/common/Makefile 2005-01-30 09:01:27.000000000 +0100
@@ -19,9 +19,9 @@
export-objs = prom.o clocks.o power.o usbdev.o
diff -Nur linux-2.4.29/arch/mips/au1000/common/pci_ops.c linux-mips/arch/mips/au1000/common/pci_ops.c
--- linux-2.4.29/arch/mips/au1000/common/pci_ops.c 2004-02-18 14:36:30.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/pci_ops.c 2005-03-26 11:47:17.258819174 +0100
++++ linux-mips/arch/mips/au1000/common/pci_ops.c 2005-02-27 23:14:24.000000000 +0100
@@ -162,6 +162,7 @@
static int config_access(unsigned char access_type, struct pci_dev *dev,
unsigned char where, u32 * data)
diff -Nur linux-2.4.29/arch/mips/au1000/common/power.c linux-mips/arch/mips/au1000/common/power.c
--- linux-2.4.29/arch/mips/au1000/common/power.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/power.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/common/power.c 2005-01-30 09:01:27.000000000 +0100
@@ -50,7 +50,6 @@
static void calibrate_delay(void);
diff -Nur linux-2.4.29/arch/mips/au1000/common/reset.c linux-mips/arch/mips/au1000/common/reset.c
--- linux-2.4.29/arch/mips/au1000/common/reset.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/reset.c 2005-03-26 11:47:17.264818189 +0100
-@@ -37,8 +37,6 @@
- #include <asm/system.h>
- #include <asm/au1000.h>
-
--extern int au_sleep(void);
--
- void au1000_restart(char *command)
- {
- /* Set all integrated peripherals to disabled states */
-@@ -144,6 +142,26 @@
++++ linux-mips/arch/mips/au1000/common/reset.c 2005-02-27 23:11:54.000000000 +0100
+@@ -144,6 +144,26 @@
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
default:
break;
-@@ -163,32 +181,23 @@
-
- void au1000_halt(void)
- {
--#if defined(CONFIG_MIPS_PB1550)
-- /* power off system */
-- printk("\n** Powering off Pb1550\n");
-- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
-- au_sync();
-- while(1); /* should not get here */
--#endif
-- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
--#ifdef CONFIG_MIPS_MIRAGE
-- au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
--#endif
--#ifdef CONFIG_PM
-- au_sleep();
--
-- /* should not get here */
-- printk(KERN_ERR "Unable to put cpu in sleep mode\n");
-- while(1);
--#else
-- while (1)
-+ /* Use WAIT in a low-power infinite spin loop */
-+ while (1) {
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
--#endif
-+ }
- }
-
- void au1000_power_off(void)
- {
-+ extern void board_power_off (void);
-+
-+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-+
-+ /* Give board a chance to power-off */
-+ board_power_off();
-+
-+ /* If board can't power-off, spin forever */
- au1000_halt();
- }
diff -Nur linux-2.4.29/arch/mips/au1000/common/setup.c linux-mips/arch/mips/au1000/common/setup.c
--- linux-2.4.29/arch/mips/au1000/common/setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/setup.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/common/setup.c 2005-01-30 09:01:27.000000000 +0100
@@ -174,6 +174,40 @@
initrd_end = (unsigned long)&__rd_end;
#endif
#endif
diff -Nur linux-2.4.29/arch/mips/au1000/common/sleeper.S linux-mips/arch/mips/au1000/common/sleeper.S
--- linux-2.4.29/arch/mips/au1000/common/sleeper.S 2004-02-18 14:36:30.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/sleeper.S 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/common/sleeper.S 2005-01-30 09:01:27.000000000 +0100
@@ -15,17 +15,48 @@
#include <asm/addrspace.h>
#include <asm/regdef.h>
+
diff -Nur linux-2.4.29/arch/mips/au1000/common/time.c linux-mips/arch/mips/au1000/common/time.c
--- linux-2.4.29/arch/mips/au1000/common/time.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/common/time.c 2005-03-26 11:47:17.265818025 +0100
++++ linux-mips/arch/mips/au1000/common/time.c 2005-03-13 08:56:57.000000000 +0100
@@ -50,7 +50,6 @@
#include <linux/mc146818rtc.h>
#include <linux/timex.h>
diff -Nur linux-2.4.29/arch/mips/au1000/db1x00/board_setup.c linux-mips/arch/mips/au1000/db1x00/board_setup.c
--- linux-2.4.29/arch/mips/au1000/db1x00/board_setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/db1x00/board_setup.c 2005-03-26 11:47:17.271817041 +0100
++++ linux-mips/arch/mips/au1000/db1x00/board_setup.c 2005-01-30 09:06:19.000000000 +0100
@@ -46,10 +46,22 @@
#include <asm/au1000.h>
#include <asm/db1x00.h>
void board_reset (void)
{
-@@ -57,6 +69,13 @@
- au_writel(0x00000000, 0xAE00001C);
- }
-
-+void board_power_off (void)
-+{
-+#ifdef CONFIG_MIPS_MIRAGE
-+ au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
-+#endif
-+}
-+
- void __init board_setup(void)
- {
- u32 pin_func;
-@@ -108,8 +127,42 @@
+@@ -108,8 +120,42 @@
au_writel(0x02000200, GPIO2_OUTPUT);
#endif
#endif
diff -Nur linux-2.4.29/arch/mips/au1000/db1x00/irqmap.c linux-mips/arch/mips/au1000/db1x00/irqmap.c
--- linux-2.4.29/arch/mips/au1000/db1x00/irqmap.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/db1x00/irqmap.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/db1x00/irqmap.c 2005-01-30 09:06:19.000000000 +0100
@@ -53,6 +53,7 @@
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG#
diff -Nur linux-2.4.29/arch/mips/au1000/db1x00/Makefile linux-mips/arch/mips/au1000/db1x00/Makefile
--- linux-2.4.29/arch/mips/au1000/db1x00/Makefile 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/db1x00/Makefile 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/db1x00/Makefile 2005-01-30 09:06:19.000000000 +0100
@@ -17,4 +17,11 @@
obj-y := init.o board_setup.o irqmap.o
obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
+module_exit(au1xxx_dock_exit);
diff -Nur linux-2.4.29/arch/mips/au1000/ficmmp/board_setup.c linux-mips/arch/mips/au1000/ficmmp/board_setup.c
--- linux-2.4.29/arch/mips/au1000/ficmmp/board_setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/arch/mips/au1000/ficmmp/board_setup.c 2005-03-19 08:17:51.000000000 +0100
-@@ -0,0 +1,226 @@
++++ linux-mips/arch/mips/au1000/ficmmp/board_setup.c 2005-03-13 09:04:16.000000000 +0100
+@@ -0,0 +1,222 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ au_writel(0, 0xAD80001C);
+}
+
-+void board_power_off (void)
-+{
-+}
-+
+void __init board_setup(void)
+{
+ char *argptr = NULL;
+include $(TOPDIR)/Rules.make
diff -Nur linux-2.4.29/arch/mips/au1000/hydrogen3/board_setup.c linux-mips/arch/mips/au1000/hydrogen3/board_setup.c
--- linux-2.4.29/arch/mips/au1000/hydrogen3/board_setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/hydrogen3/board_setup.c 2005-03-26 11:47:17.377799647 +0100
-@@ -51,12 +51,19 @@
- {
- }
-
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- u32 pin_func;
++++ linux-mips/arch/mips/au1000/hydrogen3/board_setup.c 2005-01-30 09:07:57.000000000 +0100
+@@ -57,6 +57,9 @@
rtc_ops = &no_rtc_ops;
+module_exit(hydrogen3_buttons_exit);
diff -Nur linux-2.4.29/arch/mips/au1000/hydrogen3/Makefile linux-mips/arch/mips/au1000/hydrogen3/Makefile
--- linux-2.4.29/arch/mips/au1000/hydrogen3/Makefile 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/hydrogen3/Makefile 2005-03-26 11:47:17.372800467 +0100
++++ linux-mips/arch/mips/au1000/hydrogen3/Makefile 2005-02-11 22:09:55.000000000 +0100
@@ -14,6 +14,11 @@
O_TARGET := hydrogen3.o
};
const long min_idsel = 0, max_idsel = 3, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
-diff -Nur linux-2.4.29/arch/mips/au1000/pb1000/board_setup.c linux-mips/arch/mips/au1000/pb1000/board_setup.c
---- linux-2.4.29/arch/mips/au1000/pb1000/board_setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/pb1000/board_setup.c 2005-03-26 11:47:17.413793739 +0100
-@@ -58,6 +58,10 @@
- {
- }
-
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- u32 pin_func, static_cfg0;
-diff -Nur linux-2.4.29/arch/mips/au1000/pb1100/board_setup.c linux-mips/arch/mips/au1000/pb1100/board_setup.c
---- linux-2.4.29/arch/mips/au1000/pb1100/board_setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/pb1100/board_setup.c 2005-03-26 11:47:17.418792919 +0100
-@@ -62,6 +62,10 @@
- au_writel(0x00000000, 0xAE00001C);
- }
-
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- u32 pin_func;
diff -Nur linux-2.4.29/arch/mips/au1000/pb1100/Makefile linux-mips/arch/mips/au1000/pb1100/Makefile
--- linux-2.4.29/arch/mips/au1000/pb1100/Makefile 2003-08-25 13:44:39.000000000 +0200
-+++ linux-mips/arch/mips/au1000/pb1100/Makefile 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/pb1100/Makefile 2005-01-30 09:10:29.000000000 +0100
@@ -16,4 +16,10 @@
obj-y := init.o board_setup.o irqmap.o
+
diff -Nur linux-2.4.29/arch/mips/au1000/pb1200/board_setup.c linux-mips/arch/mips/au1000/pb1200/board_setup.c
--- linux-2.4.29/arch/mips/au1000/pb1200/board_setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/arch/mips/au1000/pb1200/board_setup.c 2005-03-19 08:17:51.000000000 +0100
-@@ -0,0 +1,221 @@
++++ linux-mips/arch/mips/au1000/pb1200/board_setup.c 2005-03-13 09:04:16.000000000 +0100
+@@ -0,0 +1,216 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ bcsr->resets = 0;
+}
+
-+void board_power_off (void)
-+{
-+ bcsr->resets = 0xC000;
-+}
-+
+void __init board_setup(void)
+{
+ char *argptr = NULL;
+EXPORT_SYMBOL(mmc_power_on);
+EXPORT_SYMBOL(mmc_power_off);
+
-diff -Nur linux-2.4.29/arch/mips/au1000/pb1500/board_setup.c linux-mips/arch/mips/au1000/pb1500/board_setup.c
---- linux-2.4.29/arch/mips/au1000/pb1500/board_setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/pb1500/board_setup.c 2005-03-26 11:47:17.496780119 +0100
-@@ -62,6 +62,10 @@
- au_writel(0x00000000, 0xAE00001C);
- }
-
-+void board_power_off (void)
-+{
-+}
-+
- void __init board_setup(void)
- {
- u32 pin_func;
diff -Nur linux-2.4.29/arch/mips/au1000/pb1550/board_setup.c linux-mips/arch/mips/au1000/pb1550/board_setup.c
--- linux-2.4.29/arch/mips/au1000/pb1550/board_setup.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/pb1550/board_setup.c 2005-03-26 11:47:17.496780119 +0100
-@@ -48,12 +48,31 @@
++++ linux-mips/arch/mips/au1000/pb1550/board_setup.c 2005-01-30 09:01:28.000000000 +0100
+@@ -48,6 +48,16 @@
extern struct rtc_ops no_rtc_ops;
void board_reset (void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
- }
-
-+void board_power_off (void)
-+{
-+ /* power off system */
-+ printk("\n** Powering off Pb1550\n");
-+ au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
-+ au_sync();
-+ while(1); /* should not get here */
-+}
-+
- void __init board_setup(void)
- {
- u32 pin_func;
-@@ -78,5 +97,36 @@
+@@ -78,5 +88,36 @@
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
}
diff -Nur linux-2.4.29/arch/mips/au1000/pb1550/irqmap.c linux-mips/arch/mips/au1000/pb1550/irqmap.c
--- linux-2.4.29/arch/mips/au1000/pb1550/irqmap.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/au1000/pb1550/irqmap.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/au1000/pb1550/irqmap.c 2005-01-30 09:01:28.000000000 +0100
@@ -50,6 +50,9 @@
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
diff -Nur linux-2.4.29/arch/mips/config-shared.in linux-mips/arch/mips/config-shared.in
--- linux-2.4.29/arch/mips/config-shared.in 2005-01-19 15:09:27.000000000 +0100
-+++ linux-mips/arch/mips/config-shared.in 2005-01-31 12:59:28.000000000 +0100
++++ linux-mips/arch/mips/config-shared.in 2005-01-30 09:01:26.000000000 +0100
@@ -21,16 +21,19 @@
comment 'Machine selection'
dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
"$CONFIG_NINO" = "y" -o \
diff -Nur linux-2.4.29/arch/mips/defconfig linux-mips/arch/mips/defconfig
--- linux-2.4.29/arch/mips/defconfig 2005-01-19 15:09:27.000000000 +0100
-+++ linux-mips/arch/mips/defconfig 2005-03-26 11:47:13.509434535 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig 2005-01-09 20:33:59.000000000 +0100
@@ -235,11 +235,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
+@@ -319,6 +314,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -465,7 +462,6 @@
- # CONFIG_SERIAL is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-atlas linux-mips/arch/mips/defconfig-atlas
--- linux-2.4.29/arch/mips/defconfig-atlas 2005-01-19 15:09:27.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-atlas 2005-03-26 11:47:13.579423048 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-atlas 2005-01-09 20:33:59.000000000 +0100
@@ -235,11 +235,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -317,9 +312,11 @@
+@@ -317,6 +312,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -528,7 +525,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-bosporus linux-mips/arch/mips/defconfig-bosporus
--- linux-2.4.29/arch/mips/defconfig-bosporus 2005-01-19 15:09:27.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-bosporus 2005-03-26 11:47:13.674407459 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -208,9 +208,7 @@
- CONFIG_MTD_BOSPORUS=y
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -229,7 +227,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -373,11 +370,6 @@
++++ linux-mips/arch/mips/defconfig-bosporus 2005-01-30 09:01:26.000000000 +0100
+@@ -373,11 +373,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -457,9 +449,11 @@
+@@ -457,6 +452,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -681,7 +675,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
+@@ -899,7 +895,7 @@
+ # CONFIG_USB_UHCI is not set
+ # CONFIG_USB_UHCI_ALT is not set
+ CONFIG_USB_OHCI=y
+-
++CONFIG_USB_NON_PCI_OHCI=y
+ #
+ # USB Device Class drivers
+ #
diff -Nur linux-2.4.29/arch/mips/defconfig-capcella linux-mips/arch/mips/defconfig-capcella
--- linux-2.4.29/arch/mips/defconfig-capcella 2005-01-19 15:09:27.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-capcella 2005-03-26 11:47:13.739396793 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-capcella 2005-01-09 20:33:59.000000000 +0100
@@ -228,11 +228,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -472,7 +467,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-cobalt linux-mips/arch/mips/defconfig-cobalt
--- linux-2.4.29/arch/mips/defconfig-cobalt 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-cobalt 2005-03-26 11:47:13.804386126 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-cobalt 2005-01-09 20:33:59.000000000 +0100
@@ -222,11 +222,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -505,7 +500,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=16
-
diff -Nur linux-2.4.29/arch/mips/defconfig-csb250 linux-mips/arch/mips/defconfig-csb250
--- linux-2.4.29/arch/mips/defconfig-csb250 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-csb250 2005-03-26 11:47:13.887372506 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- CONFIG_COGENT_CSB250=y
++++ linux-mips/arch/mips/defconfig-csb250 2005-01-09 20:33:59.000000000 +0100
@@ -268,11 +268,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -556,7 +551,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-db1000 linux-mips/arch/mips/defconfig-db1000
--- linux-2.4.29/arch/mips/defconfig-db1000 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-db1000 2005-03-26 11:47:13.987356097 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-db1000 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ CONFIG_MIPS_DB1000=y
+ # CONFIG_MIPS_DB1100 is not set
+ # CONFIG_MIPS_DB1500 is not set
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -214,11 +214,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--CONFIG_MTD_DB1X00=y
--CONFIG_MTD_DB1X00_BOOT=y
--CONFIG_MTD_DB1X00_USER=y
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -237,7 +233,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -342,11 +337,6 @@
+@@ -342,11 +345,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -636,7 +626,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-db1100 linux-mips/arch/mips/defconfig-db1100
--- linux-2.4.29/arch/mips/defconfig-db1100 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-db1100 2005-03-26 11:47:14.088339523 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-db1100 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ CONFIG_MIPS_DB1100=y
+ # CONFIG_MIPS_DB1500 is not set
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -214,11 +214,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--CONFIG_MTD_DB1X00=y
--# CONFIG_MTD_DB1X00_BOOT is not set
--CONFIG_MTD_DB1X00_USER=y
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -237,7 +233,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -342,11 +337,6 @@
+@@ -342,11 +345,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -636,7 +626,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
-@@ -884,6 +873,7 @@
- # CONFIG_FB_PM2 is not set
- # CONFIG_FB_PM3 is not set
- # CONFIG_FB_CYBER2000 is not set
-+CONFIG_FB_AU1100=y
- # CONFIG_FB_MATROX is not set
- # CONFIG_FB_ATY is not set
- # CONFIG_FB_RADEON is not set
-@@ -895,7 +885,6 @@
- # CONFIG_FB_VOODOO1 is not set
- # CONFIG_FB_TRIDENT is not set
- # CONFIG_FB_E1356 is not set
--CONFIG_FB_AU1100=y
- # CONFIG_FB_IT8181 is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_FBCON_ADVANCED=y
diff -Nur linux-2.4.29/arch/mips/defconfig-db1200 linux-mips/arch/mips/defconfig-db1200
--- linux-2.4.29/arch/mips/defconfig-db1200 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-db1200 2005-03-26 11:47:14.182324098 +0100
-@@ -0,0 +1,1032 @@
++++ linux-mips/arch/mips/defconfig-db1200 2005-01-30 09:01:26.000000000 +0100
+@@ -0,0 +1,1051 @@
+#
+# Automatically generated make config: don't edit
+#
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
++CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++CONFIG_SOC_AU1X00=y
++CONFIG_SOC_AU1200=y
++CONFIG_NONCOHERENT_IO=y
++CONFIG_PC_KEYB=y
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CONFIG_TCIC is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
++CONFIG_PCMCIA_AU1X00=m
+
+#
+# PCI Hotplug Support
+# CONFIG_OOM_KILLER is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="mem=96M"
++# CONFIG_PM is not set
+
+#
+# Memory Technology Devices (MTD)
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
++# CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SERIAL_TX3912_CONSOLE is not set
+# CONFIG_SERIAL_TXX9 is not set
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
++CONFIG_AU1X00_UART=y
++CONFIG_AU1X00_SERIAL_CONSOLE=y
++# CONFIG_AU1X00_USB_TTY is not set
++# CONFIG_AU1X00_USB_RAW is not set
+# CONFIG_TXX927_SERIAL is not set
++# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
+# CONFIG_PCMCIA_SERIAL_CS is not set
+# CONFIG_SYNCLINK_CS is not set
++# CONFIG_AU1X00_GPIO is not set
++# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# File systems
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
++# CONFIG_SOUND_AU1X00 is not set
++CONFIG_SOUND_AU1550_PSC=y
++# CONFIG_SOUND_AU1550_I2S is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_FW_LOADER is not set
diff -Nur linux-2.4.29/arch/mips/defconfig-db1500 linux-mips/arch/mips/defconfig-db1500
--- linux-2.4.29/arch/mips/defconfig-db1500 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-db1500 2005-03-26 11:47:14.271309493 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-db1500 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+ CONFIG_MIPS_DB1500=y
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -267,11 +267,6 @@
+@@ -267,11 +270,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -555,7 +550,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-db1550 linux-mips/arch/mips/defconfig-db1550
--- linux-2.4.29/arch/mips/defconfig-db1550 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-db1550 2005-03-26 11:47:14.372292920 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-db1550 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+ # CONFIG_MIPS_DB1500 is not set
+ CONFIG_MIPS_DB1550=y
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -213,11 +213,9 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- CONFIG_MTD_PB1550=y
- CONFIG_MTD_PB1550_BOOT=y
- CONFIG_MTD_PB1550_USER=y
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -343,11 +340,6 @@
+@@ -343,11 +346,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -633,7 +625,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-ddb5476 linux-mips/arch/mips/defconfig-ddb5476
--- linux-2.4.29/arch/mips/defconfig-ddb5476 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ddb5476 2005-03-26 11:47:14.442281433 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-ddb5476 2005-01-09 20:33:59.000000000 +0100
@@ -226,11 +226,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -517,7 +512,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-ddb5477 linux-mips/arch/mips/defconfig-ddb5477
--- linux-2.4.29/arch/mips/defconfig-ddb5477 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ddb5477 2005-03-26 11:47:14.507270767 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-ddb5477 2005-01-09 20:33:59.000000000 +0100
@@ -226,11 +226,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -434,7 +429,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-decstation linux-mips/arch/mips/defconfig-decstation
--- linux-2.4.29/arch/mips/defconfig-decstation 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-decstation 2005-03-26 11:47:14.573259936 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-decstation 2005-01-09 20:33:59.000000000 +0100
@@ -223,11 +223,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -306,9 +301,11 @@
+@@ -306,6 +301,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- CONFIG_SERIAL_DEC_CONSOLE=y
- CONFIG_DZ=y
- CONFIG_ZS=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-e55 linux-mips/arch/mips/defconfig-e55
--- linux-2.4.29/arch/mips/defconfig-e55 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-e55 2005-03-26 11:47:14.632250255 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-e55 2005-01-09 20:33:59.000000000 +0100
@@ -222,11 +222,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -426,7 +421,6 @@
- # CONFIG_SERIAL_MULTIPORT is not set
- # CONFIG_HUB6 is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-eagle linux-mips/arch/mips/defconfig-eagle
--- linux-2.4.29/arch/mips/defconfig-eagle 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-eagle 2005-03-26 11:47:14.721235650 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -208,8 +208,8 @@
- # Mapping drivers for chip access
- #
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=1c000000
--CONFIG_MTD_PHYSMAP_LEN=2000000
-+CONFIG_MTD_PHYSMAP_START=0x1c000000
-+CONFIG_MTD_PHYSMAP_LEN=0x2000000
- CONFIG_MTD_PHYSMAP_BUSWIDTH=4
- # CONFIG_MTD_PB1000 is not set
- # CONFIG_MTD_PB1500 is not set
-@@ -217,9 +217,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -238,7 +236,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -327,11 +324,6 @@
++++ linux-mips/arch/mips/defconfig-eagle 2005-01-09 20:33:59.000000000 +0100
+@@ -327,11 +327,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -587,7 +579,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-ev64120 linux-mips/arch/mips/defconfig-ev64120
--- linux-2.4.29/arch/mips/defconfig-ev64120 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ev64120 2005-03-26 11:47:14.780225968 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-ev64120 2005-01-09 20:33:59.000000000 +0100
@@ -230,11 +230,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -443,7 +438,6 @@
- # CONFIG_SERIAL_CONSOLE is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-ev96100 linux-mips/arch/mips/defconfig-ev96100
--- linux-2.4.29/arch/mips/defconfig-ev96100 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ev96100 2005-03-26 11:47:14.833217271 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-ev96100 2005-01-09 20:33:59.000000000 +0100
@@ -232,11 +232,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -441,7 +436,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-ficmmp linux-mips/arch/mips/defconfig-ficmmp
--- linux-2.4.29/arch/mips/defconfig-ficmmp 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ficmmp 2005-03-26 11:47:14.922202667 +0100
-@@ -0,0 +1,862 @@
++++ linux-mips/arch/mips/defconfig-ficmmp 2005-02-03 07:35:29.000000000 +0100
+@@ -0,0 +1,880 @@
+#
+# Automatically generated make config: don't edit
+#
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
++CONFIG_MIPS_FICMMP=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++CONFIG_SOC_AU1X00=y
++CONFIG_SOC_AU1200=y
++CONFIG_NONCOHERENT_IO=y
++CONFIG_PC_KEYB=y
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CONFIG_OOM_KILLER is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ide3=dma mem=96M root=/dev/hda2 rootflags=data=journal"
++# CONFIG_PM is not set
+
+#
+# Memory Technology Devices (MTD)
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
++# CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SERIAL_TX3912_CONSOLE is not set
+# CONFIG_SERIAL_TXX9 is not set
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
++CONFIG_AU1X00_UART=y
++CONFIG_AU1X00_SERIAL_CONSOLE=y
++# CONFIG_AU1X00_USB_TTY is not set
++# CONFIG_AU1X00_USB_RAW is not set
+# CONFIG_TXX927_SERIAL is not set
++# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
++# CONFIG_AU1X00_GPIO is not set
++# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# File systems
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
++# CONFIG_SOUND_AU1X00 is not set
++# CONFIG_SOUND_AU1550_PSC is not set
++# CONFIG_SOUND_AU1550_I2S is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_ZLIB_DEFLATE=m
diff -Nur linux-2.4.29/arch/mips/defconfig-hp-lj linux-mips/arch/mips/defconfig-hp-lj
--- linux-2.4.29/arch/mips/defconfig-hp-lj 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-hp-lj 2005-03-26 11:47:14.993191016 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -184,8 +184,8 @@
- # Mapping drivers for chip access
- #
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=10040000
--CONFIG_MTD_PHYSMAP_LEN=00fc0000
-+CONFIG_MTD_PHYSMAP_START=0x10040000
-+CONFIG_MTD_PHYSMAP_LEN=0x00fc0000
- CONFIG_MTD_PHYSMAP_BUSWIDTH=4
- # CONFIG_MTD_PB1000 is not set
- # CONFIG_MTD_PB1500 is not set
-@@ -193,9 +193,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -214,7 +212,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -304,11 +301,6 @@
++++ linux-mips/arch/mips/defconfig-hp-lj 2005-01-09 20:33:59.000000000 +0100
+@@ -304,11 +304,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -604,7 +596,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
-
- #
diff -Nur linux-2.4.29/arch/mips/defconfig-hydrogen3 linux-mips/arch/mips/defconfig-hydrogen3
--- linux-2.4.29/arch/mips/defconfig-hydrogen3 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-hydrogen3 2005-03-26 11:47:15.093174606 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-hydrogen3 2005-01-30 09:01:26.000000000 +0100
+@@ -22,6 +22,7 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+@@ -30,9 +31,11 @@
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_HYDROGEN3=y
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_HYDROGEN3=y
# CONFIG_MIPS_XXS1500 is not set
++# CONFIG_MIPS_EP1000 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -214,9 +214,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
+ # CONFIG_BAGET_MIPS is not set
+@@ -185,6 +188,7 @@
+ CONFIG_MTD_BLOCK=y
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -196,6 +200,7 @@
+ # CONFIG_MTD_CFI_INTELEXT is not set
+ CONFIG_MTD_CFI_AMDSTD=y
+ # CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
+ # CONFIG_MTD_RAM is not set
+ # CONFIG_MTD_ROM is not set
+ # CONFIG_MTD_ABSENT is not set
+@@ -207,17 +212,12 @@
+ #
+ # Mapping drivers for chip access
+ #
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ # CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_PB1000 is not set
+-# CONFIG_MTD_PB1500 is not set
+-# CONFIG_MTD_PB1100 is not set
+-# CONFIG_MTD_BOSPORUS is not set
+-# CONFIG_MTD_XXS1500 is not set
+-# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-CONFIG_MTD_HYDROGEN3=y
- # CONFIG_MTD_MIRAGE is not set
+-# CONFIG_MTD_MIRAGE is not set
++# CONFIG_MTD_DB1550 is not set
++# CONFIG_MTD_PB1200 is not set
++# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
-@@ -235,7 +233,6 @@
+ # CONFIG_MTD_LASAT is not set
+@@ -235,9 +235,9 @@
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_DOCPROBE is not set
-@@ -340,11 +337,6 @@
+
+ #
+@@ -340,11 +340,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -590,7 +582,6 @@
+@@ -386,6 +381,7 @@
+ #
+ # Please see Documentation/ide.txt for help/info on IDE drives
+ #
++# CONFIG_BLK_DEV_IDE_AU1XXX is not set
+ # CONFIG_BLK_DEV_HD_IDE is not set
+ # CONFIG_BLK_DEV_HD is not set
+ # CONFIG_BLK_DEV_IDE_SATA is not set
+@@ -403,6 +399,7 @@
+ #
+ # IDE chipset support/bugfixes
+ #
++# CONFIG_BLK_DEV_IDE_AU1XXX is not set
+ # CONFIG_BLK_DEV_CMD640 is not set
+ # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+ # CONFIG_BLK_DEV_ISAPNP is not set
+@@ -590,7 +587,6 @@
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
-@@ -838,6 +829,7 @@
+@@ -677,6 +673,12 @@
+ # CONFIG_SYNCLINK_CS is not set
+ # CONFIG_AU1X00_GPIO is not set
+ # CONFIG_TS_AU1X00_ADS7846 is not set
++# CONFIG_AU1550_PSC_SPI is not set
++# CONFIG_AU1XXX_MAE is not set
++# CONFIG_AU1XXX_AES is not set
++# CONFIG_AU1XXX_CIM is not set
++# CONFIG_AU1XXX_AES_TEST is not set
++CONFIG_AU1XXX_BUTTONS=y
+
+ #
+ # File systems
+@@ -838,18 +840,20 @@
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_AU1100=y
++# CONFIG_FOCUS_ENHANCEMENTS is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
-@@ -849,7 +841,6 @@
+ # CONFIG_FB_ATY128 is not set
+ # CONFIG_FB_INTEL is not set
+ # CONFIG_FB_SIS is not set
++# CONFIG_FB_SMI501 is not set
+ # CONFIG_FB_NEOMAGIC is not set
+ # CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
+@@ -923,9 +927,11 @@
+ # USB Host Controller Drivers
+ #
+ # CONFIG_USB_EHCI_HCD is not set
++# CONFIG_USB_NON_PCI_EHCI is not set
+ # CONFIG_USB_UHCI is not set
+ # CONFIG_USB_UHCI_ALT is not set
+ CONFIG_USB_OHCI=y
++CONFIG_USB_NON_PCI_OHCI=y
+
+ #
+ # USB Device Class drivers
diff -Nur linux-2.4.29/arch/mips/defconfig-ip22 linux-mips/arch/mips/defconfig-ip22
--- linux-2.4.29/arch/mips/defconfig-ip22 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ip22 2005-03-26 11:47:15.165162791 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-ip22 2005-01-09 20:33:59.000000000 +0100
@@ -235,11 +235,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
+@@ -319,6 +314,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -465,7 +462,6 @@
- # CONFIG_SERIAL is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-it8172 linux-mips/arch/mips/defconfig-it8172
--- linux-2.4.29/arch/mips/defconfig-it8172 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-it8172 2005-03-26 11:47:15.242150156 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -186,8 +186,8 @@
- # Mapping drivers for chip access
- #
- CONFIG_MTD_PHYSMAP=y
--CONFIG_MTD_PHYSMAP_START=8000000
--CONFIG_MTD_PHYSMAP_LEN=2000000
-+CONFIG_MTD_PHYSMAP_START=0x8000000
-+CONFIG_MTD_PHYSMAP_LEN=0x2000000
- CONFIG_MTD_PHYSMAP_BUSWIDTH=4
- # CONFIG_MTD_PB1000 is not set
- # CONFIG_MTD_PB1500 is not set
-@@ -195,9 +195,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -216,7 +214,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -304,11 +301,6 @@
++++ linux-mips/arch/mips/defconfig-it8172 2005-01-09 20:33:59.000000000 +0100
+@@ -304,11 +304,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -592,7 +584,6 @@
- CONFIG_PC_KEYB=y
- # CONFIG_IT8172_SCR0 is not set
- # CONFIG_IT8172_SCR1 is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-ivr linux-mips/arch/mips/defconfig-ivr
--- linux-2.4.29/arch/mips/defconfig-ivr 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ivr 2005-03-26 11:47:15.318137685 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-ivr 2005-01-09 20:33:59.000000000 +0100
@@ -226,11 +226,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -516,7 +511,6 @@
- CONFIG_QTRONIX_KEYBOARD=y
- CONFIG_IT8172_CIR=y
- # CONFIG_IT8172_SCR0 is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-jmr3927 linux-mips/arch/mips/defconfig-jmr3927
--- linux-2.4.29/arch/mips/defconfig-jmr3927 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-jmr3927 2005-03-26 11:47:15.384126854 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-jmr3927 2005-01-09 20:33:59.000000000 +0100
@@ -225,11 +225,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -454,7 +449,6 @@
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- CONFIG_TXX927_SERIAL=y
- CONFIG_TXX927_SERIAL_CONSOLE=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
-
- #
diff -Nur linux-2.4.29/arch/mips/defconfig-lasat linux-mips/arch/mips/defconfig-lasat
--- linux-2.4.29/arch/mips/defconfig-lasat 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-lasat 2005-03-26 11:47:15.455115204 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -198,9 +198,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -219,7 +217,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -303,11 +300,6 @@
++++ linux-mips/arch/mips/defconfig-lasat 2005-01-09 20:33:59.000000000 +0100
+@@ -303,11 +303,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -584,7 +576,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-malta linux-mips/arch/mips/defconfig-malta
--- linux-2.4.29/arch/mips/defconfig-malta 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-malta 2005-03-26 11:47:15.526103553 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-malta 2005-01-09 20:33:59.000000000 +0100
@@ -237,11 +237,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
+@@ -319,6 +314,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -524,7 +521,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-mirage linux-mips/arch/mips/defconfig-mirage
--- linux-2.4.29/arch/mips/defconfig-mirage 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-mirage 2005-03-26 11:47:15.615088948 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -209,9 +209,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- CONFIG_MTD_MIRAGE=y
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -230,7 +228,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -335,11 +332,6 @@
++++ linux-mips/arch/mips/defconfig-mirage 2005-01-30 09:01:26.000000000 +0100
+@@ -335,11 +335,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -560,7 +552,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
+@@ -863,7 +858,7 @@
+ # CONFIG_USB_UHCI is not set
+ # CONFIG_USB_UHCI_ALT is not set
+ CONFIG_USB_OHCI=y
+-
++CONFIG_USB_NON_PCI_OHCI=y
+ #
+ # USB Device Class drivers
+ #
diff -Nur linux-2.4.29/arch/mips/defconfig-mpc30x linux-mips/arch/mips/defconfig-mpc30x
--- linux-2.4.29/arch/mips/defconfig-mpc30x 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-mpc30x 2005-03-26 11:47:15.680078282 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-mpc30x 2005-01-09 20:33:59.000000000 +0100
@@ -228,11 +228,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -400,7 +395,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-mtx-1 linux-mips/arch/mips/defconfig-mtx-1
--- linux-2.4.29/arch/mips/defconfig-mtx-1 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-mtx-1 2005-03-26 11:47:15.793059739 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- CONFIG_MIPS_MTX1=y
- # CONFIG_COGENT_CSB250 is not set
-@@ -193,9 +193,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- CONFIG_MTD_MTX1=y
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -214,7 +212,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -371,11 +368,6 @@
++++ linux-mips/arch/mips/defconfig-mtx-1 2005-01-20 03:19:22.000000000 +0100
+@@ -371,11 +371,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
# CONFIG_X25 is not set
-@@ -479,9 +471,11 @@
+@@ -479,6 +474,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -700,7 +694,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-nino linux-mips/arch/mips/defconfig-nino
--- linux-2.4.29/arch/mips/defconfig-nino 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-nino 2005-03-26 11:47:15.849050550 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-nino 2005-01-09 20:33:59.000000000 +0100
@@ -226,11 +226,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -339,7 +334,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
-
- #
diff -Nur linux-2.4.29/arch/mips/defconfig-ocelot linux-mips/arch/mips/defconfig-ocelot
--- linux-2.4.29/arch/mips/defconfig-ocelot 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ocelot 2005-03-26 11:47:15.909040704 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -194,9 +194,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- CONFIG_MTD_OCELOT=y
-@@ -215,7 +213,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- CONFIG_MTD_DOC2000=y
- # CONFIG_MTD_DOC2001 is not set
- CONFIG_MTD_DOCPROBE=y
-@@ -307,11 +304,6 @@
++++ linux-mips/arch/mips/defconfig-ocelot 2005-01-09 20:33:59.000000000 +0100
+@@ -307,11 +307,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -513,7 +505,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-osprey linux-mips/arch/mips/defconfig-osprey
--- linux-2.4.29/arch/mips/defconfig-osprey 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-osprey 2005-03-26 11:47:15.963031843 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-osprey 2005-01-09 20:33:59.000000000 +0100
@@ -227,11 +227,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -388,7 +383,6 @@
- # CONFIG_SERIAL_MULTIPORT is not set
- # CONFIG_HUB6 is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-pb1000 linux-mips/arch/mips/defconfig-pb1000
--- linux-2.4.29/arch/mips/defconfig-pb1000 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-pb1000 2005-03-26 11:47:16.057016418 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-pb1000 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+ # CONFIG_MIPS_DB1500 is not set
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
CONFIG_MIPS_PB1000=y
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -215,9 +215,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -324,11 +321,6 @@
+@@ -324,11 +327,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -622,7 +614,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
-@@ -707,7 +698,7 @@
+@@ -707,7 +705,7 @@
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_SYNCLINK_CS is not set
#
diff -Nur linux-2.4.29/arch/mips/defconfig-pb1100 linux-mips/arch/mips/defconfig-pb1100
--- linux-2.4.29/arch/mips/defconfig-pb1100 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-pb1100 2005-03-26 11:47:16.158999680 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-pb1100 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+ # CONFIG_MIPS_DB1500 is not set
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
CONFIG_MIPS_PB1100=y
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -198,9 +198,7 @@
- # CONFIG_MTD_MTX1 is not set
- CONFIG_MTD_PB1500_BOOT=y
- CONFIG_MTD_PB1500_USER=y
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -219,7 +217,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -324,11 +321,6 @@
+@@ -324,11 +327,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -613,7 +605,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
-@@ -859,6 +850,7 @@
- # CONFIG_FB_PM2 is not set
- # CONFIG_FB_PM3 is not set
- # CONFIG_FB_CYBER2000 is not set
-+CONFIG_FB_AU1100=y
- # CONFIG_FB_MATROX is not set
- # CONFIG_FB_ATY is not set
- # CONFIG_FB_RADEON is not set
-@@ -870,7 +862,6 @@
- # CONFIG_FB_VOODOO1 is not set
- # CONFIG_FB_TRIDENT is not set
- # CONFIG_FB_E1356 is not set
--CONFIG_FB_AU1100=y
- # CONFIG_FB_IT8181 is not set
- # CONFIG_FB_VIRTUAL is not set
- CONFIG_FBCON_ADVANCED=y
diff -Nur linux-2.4.29/arch/mips/defconfig-pb1200 linux-mips/arch/mips/defconfig-pb1200
--- linux-2.4.29/arch/mips/defconfig-pb1200 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-pb1200 2005-03-26 11:47:16.258983270 +0100
-@@ -0,0 +1,1060 @@
++++ linux-mips/arch/mips/defconfig-pb1200 2005-01-30 09:01:27.000000000 +0100
+@@ -0,0 +1,1063 @@
+#
+# Automatically generated make config: don't edit
+#
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
++CONFIG_MIPS_PB1200=y
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_AU1X00_USB_TTY is not set
+# CONFIG_AU1X00_USB_RAW is not set
+# CONFIG_TXX927_SERIAL is not set
++# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+# CONFIG_FW_LOADER is not set
diff -Nur linux-2.4.29/arch/mips/defconfig-pb1500 linux-mips/arch/mips/defconfig-pb1500
--- linux-2.4.29/arch/mips/defconfig-pb1500 2005-01-19 15:09:28.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-pb1500 2005-03-26 11:47:16.365965712 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-pb1500 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+ # CONFIG_MIPS_DB1500 is not set
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -215,9 +215,7 @@
- # CONFIG_MTD_MTX1 is not set
- CONFIG_MTD_PB1500_BOOT=y
- # CONFIG_MTD_PB1500_USER is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -341,11 +338,6 @@
+@@ -341,11 +344,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -675,7 +667,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-pb1550 linux-mips/arch/mips/defconfig-pb1550
--- linux-2.4.29/arch/mips/defconfig-pb1550 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-pb1550 2005-03-26 11:47:16.471948318 +0100
-@@ -30,8 +30,8 @@
++++ linux-mips/arch/mips/defconfig-pb1550 2005-02-03 07:35:29.000000000 +0100
+@@ -22,16 +22,19 @@
+ #
+ # CONFIG_ACER_PICA_61 is not set
+ # CONFIG_MIPS_BOSPORUS is not set
++# CONFIG_MIPS_FICMMP is not set
+ # CONFIG_MIPS_MIRAGE is not set
+ # CONFIG_MIPS_DB1000 is not set
+ # CONFIG_MIPS_DB1100 is not set
+ # CONFIG_MIPS_DB1500 is not set
+ # CONFIG_MIPS_DB1550 is not set
++# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
CONFIG_MIPS_PB1550=y
++# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
-@@ -213,11 +213,9 @@
- # CONFIG_MTD_BOSPORUS is not set
- # CONFIG_MTD_XXS1500 is not set
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- CONFIG_MTD_PB1550=y
- CONFIG_MTD_PB1550_BOOT=y
- CONFIG_MTD_PB1550_USER=y
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -236,7 +234,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -343,11 +340,6 @@
+@@ -343,11 +346,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -633,7 +625,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-rbtx4927 linux-mips/arch/mips/defconfig-rbtx4927
--- linux-2.4.29/arch/mips/defconfig-rbtx4927 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-rbtx4927 2005-03-26 11:47:16.531938472 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-rbtx4927 2005-01-09 20:33:59.000000000 +0100
@@ -223,11 +223,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -466,7 +461,6 @@
- CONFIG_SERIAL_TXX9=y
- CONFIG_SERIAL_TXX9_CONSOLE=y
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
-
- #
diff -Nur linux-2.4.29/arch/mips/defconfig-rm200 linux-mips/arch/mips/defconfig-rm200
--- linux-2.4.29/arch/mips/defconfig-rm200 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-rm200 2005-03-26 11:47:16.579930595 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-rm200 2005-01-09 20:33:59.000000000 +0100
@@ -229,11 +229,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -340,7 +335,6 @@
- # CONFIG_SERIAL is not set
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-sb1250-swarm linux-mips/arch/mips/defconfig-sb1250-swarm
--- linux-2.4.29/arch/mips/defconfig-sb1250-swarm 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-sb1250-swarm 2005-03-26 11:47:16.645919765 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-sb1250-swarm 2005-01-09 20:33:59.000000000 +0100
@@ -90,6 +90,7 @@
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_SIBYTE_GENBUS_IDE=y
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -469,7 +465,6 @@
- CONFIG_SIBYTE_SB1250_DUART=y
- CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
- CONFIG_SERIAL_CONSOLE=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
-diff -Nur linux-2.4.29/arch/mips/defconfig-sead linux-mips/arch/mips/defconfig-sead
---- linux-2.4.29/arch/mips/defconfig-sead 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-sead 2005-03-26 11:47:16.686913037 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -244,7 +244,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
-
- #
diff -Nur linux-2.4.29/arch/mips/defconfig-stretch linux-mips/arch/mips/defconfig-stretch
--- linux-2.4.29/arch/mips/defconfig-stretch 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-stretch 2005-03-26 11:47:16.751902371 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-stretch 2005-01-09 20:33:59.000000000 +0100
@@ -240,11 +240,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -324,9 +319,11 @@
+@@ -324,6 +319,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -516,7 +513,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-tb0226 linux-mips/arch/mips/defconfig-tb0226
--- linux-2.4.29/arch/mips/defconfig-tb0226 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-tb0226 2005-03-26 11:47:16.828889735 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-tb0226 2005-01-09 20:34:00.000000000 +0100
@@ -228,11 +228,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -312,9 +307,11 @@
+@@ -312,6 +307,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -518,7 +515,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-tb0229 linux-mips/arch/mips/defconfig-tb0229
--- linux-2.4.29/arch/mips/defconfig-tb0229 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-tb0229 2005-03-26 11:47:16.893879069 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-tb0229 2005-01-09 20:34:00.000000000 +0100
@@ -230,11 +230,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -445,7 +440,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-ti1500 linux-mips/arch/mips/defconfig-ti1500
--- linux-2.4.29/arch/mips/defconfig-ti1500 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-ti1500 2005-03-26 11:47:16.995862331 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- CONFIG_MIPS_XXS1500=y
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -213,9 +213,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- CONFIG_MTD_XXS1500=y
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -234,7 +232,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -339,11 +336,6 @@
++++ linux-mips/arch/mips/defconfig-ti1500 2005-01-09 20:34:00.000000000 +0100
+@@ -339,11 +339,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -600,7 +592,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-workpad linux-mips/arch/mips/defconfig-workpad
--- linux-2.4.29/arch/mips/defconfig-workpad 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-workpad 2005-03-26 11:47:17.054852650 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-workpad 2005-01-09 20:34:00.000000000 +0100
@@ -222,11 +222,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -426,7 +421,6 @@
- # CONFIG_SERIAL_MULTIPORT is not set
- # CONFIG_HUB6 is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_VR41XX_KIU is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
diff -Nur linux-2.4.29/arch/mips/defconfig-xxs1500 linux-mips/arch/mips/defconfig-xxs1500
--- linux-2.4.29/arch/mips/defconfig-xxs1500 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-xxs1500 2005-03-26 11:47:17.143838045 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- CONFIG_MIPS_XXS1500=y
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -213,9 +213,7 @@
- # CONFIG_MTD_BOSPORUS is not set
- CONFIG_MTD_XXS1500=y
- # CONFIG_MTD_MTX1 is not set
--# CONFIG_MTD_DB1X00 is not set
- # CONFIG_MTD_PB1550 is not set
--# CONFIG_MTD_HYDROGEN3 is not set
- # CONFIG_MTD_MIRAGE is not set
- # CONFIG_MTD_CSTM_MIPS_IXX is not set
- # CONFIG_MTD_OCELOT is not set
-@@ -234,7 +232,6 @@
- #
- # Disk-On-Chip Device Drivers
- #
--# CONFIG_MTD_DOC1000 is not set
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOCPROBE is not set
-@@ -339,11 +336,6 @@
++++ linux-mips/arch/mips/defconfig-xxs1500 2005-01-09 20:34:00.000000000 +0100
+@@ -339,11 +339,6 @@
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -671,7 +663,6 @@
- # CONFIG_AU1X00_USB_TTY is not set
- # CONFIG_AU1X00_USB_RAW is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/defconfig-yosemite linux-mips/arch/mips/defconfig-yosemite
--- linux-2.4.29/arch/mips/defconfig-yosemite 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/defconfig-yosemite 2005-03-26 11:47:17.208827379 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips/defconfig-yosemite 2005-01-09 20:34:00.000000000 +0100
@@ -227,11 +227,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -310,9 +305,11 @@
+@@ -310,6 +305,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips/kernel/cpu-probe.c linux-mips/arch/mips/kernel/cpu-probe.c
--- linux-2.4.29/arch/mips/kernel/cpu-probe.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/kernel/cpu-probe.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips/kernel/cpu-probe.c 2005-01-30 09:01:28.000000000 +0100
@@ -105,6 +105,7 @@
case CPU_AU1100:
case CPU_AU1500:
diff -Nur linux-2.4.29/arch/mips/kernel/scall_o32.S linux-mips/arch/mips/kernel/scall_o32.S
--- linux-2.4.29/arch/mips/kernel/scall_o32.S 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/kernel/scall_o32.S 2005-03-26 11:47:17.566768632 +0100
++++ linux-mips/arch/mips/kernel/scall_o32.S 2005-02-07 22:21:53.000000000 +0100
@@ -121,15 +121,14 @@
trace_a_syscall:
-EXPORT_SYMBOL(rtc_ops);
diff -Nur linux-2.4.29/arch/mips/Makefile linux-mips/arch/mips/Makefile
--- linux-2.4.29/arch/mips/Makefile 2005-01-19 15:09:26.000000000 +0100
-+++ linux-mips/arch/mips/Makefile 2005-01-31 12:59:28.000000000 +0100
++++ linux-mips/arch/mips/Makefile 2005-01-30 09:01:26.000000000 +0100
@@ -211,7 +211,7 @@
endif
prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
diff -Nur linux-2.4.29/arch/mips/mm/c-r4k.c linux-mips/arch/mips/mm/c-r4k.c
--- linux-2.4.29/arch/mips/mm/c-r4k.c 2005-01-19 15:09:29.000000000 +0100
-+++ linux-mips/arch/mips/mm/c-r4k.c 2005-03-26 11:47:17.585765515 +0100
++++ linux-mips/arch/mips/mm/c-r4k.c 2005-02-06 22:55:42.000000000 +0100
@@ -867,9 +867,16 @@
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
* You should never change this register:
diff -Nur linux-2.4.29/arch/mips64/defconfig linux-mips/arch/mips64/defconfig
--- linux-2.4.29/arch/mips64/defconfig 2005-01-19 15:09:30.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig 2005-03-26 11:47:17.749738603 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -470,9 +470,11 @@
++++ linux-mips/arch/mips64/defconfig 2005-01-20 03:19:22.000000000 +0100
+@@ -470,6 +470,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -658,7 +660,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-atlas linux-mips/arch/mips64/defconfig-atlas
--- linux-2.4.29/arch/mips64/defconfig-atlas 2005-01-19 15:09:30.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-atlas 2005-03-26 11:47:17.816727608 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-atlas 2005-01-09 20:34:01.000000000 +0100
@@ -232,11 +232,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -314,9 +309,11 @@
+@@ -314,6 +309,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -474,7 +471,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-decstation linux-mips/arch/mips64/defconfig-decstation
--- linux-2.4.29/arch/mips64/defconfig-decstation 2005-01-19 15:09:30.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-decstation 2005-03-26 11:47:17.884716450 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-decstation 2005-01-09 20:34:01.000000000 +0100
@@ -224,11 +224,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -307,9 +302,11 @@
+@@ -307,6 +302,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- CONFIG_SERIAL_DEC_CONSOLE=y
- # CONFIG_DZ is not set
- CONFIG_ZS=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-ip22 linux-mips/arch/mips64/defconfig-ip22
--- linux-2.4.29/arch/mips64/defconfig-ip22 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-ip22 2005-03-26 11:47:17.955704799 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-ip22 2005-01-09 20:34:01.000000000 +0100
@@ -235,11 +235,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -319,9 +314,11 @@
+@@ -319,6 +314,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -488,7 +485,6 @@
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
- CONFIG_IP22_SERIAL=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-ip27 linux-mips/arch/mips64/defconfig-ip27
--- linux-2.4.29/arch/mips64/defconfig-ip27 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-ip27 2005-03-26 11:47:18.038691179 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -470,9 +470,11 @@
++++ linux-mips/arch/mips64/defconfig-ip27 2005-01-20 03:19:22.000000000 +0100
+@@ -470,6 +470,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -658,7 +660,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-jaguar linux-mips/arch/mips64/defconfig-jaguar
--- linux-2.4.29/arch/mips64/defconfig-jaguar 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-jaguar 2005-03-26 11:47:18.091682482 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-jaguar 2005-01-09 20:34:01.000000000 +0100
@@ -227,11 +227,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -403,7 +398,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-malta linux-mips/arch/mips64/defconfig-malta
--- linux-2.4.29/arch/mips64/defconfig-malta 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-malta 2005-03-26 11:47:18.150672800 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-malta 2005-01-09 20:34:01.000000000 +0100
@@ -235,11 +235,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -317,9 +312,11 @@
+@@ -317,6 +312,7 @@
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
-+# CONFIG_SCSI_SATA_QSTOR is not set
- # CONFIG_SCSI_SATA_PROMISE is not set
- # CONFIG_SCSI_SATA_SX4 is not set
- # CONFIG_SCSI_SATA_SIL is not set
-@@ -477,7 +474,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-ocelotc linux-mips/arch/mips64/defconfig-ocelotc
--- linux-2.4.29/arch/mips64/defconfig-ocelotc 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-ocelotc 2005-03-26 11:47:18.209663119 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-ocelotc 2005-01-09 20:34:01.000000000 +0100
@@ -231,11 +231,6 @@
#
# CONFIG_IPX is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -453,7 +448,6 @@
- # CONFIG_SERIAL_TXX9 is not set
- # CONFIG_SERIAL_TXX9_CONSOLE is not set
- # CONFIG_TXX927_SERIAL is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
diff -Nur linux-2.4.29/arch/mips64/defconfig-sb1250-swarm linux-mips/arch/mips64/defconfig-sb1250-swarm
--- linux-2.4.29/arch/mips64/defconfig-sb1250-swarm 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-sb1250-swarm 2005-03-26 11:47:18.269653273 +0100
-@@ -30,8 +30,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
++++ linux-mips/arch/mips64/defconfig-sb1250-swarm 2005-01-09 20:34:01.000000000 +0100
@@ -90,6 +90,7 @@
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_SIBYTE_GENBUS_IDE=y
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
-@@ -432,7 +428,6 @@
- CONFIG_SIBYTE_SB1250_DUART=y
- CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
- CONFIG_SERIAL_CONSOLE=y
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- CONFIG_UNIX98_PTYS=y
- CONFIG_UNIX98_PTY_COUNT=256
-
-diff -Nur linux-2.4.29/arch/mips64/defconfig-sead linux-mips/arch/mips64/defconfig-sead
---- linux-2.4.29/arch/mips64/defconfig-sead 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/defconfig-sead 2005-03-26 11:47:18.311646381 +0100
-@@ -28,8 +28,8 @@
- # CONFIG_MIPS_PB1000 is not set
- # CONFIG_MIPS_PB1100 is not set
- # CONFIG_MIPS_PB1500 is not set
--# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_PB1550 is not set
-+# CONFIG_MIPS_HYDROGEN3 is not set
- # CONFIG_MIPS_XXS1500 is not set
- # CONFIG_MIPS_MTX1 is not set
- # CONFIG_COGENT_CSB250 is not set
-@@ -242,7 +242,6 @@
- CONFIG_SERIAL_CONSOLE=y
- # CONFIG_SERIAL_EXTENDED is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
--# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
- # CONFIG_UNIX98_PTYS is not set
-
- #
diff -Nur linux-2.4.29/arch/mips64/kernel/binfmt_elfn32.c linux-mips/arch/mips64/kernel/binfmt_elfn32.c
--- linux-2.4.29/arch/mips64/kernel/binfmt_elfn32.c 2003-08-25 13:44:40.000000000 +0200
-+++ linux-mips/arch/mips64/kernel/binfmt_elfn32.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips64/kernel/binfmt_elfn32.c 2005-01-26 03:40:47.000000000 +0100
@@ -116,4 +116,7 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
#include "../../../fs/binfmt_elf.c"
diff -Nur linux-2.4.29/arch/mips64/kernel/binfmt_elfo32.c linux-mips/arch/mips64/kernel/binfmt_elfo32.c
--- linux-2.4.29/arch/mips64/kernel/binfmt_elfo32.c 2003-08-25 13:44:40.000000000 +0200
-+++ linux-mips/arch/mips64/kernel/binfmt_elfo32.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips64/kernel/binfmt_elfo32.c 2005-01-26 03:40:47.000000000 +0100
@@ -137,4 +137,7 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
diff -Nur linux-2.4.29/arch/mips64/kernel/ioctl32.c linux-mips/arch/mips64/kernel/ioctl32.c
--- linux-2.4.29/arch/mips64/kernel/ioctl32.c 2005-01-19 15:09:31.000000000 +0100
-+++ linux-mips/arch/mips64/kernel/ioctl32.c 2005-01-31 12:59:30.000000000 +0100
++++ linux-mips/arch/mips64/kernel/ioctl32.c 2005-01-26 03:36:17.000000000 +0100
@@ -2352,7 +2352,7 @@
IOCTL32_HANDLER(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout),
IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE),
IOCTL32_DEFAULT(AUTOFS_IOC_ASKREGHOST),
IOCTL32_DEFAULT(AUTOFS_IOC_TOGGLEREGHOST),
IOCTL32_DEFAULT(AUTOFS_IOC_ASKUMOUNT),
-diff -Nur linux-2.4.29/arch/mips64/kernel/linux32.c linux-mips/arch/mips64/kernel/linux32.c
---- linux-2.4.29/arch/mips64/kernel/linux32.c 2005-01-19 15:09:32.000000000 +0100
-+++ linux-mips/arch/mips64/kernel/linux32.c 2005-03-26 11:47:18.669587634 +0100
-@@ -1088,11 +1088,9 @@
- i--;
- }
-
-- inode = file->f_dentry->d_inode;
- /* VERIFY_WRITE actually means a read, as we write to user space */
-- retval = locks_verify_area((type == VERIFY_WRITE
-- ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE),
-- inode, file, file->f_pos, tot_len);
-+ retval = rw_verify_area((type == VERIFY_WRITE ? READ : WRITE),
-+ file, &file->f_pos, tot_len);
- if (retval) {
- if (iov != iovstack)
- kfree(iov);
-@@ -1189,72 +1187,19 @@
- lseek back to original location. They fail just like lseek does on
- non-seekable files. */
-
--asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf,
-- size_t count, u32 unused, u64 a4, u64 a5)
-+asmlinkage ssize_t sys32_pread(unsigned int fd, char *buf,
-+ size_t count, u32 unused, u64 a4, u64 a5)
- {
-- ssize_t ret;
-- struct file * file;
-- ssize_t (*read)(struct file *, char *, size_t, loff_t *);
-- loff_t pos;
--
-- ret = -EBADF;
-- file = fget(fd);
-- if (!file)
-- goto bad_file;
-- if (!(file->f_mode & FMODE_READ))
-- goto out;
-- pos = merge_64(a4, a5);
-- ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode,
-- file, pos, count);
-- if (ret)
-- goto out;
-- ret = -EINVAL;
-- if (!file->f_op || !(read = file->f_op->read))
-- goto out;
-- if (pos < 0)
-- goto out;
-- ret = read(file, buf, count, &pos);
-- if (ret > 0)
-- dnotify_parent(file->f_dentry, DN_ACCESS);
--out:
-- fput(file);
--bad_file:
-- return ret;
-+ return sys_pread(fd, buf, count, merge_64(a4, a5));
- }
-
- asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf,
- size_t count, u32 unused, u64 a4, u64 a5)
- {
-- ssize_t ret;
-- struct file * file;
-- ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
-- loff_t pos;
-+ return sys_pwrite(fd, buf, count, merge_64(a4, a5));
-+}
-
-- ret = -EBADF;
-- file = fget(fd);
-- if (!file)
-- goto bad_file;
-- if (!(file->f_mode & FMODE_WRITE))
-- goto out;
-- pos = merge_64(a4, a5);
-- ret = locks_verify_area(FLOCK_VERIFY_WRITE, file->f_dentry->d_inode,
-- file, pos, count);
-- if (ret)
-- goto out;
-- ret = -EINVAL;
-- if (!file->f_op || !(write = file->f_op->write))
-- goto out;
-- if (pos < 0)
-- goto out;
-
-- ret = write(file, buf, count, &pos);
-- if (ret > 0)
-- dnotify_parent(file->f_dentry, DN_MODIFY);
--out:
-- fput(file);
--bad_file:
-- return ret;
--}
- /*
- * Ooo, nasty. We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
-@@ -2792,7 +2737,8 @@
- * IPV6_RTHDR ipv6 routing exthdr 32-bit clean
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
--static void cmsg32_recvmsg_fixup(struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+static void cmsg32_recvmsg_fixup(struct msghdr *kmsg,
-+ unsigned long orig_cmsg_uptr, __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -2823,6 +2769,9 @@
- __get_user(kcmsg32->cmsg_type, &ucmsg->cmsg_type);
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- copy_from_user(CMSG32_DATA(kcmsg32), CMSG_DATA(ucmsg),
- clen64 - CMSG_ALIGN(sizeof(*ucmsg)));
- clen32 = ((clen64 - CMSG_ALIGN(sizeof(*ucmsg))) +
-@@ -2908,6 +2857,7 @@
- struct sockaddr *uaddr;
- int *uaddr_len;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, total_len, len = 0;
-
- if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
-@@ -2923,6 +2873,7 @@
- total_len = err;
-
- cmsg_ptr = (unsigned long) kern_msg.msg_control;
-+ cmsg_len = kern_msg.msg_controllen;
- kern_msg.msg_flags = 0;
-
- sock = sockfd_lookup(fd, &err);
-@@ -2948,7 +2899,8 @@
- * to fix it up before we tack on more stuff.
- */
- if((unsigned long) kern_msg.msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(&kern_msg, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(&kern_msg,
-+ cmsg_ptr, cmsg_len);
-
- /* Wheee... */
- if(sock->passcred)
-diff -Nur linux-2.4.29/arch/mips64/kernel/scall_64.S linux-mips/arch/mips64/kernel/scall_64.S
---- linux-2.4.29/arch/mips64/kernel/scall_64.S 2005-01-19 15:09:32.000000000 +0100
-+++ linux-mips/arch/mips64/kernel/scall_64.S 2005-03-26 11:47:18.698582876 +0100
-@@ -102,15 +102,14 @@
+diff -Nur linux-2.4.29/arch/mips64/kernel/scall_64.S linux-mips/arch/mips64/kernel/scall_64.S
+--- linux-2.4.29/arch/mips64/kernel/scall_64.S 2005-01-19 15:09:32.000000000 +0100
++++ linux-mips/arch/mips64/kernel/scall_64.S 2005-02-07 22:21:54.000000000 +0100
+@@ -102,15 +102,14 @@
trace_a_syscall:
SAVE_STATIC
sltu t0, t0, v0
diff -Nur linux-2.4.29/arch/mips64/kernel/scall_n32.S linux-mips/arch/mips64/kernel/scall_n32.S
--- linux-2.4.29/arch/mips64/kernel/scall_n32.S 2005-01-19 15:09:32.000000000 +0100
-+++ linux-mips/arch/mips64/kernel/scall_n32.S 2005-03-26 11:47:18.734576968 +0100
++++ linux-mips/arch/mips64/kernel/scall_n32.S 2005-02-07 22:21:54.000000000 +0100
@@ -106,15 +106,14 @@
trace_a_syscall:
sltu t0, t0, v0
diff -Nur linux-2.4.29/arch/mips64/kernel/scall_o32.S linux-mips/arch/mips64/kernel/scall_o32.S
--- linux-2.4.29/arch/mips64/kernel/scall_o32.S 2005-01-19 15:09:32.000000000 +0100
-+++ linux-mips/arch/mips64/kernel/scall_o32.S 2005-03-26 11:47:18.788568107 +0100
++++ linux-mips/arch/mips64/kernel/scall_o32.S 2005-02-14 04:52:57.000000000 +0100
@@ -118,9 +118,8 @@
sd a6, PT_R10(sp)
sd a7, PT_R11(sp)
diff -Nur linux-2.4.29/arch/mips64/kernel/signal_n32.c linux-mips/arch/mips64/kernel/signal_n32.c
--- linux-2.4.29/arch/mips64/kernel/signal_n32.c 2005-01-19 15:09:33.000000000 +0100
-+++ linux-mips/arch/mips64/kernel/signal_n32.c 2005-03-26 11:47:18.811564333 +0100
++++ linux-mips/arch/mips64/kernel/signal_n32.c 2005-02-07 22:10:53.000000000 +0100
@@ -68,7 +68,7 @@
};
prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
diff -Nur linux-2.4.29/arch/mips64/mm/c-r4k.c linux-mips/arch/mips64/mm/c-r4k.c
--- linux-2.4.29/arch/mips64/mm/c-r4k.c 2005-01-19 15:09:33.000000000 +0100
-+++ linux-mips/arch/mips64/mm/c-r4k.c 2005-03-26 11:47:18.942542836 +0100
++++ linux-mips/arch/mips64/mm/c-r4k.c 2005-02-06 22:55:42.000000000 +0100
@@ -867,9 +867,16 @@
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
probe_tlb(config);
write_c0_pagemask(PM_DEFAULT_MASK);
write_c0_wired(0);
-diff -Nur linux-2.4.29/arch/parisc/kernel/sys_parisc32.c linux-mips/arch/parisc/kernel/sys_parisc32.c
---- linux-2.4.29/arch/parisc/kernel/sys_parisc32.c 2005-01-19 15:09:35.000000000 +0100
-+++ linux-mips/arch/parisc/kernel/sys_parisc32.c 2005-03-26 11:47:18.967538734 +0100
-@@ -1671,11 +1671,9 @@
- i--;
- }
-
-- inode = file->f_dentry->d_inode;
- /* VERIFY_WRITE actually means a read, as we write to user space */
-- retval = locks_verify_area((type == VERIFY_WRITE
-- ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE),
-- inode, file, file->f_pos, tot_len);
-+ retval = rw_verify_area((type == VERIFY_WRITE ? READ : WRITE),
-+ file, &file->f_pos, tot_len);
- if (retval) {
- if (iov != iovstack)
- kfree(iov);
-@@ -2108,7 +2106,8 @@
- * IPV6_RTHDR ipv6 routing exthdr 32-bit clean
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
--static void cmsg32_recvmsg_fixup(struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+static void cmsg32_recvmsg_fixup(struct msghdr *kmsg,
-+ unsigned long orig_cmsg_uptr, __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -2139,6 +2138,9 @@
- __get_user(kcmsg32->cmsg_type, &ucmsg->cmsg_type);
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- copy_from_user(CMSG32_DATA(kcmsg32), CMSG_DATA(ucmsg),
- clen64 - CMSG_ALIGN(sizeof(*ucmsg)));
- clen32 = ((clen64 - CMSG_ALIGN(sizeof(*ucmsg))) +
-@@ -2224,6 +2226,7 @@
- struct sockaddr *uaddr;
- int *uaddr_len;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, total_len, len = 0;
-
- if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
-@@ -2239,6 +2242,7 @@
- total_len = err;
-
- cmsg_ptr = (unsigned long) kern_msg.msg_control;
-+ cmsg_len = kern_msg.msg_controllen;
- kern_msg.msg_flags = 0;
-
- sock = sockfd_lookup(fd, &err);
-@@ -2264,7 +2268,8 @@
- * to fix it up before we tack on more stuff.
- */
- if((unsigned long) kern_msg.msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(&kern_msg, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(&kern_msg,
-+ cmsg_ptr, cmsg_len);
-
- /* Wheee... */
- if(sock->passcred)
-diff -Nur linux-2.4.29/arch/ppc/kernel/cputable.c linux-mips/arch/ppc/kernel/cputable.c
---- linux-2.4.29/arch/ppc/kernel/cputable.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/arch/ppc/kernel/cputable.c 2005-03-26 11:47:18.990534959 +0100
-@@ -480,8 +480,8 @@
- 32, 32,
- 0, /*__setup_cpu_440 */
- },
-- { /* 440GX Rev. B1 (2.1) */
-- 0xf0000fff, 0x50000852, "440GX Rev. B1 (2.1)",
-+ { /* 440GX Rev. C */
-+ 0xf0000fff, 0x50000892, "440GX Rev. C",
- CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
- PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
- 32, 32,
-diff -Nur linux-2.4.29/arch/ppc/kernel/head_8xx.S linux-mips/arch/ppc/kernel/head_8xx.S
---- linux-2.4.29/arch/ppc/kernel/head_8xx.S 2004-02-18 14:36:30.000000000 +0100
-+++ linux-mips/arch/ppc/kernel/head_8xx.S 2005-03-26 11:47:18.992534631 +0100
-@@ -338,13 +338,13 @@
- 3:
- lwz r21, 0(r20) /* Get the level 1 entry */
- rlwinm. r20, r21,0,0,19 /* Extract page descriptor page address */
-- beq 2f /* If zero, don't try to find a pte */
-
- /* We have a pte table, so load the MI_TWC with the attributes
- * for this "segment."
- */
- tophys(r21,r21)
- ori r21,r21,1 /* Set valid bit */
-+ beq- 2f /* If zero, don't try to find a pte */
- #ifdef CONFIG_8xx_CPU6
- li r3, 0x2b80
- stw r3, 12(r0)
-@@ -369,7 +369,7 @@
- * set. All other Linux PTE bits control the behavior
- * of the MMU.
- */
-- li r21, 0x00f0
-+2: li r21, 0x00f0
- rlwimi r20, r21, 0, 24, 28 /* Set 24-27, clear 28 */
-
- #ifdef CONFIG_8xx_CPU6
-@@ -388,15 +388,6 @@
- #endif
- rfi
-
--2: mfspr r20, M_TW /* Restore registers */
-- lwz r21, 0(r0)
-- mtcr r21
-- lwz r21, 4(r0)
--#ifdef CONFIG_8xx_CPU6
-- lwz r3, 8(r0)
--#endif
-- b InstructionAccess
--
- . = 0x1200
- DataStoreTLBMiss:
- #ifdef CONFIG_8xx_CPU6
-@@ -422,12 +413,12 @@
- 3:
- lwz r21, 0(r20) /* Get the level 1 entry */
- rlwinm. r20, r21,0,0,19 /* Extract page descriptor page address */
-- beq 2f /* If zero, don't try to find a pte */
-
- /* We have a pte table, so load fetch the pte from the table.
- */
- tophys(r21, r21)
- ori r21, r21, 1 /* Set valid bit in physical L2 page */
-+ beq- 2f /* If zero, don't try to find a pte */
- #ifdef CONFIG_8xx_CPU6
- li r3, 0x3b80
- stw r3, 12(r0)
-@@ -461,7 +452,7 @@
- * set. All other Linux PTE bits control the behavior
- * of the MMU.
- */
-- li r21, 0x00f0
-+2: li r21, 0x00f0
- rlwimi r20, r21, 0, 24, 28 /* Set 24-27, clear 28 */
-
- #ifdef CONFIG_8xx_CPU6
-@@ -480,24 +471,6 @@
- #endif
- rfi
-
--2:
-- /* Copy 20 msb from MD_EPN to DAR since the dcxx instructions fail
-- * to update DAR when they cause a DTLB miss.
-- */
-- mfspr r21, MD_EPN
-- mfspr r20, DAR
-- rlwimi r20, r21, 0, 0, 19
-- mtspr DAR, r20
--
-- mfspr r20, M_TW /* Restore registers */
-- lwz r21, 0(r0)
-- mtcr r21
-- lwz r21, 4(r0)
--#ifdef CONFIG_8xx_CPU6
-- lwz r3, 8(r0)
--#endif
-- b DataAccess
--
- /* This is an instruction TLB error on the MPC8xx. This could be due
- * to many reasons, such as executing guarded memory or illegal instruction
- * addresses. There is nothing to do but handle a big time error fault.
-diff -Nur linux-2.4.29/arch/ppc64/kernel/sys_ppc32.c linux-mips/arch/ppc64/kernel/sys_ppc32.c
---- linux-2.4.29/arch/ppc64/kernel/sys_ppc32.c 2005-01-19 15:09:37.000000000 +0100
-+++ linux-mips/arch/ppc64/kernel/sys_ppc32.c 2005-03-26 11:47:19.016530693 +0100
-@@ -183,11 +183,9 @@
- i--;
- }
-
-- inode = file->f_dentry->d_inode;
- /* VERIFY_WRITE actually means a read, as we write to user space */
-- retval = locks_verify_area((type == VERIFY_WRITE
-- ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE),
-- inode, file, file->f_pos, tot_len);
-+ retval = rw_verify_area((type == VERIFY_WRITE ? READ : WRITE),
-+ file, &file->f_pos, tot_len);
- if (retval) {
- if (iov != iovstack)
- kfree(iov);
-@@ -3666,7 +3664,8 @@
- * IPV6_RTHDR ipv6 routing exthdr 32-bit clean
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
--static void cmsg32_recvmsg_fixup(struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+static void cmsg32_recvmsg_fixup(struct msghdr *kmsg,
-+ unsigned long orig_cmsg_uptr, __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -3697,6 +3696,9 @@
- __get_user(kcmsg32->cmsg_type, &ucmsg->cmsg_type);
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- copy_from_user(CMSG32_DATA(kcmsg32), CMSG_DATA(ucmsg),
- clen64 - CMSG_ALIGN(sizeof(*ucmsg)));
- clen32 = ((clen64 - CMSG_ALIGN(sizeof(*ucmsg))) +
-@@ -3753,6 +3755,7 @@
- struct sockaddr *uaddr;
- int *uaddr_len;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, total_len, len = 0;
-
- PPCDBG(PPCDBG_SYS32, "sys32_recvmsg - entered - fd=%x, user_msg@=%p, user_flags=%x \n", fd, user_msg, user_flags);
-@@ -3770,6 +3773,7 @@
- total_len = err;
-
- cmsg_ptr = (unsigned long) kern_msg.msg_control;
-+ cmsg_len = kern_msg.msg_controllen;
- kern_msg.msg_flags = 0;
-
- sock = sockfd_lookup(fd, &err);
-@@ -3795,7 +3799,8 @@
- * to fix it up before we tack on more stuff.
- */
- if((unsigned long) kern_msg.msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(&kern_msg, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(&kern_msg,
-+ cmsg_ptr, cmsg_len);
-
- /* Wheee... */
- if(sock->passcred)
-diff -Nur linux-2.4.29/arch/s390x/kernel/linux32.c linux-mips/arch/s390x/kernel/linux32.c
---- linux-2.4.29/arch/s390x/kernel/linux32.c 2005-01-19 15:09:38.000000000 +0100
-+++ linux-mips/arch/s390x/kernel/linux32.c 2005-03-26 11:47:19.529446512 +0100
-@@ -1108,7 +1108,6 @@
- unsigned long tot_len;
- struct iovec iovstack[UIO_FASTIOV];
- struct iovec *iov=iovstack, *ivp;
-- struct inode *inode;
- long retval, i;
- io_fn_t fn;
- iov_fn_t fnv;
-@@ -1145,11 +1144,9 @@
- i--;
- }
-
-- inode = file->f_dentry->d_inode;
- /* VERIFY_WRITE actually means a read, as we write to user space */
-- retval = locks_verify_area((type == VERIFY_WRITE
-- ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE),
-- inode, file, file->f_pos, tot_len);
-+ retval = rw_verify_area((type == VERIFY_WRITE ? READ : WRITE),
-+ file, &file->f_pos, tot_len);
- if (retval)
- goto out;
-
-@@ -2600,7 +2597,8 @@
- * IPV6_RTHDR ipv6 routing exthdr 32-bit clean
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
--static void cmsg32_recvmsg_fixup(struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+static void cmsg32_recvmsg_fixup(struct msghdr *kmsg,
-+ unsigned long orig_cmsg_uptr, __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -2631,6 +2629,9 @@
- __get_user(kcmsg32->cmsg_type, &ucmsg->cmsg_type);
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- copy_from_user(CMSG32_DATA(kcmsg32), CMSG_DATA(ucmsg),
- clen64 - CMSG_ALIGN(sizeof(*ucmsg)));
- clen32 = ((clen64 - CMSG_ALIGN(sizeof(*ucmsg))) +
-@@ -2890,7 +2891,8 @@
-
- static __inline__ void
- scm_recv32(struct socket *sock, struct msghdr *msg,
-- struct scm_cookie *scm, int flags, unsigned long cmsg_ptr)
-+ struct scm_cookie *scm, int flags, unsigned long cmsg_ptr,
-+ __kernel_size_t cmsg_len)
- {
- if(!msg->msg_control)
- {
-@@ -2905,7 +2907,7 @@
- * to fix it up before we tack on more stuff.
- */
- if((unsigned long) msg->msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(msg, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(msg, cmsg_ptr, cmsg_len);
- /* Wheee... */
- if(sock->passcred)
- put_cmsg32(msg,
-@@ -2919,14 +2921,14 @@
-
- static int
- sock_recvmsg32(struct socket *sock, struct msghdr *msg, int size, int flags,
-- unsigned long cmsg_ptr)
-+ unsigned long cmsg_ptr, __kernel_size_t cmsg_len)
- {
- struct scm_cookie scm;
-
- memset(&scm, 0, sizeof(scm));
- size = sock->ops->recvmsg(sock, msg, size, flags, &scm);
- if (size >= 0)
-- scm_recv32(sock, msg, &scm, flags, cmsg_ptr);
-+ scm_recv32(sock, msg, &scm, flags, cmsg_ptr, cmsg_len);
-
- return size;
- }
-@@ -2943,6 +2945,7 @@
- struct iovec *iov=iovstack;
- struct msghdr msg_sys;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, iov_size, total_len, len;
-
- /* kernel mode address */
-@@ -2986,11 +2989,12 @@
- total_len=err;
-
- cmsg_ptr = (unsigned long)msg_sys.msg_control;
-+ cmsg_len = msg_sys.msg_controllen;
- msg_sys.msg_flags = 0;
-
- if (sock->file->f_flags & O_NONBLOCK)
- flags |= MSG_DONTWAIT;
-- err = sock_recvmsg32(sock, &msg_sys, total_len, flags, cmsg_ptr);
-+ err = sock_recvmsg32(sock, &msg_sys, total_len, flags, cmsg_ptr, cmsg_len);
- if (err < 0)
- goto out_freeiov;
- len = err;
-diff -Nur linux-2.4.29/arch/sparc/kernel/muldiv.c linux-mips/arch/sparc/kernel/muldiv.c
---- linux-2.4.29/arch/sparc/kernel/muldiv.c 1998-01-13 00:15:43.000000000 +0100
-+++ linux-mips/arch/sparc/kernel/muldiv.c 2005-03-26 11:47:19.631429774 +0100
-@@ -4,6 +4,9 @@
- *
- * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-+ *
-+ * 2004-12-25 Krzysztof Helt (krzysztof.h1@wp.pl)
-+ * - fixed registers constrains in inline assembly declarations
- */
-
- #include <linux/kernel.h>
-@@ -125,7 +128,7 @@
- "mov %%o0, %0\n\t"
- "mov %%o1, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
-- :
-+ : "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7", "cc");
- #ifdef DEBUG_MULDIV
- printk ("0x%x%08x\n", rs2, rs1);
-@@ -145,7 +148,7 @@
- "mov %%o0, %0\n\t"
- "mov %%o1, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
-- :
-+ : "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7", "cc");
- #ifdef DEBUG_MULDIV
- printk ("0x%x%08x\n", rs2, rs1);
-@@ -174,7 +177,7 @@
- "mov %%o1, %0\n\t"
- "mov %%o0, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
-- : "r" (regs->y)
-+ : "r" (regs->y), "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "cc");
- #ifdef DEBUG_MULDIV
-@@ -203,7 +206,7 @@
- "mov %%o1, %0\n\t"
- "mov %%o0, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
-- : "r" (regs->y)
-+ : "r" (regs->y), "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "cc");
- #ifdef DEBUG_MULDIV
-diff -Nur linux-2.4.29/arch/sparc/kernel/process.c linux-mips/arch/sparc/kernel/process.c
---- linux-2.4.29/arch/sparc/kernel/process.c 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/arch/sparc/kernel/process.c 2005-03-26 11:47:19.632429610 +0100
-@@ -512,6 +512,11 @@
- }
- }
-
-+#ifdef CONFIG_SMP
-+ /* FPU must be disabled on SMP. */
-+ childregs->psr &= ~PSR_EF;
-+#endif
-+
- /* Set the return value for the child. */
- childregs->u_regs[UREG_I0] = current->pid;
- childregs->u_regs[UREG_I1] = 1;
-diff -Nur linux-2.4.29/arch/sparc64/kernel/ioctl32.c linux-mips/arch/sparc64/kernel/ioctl32.c
---- linux-2.4.29/arch/sparc64/kernel/ioctl32.c 2005-01-19 15:09:39.000000000 +0100
-+++ linux-mips/arch/sparc64/kernel/ioctl32.c 2005-03-26 11:47:19.641428133 +0100
-@@ -562,6 +562,8 @@
-
- if (!(current->thread.flags & SPARC_FLAG_32BIT))
- usp += STACK_BIAS;
-+ else
-+ usp &= 0xffffffffUL;
-
- return (void *) (usp - len);
- }
-@@ -696,6 +698,7 @@
- set_fs (old_fs);
- if (!err) {
- switch (cmd) {
-+ case TUNSETIFF:
- case SIOCGIFFLAGS:
- case SIOCGIFMETRIC:
- case SIOCGIFMTU:
-diff -Nur linux-2.4.29/arch/sparc64/kernel/pci_schizo.c linux-mips/arch/sparc64/kernel/pci_schizo.c
---- linux-2.4.29/arch/sparc64/kernel/pci_schizo.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/arch/sparc64/kernel/pci_schizo.c 2005-03-26 11:47:19.646427312 +0100
-@@ -388,9 +388,9 @@
- return ret;
- }
-
--static unsigned int __init schizo_irq_build(struct pci_pbm_info *pbm,
-- struct pci_dev *pdev,
-- unsigned int ino)
-+static unsigned int schizo_irq_build(struct pci_pbm_info *pbm,
-+ struct pci_dev *pdev,
-+ unsigned int ino)
- {
- struct ino_bucket *bucket;
- unsigned long imap, iclr;
-@@ -444,19 +444,57 @@
- static unsigned long stc_tag_buf[16];
- static unsigned long stc_line_buf[16];
-
--/* These offsets look weird because I keep in pbm->controller_regs
-- * the second PROM register property minus 0x10000 which is the
-- * base of the Safari and UPA64S registers of SCHIZO.
-- */
--#define SCHIZO_PBM_A_REGS_OFF (0x600000UL - 0x400000UL)
--#define SCHIZO_PBM_B_REGS_OFF (0x700000UL - 0x400000UL)
-+#define SCHIZO_UE_INO 0x30 /* Uncorrectable ECC error */
-+#define SCHIZO_CE_INO 0x31 /* Correctable ECC error */
-+#define SCHIZO_PCIERR_A_INO 0x32 /* PBM A PCI bus error */
-+#define SCHIZO_PCIERR_B_INO 0x33 /* PBM B PCI bus error */
-+#define SCHIZO_SERR_INO 0x34 /* Safari interface error */
-+
-+struct pci_pbm_info *pbm_for_ino(struct pci_controller_info *p, u32 ino)
-+{
-+ ino &= IMAP_INO;
-+ if (p->pbm_A.ino_bitmap & (1UL << ino))
-+ return &p->pbm_A;
-+ if (p->pbm_B.ino_bitmap & (1UL << ino))
-+ return &p->pbm_B;
-+
-+ printk("PCI%d: No ino_bitmap entry for ino[%x], bitmaps "
-+ "PBM_A[%016lx] PBM_B[%016lx]",
-+ p->index, ino,
-+ p->pbm_A.ino_bitmap,
-+ p->pbm_B.ino_bitmap);
-+ printk("PCI%d: Using PBM_A, report this problem immediately.\n",
-+ p->index);
-+
-+ return &p->pbm_A;
-+}
-
--static void schizo_clear_other_err_intr(int irq)
-+static void schizo_clear_other_err_intr(struct pci_controller_info *p, int irq)
- {
-- struct ino_bucket *bucket = __bucket(irq);
-- unsigned long iclr = bucket->iclr;
-+ struct pci_pbm_info *pbm;
-+ struct ino_bucket *bucket;
-+ unsigned long iclr;
-+
-+ /* Do not clear the interrupt for the other PCI bus.
-+ *
-+ * This "ACK both PBM IRQs" only needs to be performed
-+ * for chip-wide error interrupts.
-+ */
-+ if ((irq & IMAP_INO) == SCHIZO_PCIERR_A_INO ||
-+ (irq & IMAP_INO) == SCHIZO_PCIERR_B_INO)
-+ return;
-+
-+ pbm = pbm_for_ino(p, irq);
-+ if (pbm == &p->pbm_A)
-+ pbm = &p->pbm_B;
-+ else
-+ pbm = &p->pbm_A;
-+
-+ irq = schizo_irq_build(pbm, NULL,
-+ (pbm->portid << 6) | (irq & IMAP_INO));
-+ bucket = __bucket(irq);
-+ iclr = bucket->iclr;
-
-- iclr += (SCHIZO_PBM_B_REGS_OFF - SCHIZO_PBM_A_REGS_OFF);
- upa_writel(ICLR_IDLE, iclr);
- }
-
-@@ -790,7 +828,7 @@
- /* Interrogate IOMMU for error status. */
- schizo_check_iommu_error(p, UE_ERR);
-
-- schizo_clear_other_err_intr(irq);
-+ schizo_clear_other_err_intr(p, irq);
- }
-
- #define SCHIZO_CE_AFSR 0x10040UL
-@@ -879,7 +917,7 @@
- printk("(none)");
- printk("]\n");
-
-- schizo_clear_other_err_intr(irq);
-+ schizo_clear_other_err_intr(p, irq);
- }
-
- #define SCHIZO_PCI_AFSR 0x2010UL
-@@ -914,9 +952,9 @@
- #define SCHIZO_PCICTRL_SBH_ERR (1UL << 35UL) /* Safari */
- #define SCHIZO_PCICTRL_SERR (1UL << 34UL) /* Safari/Tomatillo */
- #define SCHIZO_PCICTRL_PCISPD (1UL << 33UL) /* Safari */
--#define SCHIZO_PCICTRL_MRM_PREF (1UL << 28UL) /* Tomatillo */
--#define SCHIZO_PCICTRL_RDO_PREF (1UL << 27UL) /* Tomatillo */
--#define SCHIZO_PCICTRL_RDL_PREF (1UL << 26UL) /* Tomatillo */
-+#define SCHIZO_PCICTRL_MRM_PREF (1UL << 30UL) /* Tomatillo */
-+#define SCHIZO_PCICTRL_RDO_PREF (1UL << 29UL) /* Tomatillo */
-+#define SCHIZO_PCICTRL_RDL_PREF (1UL << 28UL) /* Tomatillo */
- #define SCHIZO_PCICTRL_PTO (3UL << 24UL) /* Safari/Tomatillo */
- #define SCHIZO_PCICTRL_PTO_SHIFT 24UL
- #define SCHIZO_PCICTRL_TRWSW (7UL << 21UL) /* Tomatillo */
-@@ -1094,7 +1132,7 @@
- if (error_bits & (SCHIZO_PCIAFSR_PPERR | SCHIZO_PCIAFSR_SPERR))
- pci_scan_for_parity_error(p, pbm, pbm->pci_bus);
-
-- schizo_clear_other_err_intr(irq);
-+ schizo_clear_other_err_intr(p, irq);
- }
-
- #define SCHIZO_SAFARI_ERRLOG 0x10018UL
-@@ -1149,7 +1187,7 @@
- printk("PCI%d: Unexpected Safari/JBUS error interrupt, errlog[%016lx]\n",
- p->index, errlog);
-
-- schizo_clear_other_err_intr(irq);
-+ schizo_clear_other_err_intr(p, irq);
- return;
- }
-
-@@ -1157,7 +1195,7 @@
- p->index);
- schizo_check_iommu_error(p, SAFARI_ERR);
-
-- schizo_clear_other_err_intr(irq);
-+ schizo_clear_other_err_intr(p, irq);
- }
-
- /* Nearly identical to PSYCHO equivalents... */
-@@ -1171,26 +1209,6 @@
- #define SCHIZO_SAFARI_IRQCTRL 0x10010UL
- #define SCHIZO_SAFIRQCTRL_EN 0x8000000000000000UL
-
--#define SCHIZO_UE_INO 0x30 /* Uncorrectable ECC error */
--#define SCHIZO_CE_INO 0x31 /* Correctable ECC error */
--#define SCHIZO_PCIERR_A_INO 0x32 /* PBM A PCI bus error */
--#define SCHIZO_PCIERR_B_INO 0x33 /* PBM B PCI bus error */
--#define SCHIZO_SERR_INO 0x34 /* Safari interface error */
--
--struct pci_pbm_info *pbm_for_ino(struct pci_controller_info *p, u32 ino)
--{
-- ino &= IMAP_INO;
-- if (p->pbm_A.ino_bitmap & (1UL << ino))
-- return &p->pbm_A;
-- if (p->pbm_B.ino_bitmap & (1UL << ino))
-- return &p->pbm_B;
-- prom_printf("TOMATILLO%d: No entry in ino bitmap for %d\n",
-- p->index, ino);
-- prom_halt();
-- /* NOTREACHED */
-- return NULL;
--}
--
- /* How the Tomatillo IRQs are routed around is pure guesswork here.
- *
- * All the Tomatillo devices I see in prtconf dumps seem to have only
-@@ -1964,7 +1982,7 @@
-
- tmp &= ~SCHIZO_PCICTRL_PTO;
- if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO &&
-- pbm->chip_version == 0x2)
-+ pbm->chip_version >= 0x2)
- tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT;
- else
- tmp |= 0x1UL << SCHIZO_PCICTRL_PTO_SHIFT;
-@@ -1972,8 +1990,16 @@
- if (!prom_getbool(pbm->prom_node, "no-bus-parking"))
- tmp |= SCHIZO_PCICTRL_PARK;
-
-+ if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO &&
-+ pbm->chip_version <= 0x1)
-+ tmp |= (1UL << 61);
-+ else
-+ tmp &= ~(1UL << 61);
-+
- if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO)
-- tmp |= SCHIZO_PCICTRL_MRM_PREF;
-+ tmp |= (SCHIZO_PCICTRL_MRM_PREF |
-+ SCHIZO_PCICTRL_RDO_PREF |
-+ SCHIZO_PCICTRL_RDL_PREF);
-
- schizo_write(pbm->pbm_regs + SCHIZO_PCI_CTRL, tmp);
-
-diff -Nur linux-2.4.29/arch/sparc64/kernel/smp.c linux-mips/arch/sparc64/kernel/smp.c
---- linux-2.4.29/arch/sparc64/kernel/smp.c 2005-01-19 15:09:39.000000000 +0100
-+++ linux-mips/arch/sparc64/kernel/smp.c 2005-03-26 11:47:19.647427148 +0100
-@@ -1034,7 +1034,7 @@
- void smp_capture(void)
- {
- if (smp_processors_ready) {
-- int result = __atomic_add(1, &smp_capture_depth);
-+ int result = atomic_add_ret(1, &smp_capture_depth);
-
- membar("#StoreStore | #LoadStore");
- if (result == 1) {
-diff -Nur linux-2.4.29/arch/sparc64/kernel/sparc64_ksyms.c linux-mips/arch/sparc64/kernel/sparc64_ksyms.c
---- linux-2.4.29/arch/sparc64/kernel/sparc64_ksyms.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/arch/sparc64/kernel/sparc64_ksyms.c 2005-03-26 11:47:19.648426984 +0100
-@@ -173,18 +173,21 @@
- EXPORT_SYMBOL(__up);
-
- /* Atomic counter implementation. */
--EXPORT_SYMBOL(__atomic_add);
--EXPORT_SYMBOL(__atomic_sub);
-+EXPORT_SYMBOL(atomic_add);
-+EXPORT_SYMBOL(atomic_add_ret);
-+EXPORT_SYMBOL(atomic_sub);
-+EXPORT_SYMBOL(atomic_sub_ret);
- #ifdef CONFIG_SMP
- EXPORT_SYMBOL(atomic_dec_and_lock);
- #endif
-
- /* Atomic bit operations. */
--EXPORT_SYMBOL(___test_and_set_bit);
--EXPORT_SYMBOL(___test_and_clear_bit);
--EXPORT_SYMBOL(___test_and_change_bit);
--EXPORT_SYMBOL(___test_and_set_le_bit);
--EXPORT_SYMBOL(___test_and_clear_le_bit);
-+EXPORT_SYMBOL(test_and_set_bit);
-+EXPORT_SYMBOL(test_and_clear_bit);
-+EXPORT_SYMBOL(test_and_change_bit);
-+EXPORT_SYMBOL(set_bit);
-+EXPORT_SYMBOL(clear_bit);
-+EXPORT_SYMBOL(change_bit);
-
- EXPORT_SYMBOL(ivector_table);
- EXPORT_SYMBOL(enable_irq);
-diff -Nur linux-2.4.29/arch/sparc64/kernel/sys_sparc32.c linux-mips/arch/sparc64/kernel/sys_sparc32.c
---- linux-2.4.29/arch/sparc64/kernel/sys_sparc32.c 2005-01-19 15:09:39.000000000 +0100
-+++ linux-mips/arch/sparc64/kernel/sys_sparc32.c 2005-03-26 11:47:19.669423538 +0100
-@@ -505,25 +505,32 @@
- return err;
- }
-
--static int do_sys32_msgsnd (int first, int second, int third, void *uptr)
-+static int do_sys32_msgsnd(int first, int second, int third, void *uptr)
- {
-- struct msgbuf *p = kmalloc (second + sizeof (struct msgbuf), GFP_USER);
-- struct msgbuf32 *up = (struct msgbuf32 *)uptr;
-+ struct msgbuf *p;
-+ struct msgbuf32 *up;
- mm_segment_t old_fs;
- int err;
-
-+ if (second < 0)
-+ return -EINVAL;
-+
-+ p = kmalloc(second + sizeof (struct msgbuf), GFP_USER);
- if (!p)
- return -ENOMEM;
-+
-+ up = (struct msgbuf32 *)uptr;
- err = -EFAULT;
-- if (get_user (p->mtype, &up->mtype) ||
-- __copy_from_user (p->mtext, &up->mtext, second))
-+ if (get_user(p->mtype, &up->mtype) ||
-+ __copy_from_user(p->mtext, up->mtext, second))
- goto out;
-- old_fs = get_fs ();
-- set_fs (KERNEL_DS);
-- err = sys_msgsnd (first, p, second, third);
-- set_fs (old_fs);
-+
-+ old_fs = get_fs();
-+ set_fs(KERNEL_DS);
-+ err = sys_msgsnd(first, p, second, third);
-+ set_fs(old_fs);
- out:
-- kfree (p);
-+ kfree(p);
- return err;
- }
-
-@@ -535,6 +542,9 @@
- mm_segment_t old_fs;
- int err;
-
-+ if (second < 0)
-+ return -EINVAL;
-+
- if (!version) {
- struct ipc_kludge *uipck = (struct ipc_kludge *)uptr;
- struct ipc_kludge ipck;
-@@ -560,7 +570,7 @@
- goto free_then_out;
- up = (struct msgbuf32 *)uptr;
- if (put_user (p->mtype, &up->mtype) ||
-- __copy_to_user (&up->mtext, p->mtext, err))
-+ __copy_to_user (up->mtext, p->mtext, err))
- err = -EFAULT;
- free_then_out:
- kfree (p);
-@@ -647,18 +657,18 @@
- return err;
- }
-
--static int do_sys32_shmat (int first, int second, int third, int version, void *uptr)
-+static int do_sys32_shmat(int first, int second, u32 third, int version, void *uptr)
- {
- unsigned long raddr;
-- u32 *uaddr = (u32 *)A((u32)third);
-+ u32 *uaddr = (u32 *)A(third);
- int err = -EINVAL;
-
- if (version == 1)
- goto out;
-- err = sys_shmat (first, uptr, second, &raddr);
-+ err = sys_shmat(first, uptr, second, &raddr);
- if (err)
- goto out;
-- err = put_user (raddr, uaddr);
-+ err = put_user(raddr, uaddr);
- out:
- return err;
- }
-@@ -770,6 +780,8 @@
-
- if (!(current->thread.flags & SPARC_FLAG_32BIT))
- usp += STACK_BIAS;
-+ else
-+ usp &= 0xffffffffUL;
-
- return (void *) (usp - len);
- }
-@@ -795,9 +807,11 @@
- return sys_semtimedop(semid, tsems, nsems, t64);
- }
-
--asmlinkage int sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
-+asmlinkage int sys32_ipc (u32 call, u32 first, u32 second, u32 third, s32 __ptr, s32 __fifth)
- {
- int version, err;
-+ u32 ptr = (u32) __ptr;
-+ u32 fifth = (u32) __fifth;
-
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-@@ -806,15 +820,23 @@
- switch (call) {
- case SEMOP:
- /* struct sembuf is the same on 32 and 64bit :)) */
-- err = sys_semtimedop (first, (struct sembuf *)AA(ptr), second, NULL);
-+ err = sys_semtimedop((int)first,
-+ (struct sembuf *)A(ptr),
-+ second, NULL);
- goto out;
- case SEMTIMEDOP:
-- err = sys32_semtimedop (first, (struct sembuf *)AA(ptr), second, (const struct timespec32 *) AA(fifth));
-+ err = sys32_semtimedop((int)first,
-+ (struct sembuf *)A(ptr),
-+ second,
-+ (const struct timespec32 *)
-+ A(third));
- case SEMGET:
-- err = sys_semget (first, second, third);
-+ err = sys_semget((key_t)first, (int)second,
-+ (int)third);
- goto out;
- case SEMCTL:
-- err = do_sys32_semctl (first, second, third, (void *)AA(ptr));
-+ err = do_sys32_semctl((int)first, (int)second,
-+ (int)third, (void *) A(ptr));
- goto out;
- default:
- err = -ENOSYS;
-@@ -823,17 +845,20 @@
- if (call <= MSGCTL)
- switch (call) {
- case MSGSND:
-- err = do_sys32_msgsnd (first, second, third, (void *)AA(ptr));
-+ err = do_sys32_msgsnd((int)first, (int)second,
-+ (int)third, (void *)A(ptr));
- goto out;
- case MSGRCV:
-- err = do_sys32_msgrcv (first, second, fifth, third,
-- version, (void *)AA(ptr));
-+ err = do_sys32_msgrcv((int)first, (int)second,
-+ (int)fifth, (int)third,
-+ version, (void *)A(ptr));
- goto out;
- case MSGGET:
-- err = sys_msgget ((key_t) first, second);
-+ err = sys_msgget((key_t)first, (int)second);
- goto out;
- case MSGCTL:
-- err = do_sys32_msgctl (first, second, (void *)AA(ptr));
-+ err = do_sys32_msgctl((int)first, (int)second,
-+ (void *)A(ptr));
- goto out;
- default:
- err = -ENOSYS;
-@@ -842,17 +867,18 @@
- if (call <= SHMCTL)
- switch (call) {
- case SHMAT:
-- err = do_sys32_shmat (first, second, third,
-- version, (void *)AA(ptr));
-+ err = do_sys32_shmat((int)first, (int)second, third,
-+ version, (void *)A(ptr));
- goto out;
- case SHMDT:
-- err = sys_shmdt ((char *)AA(ptr));
-+ err = sys_shmdt((char *)A(ptr));
- goto out;
- case SHMGET:
-- err = sys_shmget (first, second, third);
-+ err = sys_shmget((key_t)first, second, (int)third);
- goto out;
- case SHMCTL:
-- err = do_sys32_shmctl (first, second, (void *)AA(ptr));
-+ err = do_sys32_shmctl((int)first, (int)second,
-+ (void *)A(ptr));
- goto out;
- default:
- err = -ENOSYS;
-@@ -1093,7 +1119,6 @@
- __kernel_ssize_t32 tot_len;
- struct iovec iovstack[UIO_FASTIOV];
- struct iovec *iov=iovstack, *ivp;
-- struct inode *inode;
- long retval, i;
- io_fn_t fn;
- iov_fn_t fnv;
-@@ -1140,11 +1165,9 @@
- i--;
- }
-
-- inode = file->f_dentry->d_inode;
- /* VERIFY_WRITE actually means a read, as we write to user space */
-- retval = locks_verify_area((type == VERIFY_WRITE
-- ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE),
-- inode, file, file->f_pos, tot_len);
-+ retval = rw_verify_area((type == VERIFY_WRITE ? READ : WRITE),
-+ file, &file->f_pos, tot_len);
- if (retval)
- goto out;
-
-@@ -2160,9 +2183,6 @@
- timeout = (timespec_to_jiffies(&ts)
- + (ts.tv_sec || ts.tv_nsec));
-
-- current->state = TASK_INTERRUPTIBLE;
-- timeout = schedule_timeout(timeout);
--
- if (timeout) {
- /* None ready -- temporarily unblock those we're
- * interested while we are sleeping in so that we'll
-@@ -2648,7 +2668,8 @@
- * IPV6_RTHDR ipv6 routing exthdr 32-bit clean
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
--static void cmsg32_recvmsg_fixup(struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+static void cmsg32_recvmsg_fixup(struct msghdr *kmsg,
-+ unsigned long orig_cmsg_uptr, __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -2679,6 +2700,9 @@
- __get_user(kcmsg32->cmsg_type, &ucmsg->cmsg_type);
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- if (kcmsg32->cmsg_level == SOL_SOCKET &&
- kcmsg32->cmsg_type == SO_TIMESTAMP) {
- struct timeval tv;
-@@ -2782,6 +2806,7 @@
- struct sockaddr *uaddr;
- int *uaddr_len;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, total_len, len = 0;
-
- if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
-@@ -2797,6 +2822,7 @@
- total_len = err;
-
- cmsg_ptr = (unsigned long) kern_msg.msg_control;
-+ cmsg_len = kern_msg.msg_controllen;
- kern_msg.msg_flags = 0;
-
- sock = sockfd_lookup(fd, &err);
-@@ -2822,7 +2848,8 @@
- * to fix it up before we tack on more stuff.
- */
- if((unsigned long) kern_msg.msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(&kern_msg, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(&kern_msg,
-+ cmsg_ptr, cmsg_len);
-
- /* Wheee... */
- if(sock->passcred)
-diff -Nur linux-2.4.29/arch/sparc64/kernel/time.c linux-mips/arch/sparc64/kernel/time.c
---- linux-2.4.29/arch/sparc64/kernel/time.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/arch/sparc64/kernel/time.c 2005-03-26 11:47:19.670423374 +0100
-@@ -770,6 +770,7 @@
- strcmp(model, "mk48t59") &&
- strcmp(model, "m5819") &&
- strcmp(model, "m5819p") &&
-+ strcmp(model, "m5823") &&
- strcmp(model, "ds1287")) {
- if (cbus != NULL) {
- prom_printf("clock_probe: Central bus lacks timer chip.\n");
-@@ -829,7 +830,8 @@
-
- if (!strcmp(model, "ds1287") ||
- !strcmp(model, "m5819") ||
-- !strcmp(model, "m5819p")) {
-+ !strcmp(model, "m5819p") ||
-+ !strcmp(model, "m5823")) {
- ds1287_regs = edev->resource[0].start;
- } else {
- mstk48t59_regs = edev->resource[0].start;
-@@ -850,7 +852,8 @@
- }
- if (!strcmp(model, "ds1287") ||
- !strcmp(model, "m5819") ||
-- !strcmp(model, "m5819p")) {
-+ !strcmp(model, "m5819p") ||
-+ !strcmp(model, "m5823")) {
- ds1287_regs = isadev->resource.start;
- } else {
- mstk48t59_regs = isadev->resource.start;
-diff -Nur linux-2.4.29/arch/sparc64/lib/atomic.S linux-mips/arch/sparc64/lib/atomic.S
---- linux-2.4.29/arch/sparc64/lib/atomic.S 2001-12-21 18:41:53.000000000 +0100
-+++ linux-mips/arch/sparc64/lib/atomic.S 2005-03-26 11:47:19.671423210 +0100
-@@ -4,33 +4,83 @@
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
- */
-
-+#include <linux/config.h>
- #include <asm/asi.h>
-
-+ /* On SMP we need to use memory barriers to ensure
-+ * correct memory operation ordering, nop these out
-+ * for uniprocessor.
-+ */
-+#ifdef CONFIG_SMP
-+#define ATOMIC_PRE_BARRIER membar #StoreLoad | #LoadLoad
-+#define ATOMIC_POST_BARRIER membar #StoreLoad | #StoreStore
-+#else
-+#define ATOMIC_PRE_BARRIER nop
-+#define ATOMIC_POST_BARRIER nop
-+#endif
-+
- .text
-- .align 64
-
- .globl atomic_impl_begin, atomic_impl_end
--
-- .globl __atomic_add
- atomic_impl_begin:
--__atomic_add: /* %o0 = increment, %o1 = atomic_ptr */
-- lduw [%o1], %g5
-+ /* Two versions of the atomic routines, one that
-+ * does not return a value and does not perform
-+ * memory barriers, and a second which returns
-+ * a value and does the barriers.
-+ */
-+ .globl atomic_add
-+ .type atomic_add,#function
-+atomic_add: /* %o0 = increment, %o1 = atomic_ptr */
-+1: lduw [%o1], %g5
-+ add %g5, %o0, %g7
-+ cas [%o1], %g5, %g7
-+ cmp %g5, %g7
-+ bne,pn %icc, 1b
-+ nop
-+ retl
-+ nop
-+ .size atomic_add, .-atomic_add
-+
-+ .globl atomic_sub
-+ .type atomic_sub,#function
-+atomic_sub: /* %o0 = decrement, %o1 = atomic_ptr */
-+1: lduw [%o1], %g5
-+ sub %g5, %o0, %g7
-+ cas [%o1], %g5, %g7
-+ cmp %g5, %g7
-+ bne,pn %icc, 1b
-+ nop
-+ retl
-+ nop
-+ .size atomic_sub, .-atomic_sub
-+
-+ .globl atomic_add_ret
-+ .type atomic_add_ret,#function
-+atomic_add_ret: /* %o0 = increment, %o1 = atomic_ptr */
-+ ATOMIC_PRE_BARRIER
-+1: lduw [%o1], %g5
- add %g5, %o0, %g7
- cas [%o1], %g5, %g7
- cmp %g5, %g7
-- bne,pn %icc, __atomic_add
-- membar #StoreLoad | #StoreStore
-+ bne,pn %icc, 1b
-+ add %g7, %o0, %g7
-+ ATOMIC_POST_BARRIER
- retl
-- add %g7, %o0, %o0
-+ sra %g7, 0, %o0
-+ .size atomic_add_ret, .-atomic_add_ret
-
-- .globl __atomic_sub
--__atomic_sub: /* %o0 = increment, %o1 = atomic_ptr */
-- lduw [%o1], %g5
-+ .globl atomic_sub_ret
-+ .type atomic_sub_ret,#function
-+atomic_sub_ret: /* %o0 = decrement, %o1 = atomic_ptr */
-+ ATOMIC_PRE_BARRIER
-+1: lduw [%o1], %g5
- sub %g5, %o0, %g7
- cas [%o1], %g5, %g7
- cmp %g5, %g7
-- bne,pn %icc, __atomic_sub
-- membar #StoreLoad | #StoreStore
-+ bne,pn %icc, 1b
-+ sub %g7, %o0, %g7
-+ ATOMIC_POST_BARRIER
- retl
-- sub %g7, %o0, %o0
-+ sra %g7, 0, %o0
-+ .size atomic_sub_ret, .-atomic_sub_ret
- atomic_impl_end:
-diff -Nur linux-2.4.29/arch/sparc64/lib/bitops.S linux-mips/arch/sparc64/lib/bitops.S
---- linux-2.4.29/arch/sparc64/lib/bitops.S 2001-12-21 18:41:53.000000000 +0100
-+++ linux-mips/arch/sparc64/lib/bitops.S 2005-03-26 11:47:19.683421241 +0100
-@@ -4,107 +4,149 @@
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- */
-
-+#include <linux/config.h>
- #include <asm/asi.h>
-
-+ /* On SMP we need to use memory barriers to ensure
-+ * correct memory operation ordering, nop these out
-+ * for uniprocessor.
-+ */
-+#ifdef CONFIG_SMP
-+#define BITOP_PRE_BARRIER membar #StoreLoad | #LoadLoad
-+#define BITOP_POST_BARRIER membar #StoreLoad | #StoreStore
-+#else
-+#define BITOP_PRE_BARRIER nop
-+#define BITOP_POST_BARRIER nop
-+#endif
-+
- .text
-- .align 64
-+
- .globl __bitops_begin
- __bitops_begin:
-
-- .globl ___test_and_set_bit
--___test_and_set_bit: /* %o0=nr, %o1=addr */
-+
-+ .globl test_and_set_bit
-+ .type test_and_set_bit,#function
-+test_and_set_bit: /* %o0=nr, %o1=addr */
-+ BITOP_PRE_BARRIER
- srlx %o0, 6, %g1
- mov 1, %g5
- sllx %g1, 3, %g3
- and %o0, 63, %g2
- sllx %g5, %g2, %g5
- add %o1, %g3, %o1
-- ldx [%o1], %g7
--1: andcc %g7, %g5, %o0
-- bne,pn %xcc, 2f
-- xor %g7, %g5, %g1
-+1: ldx [%o1], %g7
-+ or %g7, %g5, %g1
- casx [%o1], %g7, %g1
- cmp %g7, %g1
-- bne,a,pn %xcc, 1b
-- ldx [%o1], %g7
--2: retl
-- membar #StoreLoad | #StoreStore
--
-- .globl ___test_and_clear_bit
--___test_and_clear_bit: /* %o0=nr, %o1=addr */
-+ bne,pn %xcc, 1b
-+ and %g7, %g5, %g2
-+ BITOP_POST_BARRIER
-+ clr %o0
-+ retl
-+ movrne %g2, 1, %o0
-+ .size test_and_set_bit, .-test_and_set_bit
-+
-+ .globl test_and_clear_bit
-+ .type test_and_clear_bit,#function
-+test_and_clear_bit: /* %o0=nr, %o1=addr */
-+ BITOP_PRE_BARRIER
- srlx %o0, 6, %g1
- mov 1, %g5
- sllx %g1, 3, %g3
- and %o0, 63, %g2
- sllx %g5, %g2, %g5
- add %o1, %g3, %o1
-- ldx [%o1], %g7
--1: andcc %g7, %g5, %o0
-- be,pn %xcc, 2f
-- xor %g7, %g5, %g1
-+1: ldx [%o1], %g7
-+ andn %g7, %g5, %g1
- casx [%o1], %g7, %g1
- cmp %g7, %g1
-- bne,a,pn %xcc, 1b
-- ldx [%o1], %g7
--2: retl
-- membar #StoreLoad | #StoreStore
--
-- .globl ___test_and_change_bit
--___test_and_change_bit: /* %o0=nr, %o1=addr */
-+ bne,pn %xcc, 1b
-+ and %g7, %g5, %g2
-+ BITOP_POST_BARRIER
-+ clr %o0
-+ retl
-+ movrne %g2, 1, %o0
-+ .size test_and_clear_bit, .-test_and_clear_bit
-+
-+ .globl test_and_change_bit
-+ .type test_and_change_bit,#function
-+test_and_change_bit: /* %o0=nr, %o1=addr */
-+ BITOP_PRE_BARRIER
-+ srlx %o0, 6, %g1
-+ mov 1, %g5
-+ sllx %g1, 3, %g3
-+ and %o0, 63, %g2
-+ sllx %g5, %g2, %g5
-+ add %o1, %g3, %o1
-+1: ldx [%o1], %g7
-+ xor %g7, %g5, %g1
-+ casx [%o1], %g7, %g1
-+ cmp %g7, %g1
-+ bne,pn %xcc, 1b
-+ and %g7, %g5, %g2
-+ BITOP_POST_BARRIER
-+ clr %o0
-+ retl
-+ movrne %g2, 1, %o0
-+ .size test_and_change_bit, .-test_and_change_bit
-+
-+ .globl set_bit
-+ .type set_bit,#function
-+set_bit: /* %o0=nr, %o1=addr */
-+ srlx %o0, 6, %g1
-+ mov 1, %g5
-+ sllx %g1, 3, %g3
-+ and %o0, 63, %g2
-+ sllx %g5, %g2, %g5
-+ add %o1, %g3, %o1
-+1: ldx [%o1], %g7
-+ or %g7, %g5, %g1
-+ casx [%o1], %g7, %g1
-+ cmp %g7, %g1
-+ bne,pn %xcc, 1b
-+ nop
-+ retl
-+ nop
-+ .size set_bit, .-set_bit
-+
-+ .globl clear_bit
-+ .type clear_bit,#function
-+clear_bit: /* %o0=nr, %o1=addr */
-+ srlx %o0, 6, %g1
-+ mov 1, %g5
-+ sllx %g1, 3, %g3
-+ and %o0, 63, %g2
-+ sllx %g5, %g2, %g5
-+ add %o1, %g3, %o1
-+1: ldx [%o1], %g7
-+ andn %g7, %g5, %g1
-+ casx [%o1], %g7, %g1
-+ cmp %g7, %g1
-+ bne,pn %xcc, 1b
-+ nop
-+ retl
-+ nop
-+ .size clear_bit, .-clear_bit
-+
-+ .globl change_bit
-+ .type change_bit,#function
-+change_bit: /* %o0=nr, %o1=addr */
- srlx %o0, 6, %g1
- mov 1, %g5
- sllx %g1, 3, %g3
- and %o0, 63, %g2
- sllx %g5, %g2, %g5
- add %o1, %g3, %o1
-- ldx [%o1], %g7
--1: and %g7, %g5, %o0
-+1: ldx [%o1], %g7
- xor %g7, %g5, %g1
- casx [%o1], %g7, %g1
- cmp %g7, %g1
-- bne,a,pn %xcc, 1b
-- ldx [%o1], %g7
--2: retl
-- membar #StoreLoad | #StoreStore
-- nop
--
-- .globl ___test_and_set_le_bit
--___test_and_set_le_bit: /* %o0=nr, %o1=addr */
-- srlx %o0, 5, %g1
-- mov 1, %g5
-- sllx %g1, 2, %g3
-- and %o0, 31, %g2
-- sllx %g5, %g2, %g5
-- add %o1, %g3, %o1
-- lduwa [%o1] ASI_PL, %g7
--1: andcc %g7, %g5, %o0
-- bne,pn %icc, 2f
-- xor %g7, %g5, %g1
-- casa [%o1] ASI_PL, %g7, %g1
-- cmp %g7, %g1
-- bne,a,pn %icc, 1b
-- lduwa [%o1] ASI_PL, %g7
--2: retl
-- membar #StoreLoad | #StoreStore
--
-- .globl ___test_and_clear_le_bit
--___test_and_clear_le_bit: /* %o0=nr, %o1=addr */
-- srlx %o0, 5, %g1
-- mov 1, %g5
-- sllx %g1, 2, %g3
-- and %o0, 31, %g2
-- sllx %g5, %g2, %g5
-- add %o1, %g3, %o1
-- lduwa [%o1] ASI_PL, %g7
--1: andcc %g7, %g5, %o0
-- be,pn %icc, 2f
-- xor %g7, %g5, %g1
-- casa [%o1] ASI_PL, %g7, %g1
-- cmp %g7, %g1
-- bne,a,pn %icc, 1b
-- lduwa [%o1] ASI_PL, %g7
--2: retl
-- membar #StoreLoad | #StoreStore
-+ bne,pn %xcc, 1b
-+ nop
-+ retl
-+ nop
-+ .size change_bit, .-change_bit
-
- .globl __bitops_end
- __bitops_end:
-diff -Nur linux-2.4.29/arch/sparc64/lib/debuglocks.c linux-mips/arch/sparc64/lib/debuglocks.c
---- linux-2.4.29/arch/sparc64/lib/debuglocks.c 2001-12-21 18:41:53.000000000 +0100
-+++ linux-mips/arch/sparc64/lib/debuglocks.c 2005-03-26 11:47:19.684421077 +0100
-@@ -162,6 +162,7 @@
- runlock_again:
- /* Spin trying to decrement the counter using casx. */
- __asm__ __volatile__(
-+" membar #StoreLoad | #LoadLoad\n"
- " ldx [%0], %%g5\n"
- " sub %%g5, 1, %%g7\n"
- " casx [%0], %%g5, %%g7\n"
-@@ -276,6 +277,7 @@
- current->thread.smp_lock_count--;
- wlock_again:
- __asm__ __volatile__(
-+" membar #StoreLoad | #LoadLoad\n"
- " mov 1, %%g3\n"
- " sllx %%g3, 63, %%g3\n"
- " ldx [%0], %%g5\n"
-diff -Nur linux-2.4.29/arch/sparc64/lib/rwlock.S linux-mips/arch/sparc64/lib/rwlock.S
---- linux-2.4.29/arch/sparc64/lib/rwlock.S 2000-09-09 02:55:17.000000000 +0200
-+++ linux-mips/arch/sparc64/lib/rwlock.S 2005-03-26 11:47:19.689420256 +0100
-@@ -24,12 +24,13 @@
- 99: retl
- nop
- __read_unlock: /* %o0 = lock_ptr */
-+ membar #StoreLoad | #LoadLoad
- lduw [%o0], %g5
- sub %g5, 1, %g7
- cas [%o0], %g5, %g7
- cmp %g5, %g7
- be,pt %xcc, 99b
-- membar #StoreLoad | #StoreStore
-+ nop
- ba,a,pt %xcc, __read_unlock
-
- __read_wait_for_writer:
-diff -Nur linux-2.4.29/arch/x86_64/ia32/socket32.c linux-mips/arch/x86_64/ia32/socket32.c
---- linux-2.4.29/arch/x86_64/ia32/socket32.c 2005-01-19 15:09:39.000000000 +0100
-+++ linux-mips/arch/x86_64/ia32/socket32.c 2005-03-26 11:47:19.905384811 +0100
-@@ -302,7 +302,8 @@
- * IPV6_RTHDR ipv6 routing exthdr 32-bit clean
- * IPV6_AUTHHDR ipv6 auth exthdr 32-bit clean
- */
--static void cmsg32_recvmsg_fixup(struct msghdr *kmsg, unsigned long orig_cmsg_uptr)
-+static void cmsg32_recvmsg_fixup(struct msghdr *kmsg,
-+ unsigned long orig_cmsg_uptr, __kernel_size_t orig_cmsg_len)
- {
- unsigned char *workbuf, *wp;
- unsigned long bufsz, space_avail;
-@@ -333,6 +334,9 @@
- __get_user(kcmsg32->cmsg_type, &ucmsg->cmsg_type);
-
- clen64 = kcmsg32->cmsg_len;
-+ if ((clen64 < CMSG_ALIGN(sizeof(*ucmsg))) ||
-+ (clen64 > (orig_cmsg_len + wp - workbuf)))
-+ break;
- copy_from_user(CMSG32_DATA(kcmsg32), CMSG_DATA(ucmsg),
- clen64 - CMSG_ALIGN(sizeof(*ucmsg)));
- clen32 = ((clen64 - CMSG_ALIGN(sizeof(*ucmsg))) +
-@@ -418,6 +422,7 @@
- struct sockaddr *uaddr;
- int *uaddr_len;
- unsigned long cmsg_ptr;
-+ __kernel_size_t cmsg_len;
- int err, total_len, len = 0;
-
- if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
-@@ -433,6 +438,7 @@
- total_len = err;
-
- cmsg_ptr = (unsigned long) kern_msg.msg_control;
-+ cmsg_len = kern_msg.msg_controllen;
- kern_msg.msg_flags = 0;
-
- sock = sockfd_lookup(fd, &err);
-@@ -458,7 +464,8 @@
- * to fix it up before we tack on more stuff.
- */
- if((unsigned long) kern_msg.msg_control != cmsg_ptr)
-- cmsg32_recvmsg_fixup(&kern_msg, cmsg_ptr);
-+ cmsg32_recvmsg_fixup(&kern_msg,
-+ cmsg_ptr, cmsg_len);
-
- /* Wheee... */
- if(sock->passcred)
-diff -Nur linux-2.4.29/arch/x86_64/kernel/acpi.c linux-mips/arch/x86_64/kernel/acpi.c
---- linux-2.4.29/arch/x86_64/kernel/acpi.c 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/arch/x86_64/kernel/acpi.c 2005-03-26 11:47:19.976373161 +0100
-@@ -53,6 +53,7 @@
-
- acpi_interrupt_flags acpi_sci_flags __initdata;
- int acpi_sci_override_gsi __initdata;
-+int acpi_skip_timer_override __initdata;
- /* --------------------------------------------------------------------------
- Boot-time Configuration
- -------------------------------------------------------------------------- */
-@@ -333,6 +334,12 @@
- return 0;
- }
-
-+ if (acpi_skip_timer_override &&
-+ intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
-+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
-+ return 0;
-+ }
-+
- mp_override_legacy_irq (
- intsrc->bus_irq,
- intsrc->flags.polarity,
-diff -Nur linux-2.4.29/arch/x86_64/kernel/io_apic.c linux-mips/arch/x86_64/kernel/io_apic.c
---- linux-2.4.29/arch/x86_64/kernel/io_apic.c 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/arch/x86_64/kernel/io_apic.c 2005-03-26 11:47:19.977372996 +0100
-@@ -259,10 +259,14 @@
- case PCI_VENDOR_ID_VIA:
- return;
- case PCI_VENDOR_ID_NVIDIA:
-+#ifdef CONFIG_ACPI
-+ /* All timer overrides on Nvidia
-+ seem to be wrong. Skip them. */
-+ acpi_skip_timer_override = 1;
- printk(KERN_INFO
-- "PCI bridge %02x:%02x from %x found. Setting \"noapic\". Overwrite with \"apic\"\n",
-- num,slot,vendor);
-- skip_ioapic_setup = 1;
-+ "Nvidia board detected. Ignoring ACPI timer override.\n");
-+#endif
-+ /* RED-PEN skip them on mptables too? */
- return;
- }
-
-diff -Nur linux-2.4.29/arch/x86_64/kernel/pci-irq.c linux-mips/arch/x86_64/kernel/pci-irq.c
---- linux-2.4.29/arch/x86_64/kernel/pci-irq.c 2003-08-25 13:44:40.000000000 +0200
-+++ linux-mips/arch/x86_64/kernel/pci-irq.c 2005-03-26 11:47:20.061359212 +0100
-@@ -742,7 +742,7 @@
- void pcibios_enable_irq(struct pci_dev *dev)
- {
- u8 pin;
-- extern int interrupt_line_quirk;
-+ extern int via_interrupt_line_quirk;
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
-@@ -762,6 +762,6 @@
- }
- /* VIA bridges use interrupt line for apic/pci steering across
- the V-Link */
-- else if (interrupt_line_quirk)
-+ else if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
-diff -Nur linux-2.4.29/arch/x86_64/kernel/setup.c linux-mips/arch/x86_64/kernel/setup.c
---- linux-2.4.29/arch/x86_64/kernel/setup.c 2005-01-19 15:09:39.000000000 +0100
-+++ linux-mips/arch/x86_64/kernel/setup.c 2005-03-26 11:47:20.069357900 +0100
-@@ -93,7 +93,8 @@
- struct resource standard_io_resources[] = {
- { "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
- { "pic1", 0x20, 0x3f, IORESOURCE_BUSY },
-- { "timer", 0x40, 0x5f, IORESOURCE_BUSY },
-+ { "timer0", 0x40, 0x43, IORESOURCE_BUSY },
-+ { "timer1", 0x50, 0x53, IORESOURCE_BUSY },
- { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
- { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
- { "pic2", 0xa0, 0xbf, IORESOURCE_BUSY },
-diff -Nur linux-2.4.29/Documentation/Changes linux-mips/Documentation/Changes
---- linux-2.4.29/Documentation/Changes 2005-01-19 15:09:22.000000000 +0100
-+++ linux-mips/Documentation/Changes 2005-03-26 11:47:05.688718095 +0100
-@@ -341,7 +341,7 @@
-
- JFSutils
- ---------
--o <http://oss.software.ibm.com/jfs/>
-+o <http://jfs.sourceforge.net/>
-
- Reiserfsprogs
- -------------
-diff -Nur linux-2.4.29/Documentation/Configure.help linux-mips/Documentation/Configure.help
---- linux-2.4.29/Documentation/Configure.help 2005-01-19 15:09:22.000000000 +0100
-+++ linux-mips/Documentation/Configure.help 2005-03-26 11:47:12.272637522 +0100
-@@ -9345,6 +9345,11 @@
-
- If unsure, say N.
-
-+CONFIG_SCSI_SATA_QSTOR
-+ This option enables support for Pacific Digital Serial ATA QStor.
-+
-+ If unsure, say N.
-+
- CONFIG_SCSI_SATA_SX4
- This option enables support for Promise Serial ATA SX4.
-
-diff -Nur linux-2.4.29/Documentation/filesystems/jfs.txt linux-mips/Documentation/filesystems/jfs.txt
---- linux-2.4.29/Documentation/filesystems/jfs.txt 2003-11-28 19:26:19.000000000 +0100
-+++ linux-mips/Documentation/filesystems/jfs.txt 2005-03-26 11:47:12.320629645 +0100
-@@ -1,13 +1,6 @@
- IBM's Journaled File System (JFS) for Linux
-
--JFS Homepage: http://oss.software.ibm.com/jfs/
--
--Team members
--------------
--Dave Kleikamp shaggy@austin.ibm.com
--Dave Blaschke blaschke@us.ibm.com
--Steve Best sbest@us.ibm.com
--Barry Arndt barndt@us.ibm.com
-+JFS Homepage: http://jfs.sourceforge.net/
-
- The following mount options are supported:
-
-@@ -15,7 +8,8 @@
- ASCII. The default is compiled into the kernel as
- CONFIG_NLS_DEFAULT. Use iocharset=utf8 for UTF8
- translations. This requires CONFIG_NLS_UTF8 to be set
-- in the kernel .config file.
-+ in the kernel .config file. Specify iocharset=none for
-+ no conversion (default linux-2.6 behavior).
-
- resize=value Resize the volume to <value> blocks. JFS only supports
- growing a volume, not shrinking it. This option is only
-@@ -51,4 +45,4 @@
- Please send bugs, comments, cards and letters to shaggy@austin.ibm.com.
-
- The JFS mailing list can be subscribed to by using the link labeled
--"Mail list Subscribe" at our web page http://oss.software.ibm.com/jfs/.
-+"Mail list Subscribe" at our web page http://jfs.sourceforge.net/.
-diff -Nur linux-2.4.29/Documentation/i2c/writing-clients linux-mips/Documentation/i2c/writing-clients
---- linux-2.4.29/Documentation/i2c/writing-clients 2004-11-17 12:54:20.000000000 +0100
-+++ linux-mips/Documentation/i2c/writing-clients 2005-03-26 11:47:12.338626691 +0100
-@@ -380,9 +380,6 @@
-
- For now, you can ignore the `flags' parameter. It is there for future use.
-
-- /* Unique ID allocation */
-- static int foo_id = 0;
--
- int foo_detect_client(struct i2c_adapter *adapter, int address,
- unsigned short flags, int kind)
- {
-@@ -518,7 +515,6 @@
- data->type = kind;
- /* SENSORS ONLY END */
-
-- new_client->id = foo_id++; /* Automatically unique */
- data->valid = 0; /* Only if you use this field */
- init_MUTEX(&data->update_lock); /* Only if you use this field */
-
-diff -Nur linux-2.4.29/drivers/acpi/pci_irq.c linux-mips/drivers/acpi/pci_irq.c
---- linux-2.4.29/drivers/acpi/pci_irq.c 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/drivers/acpi/pci_irq.c 2005-03-26 11:47:20.083355602 +0100
-@@ -335,6 +335,7 @@
- {
- int irq = 0;
- u8 pin = 0;
-+ extern int via_interrupt_line_quirk;
-
- ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");
-
-@@ -383,6 +384,9 @@
- }
- }
-
-+ if (via_interrupt_line_quirk)
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15);
-+
- dev->irq = irq;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %s using IRQ %d\n", dev->slot_name, dev->irq));
-diff -Nur linux-2.4.29/drivers/block/nbd.c linux-mips/drivers/block/nbd.c
---- linux-2.4.29/drivers/block/nbd.c 2003-08-25 13:44:41.000000000 +0200
-+++ linux-mips/drivers/block/nbd.c 2005-03-26 11:47:20.373308014 +0100
-@@ -408,10 +408,7 @@
- int dev, error, temp;
- struct request sreq ;
-
-- /* Anyone capable of this syscall can do *real bad* things */
-
-- if (!capable(CAP_SYS_ADMIN))
-- return -EPERM;
- if (!inode)
- return -EINVAL;
- dev = MINOR(inode->i_rdev);
-@@ -419,6 +416,20 @@
- return -ENODEV;
-
- lo = &nbd_dev[dev];
-+
-+ /* these are innocent, but.... */
-+ switch (cmd) {
-+ case BLKGETSIZE:
-+ return put_user(nbd_bytesizes[dev] >> 9, (unsigned long *) arg);
-+ case BLKGETSIZE64:
-+ return put_user((u64)nbd_bytesizes[dev], (u64 *) arg);
-+ }
-+
-+ /* ... anyone capable of any of the below ioctls can do *real bad*
-+ things */
-+ if (!capable(CAP_SYS_ADMIN))
-+ return -EPERM;
-+
- switch (cmd) {
- case NBD_DISCONNECT:
- printk("NBD_DISCONNECT\n");
-@@ -524,10 +535,6 @@
- dev, lo->queue_head.next, lo->queue_head.prev, requests_in, requests_out);
- return 0;
- #endif
-- case BLKGETSIZE:
-- return put_user(nbd_bytesizes[dev] >> 9, (unsigned long *) arg);
-- case BLKGETSIZE64:
-- return put_user((u64)nbd_bytesizes[dev], (u64 *) arg);
- }
- return -EINVAL;
- }
diff -Nur linux-2.4.29/drivers/char/au1000_gpio.c linux-mips/drivers/char/au1000_gpio.c
--- linux-2.4.29/drivers/char/au1000_gpio.c 2003-08-25 13:44:41.000000000 +0200
+++ linux-mips/drivers/char/au1000_gpio.c 2003-12-20 14:18:51.000000000 +0100
};
diff -Nur linux-2.4.29/drivers/char/au1550_psc_spi.c linux-mips/drivers/char/au1550_psc_spi.c
--- linux-2.4.29/drivers/char/au1550_psc_spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/drivers/char/au1550_psc_spi.c 2005-03-26 11:47:20.510285533 +0100
++++ linux-mips/drivers/char/au1550_psc_spi.c 2005-02-11 21:37:24.000000000 +0100
@@ -0,0 +1,466 @@
+/*
+ * Driver for Alchemy Au1550 SPI on the PSC.
+module_exit(au1550spi_exit);
diff -Nur linux-2.4.29/drivers/char/Config.in linux-mips/drivers/char/Config.in
--- linux-2.4.29/drivers/char/Config.in 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/drivers/char/Config.in 2005-03-26 11:47:20.469292261 +0100
++++ linux-mips/drivers/char/Config.in 2005-02-11 22:09:56.000000000 +0100
@@ -313,14 +313,11 @@
if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_DESCRIPTION("SGI IP27 M48T35 RTC driver");
+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.29/drivers/char/lcd.c linux-mips/drivers/char/lcd.c
---- linux-2.4.29/drivers/char/lcd.c 2005-01-19 15:09:46.000000000 +0100
-+++ linux-mips/drivers/char/lcd.c 2005-03-26 11:47:20.582273718 +0100
-@@ -386,6 +386,8 @@
-
- int ctr=0;
-
-+ if (!capable(CAP_SYS_ADMIN)) return -EPERM;
-+
- // Chip Erase Sequence
- WRITE_FLASH( kFlash_Addr1, kFlash_Data1 );
- WRITE_FLASH( kFlash_Addr2, kFlash_Data2 );
-@@ -422,6 +424,8 @@
-
- struct lcd_display display;
-
-+ if (!capable(CAP_SYS_ADMIN)) return -EPERM;
-+
- if(copy_from_user(&display, (struct lcd_display*)arg, sizeof(struct lcd_display)))
- return -EFAULT;
- rom = (unsigned char *) kmalloc((128),GFP_ATOMIC);
-@@ -434,8 +438,10 @@
- save_flags(flags);
- for (i=0; i<FLASH_SIZE; i=i+128) {
-
-- if(copy_from_user(rom, display.RomImage + i, 128))
-+ if(copy_from_user(rom, display.RomImage + i, 128)) {
-+ kfree(rom);
- return -EFAULT;
-+ }
- burn_addr = kFlashBase + i;
- cli();
- for ( index = 0; index < ( 128 ) ; index++ )
-diff -Nur linux-2.4.29/drivers/char/lp.c linux-mips/drivers/char/lp.c
---- linux-2.4.29/drivers/char/lp.c 2005-01-19 15:09:46.000000000 +0100
-+++ linux-mips/drivers/char/lp.c 2005-03-26 11:47:20.584273390 +0100
-@@ -314,12 +314,14 @@
- if (copy_size > LP_BUFFER_SIZE)
- copy_size = LP_BUFFER_SIZE;
-
-- if (copy_from_user (kbuf, buf, copy_size))
-- return -EFAULT;
--
- if (down_interruptible (&lp_table[minor].port_mutex))
- return -EINTR;
-
-+ if (copy_from_user (kbuf, buf, copy_size)) {
-+ retv = -EFAULT;
-+ goto out_unlock;
-+ }
-+
- /* Claim Parport or sleep until it becomes available
- */
- lp_claim_parport_or_block (&lp_table[minor]);
-@@ -398,7 +400,7 @@
- lp_table[minor].current_mode = IEEE1284_MODE_COMPAT;
- lp_release_parport (&lp_table[minor]);
- }
--
-+out_unlock:
- up (&lp_table[minor].port_mutex);
-
- return retv;
diff -Nur linux-2.4.29/drivers/char/Makefile linux-mips/drivers/char/Makefile
--- linux-2.4.29/drivers/char/Makefile 2004-08-08 01:26:04.000000000 +0200
-+++ linux-mips/drivers/char/Makefile 2005-03-26 11:47:20.471291933 +0100
++++ linux-mips/drivers/char/Makefile 2005-02-11 22:09:56.000000000 +0100
@@ -48,7 +48,12 @@
KEYBD =
endif
/*
* We used to support using pause I/O for certain machines. We
-diff -Nur linux-2.4.29/drivers/char/synclinkmp.c linux-mips/drivers/char/synclinkmp.c
---- linux-2.4.29/drivers/char/synclinkmp.c 2005-01-19 15:09:53.000000000 +0100
-+++ linux-mips/drivers/char/synclinkmp.c 2005-03-26 11:47:20.653262067 +0100
-@@ -1,5 +1,5 @@
- /*
-- * $Id$
-+ * $Id$
- *
- * Device driver for Microgate SyncLink Multiport
- * high speed multiprotocol serial adapter.
-@@ -504,7 +504,7 @@
- MODULE_PARM(dosyncppp,"1-" __MODULE_STRING(MAX_DEVICES) "i");
-
- static char *driver_name = "SyncLink MultiPort driver";
--static char *driver_version = "$Revision$";
-+static char *driver_version = "$Revision$";
-
- static int __devinit synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
- static void __devexit synclinkmp_remove_one(struct pci_dev *dev);
-@@ -4482,7 +4482,7 @@
- * 07..05 Reserved, must be 0
- * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
- */
-- write_reg(info, TRC0, 0x00);
-+ write_reg(info, RRC, 0x00);
-
- /* TRC0 Transmit Ready Control 0
- *
diff -Nur linux-2.4.29/drivers/char/victor_mpc30x_keymap.map linux-mips/drivers/char/victor_mpc30x_keymap.map
--- linux-2.4.29/drivers/char/victor_mpc30x_keymap.map 1970-01-01 01:00:00.000000000 +0100
+++ linux-mips/drivers/char/victor_mpc30x_keymap.map 2004-02-05 18:04:42.000000000 +0100
diff -Nur linux-2.4.29/drivers/i2c/Config.in linux-mips/drivers/i2c/Config.in
--- linux-2.4.29/drivers/i2c/Config.in 2004-04-14 15:05:29.000000000 +0200
-+++ linux-mips/drivers/i2c/Config.in 2005-03-26 11:47:20.974209393 +0100
++++ linux-mips/drivers/i2c/Config.in 2005-02-11 20:49:04.000000000 +0100
@@ -57,6 +57,10 @@
if [ "$CONFIG_SGI_IP22" = "y" ]; then
dep_tristate 'I2C SGI interfaces' CONFIG_I2C_ALGO_SGI $CONFIG_I2C
# This is needed for automatic patch generation: sensors code ends here
diff -Nur linux-2.4.29/drivers/i2c/i2c-algo-au1550.c linux-mips/drivers/i2c/i2c-algo-au1550.c
--- linux-2.4.29/drivers/i2c/i2c-algo-au1550.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/drivers/i2c/i2c-algo-au1550.c 2005-03-26 11:47:21.004204470 +0100
++++ linux-mips/drivers/i2c/i2c-algo-au1550.c 2005-02-11 20:49:04.000000000 +0100
@@ -0,0 +1,340 @@
+/*
+ * i2c-algo-au1550.c: SMBus (i2c) driver algorithms for Alchemy PSC interface
+MODULE_AUTHOR("Dan Malek <dan@embeddededge.com>");
+MODULE_DESCRIPTION("SMBus Au1550 algorithm");
+MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.29/drivers/i2c/i2c-algo-bit.c linux-mips/drivers/i2c/i2c-algo-bit.c
---- linux-2.4.29/drivers/i2c/i2c-algo-bit.c 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/i2c/i2c-algo-bit.c 2005-03-26 11:47:21.069193803 +0100
-@@ -28,14 +28,12 @@
- #include <linux/delay.h>
- #include <linux/slab.h>
- #include <linux/init.h>
--#include <asm/uaccess.h>
--#include <linux/ioport.h>
- #include <linux/errno.h>
- #include <linux/sched.h>
--
- #include <linux/i2c.h>
- #include <linux/i2c-algo-bit.h>
-
-+
- /* ----- global defines ----------------------------------------------- */
- #define DEB(x) if (i2c_debug>=1) x;
- #define DEB2(x) if (i2c_debug>=2) x;
-@@ -522,8 +520,8 @@
-
- static u32 bit_func(struct i2c_adapter *adap)
- {
-- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
-- I2C_FUNC_PROTOCOL_MANGLING;
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
-+ I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
- }
-
-
-diff -Nur linux-2.4.29/drivers/i2c/i2c-algo-pcf.c linux-mips/drivers/i2c/i2c-algo-pcf.c
---- linux-2.4.29/drivers/i2c/i2c-algo-pcf.c 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/i2c/i2c-algo-pcf.c 2005-03-26 11:47:21.128184122 +0100
-@@ -32,15 +32,13 @@
- #include <linux/delay.h>
- #include <linux/slab.h>
- #include <linux/init.h>
--#include <asm/uaccess.h>
--#include <linux/ioport.h>
- #include <linux/errno.h>
- #include <linux/sched.h>
--
- #include <linux/i2c.h>
- #include <linux/i2c-algo-pcf.h>
- #include "i2c-pcf8584.h"
-
-+
- /* ----- global defines ----------------------------------------------- */
- #define DEB(x) if (i2c_debug>=1) x
- #define DEB2(x) if (i2c_debug>=2) x
-@@ -435,8 +433,8 @@
-
- static u32 pcf_func(struct i2c_adapter *adap)
- {
-- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
-- I2C_FUNC_PROTOCOL_MANGLING;
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
-+ I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
- }
-
- /* -----exported algorithm data: ------------------------------------- */
diff -Nur linux-2.4.29/drivers/i2c/i2c-au1550.c linux-mips/drivers/i2c/i2c-au1550.c
--- linux-2.4.29/drivers/i2c/i2c-au1550.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/drivers/i2c/i2c-au1550.c 2005-03-26 11:47:21.146181168 +0100
++++ linux-mips/drivers/i2c/i2c-au1550.c 2005-02-11 20:49:04.000000000 +0100
@@ -0,0 +1,154 @@
+/*
+ * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
sensors_init();
diff -Nur linux-2.4.29/drivers/i2c/Makefile linux-mips/drivers/i2c/Makefile
--- linux-2.4.29/drivers/i2c/Makefile 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/i2c/Makefile 2005-03-26 11:47:20.975209228 +0100
++++ linux-mips/drivers/i2c/Makefile 2005-02-11 20:49:04.000000000 +0100
@@ -6,7 +6,7 @@
export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
# This is needed for automatic patch generation: sensors code starts here
# This is needed for automatic patch generation: sensors code ends here
-diff -Nur linux-2.4.29/drivers/ide/ide-cd.c linux-mips/drivers/ide/ide-cd.c
---- linux-2.4.29/drivers/ide/ide-cd.c 2003-11-28 19:26:20.000000000 +0100
-+++ linux-mips/drivers/ide/ide-cd.c 2005-03-26 11:47:21.315153436 +0100
-@@ -2206,25 +2206,31 @@
- /* Read the multisession information. */
- if (toc->hdr.first_track != CDROM_LEADOUT) {
- /* Read the multisession information. */
-- stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
-+ stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
- sizeof(ms_tmp), sense);
- if (stat) return stat;
-+
-+ toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
- } else {
-- ms_tmp.ent.addr.msf.minute = 0;
-- ms_tmp.ent.addr.msf.second = 2;
-- ms_tmp.ent.addr.msf.frame = 0;
- ms_tmp.hdr.first_track = ms_tmp.hdr.last_track = CDROM_LEADOUT;
-+ toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
- }
-
- #if ! STANDARD_ATAPI
-- if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd)
-+ if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
-+ /* Re-read multisession information using MSF format */
-+ stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
-+ sizeof(ms_tmp), sense);
-+ if (stat)
-+ return stat;
-+
- msf_from_bcd (&ms_tmp.ent.addr.msf);
-+ toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
-+ ms_tmp.ent.addr.msf.second,
-+ ms_tmp.ent.addr.msf.frame);
-+ }
- #endif /* not STANDARD_ATAPI */
-
-- toc->last_session_lba = msf_to_lba (ms_tmp.ent.addr.msf.minute,
-- ms_tmp.ent.addr.msf.second,
-- ms_tmp.ent.addr.msf.frame);
--
- toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
-
- /* Now try to get the total cdrom capacity. */
-diff -Nur linux-2.4.29/drivers/isdn/hisax/ipacx.c linux-mips/drivers/isdn/hisax/ipacx.c
---- linux-2.4.29/drivers/isdn/hisax/ipacx.c 2002-11-29 00:53:13.000000000 +0100
-+++ linux-mips/drivers/isdn/hisax/ipacx.c 2005-03-26 11:47:21.653097971 +0100
-@@ -152,7 +152,13 @@
-
- case (HW_RESET | REQUEST):
- case (HW_ENABLE | REQUEST):
-- ph_command(cs, IPACX_CMD_TIM);
-+ if ((cs->dc.isac.ph_state == IPACX_IND_RES) ||
-+ (cs->dc.isac.ph_state == IPACX_IND_DR) ||
-+ (cs->dc.isac.ph_state == IPACX_IND_DC))
-+ ph_command(cs, IPACX_CMD_TIM);
-+ else
-+ ph_command(cs, IPACX_CMD_RES);
-+
- break;
-
- case (HW_INFO3 | REQUEST):
-diff -Nur linux-2.4.29/drivers/md/lvm-snap.c linux-mips/drivers/md/lvm-snap.c
---- linux-2.4.29/drivers/md/lvm-snap.c 2004-04-14 15:05:30.000000000 +0200
-+++ linux-mips/drivers/md/lvm-snap.c 2005-03-26 11:47:21.896058096 +0100
-@@ -119,7 +119,6 @@
- unsigned long mask = lv->lv_snapshot_hash_mask;
- int chunk_size = lv->lv_chunk_size;
- lv_block_exception_t *ret;
-- int i = 0;
-
- hash_table =
- &hash_table[hashfn(org_dev, org_start, mask, chunk_size)];
-@@ -132,15 +131,9 @@
- exception = list_entry(next, lv_block_exception_t, hash);
- if (exception->rsector_org == org_start &&
- exception->rdev_org == org_dev) {
-- if (i) {
-- /* fun, isn't it? :) */
-- list_del(next);
-- list_add(next, hash_table);
-- }
- ret = exception;
- break;
- }
-- i++;
- }
- return ret;
- }
diff -Nur linux-2.4.29/drivers/media/video/indycam.c linux-mips/drivers/media/video/indycam.c
--- linux-2.4.29/drivers/media/video/indycam.c 2004-02-18 14:36:31.000000000 +0100
+++ linux-mips/drivers/media/video/indycam.c 2004-12-09 21:32:05.000000000 +0100
hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000
diff -Nur linux-2.4.29/drivers/mtd/maps/db1x00-flash.c linux-mips/drivers/mtd/maps/db1x00-flash.c
--- linux-2.4.29/drivers/mtd/maps/db1x00-flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/drivers/mtd/maps/db1x00-flash.c 2005-03-26 11:47:22.085027082 +0100
++++ linux-mips/drivers/mtd/maps/db1x00-flash.c 2005-02-03 07:35:29.000000000 +0100
@@ -0,0 +1,283 @@
+/*
+ * Flash memory access on Alchemy Db1xxx boards
struct pci_dev * pci_dev;
u32 full_duplex_enb; /* FDDI Full Duplex enable (1 == on, 2 == off) */
u32 req_ttrt; /* requested TTRT value (in 80ns units) */
-diff -Nur linux-2.4.29/drivers/net/e1000/e1000_ethtool.c linux-mips/drivers/net/e1000/e1000_ethtool.c
---- linux-2.4.29/drivers/net/e1000/e1000_ethtool.c 2005-01-19 15:09:56.000000000 +0100
-+++ linux-mips/drivers/net/e1000/e1000_ethtool.c 2005-03-26 11:47:31.355505582 +0100
-@@ -1309,7 +1309,7 @@
- struct e1000_desc_ring *txdr = &adapter->test_tx_ring;
- struct e1000_desc_ring *rxdr = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
-- int i;
-+ int i, ret_val;
-
- E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
-
-@@ -1329,11 +1329,12 @@
- rxdr->buffer_info[i].length,
- PCI_DMA_FROMDEVICE);
-
-- if (!e1000_check_lbtest_frame(rxdr->buffer_info[i++].skb, 1024))
-- return 0;
-- } while (i < 64);
-+ ret_val = e1000_check_lbtest_frame(rxdr->buffer_info[i].skb,
-+ 1024);
-+ i++;
-+ } while (ret_val != 0 && i < 64);
-
-- return 13;
-+ return ret_val;
- }
-
- static int
-diff -Nur linux-2.4.29/drivers/net/e1000/e1000.h linux-mips/drivers/net/e1000/e1000.h
---- linux-2.4.29/drivers/net/e1000/e1000.h 2005-01-19 15:09:56.000000000 +0100
-+++ linux-mips/drivers/net/e1000/e1000.h 2005-03-26 11:47:30.488647853 +0100
-@@ -140,6 +140,7 @@
- #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
- #define AUTO_ALL_MODES 0
-+#define E1000_EEPROM_82544_APM 0x0004
- #define E1000_EEPROM_APME 0x0400
-
- #ifndef E1000_MASTER_SLAVE
-@@ -211,6 +212,7 @@
-
- /* TX */
- struct e1000_desc_ring tx_ring;
-+ struct e1000_buffer previous_buffer_info;
- spinlock_t tx_lock;
- uint32_t txd_cmd;
- uint32_t tx_int_delay;
-@@ -224,6 +226,7 @@
- uint32_t tx_fifo_size;
- atomic_t tx_fifo_stall;
- boolean_t pcix_82544;
-+ boolean_t detect_tx_hung;
-
- /* RX */
- struct e1000_desc_ring rx_ring;
-diff -Nur linux-2.4.29/drivers/net/e1000/e1000_hw.c linux-mips/drivers/net/e1000/e1000_hw.c
---- linux-2.4.29/drivers/net/e1000/e1000_hw.c 2005-01-19 15:09:56.000000000 +0100
-+++ linux-mips/drivers/net/e1000/e1000_hw.c 2005-03-26 11:47:31.359504925 +0100
-@@ -1573,7 +1573,8 @@
- if(mii_status_reg & MII_SR_LINK_STATUS) break;
- msec_delay(100);
- }
-- if((i == 0) && (hw->phy_type == e1000_phy_m88)) {
-+ if((i == 0) &&
-+ (hw->phy_type == e1000_phy_m88)) {
- /* We didn't get link. Reset the DSP and wait again for link. */
- ret_val = e1000_phy_reset_dsp(hw);
- if(ret_val) {
-@@ -2504,7 +2505,7 @@
- }
- }
-
-- ret_val = e1000_read_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT & reg_addr,
-+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
- phy_data);
-
- return ret_val;
-@@ -2610,7 +2611,7 @@
- }
- }
-
-- ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT & reg_addr,
-+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
- phy_data);
-
- return ret_val;
-@@ -2956,8 +2957,7 @@
- /* Check polarity status */
- ret_val = e1000_check_polarity(hw, &polarity);
- if(ret_val)
-- return ret_val;
--
-+ return ret_val;
- phy_info->cable_polarity = polarity;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-@@ -2967,9 +2967,9 @@
- phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX) >>
- M88E1000_PSSR_MDIX_SHIFT;
-
-- if(phy_data & M88E1000_PSSR_1000MBS) {
-- /* Cable Length Estimation and Local/Remote Receiver Informatoion
-- * are only valid at 1000 Mbps
-+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
-+ /* Cable Length Estimation and Local/Remote Receiver Information
-+ * are only valid at 1000 Mbps.
- */
- phy_info->cable_length = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT);
-@@ -4641,41 +4641,44 @@
- {
- uint32_t status;
-
-- if(hw->mac_type < e1000_82543) {
-+ switch (hw->mac_type) {
-+ case e1000_82542_rev2_0:
-+ case e1000_82542_rev2_1:
- hw->bus_type = e1000_bus_type_unknown;
- hw->bus_speed = e1000_bus_speed_unknown;
- hw->bus_width = e1000_bus_width_unknown;
-- return;
-- }
--
-- status = E1000_READ_REG(hw, STATUS);
-- hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
-- e1000_bus_type_pcix : e1000_bus_type_pci;
-+ break;
-+ default:
-+ status = E1000_READ_REG(hw, STATUS);
-+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
-+ e1000_bus_type_pcix : e1000_bus_type_pci;
-
-- if(hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
-- hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
-- e1000_bus_speed_66 : e1000_bus_speed_120;
-- } else if(hw->bus_type == e1000_bus_type_pci) {
-- hw->bus_speed = (status & E1000_STATUS_PCI66) ?
-- e1000_bus_speed_66 : e1000_bus_speed_33;
-- } else {
-- switch (status & E1000_STATUS_PCIX_SPEED) {
-- case E1000_STATUS_PCIX_SPEED_66:
-- hw->bus_speed = e1000_bus_speed_66;
-- break;
-- case E1000_STATUS_PCIX_SPEED_100:
-- hw->bus_speed = e1000_bus_speed_100;
-- break;
-- case E1000_STATUS_PCIX_SPEED_133:
-- hw->bus_speed = e1000_bus_speed_133;
-- break;
-- default:
-- hw->bus_speed = e1000_bus_speed_reserved;
-- break;
-+ if(hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
-+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
-+ e1000_bus_speed_66 : e1000_bus_speed_120;
-+ } else if(hw->bus_type == e1000_bus_type_pci) {
-+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
-+ e1000_bus_speed_66 : e1000_bus_speed_33;
-+ } else {
-+ switch (status & E1000_STATUS_PCIX_SPEED) {
-+ case E1000_STATUS_PCIX_SPEED_66:
-+ hw->bus_speed = e1000_bus_speed_66;
-+ break;
-+ case E1000_STATUS_PCIX_SPEED_100:
-+ hw->bus_speed = e1000_bus_speed_100;
-+ break;
-+ case E1000_STATUS_PCIX_SPEED_133:
-+ hw->bus_speed = e1000_bus_speed_133;
-+ break;
-+ default:
-+ hw->bus_speed = e1000_bus_speed_reserved;
-+ break;
-+ }
- }
-+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
-+ e1000_bus_width_64 : e1000_bus_width_32;
-+ break;
- }
-- hw->bus_width = (status & E1000_STATUS_BUS64) ?
-- e1000_bus_width_64 : e1000_bus_width_32;
- }
- /******************************************************************************
- * Reads a value from one of the devices registers using port I/O (as opposed
-@@ -4740,6 +4743,7 @@
- uint16_t agc_value = 0;
- uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- uint16_t i, phy_data;
-+ uint16_t cable_length;
-
- DEBUGFUNC("e1000_get_cable_length");
-
-@@ -4751,10 +4755,11 @@
- &phy_data);
- if(ret_val)
- return ret_val;
-+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
-
- /* Convert the enum value to ranged values */
-- switch((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-- M88E1000_PSSR_CABLE_LENGTH_SHIFT) {
-+ switch (cable_length) {
- case e1000_cable_length_50:
- *min_length = 0;
- *max_length = e1000_igp_cable_length_50;
-@@ -4921,8 +4926,7 @@
- return ret_val;
-
- hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
-- }
-- else if(hw->phy_type == e1000_phy_m88) {
-+ } else if(hw->phy_type == e1000_phy_m88) {
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if(ret_val)
-diff -Nur linux-2.4.29/drivers/net/e1000/e1000_hw.h linux-mips/drivers/net/e1000/e1000_hw.h
---- linux-2.4.29/drivers/net/e1000/e1000_hw.h 2005-01-19 15:09:56.000000000 +0100
-+++ linux-mips/drivers/net/e1000/e1000_hw.h 2005-03-26 11:47:31.362504433 +0100
-@@ -36,7 +36,6 @@
- #include "e1000_osdep.h"
-
-
--
- /* Forward declarations of structures used by the shared code */
- struct e1000_hw;
- struct e1000_hw_stats;
-@@ -370,6 +369,7 @@
- #define E1000_DEV_ID_82546GB_SERDES 0x107B
- #define E1000_DEV_ID_82546GB_PCIE 0x108A
- #define E1000_DEV_ID_82547EI 0x1019
-+
- #define NODE_ADDRESS_SIZE 6
- #define ETH_LENGTH_OF_ADDRESS 6
-
-@@ -1735,6 +1735,9 @@
- #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
- #define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
-
-+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
-+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
-+
- /* M88E1000 Specific Registers */
- #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
- #define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-@@ -1795,8 +1798,7 @@
-
- #define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
-
--#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
--#define MAX_PHY_MULTI_PAGE_REG 0xF /*Registers that are equal on all pages*/
-+
- /* PHY Control Register */
- #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
- #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-@@ -2099,7 +2101,11 @@
- #define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
- #define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
-
-+
- /* Bit definitions for valid PHY IDs. */
-+/* I = Integrated
-+ * E = External
-+ */
- #define M88E1000_E_PHY_ID 0x01410C50
- #define M88E1000_I_PHY_ID 0x01410C30
- #define M88E1011_I_PHY_ID 0x01410C20
-diff -Nur linux-2.4.29/drivers/net/e1000/e1000_main.c linux-mips/drivers/net/e1000/e1000_main.c
---- linux-2.4.29/drivers/net/e1000/e1000_main.c 2005-01-19 15:09:56.000000000 +0100
-+++ linux-mips/drivers/net/e1000/e1000_main.c 2005-03-26 11:47:31.364504105 +0100
-@@ -34,6 +34,14 @@
- * - if_mii support and associated kcompat for older kernels
- * - More errlogging support from Jon Mason <jonmason@us.ibm.com>
- * - Fix TSO issues on PPC64 machines -- Jon Mason <jonmason@us.ibm.com>
-+ * 5.7.1 12/16/04
-+ * - Resurrect 82547EI/GI related fix in e1000_intr to avoid deadlocks. This
-+ * fix was removed as it caused system instability. The suspected cause of
-+ * this is the called to e1000_irq_disable in e1000_intr. Inlined the
-+ * required piece of e1000_irq_disable into e1000_intr.
-+ * 5.7.0 12/10/04
-+ * - include fix to the condition that determines when to quit NAPI - Robert Olsson
-+ * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down
- * 5.6.5 11/01/04
- * - Enabling NETIF_F_SG without checksum offload is illegal -
- John Mason <jdmason@us.ibm.com>
-@@ -41,8 +49,13 @@
- * - Remove redundant initialization - Jamal Hadi
- * - Reset buffer_info->dma in tx resource cleanup logic
- * 5.6.2 10/12/04
-+ * - Avoid filling tx_ring completely - shemminger@osdl.org
-+ * - Replace schedule_timeout() with msleep()/msleep_interruptible() -
-+ * nacc@us.ibm.com
- * - Sparse cleanup - shemminger@osdl.org
- * - Fix tx resource cleanup logic
-+ * - LLTX support - ak@suse.de and hadi@cyberus.ca
-+ * - {set, get}_wol is now symmetric for 82545EM adapters
- */
-
- char e1000_driver_name[] = "e1000";
-@@ -52,7 +65,7 @@
- #else
- #define DRIVERNAPI "-NAPI"
- #endif
--char e1000_driver_version[] = "5.6.10.1-k1"DRIVERNAPI;
-+char e1000_driver_version[] = "5.7.6-k1"DRIVERNAPI;
- char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation.";
-
- /* e1000_pci_tbl - PCI Device ID Table
-@@ -76,6 +89,7 @@
- INTEL_E1000_ETHERNET_DEVICE(0x1011),
- INTEL_E1000_ETHERNET_DEVICE(0x1012),
- INTEL_E1000_ETHERNET_DEVICE(0x1013),
-+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
- INTEL_E1000_ETHERNET_DEVICE(0x1015),
- INTEL_E1000_ETHERNET_DEVICE(0x1016),
- INTEL_E1000_ETHERNET_DEVICE(0x1017),
-@@ -303,6 +317,9 @@
- mod_timer(&adapter->watchdog_timer, jiffies);
- e1000_irq_enable(adapter);
-
-+#ifdef CONFIG_E1000_NAPI
-+ netif_poll_enable(netdev);
-+#endif
- return 0;
- }
-
-@@ -316,6 +333,10 @@
- del_timer_sync(&adapter->tx_fifo_stall_timer);
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-+
-+#ifdef CONFIG_E1000_NAPI
-+ netif_poll_disable(netdev);
-+#endif
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- netif_carrier_off(netdev);
-@@ -409,6 +430,7 @@
- int i;
- int err;
- uint16_t eeprom_data;
-+ uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
-
- if((err = pci_enable_device(pdev)))
- return err;
-@@ -505,9 +527,6 @@
- }
-
- #ifdef NETIF_F_TSO
-- /* Disbaled for now until root-cause is found for
-- * hangs reported against non-IA archs. TSO can be
-- * enabled using ethtool -K eth<x> tso on */
- if((adapter->hw.mac_type >= e1000_82544) &&
- (adapter->hw.mac_type != e1000_82547))
- netdev->features |= NETIF_F_TSO;
-@@ -576,6 +595,11 @@
- case e1000_82542_rev2_1:
- case e1000_82543:
- break;
-+ case e1000_82544:
-+ e1000_read_eeprom(&adapter->hw,
-+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
-+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
-+ break;
- case e1000_82546:
- case e1000_82546_rev_3:
- if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
-@@ -590,7 +614,7 @@
- EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
- break;
- }
-- if(eeprom_data & E1000_EEPROM_APME)
-+ if(eeprom_data & eeprom_apme_mask)
- adapter->wol |= E1000_WUFC_MAG;
-
- /* reset the hardware with the new settings */
-@@ -797,6 +821,31 @@
- }
-
- /**
-+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
-+ * @adapter: address of board private structure
-+ * @begin: address of beginning of memory
-+ * @end: address of end of memory
-+ **/
-+static inline boolean_t
-+e1000_check_64k_bound(struct e1000_adapter *adapter,
-+ void *start, unsigned long len)
-+{
-+ unsigned long begin = (unsigned long) start;
-+ unsigned long end = begin + len;
-+
-+ /* first rev 82545 and 82546 need to not allow any memory
-+ * write location to cross a 64k boundary due to errata 23 */
-+ if (adapter->hw.mac_type == e1000_82545 ||
-+ adapter->hw.mac_type == e1000_82546 ) {
-+
-+ /* check buffer doesn't cross 64kB */
-+ return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
-+ }
-+
-+ return TRUE;
-+}
-+
-+/**
- * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- *
-@@ -826,11 +875,42 @@
-
- txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
- if(!txdr->desc) {
-+setup_tx_desc_die:
- DPRINTK(PROBE, ERR,
- "Unable to Allocate Memory for the Transmit descriptor ring\n");
- vfree(txdr->buffer_info);
- return -ENOMEM;
- }
-+
-+ /* fix for errata 23, cant cross 64kB boundary */
-+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-+ void *olddesc = txdr->desc;
-+ dma_addr_t olddma = txdr->dma;
-+ DPRINTK(TX_ERR,ERR,"txdr align check failed: %u bytes at %p\n",
-+ txdr->size, txdr->desc);
-+ /* try again, without freeing the previous */
-+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
-+ /* failed allocation, critial failure */
-+ if(!txdr->desc) {
-+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+ goto setup_tx_desc_die;
-+ }
-+
-+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
-+ /* give up */
-+ pci_free_consistent(pdev, txdr->size,
-+ txdr->desc, txdr->dma);
-+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to Allocate aligned Memory for the Transmit"
-+ " descriptor ring\n");
-+ vfree(txdr->buffer_info);
-+ return -ENOMEM;
-+ } else {
-+ /* free old, move on with the new one since its okay */
-+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
-+ }
-+ }
- memset(txdr->desc, 0, txdr->size);
-
- txdr->next_to_use = 0;
-@@ -948,11 +1028,43 @@
- rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-
- if(!rxdr->desc) {
-+setup_rx_desc_die:
- DPRINTK(PROBE, ERR,
-- "Unable to Allocate Memory for the Recieve descriptor ring\n");
-+ "Unble to Allocate Memory for the Recieve descriptor ring\n");
- vfree(rxdr->buffer_info);
- return -ENOMEM;
- }
-+
-+ /* fix for errata 23, cant cross 64kB boundary */
-+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-+ void *olddesc = rxdr->desc;
-+ dma_addr_t olddma = rxdr->dma;
-+ DPRINTK(RX_ERR,ERR,
-+ "rxdr align check failed: %u bytes at %p\n",
-+ rxdr->size, rxdr->desc);
-+ /* try again, without freeing the previous */
-+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
-+ /* failed allocation, critial failure */
-+ if(!rxdr->desc) {
-+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+ goto setup_rx_desc_die;
-+ }
-+
-+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
-+ /* give up */
-+ pci_free_consistent(pdev, rxdr->size,
-+ rxdr->desc, rxdr->dma);
-+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+ DPRINTK(PROBE, ERR,
-+ "Unable to Allocate aligned Memory for the"
-+ " Receive descriptor ring\n");
-+ vfree(rxdr->buffer_info);
-+ return -ENOMEM;
-+ } else {
-+ /* free old, move on with the new one since its okay */
-+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
-+ }
-+ }
- memset(rxdr->desc, 0, rxdr->size);
-
- rxdr->next_to_clean = 0;
-@@ -1086,6 +1198,7 @@
- struct e1000_buffer *buffer_info)
- {
- struct pci_dev *pdev = adapter->pdev;
-+
- if(buffer_info->dma) {
- pci_unmap_page(pdev,
- buffer_info->dma,
-@@ -1114,6 +1227,11 @@
-
- /* Free all the Tx ring sk_buffs */
-
-+ if (likely(adapter->previous_buffer_info.skb != NULL)) {
-+ e1000_unmap_and_free_tx_resource(adapter,
-+ &adapter->previous_buffer_info);
-+ }
-+
- for(i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- e1000_unmap_and_free_tx_resource(adapter, buffer_info);
-@@ -1415,7 +1533,6 @@
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
- struct net_device *netdev = adapter->netdev;
- struct e1000_desc_ring *txdr = &adapter->tx_ring;
-- unsigned int i;
- uint32_t link;
-
- e1000_check_for_link(&adapter->hw);
-@@ -1495,12 +1612,8 @@
- /* Cause software interrupt to ensure rx ring is cleaned */
- E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
-
-- /* Early detection of hung controller */
-- i = txdr->next_to_clean;
-- if(txdr->buffer_info[i].dma &&
-- time_after(jiffies, txdr->buffer_info[i].time_stamp + HZ) &&
-- !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF))
-- netif_stop_queue(netdev);
-+ /* Force detection of hung controller every watchdog period*/
-+ adapter->detect_tx_hung = TRUE;
-
- /* Reset the timer */
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
-@@ -2132,10 +2245,28 @@
- __netif_rx_schedule(netdev);
- }
- #else
-+ /* Writing IMC and IMS is needed for 82547.
-+ Due to Hub Link bus being occupied, an interrupt
-+ de-assertion message is not able to be sent.
-+ When an interrupt assertion message is generated later,
-+ two messages are re-ordered and sent out.
-+ That causes APIC to think 82547 is in de-assertion
-+ state, while 82547 is in assertion state, resulting
-+ in dead lock. Writing IMC forces 82547 into
-+ de-assertion state.
-+ */
-+ if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){
-+ atomic_inc(&adapter->irq_sem);
-+ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-+ }
-+
- for(i = 0; i < E1000_MAX_INTR; i++)
- if(unlikely(!e1000_clean_rx_irq(adapter) &
- !e1000_clean_tx_irq(adapter)))
- break;
-+
-+ if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-+ e1000_irq_enable(adapter);
- #endif
-
- return IRQ_HANDLED;
-@@ -2155,24 +2286,21 @@
- int tx_cleaned;
- int work_done = 0;
-
-- if (!netif_carrier_ok(netdev))
-- goto quit_polling;
--
- tx_cleaned = e1000_clean_tx_irq(adapter);
- e1000_clean_rx_irq(adapter, &work_done, work_to_do);
-
- *budget -= work_done;
- netdev->quota -= work_done;
-
-- /* if no Rx and Tx cleanup work was done, exit the polling mode */
-- if(!tx_cleaned || (work_done < work_to_do) ||
-+ /* if no Tx and not enough Rx work done, exit the polling mode */
-+ if((!tx_cleaned && (work_done < work_to_do)) ||
- !netif_running(netdev)) {
--quit_polling: netif_rx_complete(netdev);
-+ netif_rx_complete(netdev);
- e1000_irq_enable(adapter);
- return 0;
- }
-
-- return (work_done >= work_to_do);
-+ return 1;
- }
-
- #endif
-@@ -2196,11 +2324,34 @@
- eop_desc = E1000_TX_DESC(*tx_ring, eop);
-
- while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
-+ /* pre-mature writeback of Tx descriptors */
-+ /* clear (free buffers and unmap pci_mapping) */
-+ /* previous_buffer_info */
-+ if (likely(adapter->previous_buffer_info.skb != NULL)) {
-+ e1000_unmap_and_free_tx_resource(adapter,
-+ &adapter->previous_buffer_info);
-+ }
-+
- for(cleaned = FALSE; !cleaned; ) {
- tx_desc = E1000_TX_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
-+ cleaned = (i == eop);
-+
-+ /* pre-mature writeback of Tx descriptors */
-+ /* save the cleaning of the this for the */
-+ /* next iteration */
-+ if (cleaned) {
-+ memcpy(&adapter->previous_buffer_info,
-+ buffer_info,
-+ sizeof(struct e1000_buffer));
-+ memset(buffer_info,
-+ 0,
-+ sizeof(struct e1000_buffer));
-+ } else {
-+ e1000_unmap_and_free_tx_resource(adapter,
-+ buffer_info);
-+ }
-
-- e1000_unmap_and_free_tx_resource(adapter, buffer_info);
- tx_desc->buffer_addr = 0;
- tx_desc->lower.data = 0;
- tx_desc->upper.data = 0;
-@@ -2222,6 +2373,16 @@
- netif_wake_queue(netdev);
-
- spin_unlock(&adapter->tx_lock);
-+
-+ if(adapter->detect_tx_hung) {
-+ /* detect a transmit hang in hardware, this serializes the
-+ * check with the clearing of time_stamp and movement of i */
-+ adapter->detect_tx_hung = FALSE;
-+ if(tx_ring->buffer_info[i].dma &&
-+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) &&
-+ !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF))
-+ netif_stop_queue(netdev);
-+ }
-
- return cleaned;
- }
-@@ -2389,20 +2550,43 @@
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- int reserve_len = 2;
-- unsigned int i;
-+ unsigned int i, bufsz;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while(!buffer_info->skb) {
-+ bufsz = adapter->rx_buffer_len + reserve_len;
-
-- skb = dev_alloc_skb(adapter->rx_buffer_len + reserve_len);
--
-+ skb = dev_alloc_skb(bufsz);
- if(unlikely(!skb)) {
- /* Better luck next round */
- break;
- }
-
-+ /* fix for errata 23, cant cross 64kB boundary */
-+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
-+ struct sk_buff *oldskb = skb;
-+ DPRINTK(RX_ERR,ERR,
-+ "skb align check failed: %u bytes at %p\n",
-+ bufsz, skb->data);
-+ /* try again, without freeing the previous */
-+ skb = dev_alloc_skb(bufsz);
-+ if (!skb) {
-+ dev_kfree_skb(oldskb);
-+ break;
-+ }
-+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
-+ /* give up */
-+ dev_kfree_skb(skb);
-+ dev_kfree_skb(oldskb);
-+ break; /* while !buffer_info->skb */
-+ } else {
-+ /* move on with the new one */
-+ dev_kfree_skb(oldskb);
-+ }
-+ }
-+
- /* Make buffer alignment 2 beyond a 16 byte boundary
- * this will result in a 16 byte aligned IP header after
- * the 14 byte MAC header is removed
-@@ -2418,6 +2602,25 @@
- adapter->rx_buffer_len,
- PCI_DMA_FROMDEVICE);
-
-+ /* fix for errata 23, cant cross 64kB boundary */
-+ if(!e1000_check_64k_bound(adapter,
-+ (void *)(unsigned long)buffer_info->dma,
-+ adapter->rx_buffer_len)) {
-+ DPRINTK(RX_ERR,ERR,
-+ "dma align check failed: %u bytes at %ld\n",
-+ adapter->rx_buffer_len, (unsigned long)buffer_info->dma);
-+
-+ dev_kfree_skb(skb);
-+ buffer_info->skb = NULL;
-+
-+ pci_unmap_single(pdev,
-+ buffer_info->dma,
-+ adapter->rx_buffer_len,
-+ PCI_DMA_FROMDEVICE);
-+
-+ break; /* while !buffer_info->skb */
-+ }
-+
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
diff -Nur linux-2.4.29/drivers/net/hamradio/hdlcdrv.c linux-mips/drivers/net/hamradio/hdlcdrv.c
--- linux-2.4.29/drivers/net/hamradio/hdlcdrv.c 2002-02-25 20:37:59.000000000 +0100
+++ linux-mips/drivers/net/hamradio/hdlcdrv.c 2004-05-04 14:04:27.000000000 +0200
if (s->skb)
diff -Nur linux-2.4.29/drivers/net/irda/au1k_ir.c linux-mips/drivers/net/irda/au1k_ir.c
--- linux-2.4.29/drivers/net/irda/au1k_ir.c 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/net/irda/au1k_ir.c 2005-03-26 11:47:31.367503613 +0100
++++ linux-mips/drivers/net/irda/au1k_ir.c 2005-02-03 07:35:29.000000000 +0100
@@ -81,10 +81,6 @@
#define RUN_AT(x) (jiffies + (x))
static spinlock_t ir_lock = SPIN_LOCK_UNLOCKED;
/*
-diff -Nur linux-2.4.29/drivers/net/sk98lin/skvpd.c linux-mips/drivers/net/sk98lin/skvpd.c
---- linux-2.4.29/drivers/net/sk98lin/skvpd.c 2004-04-14 15:05:30.000000000 +0200
-+++ linux-mips/drivers/net/sk98lin/skvpd.c 2005-03-26 11:47:31.369503284 +0100
-@@ -466,6 +466,15 @@
-
- pAC->vpd.vpd_size = vpd_size;
-
-+ /* Asus K8V Se Deluxe bugfix. Correct VPD content */
-+ /* MBo April 2004 */
-+ if( ((unsigned char)pAC->vpd.vpd_buf[0x3f] == 0x38) &&
-+ ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) &&
-+ ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45) ) {
-+ printk(KERN_INFO "sk98lin : humm... Asus mainboard with buggy VPD ? correcting data.\n");
-+ (unsigned char)pAC->vpd.vpd_buf[0x40] = 0x38;
-+ }
-+
- /* find the end tag of the RO area */
- if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) {
- SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-diff -Nur linux-2.4.29/drivers/net/tg3.c linux-mips/drivers/net/tg3.c
---- linux-2.4.29/drivers/net/tg3.c 2005-01-19 15:09:56.000000000 +0100
-+++ linux-mips/drivers/net/tg3.c 2005-03-26 11:47:30.480649166 +0100
-@@ -59,8 +59,8 @@
-
- #define DRV_MODULE_NAME "tg3"
- #define PFX DRV_MODULE_NAME ": "
--#define DRV_MODULE_VERSION "3.15"
--#define DRV_MODULE_RELDATE "January 6, 2005"
-+#define DRV_MODULE_VERSION "3.24"
-+#define DRV_MODULE_RELDATE "March 4, 2005"
-
- #define TG3_DEF_MAC_MODE 0
- #define TG3_DEF_RX_MODE 0
-@@ -575,9 +575,10 @@
- if (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED)
- return;
+diff -Nur linux-2.4.29/drivers/pci/pci.c linux-mips/drivers/pci/pci.c
+--- linux-2.4.29/drivers/pci/pci.c 2004-11-17 12:54:21.000000000 +0100
++++ linux-mips/drivers/pci/pci.c 2004-11-19 01:28:41.000000000 +0100
+@@ -1281,11 +1281,17 @@
+ {
+ unsigned int buses;
+ unsigned short cr;
++ unsigned short bctl;
+ struct pci_bus *child;
+ int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
-- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007);
-- tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
-- tg3_writephy(tp, MII_TG3_AUX_CTRL, (val | (1 << 15) | (1 << 4)));
-+ if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007) &&
-+ !tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
-+ tg3_writephy(tp, MII_TG3_AUX_CTRL,
-+ (val | (1 << 15) | (1 << 4)));
+ pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
+ DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass);
++ /* Disable MasterAbortMode during probing to avoid reporting
++ of bus errors (in some architectures) */
++ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
++ pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
++ bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
+ if ((buses & 0xffff00) && !pcibios_assign_all_busses()) {
+ /*
+ * Bus already configured by firmware, process it in the first
+@@ -1351,6 +1357,7 @@
+ pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
+ pci_write_config_word(dev, PCI_COMMAND, cr);
+ }
++ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
+ sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
+ return max;
}
+diff -Nur linux-2.4.29/drivers/pcmcia/au1000_db1x00.c linux-mips/drivers/pcmcia/au1000_db1x00.c
+--- linux-2.4.29/drivers/pcmcia/au1000_db1x00.c 2005-01-19 15:09:57.000000000 +0100
++++ linux-mips/drivers/pcmcia/au1000_db1x00.c 2005-02-03 07:35:30.000000000 +0100
+@@ -1,6 +1,6 @@
+ /*
+ *
+- * Alchemy Semi Db1x00 boards specific pcmcia routines.
++ * AMD Alchemy DUAL-SLOT Db1x00 boards' specific pcmcia routines.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+@@ -54,9 +54,20 @@
+ #include <asm/au1000.h>
+ #include <asm/au1000_pcmcia.h>
- static int tg3_bmcr_reset(struct tg3 *tp)
-@@ -618,9 +619,10 @@
- while (limit--) {
- u32 tmp32;
-
-- tg3_readphy(tp, 0x16, &tmp32);
-- if ((tmp32 & 0x1000) == 0)
-- break;
-+ if (!tg3_readphy(tp, 0x16, &tmp32)) {
-+ if ((tmp32 & 0x1000) == 0)
-+ break;
-+ }
- }
- if (limit <= 0)
- return -EBUSY;
-@@ -672,9 +674,9 @@
- for (i = 0; i < 6; i += 2) {
- u32 low, high;
-
-- tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &low);
-- tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &high);
-- if (tg3_wait_macro_done(tp)) {
-+ if (tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &low) ||
-+ tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &high) ||
-+ tg3_wait_macro_done(tp)) {
- *resetp = 1;
- return -EBUSY;
- }
-@@ -730,7 +732,9 @@
- }
++#if defined(CONFIG_MIPS_PB1200)
++#include <asm/pb1200.h>
++#elif defined(CONFIG_MIPS_DB1200)
++#include <asm/db1200.h>
++#else
+ #include <asm/db1x00.h>
++#endif
- /* Disable transmitter and interrupt. */
-- tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32);
-+ if (tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32))
-+ continue;
+-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
++#define PCMCIA_MAX_SOCK 1
++#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
- reg32 |= 0x3000;
- tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
++/* VPP/VCC */
++#define SET_VCC_VPP(VCC, VPP, SLOT)\
++ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-@@ -739,7 +743,9 @@
- BMCR_FULLDPLX | TG3_BMCR_SPEED1000);
+ static int db1x00_pcmcia_init(struct pcmcia_init *init)
+ {
+@@ -76,7 +87,7 @@
+ db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
+ {
+ u32 inserted;
+- unsigned char vs;
++ u16 vs;
- /* Set to master mode. */
-- tg3_readphy(tp, MII_TG3_CTRL, &phy9_orig);
-+ if (tg3_readphy(tp, MII_TG3_CTRL, &phy9_orig))
-+ continue;
-+
- tg3_writephy(tp, MII_TG3_CTRL,
- (MII_TG3_CTRL_AS_MASTER |
- MII_TG3_CTRL_ENABLE_AS_MASTER));
-@@ -777,9 +783,11 @@
+ if(sock > PCMCIA_MAX_SOCK) return -1;
- tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
-
-- tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32);
-- reg32 &= ~0x3000;
-- tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
-+ if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) {
-+ reg32 &= ~0x3000;
-+ tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
-+ } else if (!err)
-+ err = -EBUSY;
+@@ -87,11 +98,11 @@
- return err;
- }
-@@ -843,9 +851,9 @@
- u32 phy_reg;
-
- /* Set bit 14 with read-modify-write to preserve other bits */
-- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007);
-- tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy_reg);
-- tg3_writephy(tp, MII_TG3_AUX_CTRL, phy_reg | 0x4000);
-+ if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007) &&
-+ !tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy_reg))
-+ tg3_writephy(tp, MII_TG3_AUX_CTRL, phy_reg | 0x4000);
+ if (sock == 0) {
+ vs = bcsr->status & 0x3;
+- inserted = !(bcsr->status & (1<<4));
++ inserted = BOARD_CARD_INSERTED(0);
}
- tg3_phy_set_wirespeed(tp);
- return 0;
-@@ -877,7 +885,7 @@
- GRC_LCLCTRL_GPIO_OUTPUT1));
- udelay(100);
- } else {
-- int no_gpio2;
-+ u32 no_gpio2;
- u32 grc_local_ctrl;
-
- if (tp_peer != tp &&
-@@ -885,8 +893,8 @@
- return;
-
- /* On 5753 and variants, GPIO2 cannot be used. */
-- no_gpio2 = (tp->nic_sram_data_cfg &
-- NIC_SRAM_DATA_CFG_NO_GPIO2) != 0;
-+ no_gpio2 = tp->nic_sram_data_cfg &
-+ NIC_SRAM_DATA_CFG_NO_GPIO2;
-
- grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
- GRC_LCLCTRL_GPIO_OE1 |
-@@ -898,29 +906,17 @@
- GRC_LCLCTRL_GPIO_OUTPUT2);
- }
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
-- grc_local_ctrl);
-+ grc_local_ctrl);
- udelay(100);
-
-- grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
-- GRC_LCLCTRL_GPIO_OE1 |
-- GRC_LCLCTRL_GPIO_OE2 |
-- GRC_LCLCTRL_GPIO_OUTPUT0 |
-- GRC_LCLCTRL_GPIO_OUTPUT1 |
-- GRC_LCLCTRL_GPIO_OUTPUT2;
-- if (no_gpio2) {
-- grc_local_ctrl &= ~(GRC_LCLCTRL_GPIO_OE2 |
-- GRC_LCLCTRL_GPIO_OUTPUT2);
-- }
-+ grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT0;
-+
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
-- grc_local_ctrl);
-+ grc_local_ctrl);
- udelay(100);
-
-- grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
-- GRC_LCLCTRL_GPIO_OE1 |
-- GRC_LCLCTRL_GPIO_OE2 |
-- GRC_LCLCTRL_GPIO_OUTPUT0 |
-- GRC_LCLCTRL_GPIO_OUTPUT1;
- if (!no_gpio2) {
-+ grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT2;
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
- grc_local_ctrl);
- udelay(100);
-@@ -1240,7 +1236,7 @@
- };
- }
-
--static int tg3_phy_copper_begin(struct tg3 *tp)
-+static void tg3_phy_copper_begin(struct tg3 *tp)
- {
- u32 new_adv;
- int i;
-@@ -1355,15 +1351,16 @@
- if (tp->link_config.duplex == DUPLEX_FULL)
- bmcr |= BMCR_FULLDPLX;
-
-- tg3_readphy(tp, MII_BMCR, &orig_bmcr);
-- if (bmcr != orig_bmcr) {
-+ if (!tg3_readphy(tp, MII_BMCR, &orig_bmcr) &&
-+ (bmcr != orig_bmcr)) {
- tg3_writephy(tp, MII_BMCR, BMCR_LOOPBACK);
- for (i = 0; i < 1500; i++) {
- u32 tmp;
-
- udelay(10);
-- tg3_readphy(tp, MII_BMSR, &tmp);
-- tg3_readphy(tp, MII_BMSR, &tmp);
-+ if (tg3_readphy(tp, MII_BMSR, &tmp) ||
-+ tg3_readphy(tp, MII_BMSR, &tmp))
-+ continue;
- if (!(tmp & BMSR_LSTATUS)) {
- udelay(40);
- break;
-@@ -1376,8 +1373,6 @@
- tg3_writephy(tp, MII_BMCR,
- BMCR_ANENABLE | BMCR_ANRESTART);
+ else {
+ vs = (bcsr->status & 0xC)>>2;
+- inserted = !(bcsr->status & (1<<5));
++ inserted = BOARD_CARD_INSERTED(1);
}
--
-- return 0;
- }
- static int tg3_init_5401phy_dsp(struct tg3 *tp)
-@@ -1412,7 +1407,9 @@
- {
- u32 adv_reg, all_mask;
-
-- tg3_readphy(tp, MII_ADVERTISE, &adv_reg);
-+ if (tg3_readphy(tp, MII_ADVERTISE, &adv_reg))
-+ return 0;
-+
- all_mask = (ADVERTISE_10HALF | ADVERTISE_10FULL |
- ADVERTISE_100HALF | ADVERTISE_100FULL);
- if ((adv_reg & all_mask) != all_mask)
-@@ -1420,7 +1417,9 @@
- if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY)) {
- u32 tg3_ctrl;
-
-- tg3_readphy(tp, MII_TG3_CTRL, &tg3_ctrl);
-+ if (tg3_readphy(tp, MII_TG3_CTRL, &tg3_ctrl))
-+ return 0;
-+
- all_mask = (MII_TG3_CTRL_ADV_1000_HALF |
- MII_TG3_CTRL_ADV_1000_FULL);
- if ((tg3_ctrl & all_mask) != all_mask)
-@@ -1460,8 +1459,8 @@
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
- netif_carrier_ok(tp->dev)) {
- tg3_readphy(tp, MII_BMSR, &bmsr);
-- tg3_readphy(tp, MII_BMSR, &bmsr);
-- if (!(bmsr & BMSR_LSTATUS))
-+ if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
-+ !(bmsr & BMSR_LSTATUS))
- force_reset = 1;
- }
- if (force_reset)
-@@ -1469,9 +1468,8 @@
+ DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n",
+@@ -144,16 +155,9 @@
+ if(info->sock > PCMCIA_MAX_SOCK) return -1;
- if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
- tg3_readphy(tp, MII_BMSR, &bmsr);
-- tg3_readphy(tp, MII_BMSR, &bmsr);
+ if(info->sock == 0)
+-#ifdef CONFIG_MIPS_DB1550
+- info->irq = AU1000_GPIO_3;
++ info->irq = BOARD_PC0_INT;
+ else
+- info->irq = AU1000_GPIO_5;
+-#else
+- info->irq = AU1000_GPIO_2;
+- else
+- info->irq = AU1000_GPIO_5;
+-#endif
-
-- if (!(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
-+ if (tg3_readphy(tp, MII_BMSR, &bmsr) ||
-+ !(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
- bmsr = 0;
-
- if (!(bmsr & BMSR_LSTATUS)) {
-@@ -1482,8 +1480,8 @@
- tg3_readphy(tp, MII_BMSR, &bmsr);
- for (i = 0; i < 1000; i++) {
- udelay(10);
-- tg3_readphy(tp, MII_BMSR, &bmsr);
-- if (bmsr & BMSR_LSTATUS) {
-+ if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
-+ (bmsr & BMSR_LSTATUS)) {
- udelay(40);
- break;
- }
-@@ -1545,8 +1543,8 @@
- bmsr = 0;
- for (i = 0; i < 100; i++) {
- tg3_readphy(tp, MII_BMSR, &bmsr);
-- tg3_readphy(tp, MII_BMSR, &bmsr);
-- if (bmsr & BMSR_LSTATUS)
-+ if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
-+ (bmsr & BMSR_LSTATUS))
- break;
- udelay(40);
- }
-@@ -1557,8 +1555,8 @@
- tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
- for (i = 0; i < 2000; i++) {
- udelay(10);
-- tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
-- if (aux_stat)
-+ if (!tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat) &&
-+ aux_stat)
- break;
- }
-
-@@ -1569,7 +1567,8 @@
- bmcr = 0;
- for (i = 0; i < 200; i++) {
- tg3_readphy(tp, MII_BMCR, &bmcr);
-- tg3_readphy(tp, MII_BMCR, &bmcr);
-+ if (tg3_readphy(tp, MII_BMCR, &bmcr))
-+ continue;
- if (bmcr && bmcr != 0x7fff)
- break;
- udelay(10);
-@@ -1606,10 +1605,13 @@
- (tp->link_config.autoneg == AUTONEG_ENABLE)) {
- u32 local_adv, remote_adv;
-
-- tg3_readphy(tp, MII_ADVERTISE, &local_adv);
-+ if (tg3_readphy(tp, MII_ADVERTISE, &local_adv))
-+ local_adv = 0;
- local_adv &= (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-
-- tg3_readphy(tp, MII_LPA, &remote_adv);
-+ if (tg3_readphy(tp, MII_LPA, &remote_adv))
-+ remote_adv = 0;
-+
- remote_adv &= (LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
-
- /* If we are not advertising full pause capability,
-@@ -1628,8 +1630,8 @@
- tg3_phy_copper_begin(tp);
-
- tg3_readphy(tp, MII_BMSR, &tmp);
-- tg3_readphy(tp, MII_BMSR, &tmp);
-- if (tmp & BMSR_LSTATUS)
-+ if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
-+ (tmp & BMSR_LSTATUS))
- current_link_up = 1;
- }
-
-@@ -2130,8 +2132,9 @@
- if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
- port_a = 0;
-
-- serdes_cfg = tr32(MAC_SERDES_CFG) &
-- ((1 << 23) | (1 << 22) | (1 << 21) | (1 << 20));
-+ /* preserve bits 0-11,13,14 for signal pre-emphasis */
-+ /* preserve bits 20-23 for voltage regulator */
-+ serdes_cfg = tr32(MAC_SERDES_CFG) & 0x00f06fff;
- }
-
- sg_dig_ctrl = tr32(SG_DIG_CTRL);
-@@ -2142,9 +2145,9 @@
- u32 val = serdes_cfg;
-
- if (port_a)
-- val |= 0xc010880;
-+ val |= 0xc010000;
- else
-- val |= 0x4010880;
-+ val |= 0x4010000;
- tw32_f(MAC_SERDES_CFG, val);
- }
- tw32_f(SG_DIG_CTRL, 0x01388400);
-@@ -2167,7 +2170,7 @@
-
- if (sg_dig_ctrl != expected_sg_dig_ctrl) {
- if (workaround)
-- tw32_f(MAC_SERDES_CFG, serdes_cfg | 0xc011880);
-+ tw32_f(MAC_SERDES_CFG, serdes_cfg | 0xc011000);
- tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl | (1 << 30));
- udelay(5);
- tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl);
-@@ -2208,9 +2211,9 @@
- u32 val = serdes_cfg;
-
- if (port_a)
-- val |= 0xc010880;
-+ val |= 0xc010000;
- else
-- val |= 0x4010880;
-+ val |= 0x4010000;
-
- tw32_f(MAC_SERDES_CFG, val);
- }
-@@ -2218,8 +2221,12 @@
- tw32_f(SG_DIG_CTRL, 0x01388400);
- udelay(40);
-
-+ /* Link parallel detection - link is up */
-+ /* only if we have PCS_SYNC and not */
-+ /* receiving config code words */
- mac_status = tr32(MAC_STATUS);
-- if (mac_status & MAC_STATUS_PCS_SYNCED) {
-+ if ((mac_status & MAC_STATUS_PCS_SYNCED) &&
-+ !(mac_status & MAC_STATUS_RCVD_CFG)) {
- tg3_setup_flow_control(tp, 0, 0);
- current_link_up = 1;
- }
-@@ -2690,7 +2697,11 @@
-
- len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; /* omit crc */
-
-- if (len > RX_COPY_THRESHOLD) {
-+ if (len > RX_COPY_THRESHOLD
-+ && tp->rx_offset == 2
-+ /* rx_offset != 2 iff this is a 5701 card running
-+ * in PCI-X mode [see tg3_get_invariants()] */
-+ ) {
- int skb_size;
-
- skb_size = tg3_alloc_rx_skb(tp, opaque_key,
-@@ -3085,11 +3096,19 @@
-
- skb->nh.iph->check = 0;
- skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len);
-- skb->h.th->check = ~csum_tcpudp_magic(skb->nh.iph->saddr,
-- skb->nh.iph->daddr,
-- 0, IPPROTO_TCP, 0);
-+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
-+ skb->h.th->check = 0;
-+ base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
-+ }
-+ else {
-+ skb->h.th->check =
-+ ~csum_tcpudp_magic(skb->nh.iph->saddr,
-+ skb->nh.iph->daddr,
-+ 0, IPPROTO_TCP, 0);
-+ }
-
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
-+ if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
-+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
- if (tcp_opt_len || skb->nh.iph->ihl > 5) {
- int tsflags;
-
-@@ -3156,7 +3175,7 @@
- would_hit_hwbug = entry + 1;
- }
-
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
-+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- tg3_set_txd(tp, entry, mapping, len,
- base_flags, (i == last)|(mss << 1));
- else
-@@ -3655,8 +3674,9 @@
- /* tp->lock is held. */
- static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
- {
-- tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
-- NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
-+ if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
-+ tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
-+ NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
-
- if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
- switch (kind) {
-@@ -3860,19 +3880,20 @@
- tw32_f(MAC_MODE, 0);
- udelay(40);
-
-- /* Wait for firmware initialization to complete. */
-- for (i = 0; i < 100000; i++) {
-- tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
-- if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
-- break;
-- udelay(10);
-- }
-- if (i >= 100000 &&
-- !(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
-- printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
-- "firmware will not restart magic=%08x\n",
-- tp->dev->name, val);
-- return -ENODEV;
-+ if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
-+ /* Wait for firmware initialization to complete. */
-+ for (i = 0; i < 100000; i++) {
-+ tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
-+ if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
-+ break;
-+ udelay(10);
-+ }
-+ if (i >= 100000) {
-+ printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
-+ "firmware will not restart magic=%08x\n",
-+ tp->dev->name, val);
-+ return -ENODEV;
-+ }
- }
-
- if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
-@@ -4747,7 +4768,7 @@
- unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
- int err, i;
-
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
-+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- return 0;
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
-@@ -4831,9 +4852,8 @@
- tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
- }
-
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
-- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
-- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
-+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
-+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
- for (i = 0; i < 12; i++) {
- tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high);
- tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low);
-@@ -4879,7 +4899,8 @@
- (bdinfo_addr + TG3_BDINFO_MAXLEN_FLAGS),
- maxlen_flags);
-
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705)
-+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) &&
-+ (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750))
- tg3_write_mem(tp,
- (bdinfo_addr + TG3_BDINFO_NIC_ADDR),
- nic_addr);
-@@ -5181,7 +5202,7 @@
- }
++ info->irq = BOARD_PC1_INT;
+ return 0;
+ }
- #if TG3_TSO_SUPPORT != 0
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
-+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- rdmac_mode |= (1 << 27);
- #endif
+diff -Nur linux-2.4.29/drivers/pcmcia/Config.in linux-mips/drivers/pcmcia/Config.in
+--- linux-2.4.29/drivers/pcmcia/Config.in 2004-02-18 14:36:31.000000000 +0100
++++ linux-mips/drivers/pcmcia/Config.in 2004-02-22 06:21:34.000000000 +0100
+@@ -30,16 +30,14 @@
+ dep_tristate ' M8xx support' CONFIG_PCMCIA_M8XX $CONFIG_PCMCIA
+ fi
+ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
+- dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
+- if [ "$CONFIG_PCMCIA_AU1X00" != "n" ]; then
+- bool ' Pb1x00 board support' CONFIG_PCMCIA_PB1X00
+- bool ' Db1x00 board support' CONFIG_PCMCIA_DB1X00
+- bool ' XXS1500 board support' CONFIG_PCMCIA_XXS1500
+- fi
++ dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
+ fi
+ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
+ dep_bool ' SiByte PCMCIA support' CONFIG_PCMCIA_SIBYTE $CONFIG_PCMCIA $CONFIG_BLK_DEV_IDE_SIBYTE
+ fi
++ if [ "$CONFIG_VRC4171" = "y" -o "$CONFIG_VRC4171" = "m" ]; then
++ dep_tristate ' NEC VRC4171 Card Controllers support' CONFIG_PCMCIA_VRC4171 $CONFIG_PCMCIA
++ fi
+ if [ "$CONFIG_VRC4173" = "y" -o "$CONFIG_VRC4173" = "m" ]; then
+ dep_tristate ' NEC VRC4173 CARDU support' CONFIG_PCMCIA_VRC4173 $CONFIG_PCMCIA
+ fi
+diff -Nur linux-2.4.29/drivers/pcmcia/Makefile linux-mips/drivers/pcmcia/Makefile
+--- linux-2.4.29/drivers/pcmcia/Makefile 2004-02-18 14:36:31.000000000 +0100
++++ linux-mips/drivers/pcmcia/Makefile 2005-02-03 07:35:30.000000000 +0100
+@@ -61,9 +61,18 @@
-@@ -5331,7 +5352,7 @@
- tw32(RCVDBDI_MODE, RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ);
- tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
- #if TG3_TSO_SUPPORT != 0
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
-+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
- #endif
- tw32(SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE);
-@@ -5381,8 +5402,10 @@
- udelay(10);
-
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
-+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) &&
-+ !(tp->tg3_flags2 & TG3_FLG2_SERDES_PREEMPHASIS)) {
- /* Set drive transmission level to 1.2V */
-+ /* only if the signal pre-emphasis bit is not set */
- val = tr32(MAC_SERDES_CFG);
- val &= 0xfffff000;
- val |= 0x880;
-@@ -5411,9 +5434,10 @@
- u32 tmp;
-
- /* Clear CRC stats. */
-- tg3_readphy(tp, 0x1e, &tmp);
-- tg3_writephy(tp, 0x1e, tmp | 0x8000);
-- tg3_readphy(tp, 0x14, &tmp);
-+ if (!tg3_readphy(tp, 0x1e, &tmp)) {
-+ tg3_writephy(tp, 0x1e, tmp | 0x8000);
-+ tg3_readphy(tp, 0x14, &tmp);
-+ }
- }
+ obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
+ au1000_ss-objs-y := au1000_generic.o
+-au1000_ss-objs-$(CONFIG_PCMCIA_PB1X00) += au1000_pb1x00.o
+-au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o
+-au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o
++au1000_ss-objs-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_PB1550) += au1000_pb1550.o
++au1000_ss-objs-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
++au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3) += au1000_hydrogen3.o
++au1000_ss-objs-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
- __tg3_set_rx_mode(tp->dev);
-@@ -6003,9 +6027,11 @@
- u32 val;
-
- spin_lock_irqsave(&tp->lock, flags);
-- tg3_readphy(tp, 0x1e, &val);
-- tg3_writephy(tp, 0x1e, val | 0x8000);
-- tg3_readphy(tp, 0x14, &val);
-+ if (!tg3_readphy(tp, 0x1e, &val)) {
-+ tg3_writephy(tp, 0x1e, val | 0x8000);
-+ tg3_readphy(tp, 0x14, &val);
-+ } else
-+ val = 0;
- spin_unlock_irqrestore(&tp->lock, flags);
+ obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
+ obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
+@@ -89,6 +98,7 @@
+ sa1100_cs-objs-$(CONFIG_SA1100_XP860) += sa1100_xp860.o sa1111_generic.o
+ sa1100_cs-objs-$(CONFIG_SA1100_YOPY) += sa1100_yopy.o
- tp->phy_crc_errors += val;
-@@ -6349,11 +6375,13 @@
++obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
+ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
- static int tg3_get_eeprom_len(struct net_device *dev)
- {
-- return EEPROM_CHIP_SIZE;
-+ struct tg3 *tp = netdev_priv(dev);
+ include $(TOPDIR)/Rules.make
+diff -Nur linux-2.4.29/drivers/pcmcia/vrc4171_card.c linux-mips/drivers/pcmcia/vrc4171_card.c
+--- linux-2.4.29/drivers/pcmcia/vrc4171_card.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-mips/drivers/pcmcia/vrc4171_card.c 2004-01-19 16:54:58.000000000 +0100
+@@ -0,0 +1,886 @@
++/*
++ * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
++ *
++ * Copyright (C) 2003 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/sched.h>
++#include <linux/types.h>
+
-+ return tp->nvram_size;
- }
-
--static int tg3_nvram_read_using_eeprom(struct tg3 *tp,
-- u32 offset, u32 *val);
-+static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val);
++#include <asm/io.h>
++#include <asm/vr41xx/vrc4171.h>
+
- static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
- {
- struct tg3 *tp = dev->priv;
-@@ -6365,10 +6393,7 @@
- len = eeprom->len;
- eeprom->len = 0;
-
-- ret = tg3_nvram_read_using_eeprom(tp, 0, &eeprom->magic);
-- if (ret)
-- return ret;
-- eeprom->magic = swab32(eeprom->magic);
-+ eeprom->magic = TG3_EEPROM_MAGIC;
-
- if (offset & 3) {
- /* adjustments to start on required 4 byte boundary */
-@@ -6378,9 +6403,10 @@
- /* i.e. offset=1 len=2 */
- b_count = len;
- }
-- ret = tg3_nvram_read_using_eeprom(tp, offset-b_offset, &val);
-+ ret = tg3_nvram_read(tp, offset-b_offset, &val);
- if (ret)
- return ret;
-+ val = cpu_to_le32(val);
- memcpy(data, ((char*)&val) + b_offset, b_count);
- len -= b_count;
- offset += b_count;
-@@ -6390,12 +6416,13 @@
- /* read bytes upto the last 4 byte boundary */
- pd = &data[eeprom->len];
- for (i = 0; i < (len - (len & 3)); i += 4) {
-- ret = tg3_nvram_read_using_eeprom(tp, offset + i,
-- (u32*)(pd + i));
-+ ret = tg3_nvram_read(tp, offset + i, &val);
- if (ret) {
- eeprom->len += i;
- return ret;
- }
-+ val = cpu_to_le32(val);
-+ memcpy(pd + i, &val, 4);
- }
- eeprom->len += i;
-
-@@ -6404,15 +6431,72 @@
- pd = &data[eeprom->len];
- b_count = len & 3;
- b_offset = offset + len - b_count;
-- ret = tg3_nvram_read_using_eeprom(tp, b_offset, &val);
-+ ret = tg3_nvram_read(tp, b_offset, &val);
- if (ret)
- return ret;
-+ val = cpu_to_le32(val);
- memcpy(pd, ((char*)&val), b_count);
- eeprom->len += b_count;
- }
- return 0;
- }
-
-+static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf);
++#include <pcmcia/ss.h>
+
-+static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
-+{
-+ struct tg3 *tp = netdev_priv(dev);
-+ int ret;
-+ u32 offset, len, b_offset, odd_len, start, end;
-+ u8 *buf;
++#include "i82365.h"
+
-+ if (eeprom->magic != TG3_EEPROM_MAGIC)
-+ return -EINVAL;
++MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
++MODULE_AUTHOR("Yoichi Yuasa <yuasa@hh.iij4u.or.jp>");
++MODULE_LICENSE("GPL");
+
-+ offset = eeprom->offset;
-+ len = eeprom->len;
-+
-+ if ((b_offset = (offset & 3))) {
-+ /* adjustments to start on required 4 byte boundary */
-+ ret = tg3_nvram_read(tp, offset-b_offset, &start);
-+ if (ret)
-+ return ret;
-+ start = cpu_to_le32(start);
-+ len += b_offset;
-+ offset &= ~3;
-+ }
++#define CARD_MAX_SLOTS 2
++#define CARD_SLOTA 0
++#define CARD_SLOTB 1
++#define CARD_SLOTB_OFFSET 0x40
+
-+ odd_len = 0;
-+ if ((len & 3) && ((len > 4) || (b_offset == 0))) {
-+ /* adjustments to end on required 4 byte boundary */
-+ odd_len = 1;
-+ len = (len + 3) & ~3;
-+ ret = tg3_nvram_read(tp, offset+len-4, &end);
-+ if (ret)
-+ return ret;
-+ end = cpu_to_le32(end);
-+ }
++#define CARD_MEM_START 0x10000000
++#define CARD_MEM_END 0x13ffffff
++#define CARD_MAX_MEM_OFFSET 0x3ffffff
++#define CARD_MAX_MEM_SPEED 1000
+
-+ buf = data;
-+ if (b_offset || odd_len) {
-+ buf = kmalloc(len, GFP_KERNEL);
-+ if (buf == 0)
-+ return -ENOMEM;
-+ if (b_offset)
-+ memcpy(buf, &start, 4);
-+ if (odd_len)
-+ memcpy(buf+len-4, &end, 4);
-+ memcpy(buf + b_offset, data, eeprom->len);
-+ }
++#define CARD_CONTROLLER_INDEX 0x03e0
++#define CARD_CONTROLLER_DATA 0x03e1
++#define CARD_CONTROLLER_SIZE 2
++ /* Power register */
++ #define VPP_GET_VCC 0x01
++ #define POWER_ENABLE 0x10
++ #define CARD_VOLTAGE_SENSE 0x1f
++ #define VCC_3VORXV_CAPABLE 0x00
++ #define VCC_XV_ONLY 0x01
++ #define VCC_3V_CAPABLE 0x02
++ #define VCC_5V_ONLY 0x03
++ #define CARD_VOLTAGE_SELECT 0x2f
++ #define VCC_3V 0x01
++ #define VCC_5V 0x00
++ #define VCC_XV 0x02
++ #define VCC_STATUS_3V 0x02
++ #define VCC_STATUS_5V 0x01
++ #define VCC_STATUS_XV 0x03
++ #define GLOBAL_CONTROL 0x1e
++ #define EXWRBK 0x04
++ #define IRQPM_EN 0x08
++ #define CLRPMIRQ 0x10
+
-+ ret = tg3_nvram_write_block(tp, offset, len, buf);
++#define IO_MAX_MAPS 2
++#define MEM_MAX_MAPS 5
+
-+ if (buf != data)
-+ kfree(buf);
++enum {
++ SLOTB_PROBE = 0,
++ SLOTB_NOPROBE_IO,
++ SLOTB_NOPROBE_MEM,
++ SLOTB_NOPROBE_ALL
++};
+
-+ return ret;
-+}
++typedef struct vrc4171_socket {
++ int noprobe;
++ void (*handler)(void *, unsigned int);
++ void *info;
++ socket_cap_t cap;
++ spinlock_t event_lock;
++ uint16_t events;
++ struct socket_info_t *pcmcia_socket;
++ struct tq_struct tq_task;
++ char name[24];
++ int csc_irq;
++ int io_irq;
++} vrc4171_socket_t;
+
- static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct tg3 *tp = netdev_priv(dev);
-@@ -6561,10 +6645,10 @@
- int r;
-
- spin_lock_irq(&tp->lock);
-- tg3_readphy(tp, MII_BMCR, &bmcr);
-- tg3_readphy(tp, MII_BMCR, &bmcr);
- r = -EINVAL;
-- if (bmcr & BMCR_ANENABLE) {
-+ tg3_readphy(tp, MII_BMCR, &bmcr);
-+ if (!tg3_readphy(tp, MII_BMCR, &bmcr) &&
-+ (bmcr & BMCR_ANENABLE)) {
- tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANRESTART);
- r = 0;
- }
-@@ -6812,6 +6896,7 @@
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = tg3_get_eeprom_len,
- .get_eeprom = tg3_get_eeprom,
-+ .set_eeprom = tg3_set_eeprom,
- .get_ringparam = tg3_get_ringparam,
- .set_ringparam = tg3_set_ringparam,
- .get_pauseparam = tg3_get_pauseparam,
-@@ -6831,6 +6916,103 @@
- .get_ethtool_stats = tg3_get_ethtool_stats,
- };
-
-+static void __devinit tg3_get_eeprom_size(struct tg3 *tp)
-+{
-+ u32 cursize, val;
-+
-+ tp->nvram_size = EEPROM_CHIP_SIZE;
-+
-+ if (tg3_nvram_read(tp, 0, &val) != 0)
-+ return;
-+
-+ if (swab32(val) != TG3_EEPROM_MAGIC)
-+ return;
-+
-+ /*
-+ * Size the chip by reading offsets at increasing powers of two.
-+ * When we encounter our validation signature, we know the addressing
-+ * has wrapped around, and thus have our chip size.
-+ */
-+ cursize = 0x800;
-+
-+ while (cursize < tp->nvram_size) {
-+ if (tg3_nvram_read(tp, cursize, &val) != 0)
-+ return;
-+
-+ if (swab32(val) == TG3_EEPROM_MAGIC)
-+ break;
++static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
++static int vrc4171_slotb = SLOTB_IS_NONE;
++static unsigned int vrc4171_irq;
++static uint16_t vrc4171_irq_mask = 0xdeb8;
+
-+ cursize <<= 1;
-+ }
++extern struct socket_info_t *pcmcia_register_socket(int slot,
++ struct pccard_operations *vtable,
++ int use_bus_pm);
++extern void pcmcia_unregister_socket(struct socket_info_t *s);
+
-+ tp->nvram_size = cursize;
-+}
-+
-+static void __devinit tg3_get_nvram_size(struct tg3 *tp)
++static inline uint8_t exca_read_byte(int slot, uint8_t index)
+{
-+ u32 val;
++ if (slot == CARD_SLOTB)
++ index += CARD_SLOTB_OFFSET;
+
-+ if (tg3_nvram_read(tp, 0xf0, &val) == 0) {
-+ if (val != 0) {
-+ tp->nvram_size = (val >> 16) * 1024;
-+ return;
-+ }
-+ }
-+ tp->nvram_size = 0x20000;
++ outb(index, CARD_CONTROLLER_INDEX);
++ return inb(CARD_CONTROLLER_DATA);
+}
+
-+static void __devinit tg3_get_nvram_info(struct tg3 *tp)
++static inline uint16_t exca_read_word(int slot, uint8_t index)
+{
-+ u32 nvcfg1;
-+
-+ nvcfg1 = tr32(NVRAM_CFG1);
-+ if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
-+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
-+ }
-+ else {
-+ nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
-+ tw32(NVRAM_CFG1, nvcfg1);
-+ }
-+
-+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
-+ switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
-+ case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
-+ tp->nvram_jedecnum = JEDEC_ATMEL;
-+ tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
-+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-+ break;
-+ case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
-+ tp->nvram_jedecnum = JEDEC_ATMEL;
-+ tp->nvram_pagesize = ATMEL_AT25F512_PAGE_SIZE;
-+ break;
-+ case FLASH_VENDOR_ATMEL_EEPROM:
-+ tp->nvram_jedecnum = JEDEC_ATMEL;
-+ tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
-+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-+ break;
-+ case FLASH_VENDOR_ST:
-+ tp->nvram_jedecnum = JEDEC_ST;
-+ tp->nvram_pagesize = ST_M45PEX0_PAGE_SIZE;
-+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-+ break;
-+ case FLASH_VENDOR_SAIFUN:
-+ tp->nvram_jedecnum = JEDEC_SAIFUN;
-+ tp->nvram_pagesize = SAIFUN_SA25F0XX_PAGE_SIZE;
-+ break;
-+ case FLASH_VENDOR_SST_SMALL:
-+ case FLASH_VENDOR_SST_LARGE:
-+ tp->nvram_jedecnum = JEDEC_SST;
-+ tp->nvram_pagesize = SST_25VF0X0_PAGE_SIZE;
-+ break;
-+ }
-+ }
-+ else {
-+ tp->nvram_jedecnum = JEDEC_ATMEL;
-+ tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
-+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-+ }
-+}
++ uint16_t data;
+
- /* Chips other than 5700/5701 use the NVRAM for fetching info. */
- static void __devinit tg3_nvram_init(struct tg3 *tp)
- {
-@@ -6855,32 +7037,27 @@
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
-- u32 nvcfg1;
-+ tp->tg3_flags |= TG3_FLAG_NVRAM;
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
- u32 nvaccess = tr32(NVRAM_ACCESS);
-
-- tw32_f(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
-+ tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
- }
-
-- nvcfg1 = tr32(NVRAM_CFG1);
--
-- tp->tg3_flags |= TG3_FLAG_NVRAM;
-- if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
-- if (nvcfg1 & NVRAM_CFG1_BUFFERED_MODE)
-- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-- } else {
-- nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
-- tw32(NVRAM_CFG1, nvcfg1);
-- }
-+ tg3_get_nvram_info(tp);
-+ tg3_get_nvram_size(tp);
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
- u32 nvaccess = tr32(NVRAM_ACCESS);
-
-- tw32_f(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
-+ tw32(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
- }
++ if (slot == CARD_SLOTB)
++ index += CARD_SLOTB_OFFSET;
+
- } else {
- tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
++ outb(index++, CARD_CONTROLLER_INDEX);
++ data = inb(CARD_CONTROLLER_DATA);
+
-+ tg3_get_eeprom_size(tp);
- }
- }
-
-@@ -6918,11 +7095,30 @@
- return 0;
- }
-
--static int __devinit tg3_nvram_read(struct tg3 *tp,
-- u32 offset, u32 *val)
-+#define NVRAM_CMD_TIMEOUT 10000
++ outb(index, CARD_CONTROLLER_INDEX);
++ data |= ((uint16_t)inb(CARD_CONTROLLER_DATA)) << 8;
+
-+static int tg3_nvram_exec_cmd(struct tg3 *tp, u32 nvram_cmd)
- {
- int i;
-
-+ tw32(NVRAM_CMD, nvram_cmd);
-+ for (i = 0; i < NVRAM_CMD_TIMEOUT; i++) {
-+ udelay(10);
-+ if (tr32(NVRAM_CMD) & NVRAM_CMD_DONE) {
-+ udelay(10);
-+ break;
-+ }
-+ }
-+ if (i == NVRAM_CMD_TIMEOUT) {
-+ return -EBUSY;
-+ }
-+ return 0;
++ return data;
+}
+
-+static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
++static inline uint8_t exca_write_byte(int slot, uint8_t index, uint8_t data)
+{
-+ int ret;
++ if (slot == CARD_SLOTB)
++ index += CARD_SLOTB_OFFSET;
+
- if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
- printk(KERN_ERR PFX "Attempt to do nvram_read on Sun 570X\n");
- return -EINVAL;
-@@ -6931,10 +7127,14 @@
- if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
- return tg3_nvram_read_using_eeprom(tp, offset, val);
-
-- if (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED)
-- offset = ((offset / NVRAM_BUFFERED_PAGE_SIZE) <<
-- NVRAM_BUFFERED_PAGE_POS) +
-- (offset % NVRAM_BUFFERED_PAGE_SIZE);
-+ if ((tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
-+ (tp->tg3_flags2 & TG3_FLG2_FLASH) &&
-+ (tp->nvram_jedecnum == JEDEC_ATMEL)) {
-+
-+ offset = ((offset / tp->nvram_pagesize) <<
-+ ATMEL_AT45DB0X1B_PAGE_POS) +
-+ (offset % tp->nvram_pagesize);
-+ }
-
- if (offset > NVRAM_ADDR_MSK)
- return -EINVAL;
-@@ -6948,19 +7148,11 @@
- }
-
- tw32(NVRAM_ADDR, offset);
-- tw32(NVRAM_CMD,
-- NVRAM_CMD_RD | NVRAM_CMD_GO |
-- NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
-+ ret = tg3_nvram_exec_cmd(tp, NVRAM_CMD_RD | NVRAM_CMD_GO |
-+ NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
-
-- /* Wait for done bit to clear. */
-- for (i = 0; i < 1000; i++) {
-- udelay(10);
-- if (tr32(NVRAM_CMD) & NVRAM_CMD_DONE) {
-- udelay(10);
-- *val = swab32(tr32(NVRAM_RDDATA));
-- break;
-- }
-- }
-+ if (ret == 0)
-+ *val = swab32(tr32(NVRAM_RDDATA));
-
- tg3_nvram_unlock(tp);
-
-@@ -6970,10 +7162,268 @@
- tw32_f(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
- }
-
-- if (i >= 1000)
-- return -EBUSY;
-+ return ret;
-+}
-
-- return 0;
-+static int tg3_nvram_write_block_using_eeprom(struct tg3 *tp,
-+ u32 offset, u32 len, u8 *buf)
-+{
-+ int i, j, rc = 0;
-+ u32 val;
++ outb(index, CARD_CONTROLLER_INDEX);
++ outb(data, CARD_CONTROLLER_DATA);
+
-+ for (i = 0; i < len; i += 4) {
-+ u32 addr, data;
++ return data;
++}
+
-+ addr = offset + i;
++static inline uint16_t exca_write_word(int slot, uint8_t index, uint16_t data)
++{
++ if (slot == CARD_SLOTB)
++ index += CARD_SLOTB_OFFSET;
+
-+ memcpy(&data, buf + i, 4);
++ outb(index++, CARD_CONTROLLER_INDEX);
++ outb(data, CARD_CONTROLLER_DATA);
+
-+ tw32(GRC_EEPROM_DATA, cpu_to_le32(data));
++ outb(index, CARD_CONTROLLER_INDEX);
++ outb((uint8_t)(data >> 8), CARD_CONTROLLER_DATA);
+
-+ val = tr32(GRC_EEPROM_ADDR);
-+ tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
++ return data;
++}
+
-+ val &= ~(EEPROM_ADDR_ADDR_MASK | EEPROM_ADDR_DEVID_MASK |
-+ EEPROM_ADDR_READ);
-+ tw32(GRC_EEPROM_ADDR, val |
-+ (0 << EEPROM_ADDR_DEVID_SHIFT) |
-+ (addr & EEPROM_ADDR_ADDR_MASK) |
-+ EEPROM_ADDR_START |
-+ EEPROM_ADDR_WRITE);
-+
-+ for (j = 0; j < 10000; j++) {
-+ val = tr32(GRC_EEPROM_ADDR);
++static inline int search_nonuse_irq(void)
++{
++ int i;
+
-+ if (val & EEPROM_ADDR_COMPLETE)
-+ break;
-+ udelay(100);
-+ }
-+ if (!(val & EEPROM_ADDR_COMPLETE)) {
-+ rc = -EBUSY;
-+ break;
++ for (i = 0; i < 16; i++) {
++ if (vrc4171_irq_mask & (1 << i)) {
++ vrc4171_irq_mask &= ~(1 << i);
++ return i;
+ }
+ }
+
-+ return rc;
++ return -1;
+}
+
-+/* offset and length are dword aligned */
-+static int tg3_nvram_write_block_unbuffered(struct tg3 *tp, u32 offset, u32 len,
-+ u8 *buf)
++static int pccard_init(unsigned int slot)
+{
-+ int ret = 0;
-+ u32 pagesize = tp->nvram_pagesize;
-+ u32 pagemask = pagesize - 1;
-+ u32 nvram_cmd;
-+ u8 *tmp;
++ vrc4171_socket_t *socket = &vrc4171_sockets[slot];
+
-+ tmp = kmalloc(pagesize, GFP_KERNEL);
-+ if (tmp == NULL)
-+ return -ENOMEM;
++ socket->cap.features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS;
++ socket->cap.irq_mask = 0;
++ socket->cap.pci_irq = vrc4171_irq;
++ socket->cap.map_size = 0x1000;
++ socket->events = 0;
++ spin_lock_init(socket->event_lock);
++ socket->csc_irq = search_nonuse_irq();
++ socket->io_irq = search_nonuse_irq();
+
-+ while (len) {
-+ int j;
-+ u32 phy_addr, page_off, size, nvaccess;
++ return 0;
++}
+
-+ phy_addr = offset & ~pagemask;
-+
-+ for (j = 0; j < pagesize; j += 4) {
-+ if ((ret = tg3_nvram_read(tp, phy_addr + j,
-+ (u32 *) (tmp + j))))
-+ break;
-+ }
-+ if (ret)
-+ break;
++static int pccard_suspend(unsigned int slot)
++{
++ return -EINVAL;
++}
+
-+ page_off = offset & pagemask;
-+ size = pagesize;
-+ if (len < size)
-+ size = len;
++static int pccard_register_callback(unsigned int slot,
++ void (*handler)(void *, unsigned int),
++ void *info)
++{
++ vrc4171_socket_t *socket;
+
-+ len -= size;
++ if (slot >= CARD_MAX_SLOTS)
++ return -EINVAL;
+
-+ memcpy(tmp + page_off, buf, size);
++ socket = &vrc4171_sockets[slot];
+
-+ offset = offset + (pagesize - page_off);
++ socket->handler = handler;
++ socket->info = info;
+
-+ nvaccess = tr32(NVRAM_ACCESS);
-+ tw32_f(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
++ if (handler)
++ MOD_INC_USE_COUNT;
++ else
++ MOD_DEC_USE_COUNT;
+
-+ /*
-+ * Before we can erase the flash page, we need
-+ * to issue a special "write enable" command.
-+ */
-+ nvram_cmd = NVRAM_CMD_WREN | NVRAM_CMD_GO | NVRAM_CMD_DONE;
++ return 0;
++}
+
-+ if (tg3_nvram_exec_cmd(tp, nvram_cmd))
-+ break;
++static int pccard_inquire_socket(unsigned int slot, socket_cap_t *cap)
++{
++ vrc4171_socket_t *socket;
+
-+ /* Erase the target page */
-+ tw32(NVRAM_ADDR, phy_addr);
++ if (slot >= CARD_MAX_SLOTS || cap == NULL)
++ return -EINVAL;
+
-+ nvram_cmd = NVRAM_CMD_GO | NVRAM_CMD_DONE | NVRAM_CMD_WR |
-+ NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_ERASE;
++ socket = &vrc4171_sockets[slot];
+
-+ if (tg3_nvram_exec_cmd(tp, nvram_cmd))
-+ break;
++ *cap = socket->cap;
+
-+ /* Issue another write enable to start the write. */
-+ nvram_cmd = NVRAM_CMD_WREN | NVRAM_CMD_GO | NVRAM_CMD_DONE;
++ return 0;
++}
+
-+ if (tg3_nvram_exec_cmd(tp, nvram_cmd))
-+ break;
++static int pccard_get_status(unsigned int slot, u_int *value)
++{
++ uint8_t status, sense;
++ u_int val = 0;
+
-+ for (j = 0; j < pagesize; j += 4) {
-+ u32 data;
++ if (slot >= CARD_MAX_SLOTS || value == NULL)
++ return -EINVAL;
+
-+ data = *((u32 *) (tmp + j));
-+ tw32(NVRAM_WRDATA, cpu_to_be32(data));
++ status = exca_read_byte(slot, I365_STATUS);
++ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
++ if (status & I365_CS_STSCHG)
++ val |= SS_STSCHG;
++ } else {
++ if (!(status & I365_CS_BVD1))
++ val |= SS_BATDEAD;
++ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
++ val |= SS_BATWARN;
++ }
++ if ((status & I365_CS_DETECT) == I365_CS_DETECT)
++ val |= SS_DETECT;
++ if (status & I365_CS_WRPROT)
++ val |= SS_WRPROT;
++ if (status & I365_CS_READY)
++ val |= SS_READY;
++ if (status & I365_CS_POWERON)
++ val |= SS_POWERON;
+
-+ tw32(NVRAM_ADDR, phy_addr + j);
++ sense = exca_read_byte(slot, CARD_VOLTAGE_SENSE);
++ switch (sense) {
++ case VCC_3VORXV_CAPABLE:
++ val |= SS_3VCARD | SS_XVCARD;
++ break;
++ case VCC_XV_ONLY:
++ val |= SS_XVCARD;
++ break;
++ case VCC_3V_CAPABLE:
++ val |= SS_3VCARD;
++ break;
++ default:
++ /* 5V only */
++ break;
++ }
+
-+ nvram_cmd = NVRAM_CMD_GO | NVRAM_CMD_DONE |
-+ NVRAM_CMD_WR;
++ *value = val;
+
-+ if (j == 0)
-+ nvram_cmd |= NVRAM_CMD_FIRST;
-+ else if (j == (pagesize - 4))
-+ nvram_cmd |= NVRAM_CMD_LAST;
++ return 0;
++}
+
-+ if ((ret = tg3_nvram_exec_cmd(tp, nvram_cmd)))
-+ break;
-+ }
-+ if (ret)
-+ break;
++static inline u_char get_Vcc_value(uint8_t voltage)
++{
++ switch (voltage) {
++ case VCC_STATUS_3V:
++ return 33;
++ case VCC_STATUS_5V:
++ return 50;
++ default:
++ break;
+ }
+
-+ nvram_cmd = NVRAM_CMD_WRDI | NVRAM_CMD_GO | NVRAM_CMD_DONE;
-+ tg3_nvram_exec_cmd(tp, nvram_cmd);
++ return 0;
++}
+
-+ kfree(tmp);
++static inline u_char get_Vpp_value(uint8_t power, u_char Vcc)
++{
++ if ((power & 0x03) == 0x01 || (power & 0x03) == 0x02)
++ return Vcc;
+
-+ return ret;
++ return 0;
+}
+
-+/* offset and length are dword aligned */
-+static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
-+ u8 *buf)
++static int pccard_get_socket(unsigned int slot, socket_state_t *state)
+{
-+ int i, ret = 0;
++ vrc4171_socket_t *socket;
++ uint8_t power, voltage, control, cscint;
+
-+ for (i = 0; i < len; i += 4, offset += 4) {
-+ u32 data, page_off, phy_addr, nvram_cmd;
++ if (slot >= CARD_MAX_SLOTS || state == NULL)
++ return -EINVAL;
+
-+ memcpy(&data, buf + i, 4);
-+ tw32(NVRAM_WRDATA, cpu_to_be32(data));
++ socket = &vrc4171_sockets[slot];
+
-+ page_off = offset % tp->nvram_pagesize;
++ power = exca_read_byte(slot, I365_POWER);
++ voltage = exca_read_byte(slot, CARD_VOLTAGE_SELECT);
+
-+ if ((tp->tg3_flags2 & TG3_FLG2_FLASH) &&
-+ (tp->nvram_jedecnum == JEDEC_ATMEL)) {
++ state->Vcc = get_Vcc_value(voltage);
++ state->Vpp = get_Vpp_value(power, state->Vcc);
+
-+ phy_addr = ((offset / tp->nvram_pagesize) <<
-+ ATMEL_AT45DB0X1B_PAGE_POS) + page_off;
-+ }
-+ else {
-+ phy_addr = offset;
-+ }
++ state->flags = 0;
++ if (power & POWER_ENABLE)
++ state->flags |= SS_PWR_AUTO;
++ if (power & I365_PWR_OUT)
++ state->flags |= SS_OUTPUT_ENA;
++
++ control = exca_read_byte(slot, I365_INTCTL);
++ if (control & I365_PC_IOCARD)
++ state->flags |= SS_IOCARD;
++ if (!(control & I365_PC_RESET))
++ state->flags |= SS_RESET;
++
++ cscint = exca_read_byte(slot, I365_CSCINT);
++ state->csc_mask = 0;
++ if (state->flags & SS_IOCARD) {
++ if (cscint & I365_CSC_STSCHG)
++ state->flags |= SS_STSCHG;
++ } else {
++ if (cscint & I365_CSC_BVD1)
++ state->csc_mask |= SS_BATDEAD;
++ if (cscint & I365_CSC_BVD2)
++ state->csc_mask |= SS_BATWARN;
++ }
++ if (cscint & I365_CSC_READY)
++ state->csc_mask |= SS_READY;
++ if (cscint & I365_CSC_DETECT)
++ state->csc_mask |= SS_DETECT;
++
++ return 0;
++}
+
-+ tw32(NVRAM_ADDR, phy_addr);
++static inline uint8_t set_Vcc_value(u_char Vcc)
++{
++ switch (Vcc) {
++ case 33:
++ return VCC_3V;
++ case 50:
++ return VCC_5V;
++ }
+
-+ nvram_cmd = NVRAM_CMD_GO | NVRAM_CMD_DONE | NVRAM_CMD_WR;
++ /* Small voltage is chosen for safety. */
++ return VCC_3V;
++}
+
-+ if ((page_off == 0) || (i == 0))
-+ nvram_cmd |= NVRAM_CMD_FIRST;
-+ else if (page_off == (tp->nvram_pagesize - 4))
-+ nvram_cmd |= NVRAM_CMD_LAST;
++static int pccard_set_socket(unsigned int slot, socket_state_t *state)
++{
++ vrc4171_socket_t *socket;
++ uint8_t voltage, power, control, cscint;
+
-+ if (i == (len - 4))
-+ nvram_cmd |= NVRAM_CMD_LAST;
++ if (slot >= CARD_MAX_SLOTS ||
++ (state->Vpp != state->Vcc && state->Vpp != 0) ||
++ (state->Vcc != 50 && state->Vcc != 33 && state->Vcc != 0))
++ return -EINVAL;
+
-+ if ((tp->nvram_jedecnum == JEDEC_ST) &&
-+ (nvram_cmd & NVRAM_CMD_FIRST)) {
++ socket = &vrc4171_sockets[slot];
+
-+ if ((ret = tg3_nvram_exec_cmd(tp,
-+ NVRAM_CMD_WREN | NVRAM_CMD_GO |
-+ NVRAM_CMD_DONE)))
++ spin_lock_irq(&socket->event_lock);
+
-+ break;
-+ }
-+ if (!(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
-+ /* We always do complete word writes to eeprom. */
-+ nvram_cmd |= (NVRAM_CMD_FIRST | NVRAM_CMD_LAST);
-+ }
++ voltage = set_Vcc_value(state->Vcc);
++ exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage);
+
-+ if ((ret = tg3_nvram_exec_cmd(tp, nvram_cmd)))
-+ break;
++ power = POWER_ENABLE;
++ if (state->Vpp == state->Vcc)
++ power |= VPP_GET_VCC;
++ if (state->flags & SS_OUTPUT_ENA)
++ power |= I365_PWR_OUT;
++ exca_write_byte(slot, I365_POWER, power);
++
++ control = 0;
++ if (state->io_irq != 0)
++ control |= socket->io_irq;
++ if (state->flags & SS_IOCARD)
++ control |= I365_PC_IOCARD;
++ if (state->flags & SS_RESET)
++ control &= ~I365_PC_RESET;
++ else
++ control |= I365_PC_RESET;
++ exca_write_byte(slot, I365_INTCTL, control);
++
++ cscint = 0;
++ exca_write_byte(slot, I365_CSCINT, cscint);
++ exca_read_byte(slot, I365_CSC); /* clear CardStatus change */
++ if (state->csc_mask != 0)
++ cscint |= socket->csc_irq << 8;
++ if (state->flags & SS_IOCARD) {
++ if (state->csc_mask & SS_STSCHG)
++ cscint |= I365_CSC_STSCHG;
++ } else {
++ if (state->csc_mask & SS_BATDEAD)
++ cscint |= I365_CSC_BVD1;
++ if (state->csc_mask & SS_BATWARN)
++ cscint |= I365_CSC_BVD2;
+ }
-+ return ret;
++ if (state->csc_mask & SS_READY)
++ cscint |= I365_CSC_READY;
++ if (state->csc_mask & SS_DETECT)
++ cscint |= I365_CSC_DETECT;
++ exca_write_byte(slot, I365_CSCINT, cscint);
++
++ spin_unlock_irq(&socket->event_lock);
++
++ return 0;
+}
+
-+/* offset and length are dword aligned */
-+static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
++static int pccard_get_io_map(unsigned int slot, struct pccard_io_map *io)
+{
-+ int ret;
++ vrc4171_socket_t *socket;
++ uint8_t ioctl, addrwin;
++ u_char map;
+
-+ if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
-+ printk(KERN_ERR PFX "Attempt to do nvram_write on Sun 570X\n");
++ if (slot >= CARD_MAX_SLOTS || io == NULL ||
++ io->map >= IO_MAX_MAPS)
+ return -EINVAL;
-+ }
+
-+ if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
-+ tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
-+ GRC_LCLCTRL_GPIO_OE1);
-+ udelay(40);
-+ }
++ socket = &vrc4171_sockets[slot];
++ map = io->map;
+
-+ if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) {
-+ ret = tg3_nvram_write_block_using_eeprom(tp, offset, len, buf);
-+ }
-+ else {
-+ u32 grc_mode;
++ io->start = exca_read_word(slot, I365_IO(map)+I365_W_START);
++ io->stop = exca_read_word(slot, I365_IO(map)+I365_W_STOP);
+
-+ tg3_nvram_lock(tp);
++ ioctl = exca_read_byte(slot, I365_IOCTL);
++ if (io->flags & I365_IOCTL_WAIT(map))
++ io->speed = 1;
++ else
++ io->speed = 0;
+
-+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
-+ u32 nvaccess = tr32(NVRAM_ACCESS);
++ io->flags = 0;
++ if (ioctl & I365_IOCTL_16BIT(map))
++ io->flags |= MAP_16BIT;
++ if (ioctl & I365_IOCTL_IOCS16(map))
++ io->flags |= MAP_AUTOSZ;
++ if (ioctl & I365_IOCTL_0WS(map))
++ io->flags |= MAP_0WS;
+
-+ tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
++ addrwin = exca_read_byte(slot, I365_ADDRWIN);
++ if (addrwin & I365_ENA_IO(map))
++ io->flags |= MAP_ACTIVE;
+
-+ tw32(NVRAM_WRITE1, 0x406);
-+ }
++ return 0;
++}
+
-+ grc_mode = tr32(GRC_MODE);
-+ tw32(GRC_MODE, grc_mode | GRC_MODE_NVRAM_WR_ENABLE);
++static int pccard_set_io_map(unsigned int slot, struct pccard_io_map *io)
++{
++ vrc4171_socket_t *socket;
++ uint8_t ioctl, addrwin;
++ u_char map;
+
-+ if ((tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) ||
-+ !(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
++ if (slot >= CARD_MAX_SLOTS ||
++ io == NULL || io->map >= IO_MAX_MAPS ||
++ io->start > 0xffff || io->stop > 0xffff || io->start > io->stop)
++ return -EINVAL;
+
-+ ret = tg3_nvram_write_block_buffered(tp, offset, len,
-+ buf);
-+ }
-+ else {
-+ ret = tg3_nvram_write_block_unbuffered(tp, offset, len,
-+ buf);
-+ }
++ socket = &vrc4171_sockets[slot];
++ map = io->map;
+
-+ grc_mode = tr32(GRC_MODE);
-+ tw32(GRC_MODE, grc_mode & ~GRC_MODE_NVRAM_WR_ENABLE);
++ addrwin = exca_read_byte(slot, I365_ADDRWIN);
++ if (addrwin & I365_ENA_IO(map)) {
++ addrwin &= ~I365_ENA_IO(map);
++ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ }
+
-+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
-+ u32 nvaccess = tr32(NVRAM_ACCESS);
++ exca_write_word(slot, I365_IO(map)+I365_W_START, io->start);
++ exca_write_word(slot, I365_IO(map)+I365_W_STOP, io->stop);
+
-+ tw32(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
-+ }
-+ tg3_nvram_unlock(tp);
-+ }
++ ioctl = 0;
++ if (io->speed > 0)
++ ioctl |= I365_IOCTL_WAIT(map);
++ if (io->flags & MAP_16BIT)
++ ioctl |= I365_IOCTL_16BIT(map);
++ if (io->flags & MAP_AUTOSZ)
++ ioctl |= I365_IOCTL_IOCS16(map);
++ if (io->flags & MAP_0WS)
++ ioctl |= I365_IOCTL_0WS(map);
++ exca_write_byte(slot, I365_IOCTL, ioctl);
+
-+ if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
-+ tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
-+ GRC_LCLCTRL_GPIO_OE1 | GRC_LCLCTRL_GPIO_OUTPUT1);
-+ udelay(40);
++ if (io->flags & MAP_ACTIVE) {
++ addrwin |= I365_ENA_IO(map);
++ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ }
+
-+ return ret;
- }
-
- struct subsys_tbl_ent {
-@@ -7047,11 +7497,19 @@
- tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
- if (val == NIC_SRAM_DATA_SIG_MAGIC) {
- u32 nic_cfg, led_cfg;
-- u32 nic_phy_id, cfg2;
-+ u32 nic_phy_id, ver, cfg2 = 0;
-
- tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
- tp->nic_sram_data_cfg = nic_cfg;
-
-+ tg3_read_mem(tp, NIC_SRAM_DATA_VER, &ver);
-+ ver >>= NIC_SRAM_DATA_VER_SHIFT;
-+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
-+ (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
-+ (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703) &&
-+ (ver > 0) && (ver < 0x100))
-+ tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &cfg2);
-+
- eeprom_signature_found = 1;
-
- if ((nic_cfg & NIC_SRAM_DATA_CFG_PHY_TYPE_MASK) ==
-@@ -7070,8 +7528,7 @@
- eeprom_phy_id = 0;
-
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
-- tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &led_cfg);
-- led_cfg &= (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
-+ led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
- SHASTA_EXT_LED_MODE_MASK);
- } else
- led_cfg = nic_cfg & NIC_SRAM_DATA_CFG_LED_MODE_MASK;
-@@ -7116,9 +7573,8 @@
- tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
- tp->led_ctrl = LED_CTRL_MODE_PHY_2;
-
-- if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
-- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
-- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) &&
-+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
-+ (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
- (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP))
- tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
-
-@@ -7130,9 +7586,13 @@
- if (nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL)
- tp->tg3_flags |= TG3_FLAG_SERDES_WOL_CAP;
-
-- tg3_read_mem(tp, NIC_SRAM_DATA_PHY_ID, &cfg2);
- if (cfg2 & (1 << 17))
- tp->tg3_flags2 |= TG3_FLG2_CAPACITIVE_COUPLING;
-+
-+ /* serdes signal pre-emphasis in register 0x590 set by */
-+ /* bootcode if bit 18 is set */
-+ if (cfg2 & (1 << 18))
-+ tp->tg3_flags2 |= TG3_FLG2_SERDES_PREEMPHASIS;
- }
-
- /* Reading the PHY ID register can conflict with ASF
-@@ -7188,9 +7648,8 @@
- u32 bmsr, adv_reg, tg3_ctrl;
-
- tg3_readphy(tp, MII_BMSR, &bmsr);
-- tg3_readphy(tp, MII_BMSR, &bmsr);
--
-- if (bmsr & BMSR_LSTATUS)
-+ if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
-+ (bmsr & BMSR_LSTATUS))
- goto skip_phy_reset;
-
- err = tg3_phy_reset(tp);
-@@ -7414,6 +7873,9 @@
- tp->pci_hdr_type = (cacheline_sz_reg >> 16) & 0xff;
- tp->pci_bist = (cacheline_sz_reg >> 24) & 0xff;
-
-+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
-+ tp->tg3_flags2 |= TG3_FLG2_HW_TSO;
-+
- if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0)
- tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
-
-@@ -8302,11 +8764,13 @@
- }
-
- #if TG3_TSO_SUPPORT != 0
-- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
-+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
-+ tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
-+ }
-+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5705_A0 ||
-- ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 &&
-- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750)) {
-+ (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
- tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
- } else {
- tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
-diff -Nur linux-2.4.29/drivers/net/tg3.h linux-mips/drivers/net/tg3.h
---- linux-2.4.29/drivers/net/tg3.h 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/net/tg3.h 2005-03-26 11:47:30.485648346 +0100
-@@ -1274,6 +1274,7 @@
- #define GRC_MODE_HOST_STACKUP 0x00010000
- #define GRC_MODE_HOST_SENDBDS 0x00020000
- #define GRC_MODE_NO_TX_PHDR_CSUM 0x00100000
-+#define GRC_MODE_NVRAM_WR_ENABLE 0x00200000
- #define GRC_MODE_NO_RX_PHDR_CSUM 0x00800000
- #define GRC_MODE_IRQ_ON_TX_CPU_ATTN 0x01000000
- #define GRC_MODE_IRQ_ON_RX_CPU_ATTN 0x02000000
-@@ -1366,6 +1367,8 @@
- #define NVRAM_CMD_ERASE 0x00000040
- #define NVRAM_CMD_FIRST 0x00000080
- #define NVRAM_CMD_LAST 0x00000100
-+#define NVRAM_CMD_WREN 0x00010000
-+#define NVRAM_CMD_WRDI 0x00020000
- #define NVRAM_STAT 0x00007004
- #define NVRAM_WRDATA 0x00007008
- #define NVRAM_ADDR 0x0000700c
-@@ -1375,8 +1378,18 @@
- #define NVRAM_CFG1_FLASHIF_ENAB 0x00000001
- #define NVRAM_CFG1_BUFFERED_MODE 0x00000002
- #define NVRAM_CFG1_PASS_THRU 0x00000004
-+#define NVRAM_CFG1_STATUS_BITS 0x00000070
- #define NVRAM_CFG1_BIT_BANG 0x00000008
-+#define NVRAM_CFG1_FLASH_SIZE 0x02000000
- #define NVRAM_CFG1_COMPAT_BYPASS 0x80000000
-+#define NVRAM_CFG1_VENDOR_MASK 0x03000003
-+#define FLASH_VENDOR_ATMEL_EEPROM 0x02000000
-+#define FLASH_VENDOR_ATMEL_FLASH_BUFFERED 0x02000003
-+#define FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED 0x00000003
-+#define FLASH_VENDOR_ST 0x03000001
-+#define FLASH_VENDOR_SAIFUN 0x01000003
-+#define FLASH_VENDOR_SST_SMALL 0x00000001
-+#define FLASH_VENDOR_SST_LARGE 0x02000001
- #define NVRAM_CFG2 0x00007018
- #define NVRAM_CFG3 0x0000701c
- #define NVRAM_SWARB 0x00007020
-@@ -1396,15 +1409,16 @@
- #define SWARB_REQ1 0x00002000
- #define SWARB_REQ2 0x00004000
- #define SWARB_REQ3 0x00008000
--#define NVRAM_BUFFERED_PAGE_SIZE 264
--#define NVRAM_BUFFERED_PAGE_POS 9
- #define NVRAM_ACCESS 0x00007024
- #define ACCESS_ENABLE 0x00000001
- #define ACCESS_WR_ENABLE 0x00000002
--/* 0x7024 --> 0x7400 unused */
-+#define NVRAM_WRITE1 0x00007028
-+/* 0x702c --> 0x7400 unused */
-
- /* 0x7400 --> 0x8000 unused */
-
-+#define TG3_EEPROM_MAGIC 0x669955aa
-+
- /* 32K Window into NIC internal memory */
- #define NIC_SRAM_WIN_BASE 0x00008000
-
-@@ -1438,6 +1452,9 @@
- #define NIC_SRAM_DATA_CFG_FIBER_WOL 0x00004000
- #define NIC_SRAM_DATA_CFG_NO_GPIO2 0x00100000
-
-+#define NIC_SRAM_DATA_VER 0x00000b5c
-+#define NIC_SRAM_DATA_VER_SHIFT 16
-+
- #define NIC_SRAM_DATA_PHY_ID 0x00000b74
- #define NIC_SRAM_DATA_PHY_ID1_MASK 0xffff0000
- #define NIC_SRAM_DATA_PHY_ID2_MASK 0x0000ffff
-@@ -2090,6 +2107,9 @@
- #define TG3_FLG2_PHY_JUST_INITTED 0x00001000
- #define TG3_FLG2_PHY_SERDES 0x00002000
- #define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000
-+#define TG3_FLG2_FLASH 0x00008000
-+#define TG3_FLG2_HW_TSO 0x00010000
-+#define TG3_FLG2_SERDES_PREEMPHASIS 0x00020000
-
- u32 split_mode_max_reqs;
- #define SPLIT_MODE_5704_MAX_REQ 3
-@@ -2164,6 +2184,34 @@
- struct tg3_hw_stats *hw_stats;
- dma_addr_t stats_mapping;
- struct tq_struct reset_task;
-+
-+ u32 nvram_size;
-+ u32 nvram_pagesize;
-+ u32 nvram_jedecnum;
-+
-+#define JEDEC_ATMEL 0x1f
-+#define JEDEC_ST 0x20
-+#define JEDEC_SAIFUN 0x4f
-+#define JEDEC_SST 0xbf
-+
-+#define ATMEL_AT24C64_CHIP_SIZE (64 * 1024)
-+#define ATMEL_AT24C64_PAGE_SIZE (32)
-+
-+#define ATMEL_AT24C512_CHIP_SIZE (512 * 1024)
-+#define ATMEL_AT24C512_PAGE_SIZE (128)
-+
-+#define ATMEL_AT45DB0X1B_PAGE_POS 9
-+#define ATMEL_AT45DB0X1B_PAGE_SIZE 264
-+
-+#define ATMEL_AT25F512_PAGE_SIZE 256
-+
-+#define ST_M45PEX0_PAGE_SIZE 256
-+
-+#define SAIFUN_SA25F0XX_PAGE_SIZE 256
-+
-+#define SST_25VF0X0_PAGE_SIZE 4098
++ return 0;
++}
+
++static int pccard_get_mem_map(unsigned int slot, struct pccard_mem_map *mem)
++{
++ vrc4171_socket_t *socket;
++ uint8_t addrwin;
++ u_long start, stop;
++ u_int offset;
++ u_char map;
+
- };
-
- #endif /* !(_T3_H) */
-diff -Nur linux-2.4.29/drivers/net/tulip/21142.c linux-mips/drivers/net/tulip/21142.c
---- linux-2.4.29/drivers/net/tulip/21142.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-mips/drivers/net/tulip/21142.c 2005-03-26 11:47:31.371502956 +0100
-@@ -14,8 +14,8 @@
-
- */
-
--#include "tulip.h"
- #include <linux/pci.h>
-+#include "tulip.h"
- #include <linux/delay.h>
-
-
-diff -Nur linux-2.4.29/drivers/net/tulip/eeprom.c linux-mips/drivers/net/tulip/eeprom.c
---- linux-2.4.29/drivers/net/tulip/eeprom.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-mips/drivers/net/tulip/eeprom.c 2005-03-26 11:47:31.372502792 +0100
-@@ -14,6 +14,7 @@
-
- */
-
-+#include <linux/pci.h>
- #include "tulip.h"
- #include <linux/init.h>
- #include <asm/unaligned.h>
-diff -Nur linux-2.4.29/drivers/net/tulip/interrupt.c linux-mips/drivers/net/tulip/interrupt.c
---- linux-2.4.29/drivers/net/tulip/interrupt.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-mips/drivers/net/tulip/interrupt.c 2005-03-26 11:47:31.372502792 +0100
-@@ -14,10 +14,10 @@
-
- */
-
-+#include <linux/pci.h>
- #include "tulip.h"
- #include <linux/config.h>
- #include <linux/etherdevice.h>
--#include <linux/pci.h>
-
-
- int tulip_rx_copybreak;
-diff -Nur linux-2.4.29/drivers/net/tulip/media.c linux-mips/drivers/net/tulip/media.c
---- linux-2.4.29/drivers/net/tulip/media.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-mips/drivers/net/tulip/media.c 2005-03-26 11:47:31.373502628 +0100
-@@ -18,6 +18,7 @@
- #include <linux/mii.h>
- #include <linux/init.h>
- #include <linux/delay.h>
-+#include <linux/pci.h>
- #include "tulip.h"
-
-
-diff -Nur linux-2.4.29/drivers/net/tulip/pnic2.c linux-mips/drivers/net/tulip/pnic2.c
---- linux-2.4.29/drivers/net/tulip/pnic2.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-mips/drivers/net/tulip/pnic2.c 2005-03-26 11:47:31.374502464 +0100
-@@ -76,8 +76,8 @@
-
-
-
--#include "tulip.h"
- #include <linux/pci.h>
-+#include "tulip.h"
- #include <linux/delay.h>
-
-
-diff -Nur linux-2.4.29/drivers/net/tulip/pnic.c linux-mips/drivers/net/tulip/pnic.c
---- linux-2.4.29/drivers/net/tulip/pnic.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-mips/drivers/net/tulip/pnic.c 2005-03-26 11:47:31.374502464 +0100
-@@ -15,6 +15,7 @@
- */
-
- #include <linux/kernel.h>
-+#include <linux/pci.h>
- #include "tulip.h"
-
-
-diff -Nur linux-2.4.29/drivers/net/tulip/timer.c linux-mips/drivers/net/tulip/timer.c
---- linux-2.4.29/drivers/net/tulip/timer.c 2004-08-08 01:26:05.000000000 +0200
-+++ linux-mips/drivers/net/tulip/timer.c 2005-03-26 11:47:31.375502300 +0100
-@@ -14,6 +14,7 @@
-
- */
-
-+#include <linux/pci.h>
- #include "tulip.h"
-
-
-diff -Nur linux-2.4.29/drivers/net/tulip/tulip_core.c linux-mips/drivers/net/tulip/tulip_core.c
---- linux-2.4.29/drivers/net/tulip/tulip_core.c 2004-08-08 01:26:05.000000000 +0200
-+++ linux-mips/drivers/net/tulip/tulip_core.c 2005-03-26 11:47:31.377501972 +0100
-@@ -20,8 +20,8 @@
-
- #include <linux/config.h>
- #include <linux/module.h>
--#include "tulip.h"
- #include <linux/pci.h>
-+#include "tulip.h"
- #include <linux/init.h>
- #include <linux/etherdevice.h>
- #include <linux/delay.h>
-diff -Nur linux-2.4.29/drivers/net/tulip/tulip.h linux-mips/drivers/net/tulip/tulip.h
---- linux-2.4.29/drivers/net/tulip/tulip.h 2002-11-29 00:53:14.000000000 +0100
-+++ linux-mips/drivers/net/tulip/tulip.h 2005-03-26 11:47:31.375502300 +0100
-@@ -146,6 +146,9 @@
- TxIntr = 0x01,
- };
-
-+/* bit mask for CSR5 TX/RX process state */
-+#define CSR5_TS 0x00700000
-+#define CSR5_RS 0x000e0000
-
- enum tulip_mode_bits {
- TxThreshold = (1 << 22),
-@@ -484,9 +487,19 @@
- u32 csr6 = inl(ioaddr + CSR6);
-
- if (csr6 & RxTx) {
-+ unsigned i=1300/10;
- outl(csr6 & ~RxTx, ioaddr + CSR6);
- barrier();
-- (void) inl(ioaddr + CSR6); /* mmio sync */
-+ /* wait until in-flight frame completes.
-+ * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
-+ * Typically expect this loop to end in < 50us on 100BT.
-+ */
-+ while (--i && (inl(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
-+ udelay(10);
++ if (slot >= CARD_MAX_SLOTS || mem == NULL || mem->map >= MEM_MAX_MAPS)
++ return -EINVAL;
+
-+ if (!i)
-+ printk (KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
-+ tp->pdev->slot_name);
- }
- }
-
-diff -Nur linux-2.4.29/drivers/pci/pci.c linux-mips/drivers/pci/pci.c
---- linux-2.4.29/drivers/pci/pci.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/pci/pci.c 2004-11-19 01:28:41.000000000 +0100
-@@ -1281,11 +1281,17 @@
- {
- unsigned int buses;
- unsigned short cr;
-+ unsigned short bctl;
- struct pci_bus *child;
- int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
-
- pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
- DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass);
-+ /* Disable MasterAbortMode during probing to avoid reporting
-+ of bus errors (in some architectures) */
-+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
-+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
-+ bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
- if ((buses & 0xffff00) && !pcibios_assign_all_busses()) {
- /*
- * Bus already configured by firmware, process it in the first
-@@ -1351,6 +1357,7 @@
- pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
- pci_write_config_word(dev, PCI_COMMAND, cr);
- }
-+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
- sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
- return max;
- }
-diff -Nur linux-2.4.29/drivers/pci/quirks.c linux-mips/drivers/pci/quirks.c
---- linux-2.4.29/drivers/pci/quirks.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/pci/quirks.c 2005-03-26 11:47:31.393499346 +0100
-@@ -368,9 +368,6 @@
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
-- *
-- * TODO: When we have device-specific interrupt routers,
-- * quirk_via_irqpic will go away from quirks.
- */
-
- /*
-@@ -393,22 +390,6 @@
- d->irq = irq;
- }
-
--static void __init quirk_via_irqpic(struct pci_dev *dev)
--{
-- u8 irq, new_irq = dev->irq & 0xf;
--
-- pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
--
-- if (new_irq != irq) {
-- printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
-- dev->slot_name, irq, new_irq);
--
-- udelay(15);
-- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
-- }
--}
--
--
- /*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
-@@ -639,12 +620,14 @@
- * VIA northbridges care about PCI_INTERRUPT_LINE
- */
-
--int interrupt_line_quirk;
-+int via_interrupt_line_quirk;
-
- static void __init quirk_via_bridge(struct pci_dev *pdev)
- {
-- if(pdev->devfn == 0)
-- interrupt_line_quirk = 1;
-+ if(pdev->devfn == 0) {
-+ printk(KERN_INFO "PCI: Via IRQ fixup\n");
-+ via_interrupt_line_quirk = 1;
-+ }
- }
-
- /*
-@@ -773,9 +756,6 @@
- #endif
- { PCI_FIXUP_HEADER, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi },
- { PCI_FIXUP_HEADER, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi },
-- { PCI_FIXUP_FINAL, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irqpic },
-- { PCI_FIXUP_FINAL, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irqpic },
-- { PCI_FIXUP_FINAL, PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_6, quirk_via_irqpic },
-
- { PCI_FIXUP_FINAL, PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic },
- { PCI_FIXUP_FINAL, PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering },
-diff -Nur linux-2.4.29/drivers/pcmcia/au1000_db1x00.c linux-mips/drivers/pcmcia/au1000_db1x00.c
---- linux-2.4.29/drivers/pcmcia/au1000_db1x00.c 2005-01-19 15:09:57.000000000 +0100
-+++ linux-mips/drivers/pcmcia/au1000_db1x00.c 2005-03-26 11:47:31.434492618 +0100
-@@ -1,6 +1,6 @@
- /*
- *
-- * Alchemy Semi Db1x00 boards specific pcmcia routines.
-+ * AMD Alchemy DUAL-SLOT Db1x00 boards' specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
-@@ -54,9 +54,20 @@
- #include <asm/au1000.h>
- #include <asm/au1000_pcmcia.h>
-
-+#if defined(CONFIG_MIPS_PB1200)
-+#include <asm/pb1200.h>
-+#elif defined(CONFIG_MIPS_DB1200)
-+#include <asm/db1200.h>
-+#else
- #include <asm/db1x00.h>
-+#endif
-
--static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-+#define PCMCIA_MAX_SOCK 1
-+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
++ socket = &vrc4171_sockets[slot];
++ map = mem->map;
+
-+/* VPP/VCC */
-+#define SET_VCC_VPP(VCC, VPP, SLOT)\
-+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
- static int db1x00_pcmcia_init(struct pcmcia_init *init)
- {
-@@ -76,7 +87,7 @@
- db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
- {
- u32 inserted;
-- unsigned char vs;
-+ u16 vs;
-
- if(sock > PCMCIA_MAX_SOCK) return -1;
-
-@@ -87,11 +98,11 @@
-
- if (sock == 0) {
- vs = bcsr->status & 0x3;
-- inserted = !(bcsr->status & (1<<4));
-+ inserted = BOARD_CARD_INSERTED(0);
- }
- else {
- vs = (bcsr->status & 0xC)>>2;
-- inserted = !(bcsr->status & (1<<5));
-+ inserted = BOARD_CARD_INSERTED(1);
- }
-
- DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n",
-@@ -144,16 +155,9 @@
- if(info->sock > PCMCIA_MAX_SOCK) return -1;
-
- if(info->sock == 0)
--#ifdef CONFIG_MIPS_DB1550
-- info->irq = AU1000_GPIO_3;
-+ info->irq = BOARD_PC0_INT;
- else
-- info->irq = AU1000_GPIO_5;
--#else
-- info->irq = AU1000_GPIO_2;
-- else
-- info->irq = AU1000_GPIO_5;
--#endif
--
-+ info->irq = BOARD_PC1_INT;
- return 0;
- }
-
-diff -Nur linux-2.4.29/drivers/pcmcia/cistpl.c linux-mips/drivers/pcmcia/cistpl.c
---- linux-2.4.29/drivers/pcmcia/cistpl.c 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/pcmcia/cistpl.c 2005-03-26 11:47:31.435492454 +0100
-@@ -140,7 +140,6 @@
- } else {
- u_int inc = 1;
- if (attr) { mem->flags |= MAP_ATTRIB; inc++; addr *= 2; }
-- sys += (addr & (s->cap.map_size-1));
- mem->card_start = addr & ~(s->cap.map_size-1);
- while (len) {
- set_cis_map(s, mem);
-diff -Nur linux-2.4.29/drivers/pcmcia/Config.in linux-mips/drivers/pcmcia/Config.in
---- linux-2.4.29/drivers/pcmcia/Config.in 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/pcmcia/Config.in 2004-02-22 06:21:34.000000000 +0100
-@@ -30,16 +30,14 @@
- dep_tristate ' M8xx support' CONFIG_PCMCIA_M8XX $CONFIG_PCMCIA
- fi
- if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
-- dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
-- if [ "$CONFIG_PCMCIA_AU1X00" != "n" ]; then
-- bool ' Pb1x00 board support' CONFIG_PCMCIA_PB1X00
-- bool ' Db1x00 board support' CONFIG_PCMCIA_DB1X00
-- bool ' XXS1500 board support' CONFIG_PCMCIA_XXS1500
-- fi
-+ dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
- fi
- if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
- dep_bool ' SiByte PCMCIA support' CONFIG_PCMCIA_SIBYTE $CONFIG_PCMCIA $CONFIG_BLK_DEV_IDE_SIBYTE
- fi
-+ if [ "$CONFIG_VRC4171" = "y" -o "$CONFIG_VRC4171" = "m" ]; then
-+ dep_tristate ' NEC VRC4171 Card Controllers support' CONFIG_PCMCIA_VRC4171 $CONFIG_PCMCIA
-+ fi
- if [ "$CONFIG_VRC4173" = "y" -o "$CONFIG_VRC4173" = "m" ]; then
- dep_tristate ' NEC VRC4173 CARDU support' CONFIG_PCMCIA_VRC4173 $CONFIG_PCMCIA
- fi
-diff -Nur linux-2.4.29/drivers/pcmcia/Makefile linux-mips/drivers/pcmcia/Makefile
---- linux-2.4.29/drivers/pcmcia/Makefile 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/pcmcia/Makefile 2005-03-26 11:47:31.433492782 +0100
-@@ -61,9 +61,18 @@
-
- obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
- au1000_ss-objs-y := au1000_generic.o
--au1000_ss-objs-$(CONFIG_PCMCIA_PB1X00) += au1000_pb1x00.o
--au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o
--au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1550) += au1000_pb1550.o
-+au1000_ss-objs-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
-+au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3) += au1000_hydrogen3.o
-+au1000_ss-objs-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
-
- obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
- obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
-@@ -89,6 +98,7 @@
- sa1100_cs-objs-$(CONFIG_SA1100_XP860) += sa1100_xp860.o sa1111_generic.o
- sa1100_cs-objs-$(CONFIG_SA1100_YOPY) += sa1100_yopy.o
-
-+obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
- obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
-
- include $(TOPDIR)/Rules.make
-diff -Nur linux-2.4.29/drivers/pcmcia/vrc4171_card.c linux-mips/drivers/pcmcia/vrc4171_card.c
---- linux-2.4.29/drivers/pcmcia/vrc4171_card.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/drivers/pcmcia/vrc4171_card.c 2004-01-19 16:54:58.000000000 +0100
-@@ -0,0 +1,886 @@
-+/*
-+ * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
-+ *
-+ * Copyright (C) 2003 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
++ mem->flags = 0;
++ mem->speed = 0;
+
-+#include <asm/io.h>
-+#include <asm/vr41xx/vrc4171.h>
++ addrwin = exca_read_byte(slot, I365_ADDRWIN);
++ if (addrwin & I365_ENA_MEM(map))
++ mem->flags |= MAP_ACTIVE;
+
-+#include <pcmcia/ss.h>
++ start = exca_read_word(slot, I365_MEM(map)+I365_W_START);
++ if (start & I365_MEM_16BIT)
++ mem->flags |= MAP_16BIT;
++ mem->sys_start = (start & 0x3fffUL) << 12;
+
-+#include "i82365.h"
++ stop = exca_read_word(slot, I365_MEM(map)+I365_W_STOP);
++ if (start & I365_MEM_WS0)
++ mem->speed += 1;
++ if (start & I365_MEM_WS1)
++ mem->speed += 2;
++ mem->sys_stop = ((stop & 0x3fffUL) << 12) + 0xfffUL;
+
-+MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
-+MODULE_AUTHOR("Yoichi Yuasa <yuasa@hh.iij4u.or.jp>");
-+MODULE_LICENSE("GPL");
++ offset = exca_read_word(slot, I365_MEM(map)+I365_W_OFF);
++ if (offset & I365_MEM_REG)
++ mem->flags |= MAP_ATTRIB;
++ if (offset & I365_MEM_WRPROT)
++ mem->flags |= MAP_WRPROT;
++ mem->card_start = (offset & 0x3fffUL) << 12;
+
-+#define CARD_MAX_SLOTS 2
-+#define CARD_SLOTA 0
-+#define CARD_SLOTB 1
-+#define CARD_SLOTB_OFFSET 0x40
++ mem->sys_start += CARD_MEM_START;
++ mem->sys_stop += CARD_MEM_START;
+
-+#define CARD_MEM_START 0x10000000
-+#define CARD_MEM_END 0x13ffffff
-+#define CARD_MAX_MEM_OFFSET 0x3ffffff
-+#define CARD_MAX_MEM_SPEED 1000
++ return 0;
++}
+
-+#define CARD_CONTROLLER_INDEX 0x03e0
-+#define CARD_CONTROLLER_DATA 0x03e1
-+#define CARD_CONTROLLER_SIZE 2
-+ /* Power register */
-+ #define VPP_GET_VCC 0x01
-+ #define POWER_ENABLE 0x10
-+ #define CARD_VOLTAGE_SENSE 0x1f
-+ #define VCC_3VORXV_CAPABLE 0x00
-+ #define VCC_XV_ONLY 0x01
-+ #define VCC_3V_CAPABLE 0x02
-+ #define VCC_5V_ONLY 0x03
-+ #define CARD_VOLTAGE_SELECT 0x2f
-+ #define VCC_3V 0x01
-+ #define VCC_5V 0x00
-+ #define VCC_XV 0x02
-+ #define VCC_STATUS_3V 0x02
-+ #define VCC_STATUS_5V 0x01
-+ #define VCC_STATUS_XV 0x03
-+ #define GLOBAL_CONTROL 0x1e
-+ #define EXWRBK 0x04
-+ #define IRQPM_EN 0x08
-+ #define CLRPMIRQ 0x10
++static int pccard_set_mem_map(unsigned int slot, struct pccard_mem_map *mem)
++{
++ vrc4171_socket_t *socket;
++ uint16_t start, stop, offset;
++ uint8_t addrwin;
++ u_char map;
+
-+#define IO_MAX_MAPS 2
-+#define MEM_MAX_MAPS 5
++ if (slot >= CARD_MAX_SLOTS ||
++ mem == NULL || mem->map >= MEM_MAX_MAPS ||
++ mem->sys_start < CARD_MEM_START || mem->sys_start > CARD_MEM_END ||
++ mem->sys_stop < CARD_MEM_START || mem->sys_stop > CARD_MEM_END ||
++ mem->sys_start > mem->sys_stop ||
++ mem->card_start > CARD_MAX_MEM_OFFSET ||
++ mem->speed > CARD_MAX_MEM_SPEED)
++ return -EINVAL;
+
-+enum {
-+ SLOTB_PROBE = 0,
-+ SLOTB_NOPROBE_IO,
-+ SLOTB_NOPROBE_MEM,
-+ SLOTB_NOPROBE_ALL
-+};
++ socket = &vrc4171_sockets[slot];
++ map = mem->map;
+
-+typedef struct vrc4171_socket {
-+ int noprobe;
-+ void (*handler)(void *, unsigned int);
-+ void *info;
-+ socket_cap_t cap;
-+ spinlock_t event_lock;
-+ uint16_t events;
-+ struct socket_info_t *pcmcia_socket;
-+ struct tq_struct tq_task;
-+ char name[24];
-+ int csc_irq;
-+ int io_irq;
-+} vrc4171_socket_t;
++ addrwin = exca_read_byte(slot, I365_ADDRWIN);
++ if (addrwin & I365_ENA_MEM(map)) {
++ addrwin &= ~I365_ENA_MEM(map);
++ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ }
+
-+static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
-+static int vrc4171_slotb = SLOTB_IS_NONE;
-+static unsigned int vrc4171_irq;
-+static uint16_t vrc4171_irq_mask = 0xdeb8;
++ start = (mem->sys_start >> 12) & 0x3fff;
++ if (mem->flags & MAP_16BIT)
++ start |= I365_MEM_16BIT;
++ exca_write_word(slot, I365_MEM(map)+I365_W_START, start);
+
-+extern struct socket_info_t *pcmcia_register_socket(int slot,
-+ struct pccard_operations *vtable,
-+ int use_bus_pm);
-+extern void pcmcia_unregister_socket(struct socket_info_t *s);
++ stop = (mem->sys_stop >> 12) & 0x3fff;
++ switch (mem->speed) {
++ case 0:
++ break;
++ case 1:
++ stop |= I365_MEM_WS0;
++ break;
++ case 2:
++ stop |= I365_MEM_WS1;
++ break;
++ default:
++ stop |= I365_MEM_WS0 | I365_MEM_WS1;
++ break;
++ }
++ exca_write_word(slot, I365_MEM(map)+I365_W_STOP, stop);
+
-+static inline uint8_t exca_read_byte(int slot, uint8_t index)
-+{
-+ if (slot == CARD_SLOTB)
-+ index += CARD_SLOTB_OFFSET;
++ offset = (mem->card_start >> 12) & 0x3fff;
++ if (mem->flags & MAP_ATTRIB)
++ offset |= I365_MEM_REG;
++ if (mem->flags & MAP_WRPROT)
++ offset |= I365_MEM_WRPROT;
++ exca_write_word(slot, I365_MEM(map)+I365_W_OFF, offset);
+
-+ outb(index, CARD_CONTROLLER_INDEX);
-+ return inb(CARD_CONTROLLER_DATA);
-+}
++ if (mem->flags & MAP_ACTIVE) {
++ addrwin |= I365_ENA_MEM(map);
++ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ }
+
-+static inline uint16_t exca_read_word(int slot, uint8_t index)
-+{
-+ uint16_t data;
++ return 0;
++}
+
-+ if (slot == CARD_SLOTB)
-+ index += CARD_SLOTB_OFFSET;
++static void pccard_proc_setup(unsigned int slot, struct proc_dir_entry *base)
++{
++}
+
-+ outb(index++, CARD_CONTROLLER_INDEX);
-+ data = inb(CARD_CONTROLLER_DATA);
++static struct pccard_operations vrc4171_pccard_operations = {
++ .init = pccard_init,
++ .suspend = pccard_suspend,
++ .register_callback = pccard_register_callback,
++ .inquire_socket = pccard_inquire_socket,
++ .get_status = pccard_get_status,
++ .get_socket = pccard_get_socket,
++ .set_socket = pccard_set_socket,
++ .get_io_map = pccard_get_io_map,
++ .set_io_map = pccard_set_io_map,
++ .get_mem_map = pccard_get_mem_map,
++ .set_mem_map = pccard_set_mem_map,
++ .proc_setup = pccard_proc_setup,
++};
+
-+ outb(index, CARD_CONTROLLER_INDEX);
-+ data |= ((uint16_t)inb(CARD_CONTROLLER_DATA)) << 8;
++static void pccard_bh(void *data)
++{
++ vrc4171_socket_t *socket = (vrc4171_socket_t *)data;
++ uint16_t events;
+
-+ return data;
++ spin_lock_irq(&socket->event_lock);
++ events = socket->events;
++ socket->events = 0;
++ spin_unlock_irq(&socket->event_lock);
++
++ if (socket->handler)
++ socket->handler(socket->info, events);
+}
+
-+static inline uint8_t exca_write_byte(int slot, uint8_t index, uint8_t data)
++static inline uint16_t get_events(int slot)
+{
-+ if (slot == CARD_SLOTB)
-+ index += CARD_SLOTB_OFFSET;
++ uint16_t events = 0;
++ uint8_t status, csc;
+
-+ outb(index, CARD_CONTROLLER_INDEX);
-+ outb(data, CARD_CONTROLLER_DATA);
++ status = exca_read_byte(slot, I365_STATUS);
++ csc = exca_read_byte(slot, I365_CSC);
+
-+ return data;
++ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
++ if ((csc & I365_CSC_STSCHG) && (status & I365_CS_STSCHG))
++ events |= SS_STSCHG;
++ } else {
++ if (csc & (I365_CSC_BVD1 | I365_CSC_BVD2)) {
++ if (!(status & I365_CS_BVD1))
++ events |= SS_BATDEAD;
++ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
++ events |= SS_BATWARN;
++ }
++ }
++ if ((csc & I365_CSC_READY) && (status & I365_CS_READY))
++ events |= SS_READY;
++ if ((csc & I365_CSC_DETECT) && ((status & I365_CS_DETECT) == I365_CS_DETECT))
++ events |= SS_DETECT;
++
++ return events;
+}
+
-+static inline uint16_t exca_write_word(int slot, uint8_t index, uint16_t data)
++static void pccard_status_change(int slot, vrc4171_socket_t *socket)
+{
-+ if (slot == CARD_SLOTB)
-+ index += CARD_SLOTB_OFFSET;
-+
-+ outb(index++, CARD_CONTROLLER_INDEX);
-+ outb(data, CARD_CONTROLLER_DATA);
++ uint16_t events;
+
-+ outb(index, CARD_CONTROLLER_INDEX);
-+ outb((uint8_t)(data >> 8), CARD_CONTROLLER_DATA);
++ socket->tq_task.routine = pccard_bh;
++ socket->tq_task.data = socket;
+
-+ return data;
++ events = get_events(slot);
++ if (events) {
++ spin_lock(&socket->event_lock);
++ socket->events |= events;
++ spin_unlock(&socket->event_lock);
++ schedule_task(&socket->tq_task);
++ }
+}
+
-+static inline int search_nonuse_irq(void)
++static void pccard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
-+ int i;
++ vrc4171_socket_t *socket;
++ uint16_t status;
+
-+ for (i = 0; i < 16; i++) {
-+ if (vrc4171_irq_mask & (1 << i)) {
-+ vrc4171_irq_mask &= ~(1 << i);
-+ return i;
++ status = vrc4171_get_irq_status();
++ if (status & IRQ_A) {
++ socket = &vrc4171_sockets[CARD_SLOTA];
++ if (socket->noprobe == SLOTB_PROBE) {
++ if (status & (1 << socket->csc_irq))
++ pccard_status_change(CARD_SLOTA, socket);
+ }
+ }
+
-+ return -1;
++ if (status & IRQ_B) {
++ socket = &vrc4171_sockets[CARD_SLOTB];
++ if (socket->noprobe == SLOTB_PROBE) {
++ if (status & (1 << socket->csc_irq))
++ pccard_status_change(CARD_SLOTB, socket);
++ }
++ }
+}
+
-+static int pccard_init(unsigned int slot)
++static inline void reserve_using_irq(int slot)
+{
-+ vrc4171_socket_t *socket = &vrc4171_sockets[slot];
-+
-+ socket->cap.features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS;
-+ socket->cap.irq_mask = 0;
-+ socket->cap.pci_irq = vrc4171_irq;
-+ socket->cap.map_size = 0x1000;
-+ socket->events = 0;
-+ spin_lock_init(socket->event_lock);
-+ socket->csc_irq = search_nonuse_irq();
-+ socket->io_irq = search_nonuse_irq();
++ unsigned int irq;
+
-+ return 0;
-+}
++ irq = exca_read_byte(slot, I365_INTCTL);
++ irq &= 0x0f;
++ vrc4171_irq_mask &= ~(1 << irq);
+
-+static int pccard_suspend(unsigned int slot)
-+{
-+ return -EINVAL;
++ irq = exca_read_byte(slot, I365_CSCINT);
++ irq = (irq & 0xf0) >> 4;
++ vrc4171_irq_mask &= ~(1 << irq);
+}
+
-+static int pccard_register_callback(unsigned int slot,
-+ void (*handler)(void *, unsigned int),
-+ void *info)
++static int __devinit vrc4171_add_socket(int slot)
+{
+ vrc4171_socket_t *socket;
+
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
++ if (socket->noprobe != SLOTB_PROBE) {
++ uint8_t addrwin;
+
-+ socket->handler = handler;
-+ socket->info = info;
++ switch (socket->noprobe) {
++ case SLOTB_NOPROBE_MEM:
++ addrwin = exca_read_byte(slot, I365_ADDRWIN);
++ addrwin &= 0x1f;
++ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ break;
++ case SLOTB_NOPROBE_IO:
++ addrwin = exca_read_byte(slot, I365_ADDRWIN);
++ addrwin &= 0xc0;
++ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ break;
++ default:
++ break;
++ }
+
-+ if (handler)
-+ MOD_INC_USE_COUNT;
-+ else
-+ MOD_DEC_USE_COUNT;
++ reserve_using_irq(slot);
++
++ return 0;
++ }
++
++ sprintf(socket->name, "NEC VRC4171 Card Slot %1c", 'A' + slot);
++
++ socket->pcmcia_socket = pcmcia_register_socket(slot, &vrc4171_pccard_operations, 1);
++ if (socket->pcmcia_socket == NULL)
++ return -ENOMEM;
++
++ exca_write_byte(slot, I365_ADDRWIN, 0);
++
++ exca_write_byte(slot, GLOBAL_CONTROL, 0);
+
+ return 0;
+}
+
-+static int pccard_inquire_socket(unsigned int slot, socket_cap_t *cap)
++static void vrc4171_remove_socket(int slot)
+{
+ vrc4171_socket_t *socket;
+
-+ if (slot >= CARD_MAX_SLOTS || cap == NULL)
-+ return -EINVAL;
++ if (slot >= CARD_MAX_SLOTS)
++ return;
+
+ socket = &vrc4171_sockets[slot];
+
-+ *cap = socket->cap;
-+
-+ return 0;
++ if (socket->pcmcia_socket != NULL) {
++ pcmcia_unregister_socket(socket->pcmcia_socket);
++ socket->pcmcia_socket = NULL;
++ }
+}
+
-+static int pccard_get_status(unsigned int slot, u_int *value)
++static int __devinit vrc4171_card_setup(char *options)
+{
-+ uint8_t status, sense;
-+ u_int val = 0;
++ if (options == NULL || *options == '\0')
++ return 0;
+
-+ if (slot >= CARD_MAX_SLOTS || value == NULL)
-+ return -EINVAL;
++ if (strncmp(options, "irq:", 4) == 0) {
++ int irq;
++ options += 4;
++ irq = simple_strtoul(options, &options, 0);
++ if (irq >= 0 && irq < NR_IRQS)
++ vrc4171_irq = irq;
+
-+ status = exca_read_byte(slot, I365_STATUS);
-+ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
-+ if (status & I365_CS_STSCHG)
-+ val |= SS_STSCHG;
-+ } else {
-+ if (!(status & I365_CS_BVD1))
-+ val |= SS_BATDEAD;
-+ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
-+ val |= SS_BATWARN;
++ if (*options != ',')
++ return 0;
++ options++;
+ }
-+ if ((status & I365_CS_DETECT) == I365_CS_DETECT)
-+ val |= SS_DETECT;
-+ if (status & I365_CS_WRPROT)
-+ val |= SS_WRPROT;
-+ if (status & I365_CS_READY)
-+ val |= SS_READY;
-+ if (status & I365_CS_POWERON)
-+ val |= SS_POWERON;
+
-+ sense = exca_read_byte(slot, CARD_VOLTAGE_SENSE);
-+ switch (sense) {
-+ case VCC_3VORXV_CAPABLE:
-+ val |= SS_3VCARD | SS_XVCARD;
-+ break;
-+ case VCC_XV_ONLY:
-+ val |= SS_XVCARD;
-+ break;
-+ case VCC_3V_CAPABLE:
-+ val |= SS_3VCARD;
-+ break;
-+ default:
-+ /* 5V only */
-+ break;
++ if (strncmp(options, "slota:", 6) == 0) {
++ options += 6;
++ if (*options != '\0') {
++ if (strncmp(options, "noprobe", 7) == 0) {
++ vrc4171_sockets[CARD_SLOTA].noprobe = 1;
++ options += 7;
++ }
++
++ if (*options != ',')
++ return 0;
++ options++;
++ } else
++ return 0;
++
+ }
+
-+ *value = val;
++ if (strncmp(options, "slotb:", 6) == 0) {
++ options += 6;
++ if (*options != '\0') {
++ if (strncmp(options, "pccard", 6) == 0) {
++ vrc4171_slotb = SLOTB_IS_PCCARD;
++ options += 6;
++ } else if (strncmp(options, "cf", 2) == 0) {
++ vrc4171_slotb = SLOTB_IS_CF;
++ options += 2;
++ } else if (strncmp(options, "flashrom", 8) == 0) {
++ vrc4171_slotb = SLOTB_IS_FLASHROM;
++ options += 8;
++ } else if (strncmp(options, "none", 4) == 0) {
++ vrc4171_slotb = SLOTB_IS_NONE;
++ options += 4;
++ }
+
-+ return 0;
-+}
++ if (*options != ',')
++ return 0;
++ options++;
+
-+static inline u_char get_Vcc_value(uint8_t voltage)
-+{
-+ switch (voltage) {
-+ case VCC_STATUS_3V:
-+ return 33;
-+ case VCC_STATUS_5V:
-+ return 50;
-+ default:
-+ break;
++ if ( strncmp(options, "memnoprobe", 10) == 0)
++ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_MEM;
++ if ( strncmp(options, "ionoprobe", 9) == 0)
++ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_IO;
++ if ( strncmp(options, "noprobe", 7) == 0)
++ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_ALL;
++ }
+ }
+
+ return 0;
+}
+
-+static inline u_char get_Vpp_value(uint8_t power, u_char Vcc)
-+{
-+ if ((power & 0x03) == 0x01 || (power & 0x03) == 0x02)
-+ return Vcc;
-+
-+ return 0;
-+}
++__setup("vrc4171_card=", vrc4171_card_setup);
+
-+static int pccard_get_socket(unsigned int slot, socket_state_t *state)
++static int __devinit vrc4171_card_init(void)
+{
-+ vrc4171_socket_t *socket;
-+ uint8_t power, voltage, control, cscint;
-+
-+ if (slot >= CARD_MAX_SLOTS || state == NULL)
-+ return -EINVAL;
++ int retval, slot;
+
-+ socket = &vrc4171_sockets[slot];
++ vrc4171_set_multifunction_pin(vrc4171_slotb);
+
-+ power = exca_read_byte(slot, I365_POWER);
-+ voltage = exca_read_byte(slot, CARD_VOLTAGE_SELECT);
++ if (request_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE,
++ "NEC VRC4171 Card Controller") == NULL)
++ return -EBUSY;
+
-+ state->Vcc = get_Vcc_value(voltage);
-+ state->Vpp = get_Vpp_value(power, state->Vcc);
++ for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
++ if (slot == CARD_SLOTB && vrc4171_slotb == SLOTB_IS_NONE)
++ break;
+
-+ state->flags = 0;
-+ if (power & POWER_ENABLE)
-+ state->flags |= SS_PWR_AUTO;
-+ if (power & I365_PWR_OUT)
-+ state->flags |= SS_OUTPUT_ENA;
++ retval = vrc4171_add_socket(slot);
++ if (retval != 0)
++ return retval;
++ }
+
-+ control = exca_read_byte(slot, I365_INTCTL);
-+ if (control & I365_PC_IOCARD)
-+ state->flags |= SS_IOCARD;
-+ if (!(control & I365_PC_RESET))
-+ state->flags |= SS_RESET;
++ retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ,
++ "NEC VRC4171 Card Controller", vrc4171_sockets);
++ if (retval < 0) {
++ for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
++ vrc4171_remove_socket(slot);
+
-+ cscint = exca_read_byte(slot, I365_CSCINT);
-+ state->csc_mask = 0;
-+ if (state->flags & SS_IOCARD) {
-+ if (cscint & I365_CSC_STSCHG)
-+ state->flags |= SS_STSCHG;
-+ } else {
-+ if (cscint & I365_CSC_BVD1)
-+ state->csc_mask |= SS_BATDEAD;
-+ if (cscint & I365_CSC_BVD2)
-+ state->csc_mask |= SS_BATWARN;
++ return retval;
+ }
-+ if (cscint & I365_CSC_READY)
-+ state->csc_mask |= SS_READY;
-+ if (cscint & I365_CSC_DETECT)
-+ state->csc_mask |= SS_DETECT;
++
++ printk(KERN_INFO "NEC VRC4171 Card Controller, connected to IRQ %d\n", vrc4171_irq);
+
+ return 0;
+}
+
-+static inline uint8_t set_Vcc_value(u_char Vcc)
++static void __devexit vrc4171_card_exit(void)
+{
-+ switch (Vcc) {
-+ case 33:
-+ return VCC_3V;
-+ case 50:
-+ return VCC_5V;
-+ }
-+
-+ /* Small voltage is chosen for safety. */
-+ return VCC_3V;
-+}
++ int slot;
+
-+static int pccard_set_socket(unsigned int slot, socket_state_t *state)
-+{
-+ vrc4171_socket_t *socket;
-+ uint8_t voltage, power, control, cscint;
++ for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
++ vrc4171_remove_socket(slot);
+
-+ if (slot >= CARD_MAX_SLOTS ||
-+ (state->Vpp != state->Vcc && state->Vpp != 0) ||
-+ (state->Vcc != 50 && state->Vcc != 33 && state->Vcc != 0))
-+ return -EINVAL;
++ release_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE);
++}
+
-+ socket = &vrc4171_sockets[slot];
++module_init(vrc4171_card_init);
++module_exit(vrc4171_card_exit);
+diff -Nur linux-2.4.29/drivers/scsi/NCR53C9x.h linux-mips/drivers/scsi/NCR53C9x.h
+--- linux-2.4.29/drivers/scsi/NCR53C9x.h 2004-02-18 14:36:31.000000000 +0100
++++ linux-mips/drivers/scsi/NCR53C9x.h 2003-12-15 19:19:51.000000000 +0100
+@@ -144,12 +144,7 @@
+
+ #ifndef MULTIPLE_PAD_SIZES
+
+-#ifdef CONFIG_CPU_HAS_WB
+-#include <asm/wbflush.h>
+-#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0)
+-#else
+-#define esp_write(__reg, __val) ((__reg) = (__val))
+-#endif
++#define esp_write(__reg, __val) do{(__reg) = (__val); iob();} while(0)
+ #define esp_read(__reg) (__reg)
+
+ struct ESP_regs {
+diff -Nur linux-2.4.29/drivers/sound/au1550_i2s.c linux-mips/drivers/sound/au1550_i2s.c
+--- linux-2.4.29/drivers/sound/au1550_i2s.c 2005-01-19 15:10:04.000000000 +0100
++++ linux-mips/drivers/sound/au1550_i2s.c 2005-02-08 08:07:50.000000000 +0100
+@@ -41,6 +41,7 @@
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
-+ spin_lock_irq(&socket->event_lock);
+ #include <linux/version.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+@@ -62,7 +63,45 @@
+ #include <asm/uaccess.h>
+ #include <asm/hardirq.h>
+ #include <asm/au1000.h>
+
-+ voltage = set_Vcc_value(state->Vcc);
-+ exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage);
++#if defined(CONFIG_SOC_AU1550)
+ #include <asm/pb1550.h>
++#endif
+
-+ power = POWER_ENABLE;
-+ if (state->Vpp == state->Vcc)
-+ power |= VPP_GET_VCC;
-+ if (state->flags & SS_OUTPUT_ENA)
-+ power |= I365_PWR_OUT;
-+ exca_write_byte(slot, I365_POWER, power);
++#if defined(CONFIG_MIPS_PB1200)
++#define WM8731
++#define WM_MODE_USB
++#include <asm/pb1200.h>
++#endif
+
-+ control = 0;
-+ if (state->io_irq != 0)
-+ control |= socket->io_irq;
-+ if (state->flags & SS_IOCARD)
-+ control |= I365_PC_IOCARD;
-+ if (state->flags & SS_RESET)
-+ control &= ~I365_PC_RESET;
-+ else
-+ control |= I365_PC_RESET;
-+ exca_write_byte(slot, I365_INTCTL, control);
++#if defined(CONFIG_MIPS_FICMMP)
++#define WM8721
++#define WM_MODE_NORMAL
++#include <asm/ficmmp.h>
++#endif
+
-+ cscint = 0;
-+ exca_write_byte(slot, I365_CSCINT, cscint);
-+ exca_read_byte(slot, I365_CSC); /* clear CardStatus change */
-+ if (state->csc_mask != 0)
-+ cscint |= socket->csc_irq << 8;
-+ if (state->flags & SS_IOCARD) {
-+ if (state->csc_mask & SS_STSCHG)
-+ cscint |= I365_CSC_STSCHG;
-+ } else {
-+ if (state->csc_mask & SS_BATDEAD)
-+ cscint |= I365_CSC_BVD1;
-+ if (state->csc_mask & SS_BATWARN)
-+ cscint |= I365_CSC_BVD2;
-+ }
-+ if (state->csc_mask & SS_READY)
-+ cscint |= I365_CSC_READY;
-+ if (state->csc_mask & SS_DETECT)
-+ cscint |= I365_CSC_DETECT;
-+ exca_write_byte(slot, I365_CSCINT, cscint);
+
-+ spin_unlock_irq(&socket->event_lock);
++#define WM_VOLUME_MIN 47
++#define WM_VOLUME_SCALE 80
+
-+ return 0;
-+}
++#if defined(WM8731)
++ /* OSS interface to the wm i2s.. */
++ #define CODEC_NAME "Wolfson WM8731 I2S"
++ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM | SOUND_MASK_LINE)
++ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK | SOUND_MASK_MIC)
++ #define WM_I2S_RECORD_MASK (SOUND_MASK_MIC | SOUND_MASK_LINE1 | SOUND_MASK_LINE)
++#elif defined(WM8721)
++ #define CODEC_NAME "Wolfson WM8721 I2S"
++ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM)
++ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK)
++ #define WM_I2S_RECORD_MASK (0)
++#endif
+
-+static int pccard_get_io_map(unsigned int slot, struct pccard_io_map *io)
-+{
-+ vrc4171_socket_t *socket;
-+ uint8_t ioctl, addrwin;
-+ u_char map;
+
-+ if (slot >= CARD_MAX_SLOTS || io == NULL ||
-+ io->map >= IO_MAX_MAPS)
-+ return -EINVAL;
++#define supported_mixer(FOO) ((FOO >= 0) && \
++ (FOO < SOUND_MIXER_NRDEVICES) && \
++ WM_I2S_SUPPORTED_MASK & (1<<FOO) )
+
-+ socket = &vrc4171_sockets[slot];
-+ map = io->map;
+ #include <asm/au1xxx_psc.h>
+ #include <asm/au1xxx_dbdma.h>
+
+@@ -98,13 +137,51 @@
+ * 0 = no VRA, 1 = use VRA if codec supports it
+ * The framework is here, but we currently force no VRA.
+ */
++#if defined(CONFIG_MIPS_PB1200) | defined(CONFIG_MIPS_PB1550)
+ static int vra = 0;
++#elif defined(CONFIG_MIPS_FICMMP)
++static int vra = 1;
++#endif
+
-+ io->start = exca_read_word(slot, I365_IO(map)+I365_W_START);
-+ io->stop = exca_read_word(slot, I365_IO(map)+I365_W_STOP);
++#define WM_REG_L_HEADPHONE_OUT 0x02
++#define WM_REG_R_HEADPHONE_OUT 0x03
++#define WM_REG_ANALOGUE_AUDIO_PATH_CTRL 0x04
++#define WM_REG_DIGITAL_AUDIO_PATH_CTRL 0x05
++#define WM_REG_POWER_DOWN_CTRL 0x06
++#define WM_REG_DIGITAL_AUDIO_IF 0x07
++#define WM_REG_SAMPLING_CONTROL 0x08
++#define WM_REG_ACTIVE_CTRL 0x09
++#define WM_REG_RESET 0x0F
++#define WM_SC_SR_96000 (0x7<<2)
++#define WM_SC_SR_88200 (0xF<<2)
++#define WM_SC_SR_48000 (0x0<<2)
++#define WM_SC_SR_44100 (0x8<<2)
++#define WM_SC_SR_32000 (0x6<<2)
++#define WM_SC_SR_8018 (0x9<<2)
++#define WM_SC_SR_8000 (0x1<<2)
++#define WM_SC_MODE_USB 1
++#define WM_SC_MODE_NORMAL 0
++#define WM_SC_BOSR_250FS (0<<1)
++#define WM_SC_BOSR_272FS (1<<1)
++#define WM_SC_BOSR_256FS (0<<1)
++#define WM_SC_BOSR_128FS (0<<1)
++#define WM_SC_BOSR_384FS (1<<1)
++#define WM_SC_BOSR_192FS (1<<1)
+
-+ ioctl = exca_read_byte(slot, I365_IOCTL);
-+ if (io->flags & I365_IOCTL_WAIT(map))
-+ io->speed = 1;
-+ else
-+ io->speed = 0;
++#define WS_64FS 31
++#define WS_96FS 47
++#define WS_128FS 63
++#define WS_192FS 95
+
-+ io->flags = 0;
-+ if (ioctl & I365_IOCTL_16BIT(map))
-+ io->flags |= MAP_16BIT;
-+ if (ioctl & I365_IOCTL_IOCS16(map))
-+ io->flags |= MAP_AUTOSZ;
-+ if (ioctl & I365_IOCTL_0WS(map))
-+ io->flags |= MAP_0WS;
++#define MIN_Q_COUNT 2
+
-+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+ if (addrwin & I365_ENA_IO(map))
-+ io->flags |= MAP_ACTIVE;
+ MODULE_PARM(vra, "i");
+ MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it");
+
+ static struct au1550_state {
+ /* soundcore stuff */
+ int dev_audio;
++ int dev_mixer;
+
+ spinlock_t lock;
+ struct semaphore open_sem;
+@@ -114,6 +191,11 @@
+ int no_vra;
+ volatile psc_i2s_t *psc_addr;
+
++ int level_line;
++ int level_mic;
++ int level_left;
++ int level_right;
++
+ struct dmabuf {
+ u32 dmanr;
+ unsigned sample_rate;
+@@ -195,60 +277,224 @@
+ }
+ }
+
+-/* Just a place holder. The Wolfson codec is a write only device,
+- * so we would have to keep a local copy of the data.
+- */
+-#if 0
+-static u8
+-rdcodec(u8 addr)
+-{
+- return 0 /* data */;
+-}
+-#endif
+-
+-
+ static void
+-wrcodec(u8 ctlreg, u8 val)
++wrcodec(u8 ctlreg, u16 val)
+ {
+ int rcnt;
+ extern int pb1550_wm_codec_write(u8 addr, u8 reg, u8 val);
+-
+ /* The codec is a write only device, with a 16-bit control/data
+ * word. Although it is written as two bytes on the I2C, the
+ * format is actually 7 bits of register and 9 bits of data.
+ * The ls bit of the first byte is the ms bit of the data.
+ */
+ rcnt = 0;
+- while ((pb1550_wm_codec_write((0x36 >> 1), ctlreg, val) != 1)
+- && (rcnt < 50)) {
++ while ((pb1550_wm_codec_write((0x36 >> 1),
++ (ctlreg << 1) | ((val >> 8) & 0x01),
++ (u8) (val & 0x00FF)) != 1) &&
++ (rcnt < 50)) {
+ rcnt++;
+-#if 0
+- printk("Codec write retry %02x %02x\n", ctlreg, val);
+-#endif
+ }
++
++ au1550_delay(10);
++}
+
++static int
++au1550_open_mixdev(struct inode *inode, struct file *file)
++{
++ file->private_data = &au1550_state;
+ return 0;
+}
+
-+static int pccard_set_io_map(unsigned int slot, struct pccard_io_map *io)
++static int
++au1550_release_mixdev(struct inode *inode, struct file *file)
+{
-+ vrc4171_socket_t *socket;
-+ uint8_t ioctl, addrwin;
-+ u_char map;
++ return 0;
++}
+
-+ if (slot >= CARD_MAX_SLOTS ||
-+ io == NULL || io->map >= IO_MAX_MAPS ||
-+ io->start > 0xffff || io->stop > 0xffff || io->start > io->stop)
-+ return -EINVAL;
++static int wm_i2s_read_mixer(struct au1550_state *s, int oss_channel)
++{
++ int ret = 0;
+
-+ socket = &vrc4171_sockets[slot];
-+ map = io->map;
++ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
++ /* nice stereo mixers .. */
+
-+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+ if (addrwin & I365_ENA_IO(map)) {
-+ addrwin &= ~I365_ENA_IO(map);
-+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ ret = s->level_left | (s->level_right << 8);
++ } else if (oss_channel == SOUND_MIXER_MIC) {
++ ret = 0;
++ /* TODO: Implement read mixer for input/output codecs */
+ }
+
-+ exca_write_word(slot, I365_IO(map)+I365_W_START, io->start);
-+ exca_write_word(slot, I365_IO(map)+I365_W_STOP, io->stop);
++ return ret;
+ }
+
++static void wm_i2s_write_mixer(struct au1550_state *s, int oss_channel, unsigned int left, unsigned int right)
++{
++ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
++ /* stereo mixers */
++ s->level_left = left;
++ s->level_right = right;
+
-+ ioctl = 0;
-+ if (io->speed > 0)
-+ ioctl |= I365_IOCTL_WAIT(map);
-+ if (io->flags & MAP_16BIT)
-+ ioctl |= I365_IOCTL_16BIT(map);
-+ if (io->flags & MAP_AUTOSZ)
-+ ioctl |= I365_IOCTL_IOCS16(map);
-+ if (io->flags & MAP_0WS)
-+ ioctl |= I365_IOCTL_0WS(map);
-+ exca_write_byte(slot, I365_IOCTL, ioctl);
++ right = (right * WM_VOLUME_SCALE) / 100;
++ left = (left * WM_VOLUME_SCALE) / 100;
++ if (right > WM_VOLUME_SCALE)
++ right = WM_VOLUME_SCALE;
++ if (left > WM_VOLUME_SCALE)
++ left = WM_VOLUME_SCALE;
+
-+ if (io->flags & MAP_ACTIVE) {
-+ addrwin |= I365_ENA_IO(map);
-+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+ }
++ right += WM_VOLUME_MIN;
++ left += WM_VOLUME_MIN;
+
-+ return 0;
++ wrcodec(WM_REG_L_HEADPHONE_OUT, left);
++ wrcodec(WM_REG_R_HEADPHONE_OUT, right);
++
++ }else if (oss_channel == SOUND_MIXER_MIC) {
++ /* TODO: implement write mixer for input/output codecs */
++ }
+}
+
-+static int pccard_get_mem_map(unsigned int slot, struct pccard_mem_map *mem)
++/* a thin wrapper for write_mixer */
++static void wm_i2s_set_mixer(struct au1550_state *s, unsigned int oss_mixer, unsigned int val )
+{
-+ vrc4171_socket_t *socket;
-+ uint8_t addrwin;
-+ u_long start, stop;
-+ u_int offset;
-+ u_char map;
-+
-+ if (slot >= CARD_MAX_SLOTS || mem == NULL || mem->map >= MEM_MAX_MAPS)
-+ return -EINVAL;
-+
-+ socket = &vrc4171_sockets[slot];
-+ map = mem->map;
-+
-+ mem->flags = 0;
-+ mem->speed = 0;
-+
-+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+ if (addrwin & I365_ENA_MEM(map))
-+ mem->flags |= MAP_ACTIVE;
-+
-+ start = exca_read_word(slot, I365_MEM(map)+I365_W_START);
-+ if (start & I365_MEM_16BIT)
-+ mem->flags |= MAP_16BIT;
-+ mem->sys_start = (start & 0x3fffUL) << 12;
-+
-+ stop = exca_read_word(slot, I365_MEM(map)+I365_W_STOP);
-+ if (start & I365_MEM_WS0)
-+ mem->speed += 1;
-+ if (start & I365_MEM_WS1)
-+ mem->speed += 2;
-+ mem->sys_stop = ((stop & 0x3fffUL) << 12) + 0xfffUL;
++ unsigned int left,right;
+
-+ offset = exca_read_word(slot, I365_MEM(map)+I365_W_OFF);
-+ if (offset & I365_MEM_REG)
-+ mem->flags |= MAP_ATTRIB;
-+ if (offset & I365_MEM_WRPROT)
-+ mem->flags |= MAP_WRPROT;
-+ mem->card_start = (offset & 0x3fffUL) << 12;
++ /* cleanse input a little */
++ right = ((val >> 8) & 0xff) ;
++ left = (val & 0xff) ;
+
-+ mem->sys_start += CARD_MEM_START;
-+ mem->sys_stop += CARD_MEM_START;
++ if (right > 100) right = 100;
++ if (left > 100) left = 100;
+
-+ return 0;
++ wm_i2s_write_mixer(s, oss_mixer, left, right);
+}
+
-+static int pccard_set_mem_map(unsigned int slot, struct pccard_mem_map *mem)
++static int
++au1550_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
-+ vrc4171_socket_t *socket;
-+ uint16_t start, stop, offset;
-+ uint8_t addrwin;
-+ u_char map;
-+
-+ if (slot >= CARD_MAX_SLOTS ||
-+ mem == NULL || mem->map >= MEM_MAX_MAPS ||
-+ mem->sys_start < CARD_MEM_START || mem->sys_start > CARD_MEM_END ||
-+ mem->sys_stop < CARD_MEM_START || mem->sys_stop > CARD_MEM_END ||
-+ mem->sys_start > mem->sys_stop ||
-+ mem->card_start > CARD_MAX_MEM_OFFSET ||
-+ mem->speed > CARD_MAX_MEM_SPEED)
-+ return -EINVAL;
++ struct au1550_state *s = (struct au1550_state *)file->private_data;
+
-+ socket = &vrc4171_sockets[slot];
-+ map = mem->map;
++ int i, val = 0;
+
-+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+ if (addrwin & I365_ENA_MEM(map)) {
-+ addrwin &= ~I365_ENA_MEM(map);
-+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
++ if (cmd == SOUND_MIXER_INFO) {
++ mixer_info info;
++ strncpy(info.id, CODEC_NAME, sizeof(info.id));
++ strncpy(info.name, CODEC_NAME, sizeof(info.name));
++ info.modify_counter = 0;
++ if (copy_to_user((void *)arg, &info, sizeof(info)))
++ return -EFAULT;
++ return 0;
+ }
-+
-+ start = (mem->sys_start >> 12) & 0x3fff;
-+ if (mem->flags & MAP_16BIT)
-+ start |= I365_MEM_16BIT;
-+ exca_write_word(slot, I365_MEM(map)+I365_W_START, start);
-+
-+ stop = (mem->sys_stop >> 12) & 0x3fff;
-+ switch (mem->speed) {
-+ case 0:
-+ break;
-+ case 1:
-+ stop |= I365_MEM_WS0;
-+ break;
-+ case 2:
-+ stop |= I365_MEM_WS1;
-+ break;
-+ default:
-+ stop |= I365_MEM_WS0 | I365_MEM_WS1;
-+ break;
++ if (cmd == SOUND_OLD_MIXER_INFO) {
++ _old_mixer_info info;
++ strncpy(info.id, CODEC_NAME, sizeof(info.id));
++ strncpy(info.name, CODEC_NAME, sizeof(info.name));
++ if (copy_to_user((void *)arg, &info, sizeof(info)))
++ return -EFAULT;
++ return 0;
+ }
-+ exca_write_word(slot, I365_MEM(map)+I365_W_STOP, stop);
+
-+ offset = (mem->card_start >> 12) & 0x3fff;
-+ if (mem->flags & MAP_ATTRIB)
-+ offset |= I365_MEM_REG;
-+ if (mem->flags & MAP_WRPROT)
-+ offset |= I365_MEM_WRPROT;
-+ exca_write_word(slot, I365_MEM(map)+I365_W_OFF, offset);
++ if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
++ return -EINVAL;
+
-+ if (mem->flags & MAP_ACTIVE) {
-+ addrwin |= I365_ENA_MEM(map);
-+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+ }
++ if (cmd == OSS_GETVERSION)
++ return put_user(SOUND_VERSION, (int *)arg);
+
-+ return 0;
-+}
++ if (_SIOC_DIR(cmd) == _SIOC_READ) {
++ switch (_IOC_NR(cmd)) {
++ case SOUND_MIXER_RECSRC: /* give them the current record src */
++ val = 0;
++ /*
++ if (!codec->recmask_io) {
++ val = 0;
++ } else {
++ val = codec->recmask_io(codec, 1, 0);
++ }*/
++ break;
+
-+static void pccard_proc_setup(unsigned int slot, struct proc_dir_entry *base)
-+{
-+}
++ case SOUND_MIXER_DEVMASK: /* give them the supported mixers */
++ val = WM_I2S_SUPPORTED_MASK;
++ break;
+
-+static struct pccard_operations vrc4171_pccard_operations = {
-+ .init = pccard_init,
-+ .suspend = pccard_suspend,
-+ .register_callback = pccard_register_callback,
-+ .inquire_socket = pccard_inquire_socket,
-+ .get_status = pccard_get_status,
-+ .get_socket = pccard_get_socket,
-+ .set_socket = pccard_set_socket,
-+ .get_io_map = pccard_get_io_map,
-+ .set_io_map = pccard_set_io_map,
-+ .get_mem_map = pccard_get_mem_map,
-+ .set_mem_map = pccard_set_mem_map,
-+ .proc_setup = pccard_proc_setup,
-+};
++ case SOUND_MIXER_RECMASK:
++ /* Arg contains a bit for each supported recording
++ * source */
++ val = WM_I2S_RECORD_MASK;
++ break;
+
-+static void pccard_bh(void *data)
-+{
-+ vrc4171_socket_t *socket = (vrc4171_socket_t *)data;
-+ uint16_t events;
++ case SOUND_MIXER_STEREODEVS:
++ /* Mixer channels supporting stereo */
++ val = WM_I2S_STEREO_MASK;
++ break;
+
-+ spin_lock_irq(&socket->event_lock);
-+ events = socket->events;
-+ socket->events = 0;
-+ spin_unlock_irq(&socket->event_lock);
-+
-+ if (socket->handler)
-+ socket->handler(socket->info, events);
-+}
++ case SOUND_MIXER_CAPS:
++ val = SOUND_CAP_EXCL_INPUT;
++ break;
+
-+static inline uint16_t get_events(int slot)
-+{
-+ uint16_t events = 0;
-+ uint8_t status, csc;
++ default: /* read a specific mixer */
++ i = _IOC_NR(cmd);
+
-+ status = exca_read_byte(slot, I365_STATUS);
-+ csc = exca_read_byte(slot, I365_CSC);
++ if (!supported_mixer(i))
++ return -EINVAL;
+
-+ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
-+ if ((csc & I365_CSC_STSCHG) && (status & I365_CS_STSCHG))
-+ events |= SS_STSCHG;
-+ } else {
-+ if (csc & (I365_CSC_BVD1 | I365_CSC_BVD2)) {
-+ if (!(status & I365_CS_BVD1))
-+ events |= SS_BATDEAD;
-+ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
-+ events |= SS_BATWARN;
++ val = wm_i2s_read_mixer(s, i);
++ break;
+ }
++ return put_user(val, (int *)arg);
+ }
-+ if ((csc & I365_CSC_READY) && (status & I365_CS_READY))
-+ events |= SS_READY;
-+ if ((csc & I365_CSC_DETECT) && ((status & I365_CS_DETECT) == I365_CS_DETECT))
-+ events |= SS_DETECT;
+
-+ return events;
-+}
++ if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) {
++ if (get_user(val, (int *)arg))
++ return -EFAULT;
+
-+static void pccard_status_change(int slot, vrc4171_socket_t *socket)
-+{
-+ uint16_t events;
++ switch (_IOC_NR(cmd)) {
++ case SOUND_MIXER_RECSRC:
++ /* Arg contains a bit for each recording source */
++ if (!WM_I2S_RECORD_MASK)
++ return -EINVAL;
++ if (!val)
++ return 0;
++ if (!(val &= WM_I2S_RECORD_MASK))
++ return -EINVAL;
+
-+ socket->tq_task.routine = pccard_bh;
-+ socket->tq_task.data = socket;
++ return 0;
++ default: /* write a specific mixer */
++ i = _IOC_NR(cmd);
+
-+ events = get_events(slot);
-+ if (events) {
-+ spin_lock(&socket->event_lock);
-+ socket->events |= events;
-+ spin_unlock(&socket->event_lock);
-+ schedule_task(&socket->tq_task);
++ if (!supported_mixer(i))
++ return -EINVAL;
++
++ wm_i2s_set_mixer(s, i, val);
++
++ return 0;
+ }
+}
++ return -EINVAL;
++}
+
-+static void pccard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ vrc4171_socket_t *socket;
-+ uint16_t status;
-+
-+ status = vrc4171_get_irq_status();
-+ if (status & IRQ_A) {
-+ socket = &vrc4171_sockets[CARD_SLOTA];
-+ if (socket->noprobe == SLOTB_PROBE) {
-+ if (status & (1 << socket->csc_irq))
-+ pccard_status_change(CARD_SLOTA, socket);
-+ }
-+ }
-+
-+ if (status & IRQ_B) {
-+ socket = &vrc4171_sockets[CARD_SLOTB];
-+ if (socket->noprobe == SLOTB_PROBE) {
-+ if (status & (1 << socket->csc_irq))
-+ pccard_status_change(CARD_SLOTB, socket);
-+ }
-+ }
-+}
-+
-+static inline void reserve_using_irq(int slot)
-+{
-+ unsigned int irq;
-+
-+ irq = exca_read_byte(slot, I365_INTCTL);
-+ irq &= 0x0f;
-+ vrc4171_irq_mask &= ~(1 << irq);
-+
-+ irq = exca_read_byte(slot, I365_CSCINT);
-+ irq = (irq & 0xf0) >> 4;
-+ vrc4171_irq_mask &= ~(1 << irq);
-+}
-+
-+static int __devinit vrc4171_add_socket(int slot)
-+{
-+ vrc4171_socket_t *socket;
-+
-+ if (slot >= CARD_MAX_SLOTS)
-+ return -EINVAL;
-+
-+ socket = &vrc4171_sockets[slot];
-+ if (socket->noprobe != SLOTB_PROBE) {
-+ uint8_t addrwin;
-+
-+ switch (socket->noprobe) {
-+ case SLOTB_NOPROBE_MEM:
-+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+ addrwin &= 0x1f;
-+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+ break;
-+ case SLOTB_NOPROBE_IO:
-+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
-+ addrwin &= 0xc0;
-+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ reserve_using_irq(slot);
-+
-+ return 0;
-+ }
-+
-+ sprintf(socket->name, "NEC VRC4171 Card Slot %1c", 'A' + slot);
-+
-+ socket->pcmcia_socket = pcmcia_register_socket(slot, &vrc4171_pccard_operations, 1);
-+ if (socket->pcmcia_socket == NULL)
-+ return -ENOMEM;
-+
-+ exca_write_byte(slot, I365_ADDRWIN, 0);
-+
-+ exca_write_byte(slot, GLOBAL_CONTROL, 0);
-+
-+ return 0;
-+}
-+
-+static void vrc4171_remove_socket(int slot)
-+{
-+ vrc4171_socket_t *socket;
-+
-+ if (slot >= CARD_MAX_SLOTS)
-+ return;
-+
-+ socket = &vrc4171_sockets[slot];
-+
-+ if (socket->pcmcia_socket != NULL) {
-+ pcmcia_unregister_socket(socket->pcmcia_socket);
-+ socket->pcmcia_socket = NULL;
-+ }
-+}
-+
-+static int __devinit vrc4171_card_setup(char *options)
-+{
-+ if (options == NULL || *options == '\0')
-+ return 0;
-+
-+ if (strncmp(options, "irq:", 4) == 0) {
-+ int irq;
-+ options += 4;
-+ irq = simple_strtoul(options, &options, 0);
-+ if (irq >= 0 && irq < NR_IRQS)
-+ vrc4171_irq = irq;
-+
-+ if (*options != ',')
-+ return 0;
-+ options++;
-+ }
-+
-+ if (strncmp(options, "slota:", 6) == 0) {
-+ options += 6;
-+ if (*options != '\0') {
-+ if (strncmp(options, "noprobe", 7) == 0) {
-+ vrc4171_sockets[CARD_SLOTA].noprobe = 1;
-+ options += 7;
-+ }
-+
-+ if (*options != ',')
-+ return 0;
-+ options++;
-+ } else
-+ return 0;
-+
-+ }
-+
-+ if (strncmp(options, "slotb:", 6) == 0) {
-+ options += 6;
-+ if (*options != '\0') {
-+ if (strncmp(options, "pccard", 6) == 0) {
-+ vrc4171_slotb = SLOTB_IS_PCCARD;
-+ options += 6;
-+ } else if (strncmp(options, "cf", 2) == 0) {
-+ vrc4171_slotb = SLOTB_IS_CF;
-+ options += 2;
-+ } else if (strncmp(options, "flashrom", 8) == 0) {
-+ vrc4171_slotb = SLOTB_IS_FLASHROM;
-+ options += 8;
-+ } else if (strncmp(options, "none", 4) == 0) {
-+ vrc4171_slotb = SLOTB_IS_NONE;
-+ options += 4;
-+ }
-+
-+ if (*options != ',')
-+ return 0;
-+ options++;
-+
-+ if ( strncmp(options, "memnoprobe", 10) == 0)
-+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_MEM;
-+ if ( strncmp(options, "ionoprobe", 9) == 0)
-+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_IO;
-+ if ( strncmp(options, "noprobe", 7) == 0)
-+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_ALL;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+__setup("vrc4171_card=", vrc4171_card_setup);
-+
-+static int __devinit vrc4171_card_init(void)
++static loff_t
++au1550_llseek(struct file *file, loff_t offset, int origin)
+{
-+ int retval, slot;
-+
-+ vrc4171_set_multifunction_pin(vrc4171_slotb);
-+
-+ if (request_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE,
-+ "NEC VRC4171 Card Controller") == NULL)
-+ return -EBUSY;
-+
-+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
-+ if (slot == CARD_SLOTB && vrc4171_slotb == SLOTB_IS_NONE)
-+ break;
-+
-+ retval = vrc4171_add_socket(slot);
-+ if (retval != 0)
-+ return retval;
-+ }
-+
-+ retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ,
-+ "NEC VRC4171 Card Controller", vrc4171_sockets);
-+ if (retval < 0) {
-+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
-+ vrc4171_remove_socket(slot);
-+
-+ return retval;
-+ }
-+
-+ printk(KERN_INFO "NEC VRC4171 Card Controller, connected to IRQ %d\n", vrc4171_irq);
-+
-+ return 0;
++ return -ESPIPE;
+}
+
-+static void __devexit vrc4171_card_exit(void)
-+{
-+ int slot;
-+
-+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
-+ vrc4171_remove_socket(slot);
-+
-+ release_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE);
-+}
++static /*const */ struct file_operations au1550_mixer_fops = {
++ owner:THIS_MODULE,
++ llseek:au1550_llseek,
++ ioctl:au1550_ioctl_mixdev,
++ open:au1550_open_mixdev,
++ release:au1550_release_mixdev,
++};
+
-+module_init(vrc4171_card_init);
-+module_exit(vrc4171_card_exit);
-diff -Nur linux-2.4.29/drivers/sbus/audio/audio.c linux-mips/drivers/sbus/audio/audio.c
---- linux-2.4.29/drivers/sbus/audio/audio.c 2001-10-11 08:42:46.000000000 +0200
-+++ linux-mips/drivers/sbus/audio/audio.c 2005-03-26 11:47:32.089385135 +0100
-@@ -65,6 +65,14 @@
- #define tprintk(x)
- #endif
-
-+static int audio_input_buffers = 8;
-+MODULE_PARM(audio_input_buffers, "i");
-+MODULE_PARM_DESC(audio_input_buffers,"Number of input 8KB buffers.");
-+
-+static int audio_output_buffers = 8;
-+MODULE_PARM(audio_output_buffers, "i");
-+MODULE_PARM_DESC(audio_output_buffers,"Number of output 8KB buffer.");
-+
- static short lis_get_elist_ent( strevent_t *list, pid_t pid );
- static int lis_add_to_elist( strevent_t **list, pid_t pid, short events );
- static int lis_del_from_elist( strevent_t **list, pid_t pid, short events );
-@@ -438,7 +446,7 @@
- m = drv->ops->get_input_balance(drv);
- i = OSS_TO_GAIN(k);
- j = OSS_TO_BAL(k);
-- oprintk((" for stereo to do %d (bal %d):", i, j));
-+ oprintk((" for stereo to do %ld (bal %ld):", i, j));
- if (drv->ops->set_input_volume)
- drv->ops->set_input_volume(drv, i);
- if (drv->ops->set_input_balance)
-@@ -488,7 +496,7 @@
- oprintk((" started as (0x%x)\n", BAL_TO_OSS(l,m)));
- i = OSS_TO_GAIN(k);
- j = OSS_TO_BAL(k);
-- oprintk((" for stereo to %d (bal %d)\n", i, j));
-+ oprintk((" for stereo to %ld (bal %ld)\n", i, j));
- if (drv->ops->set_output_volume)
- drv->ops->set_output_volume(drv, i);
- if (drv->ops->set_output_balance)
-@@ -565,7 +573,7 @@
- if (k & SOUND_MASK_CD) j = AUDIO_CD;
- if (k & SOUND_MASK_LINE) j = AUDIO_LINE_IN;
- if (k & SOUND_MASK_MIC) j = AUDIO_MICROPHONE;
-- oprintk(("setting inport to %d\n", j));
-+ oprintk(("setting inport to %ld\n", j));
- i = drv->ops->set_input_port(drv, j);
-
- return put_user(i, (int *)arg);
-@@ -798,7 +806,7 @@
- retval = -EINVAL;
- break;
- }
-- get_user(i, (int *)arg)
-+ get_user(i, (int *)arg);
- tprintk(("setting speed to %d\n", i));
- drv->ops->set_input_rate(drv, i);
- drv->ops->set_output_rate(drv, i);
-@@ -1955,8 +1963,6 @@
- * Input buffers, on the other hand, always fill completely,
- * so we don't need input counts - each contains input_buffer_size
- * bytes of audio data.
-- *
-- * TODO: Make number of input/output buffers tunable parameters
- */
-
- init_waitqueue_head(&drv->open_wait);
-@@ -1964,7 +1970,7 @@
- init_waitqueue_head(&drv->output_drain_wait);
- init_waitqueue_head(&drv->input_read_wait);
-
-- drv->num_output_buffers = 8;
-+ drv->num_output_buffers = audio_output_buffers;
- drv->output_buffer_size = (4096 * 2);
- drv->playing_count = 0;
- drv->output_offset = 0;
-@@ -1997,7 +2003,7 @@
- }
-
- /* Setup the circular queue of input buffers. */
-- drv->num_input_buffers = 8;
-+ drv->num_input_buffers = audio_input_buffers;
- drv->input_buffer_size = (4096 * 2);
- drv->recording_count = 0;
- drv->input_front = 0;
-diff -Nur linux-2.4.29/drivers/sbus/audio/dbri.c linux-mips/drivers/sbus/audio/dbri.c
---- linux-2.4.29/drivers/sbus/audio/dbri.c 2002-11-29 00:53:14.000000000 +0100
-+++ linux-mips/drivers/sbus/audio/dbri.c 2005-03-26 11:47:32.378337711 +0100
-@@ -51,6 +51,7 @@
- #include <linux/slab.h>
- #include <linux/version.h>
- #include <linux/delay.h>
-+#include <linux/soundcard.h>
- #include <asm/openprom.h>
- #include <asm/oplib.h>
- #include <asm/system.h>
-@@ -161,7 +162,7 @@
-
- static void dbri_process_interrupt_buffer(struct dbri *);
-
--static void dbri_cmdsend(struct dbri *dbri, volatile s32 *cmd)
-+static void dbri_cmdsend(struct dbri *dbri, volatile s32 *cmd, int pause)
+ void
+-codec_init(void)
++codec_init(struct au1550_state *s)
{
- int MAXLOOPS = 1000000;
- int maxloops = MAXLOOPS;
-@@ -181,25 +182,30 @@
- } else if ((cmd - &dbri->dma->cmd[0]) >= DBRI_NO_CMDS-1) {
- printk("DBRI: Command buffer overflow! (bug in driver)\n");
- } else {
-- *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
-+ if (pause)
-+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- *(cmd++) = DBRI_CMD(D_WAIT, 1, 0);
- dbri->wait_seen = 0;
- sbus_writel(dbri->dma_dvma, dbri->regs + REG8);
-- while ((--maxloops) > 0 &&
-- (sbus_readl(dbri->regs + REG0) & D_P))
-- barrier();
-- if (maxloops == 0) {
-- printk("DBRI: Chip never completed command buffer\n");
-- } else {
-- while ((--maxloops) > 0 && (! dbri->wait_seen))
-- dbri_process_interrupt_buffer(dbri);
-+ if (pause) {
-+ while ((--maxloops) > 0 &&
-+ (sbus_readl(dbri->regs + REG0) & D_P))
-+ barrier();
- if (maxloops == 0) {
-- printk("DBRI: Chip never acked WAIT\n");
-+ printk("DBRI: Chip never completed command buffer\n");
- } else {
-- dprintk(D_INT, ("DBRI: Chip completed command "
-- "buffer (%d)\n",
-- MAXLOOPS - maxloops));
-+ while ((--maxloops) > 0 && (! dbri->wait_seen))
-+ dbri_process_interrupt_buffer(dbri);
-+ if (maxloops == 0) {
-+ printk("DBRI: Chip never acked WAIT\n");
-+ } else {
-+ dprintk(D_INT, ("DBRI: Chip completed command "
-+ "buffer (%d)\n",
-+ MAXLOOPS - maxloops));
-+ }
- }
-+ } else {
-+ dprintk(D_INT, ("DBRI: NO PAUSE\n"));
- }
- }
-
-@@ -257,7 +263,10 @@
- /* We should query the openprom to see what burst sizes this
- * SBus supports. For now, just disable all SBus bursts */
- tmp = sbus_readl(dbri->regs + REG0);
-- tmp &= ~(D_G | D_S | D_E);
-+ /* A brute approach - DBRI falls back to working burst size by itself
-+ * On SS20 D_S does not work, so do not try so high. */
-+ tmp |= D_G | D_E;
-+ tmp &= ~D_S;
- sbus_writel(tmp, dbri->regs + REG0);
-
- /*
-@@ -268,7 +277,7 @@
- *(cmd++) = DBRI_CMD(D_IIQ, 0, 0);
- *(cmd++) = dma_addr;
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
-
-@@ -455,7 +464,7 @@
- dbri->pipes[pipe].sdp
- | D_SDP_P | D_SDP_C | D_SDP_2SAME);
- *(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, td);
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
- if (code == D_INTR_FXDT) {
-@@ -579,7 +588,7 @@
- cmd = dbri_cmdlock(dbri);
- *(cmd++) = DBRI_CMD(D_SDP, 0, sdp | D_SDP_C | D_SDP_P);
- *(cmd++) = 0;
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
-
- desc = dbri->pipes[pipe].desc;
- while (desc != -1) {
-@@ -722,7 +731,7 @@
- *(cmd++) = D_TS_LEN(length) | D_TS_CYCLE(cycle) | D_TS_NEXT(nextpipe);
- }
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
- /* I don't use this function, so it's basically untested. */
-@@ -752,7 +761,7 @@
- *(cmd++) = D_TS_NEXT(nextpipe);
- }
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
- /* xmit_fixed() / recv_fixed()
-@@ -803,7 +812,7 @@
- *(cmd++) = DBRI_CMD(D_SSP, 0, pipe);
- *(cmd++) = data;
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
- static void recv_fixed(struct dbri *dbri, int pipe, volatile __u32 *ptr)
-@@ -884,7 +893,9 @@
- }
-
- if (len > ((1 << 13) - 1)) {
-- mylen = (1 << 13) - 1;
-+ /* One should not leave a buffer shorter than */
-+ /* a single sample. Otherwise bad things happens.*/
-+ mylen = (1 << 13) - 4;
- } else {
- mylen = len;
- }
-@@ -954,7 +965,7 @@
-
- cmd = dbri_cmdlock(dbri);
- *(cmd++) = DBRI_CMD(D_CDP, 0, pipe);
-- dbri_cmdsend(dbri,cmd);
-+ dbri_cmdsend(dbri,cmd, 0);
- } else {
- /* Pipe isn't active - issue an SDP command to start
- * our chain of TDs running.
-@@ -965,7 +976,7 @@
- dbri->pipes[pipe].sdp
- | D_SDP_P | D_SDP_EVERY | D_SDP_C);
- *(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_td);
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 0);
- }
-
- restore_flags(flags);
-@@ -1083,7 +1094,7 @@
- *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[pipe].sdp | D_SDP_P | D_SDP_C);
- *(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_rd);
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
-
-@@ -1191,7 +1202,7 @@
- *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- *(cmd++) = DBRI_CMD(D_CDM, 0, D_CDM_XCE|D_CDM_XEN|D_CDM_REN);
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
- }
-
- /*
-@@ -1538,7 +1549,6 @@
- xmit_on_pipe(dbri, 4, buffer, count,
- &dbri_audio_output_callback, drv);
-
--#if 0
- /* Notify midlevel that we're a DMA-capable driver that
- * can accept another buffer immediately. We should probably
- * check that we've got enough resources (i.e, descriptors)
-@@ -1551,9 +1561,14 @@
- * DBRI with a chain of buffers, but the midlevel code is
- * so tricky that I really don't want to deal with it.
- */
-+ /*
-+ * This must be enabled otherwise the output is noisy
-+ * as return to user space is done when all buffers
-+ * are already played, so user space player has no time
-+ * to prepare next ones without a period of silence. - Krzysztof Helt
-+ */
-
- sparcaudio_output_done(drv, 2);
--#endif
- }
-
- static void dbri_stop_output(struct sparcaudio_driver *drv)
-@@ -1842,6 +1857,12 @@
- return dbri_get_output_rate(drv);
- }
-
-+static int dbri_get_formats(struct sparcaudio_driver *drv)
-+{
-+/* 8-bit format is not working */
-+ return (AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE);
-+}
-+
- /******************* sparcaudio midlevel - ports ***********************/
-
- static int dbri_set_output_port(struct sparcaudio_driver *drv, int port)
-@@ -1983,6 +2004,19 @@
- dbri_get_input_ports,
- dbri_set_output_muted,
- dbri_get_output_muted,
-+ NULL, /* dbri_set_output_pause, */
-+ NULL, /* dbri_get_output_pause, */
-+ NULL, /* dbri_set_input_pause, */
-+ NULL, /* dbri_get_input_pause, */
-+ NULL, /* dbri_set_output_samples, */
-+ NULL, /* dbri_get_output_samples, */
-+ NULL, /* dbri_set_input_samples, */
-+ NULL, /* dbri_get_input_samples, */
-+ NULL, /* dbri_set_output_error, */
-+ NULL, /* dbri_get_output_error, */
-+ NULL, /* dbri_set_input_error, */
-+ NULL, /* dbri_get_input_error, */
-+ dbri_get_formats
- };
-
-
-@@ -2093,7 +2127,7 @@
- #endif
- *(cmd++) = DBRI_CMD(D_TE, 0, val);
-
-- dbri_cmdsend(dbri, cmd);
-+ dbri_cmdsend(dbri, cmd, 1);
-
- /* Activate the interface */
- tmp = sbus_readl(dbri->regs + REG0);
-diff -Nur linux-2.4.29/drivers/scsi/ahci.c linux-mips/drivers/scsi/ahci.c
---- linux-2.4.29/drivers/scsi/ahci.c 2005-01-19 15:10:01.000000000 +0100
-+++ linux-mips/drivers/scsi/ahci.c 2005-03-26 11:47:32.448326225 +0100
-@@ -40,8 +40,6 @@
- #define DRV_NAME "ahci"
- #define DRV_VERSION "1.00"
-
--#define msleep libata_msleep /* 2.4-specific */
--
- enum {
- AHCI_PCI_BAR = 5,
- AHCI_MAX_SG = 168, /* hardware max is 64K */
-@@ -180,6 +178,7 @@
- static void ahci_host_stop(struct ata_host_set *host_set);
- static void ahci_qc_prep(struct ata_queued_cmd *qc);
- static u8 ahci_check_status(struct ata_port *ap);
-+static u8 ahci_check_err(struct ata_port *ap);
- static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
-
- static Scsi_Host_Template ahci_sht = {
-@@ -206,6 +205,8 @@
- .port_disable = ata_port_disable,
-
- .check_status = ahci_check_status,
-+ .check_altstatus = ahci_check_status,
-+ .check_err = ahci_check_err,
- .dev_select = ata_noop_dev_select,
-
- .phy_reset = ahci_phy_reset,
-@@ -248,6 +249,12 @@
- board_ahci }, /* ICH7 */
- { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_ahci }, /* ICH7M */
-+ { PCI_VENDOR_ID_INTEL, 0x27c2, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_ahci }, /* ICH7R */
-+ { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_ahci }, /* ICH7R */
-+ { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_ahci }, /* ULi M5288 */
- { } /* terminate list */
- };
-
-@@ -448,6 +455,13 @@
- return readl(mmio + PORT_TFDATA) & 0xFF;
- }
-
-+static u8 ahci_check_err(struct ata_port *ap)
-+{
-+ void *mmio = (void *) ap->ioaddr.cmd_addr;
-+
-+ return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
-+}
-+
- static void ahci_fill_sg(struct ata_queued_cmd *qc)
- {
- struct ahci_port_priv *pp = qc->ap->private_data;
-@@ -515,15 +529,6 @@
- ahci_fill_sg(qc);
- }
-
--static inline void ahci_dma_complete (struct ata_port *ap,
-- struct ata_queued_cmd *qc,
-- int have_err)
--{
-- /* get drive status; clear intr; complete txn */
-- ata_qc_complete(ata_qc_from_tag(ap, ap->active_tag),
-- have_err ? ATA_ERR : 0);
--}
--
- static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
- {
- void *mmio = ap->host_set->mmio_base;
-@@ -569,7 +574,7 @@
- writel(tmp, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* flush */
-
-- printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->port_no);
-+ printk(KERN_WARNING "ata%u: error occurred, port reset\n", ap->id);
- }
-
- static void ahci_eng_timeout(struct ata_port *ap)
-@@ -761,10 +766,10 @@
-
- using_dac = hpriv->cap & HOST_CAP_64;
- if (using_dac &&
-- !pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
-+ !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
- hpriv->flags |= HOST_CAP_64;
- } else {
-- rc = pci_set_dma_mask(pdev, 0xffffffffULL);
-+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
-@@ -929,6 +934,7 @@
- unsigned long base;
- void *mmio_base;
- unsigned int board_idx = (unsigned int) ent->driver_data;
-+ int pci_dev_busy = 0;
- int rc;
-
- VPRINTK("ENTER\n");
-@@ -941,8 +947,10 @@
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- pci_enable_intx(pdev);
-
-@@ -1002,7 +1010,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/aic7xxx/aic79xx_pci.c linux-mips/drivers/scsi/aic7xxx/aic79xx_pci.c
---- linux-2.4.29/drivers/scsi/aic7xxx/aic79xx_pci.c 2003-08-25 13:44:42.000000000 +0200
-+++ linux-mips/drivers/scsi/aic7xxx/aic79xx_pci.c 2005-03-26 11:47:34.828935512 +0100
-@@ -451,8 +451,10 @@
- * or read prefetching could be initiated by the
- * CPU or host bridge. Our device does not support
- * either, so look for data corruption and/or flaged
-- * PCI errors.
-+ * PCI errors. First pause without causing another
-+ * chip reset.
- */
-+ hcntrl &= ~CHIPRST;
- ahd_outb(ahd, HCNTRL, hcntrl|PAUSE);
- while (ahd_is_paused(ahd) == 0)
- ;
-diff -Nur linux-2.4.29/drivers/scsi/aic7xxx/aic7xxx_pci.c linux-mips/drivers/scsi/aic7xxx/aic7xxx_pci.c
---- linux-2.4.29/drivers/scsi/aic7xxx/aic7xxx_pci.c 2003-08-25 13:44:42.000000000 +0200
-+++ linux-mips/drivers/scsi/aic7xxx/aic7xxx_pci.c 2005-03-26 11:47:34.831935020 +0100
-@@ -1284,8 +1284,10 @@
- * or read prefetching could be initiated by the
- * CPU or host bridge. Our device does not support
- * either, so look for data corruption and/or flagged
-- * PCI errors.
-+ * PCI errors. First pause without causing another
-+ * chip reset.
- */
-+ hcntrl &= ~CHIPRST;
- ahc_outb(ahc, HCNTRL, hcntrl|PAUSE);
- while (ahc_is_paused(ahc) == 0)
- ;
-diff -Nur linux-2.4.29/drivers/scsi/ata_piix.c linux-mips/drivers/scsi/ata_piix.c
---- linux-2.4.29/drivers/scsi/ata_piix.c 2005-01-19 15:10:01.000000000 +0100
-+++ linux-mips/drivers/scsi/ata_piix.c 2005-03-26 11:47:32.450325897 +0100
-@@ -139,6 +139,8 @@
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
-@@ -164,6 +166,8 @@
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
-diff -Nur linux-2.4.29/drivers/scsi/Config.in linux-mips/drivers/scsi/Config.in
---- linux-2.4.29/drivers/scsi/Config.in 2005-01-19 15:09:59.000000000 +0100
-+++ linux-mips/drivers/scsi/Config.in 2005-03-26 11:47:32.437328030 +0100
-@@ -73,6 +73,7 @@
- dep_tristate ' ServerWorks Frodo / Apple K2 SATA support (EXPERIMENTAL)' CONFIG_SCSI_SATA_SVW $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
- dep_tristate ' Intel PIIX/ICH SATA support' CONFIG_SCSI_ATA_PIIX $CONFIG_SCSI_SATA $CONFIG_PCI
- dep_tristate ' NVIDIA SATA support (EXPERIMENTAL)' CONFIG_SCSI_SATA_NV $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
-+dep_tristate ' Pacific Digital SATA QStor support' CONFIG_SCSI_SATA_QSTOR $CONFIG_SCSI_SATA $CONFIG_PCI
- dep_tristate ' Promise SATA TX2/TX4 support (EXPERIMENTAL)' CONFIG_SCSI_SATA_PROMISE $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
- dep_tristate ' Promise SATA SX4 support (EXPERIMENTAL)' CONFIG_SCSI_SATA_SX4 $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
- dep_tristate ' Silicon Image SATA support (EXPERIMENTAL)' CONFIG_SCSI_SATA_SIL $CONFIG_SCSI_SATA $CONFIG_PCI $CONFIG_EXPERIMENTAL
-diff -Nur linux-2.4.29/drivers/scsi/libata-core.c linux-mips/drivers/scsi/libata-core.c
---- linux-2.4.29/drivers/scsi/libata-core.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/libata-core.c 2005-03-26 11:47:32.481320810 +0100
-@@ -376,7 +376,7 @@
- }
-
- /**
-- * ata_check_status - Read device status reg & clear interrupt
-+ * ata_check_status_pio - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Reads ATA taskfile status register for currently-selected device
-@@ -414,6 +414,27 @@
- return ata_check_status_pio(ap);
- }
-
-+u8 ata_altstatus(struct ata_port *ap)
-+{
-+ if (ap->ops->check_altstatus)
-+ return ap->ops->check_altstatus(ap);
-+
-+ if (ap->flags & ATA_FLAG_MMIO)
-+ return readb((void __iomem *)ap->ioaddr.altstatus_addr);
-+ return inb(ap->ioaddr.altstatus_addr);
-+}
-+
-+u8 ata_chk_err(struct ata_port *ap)
-+{
-+ if (ap->ops->check_err)
-+ return ap->ops->check_err(ap);
-+
-+ if (ap->flags & ATA_FLAG_MMIO) {
-+ return readb((void __iomem *) ap->ioaddr.error_addr);
-+ }
-+ return inb(ap->ioaddr.error_addr);
-+}
-+
- /**
- * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
- * @tf: Taskfile to convert
-@@ -1160,7 +1181,6 @@
- printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n",
- ap->id, device);
- err_out:
-- ata_irq_on(ap); /* re-enable interrupts */
- dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */
- DPRINTK("EXIT, err\n");
- }
-@@ -1668,7 +1688,8 @@
- ata_dev_try_classify(ap, 1);
-
- /* re-enable interrupts */
-- ata_irq_on(ap);
-+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
-+ ata_irq_on(ap);
-
- /* is double-select really necessary? */
- if (ap->device[1].class != ATA_DEV_NONE)
-@@ -1699,6 +1720,69 @@
- DPRINTK("EXIT\n");
- }
-
-+static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
-+{
-+ printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
-+ ap->id, dev->devno);
-+}
-+
-+static const char * ata_dma_blacklist [] = {
-+ "WDC AC11000H",
-+ "WDC AC22100H",
-+ "WDC AC32500H",
-+ "WDC AC33100H",
-+ "WDC AC31600H",
-+ "WDC AC32100H",
-+ "WDC AC23200L",
-+ "Compaq CRD-8241B",
-+ "CRD-8400B",
-+ "CRD-8480B",
-+ "CRD-8482B",
-+ "CRD-84",
-+ "SanDisk SDP3B",
-+ "SanDisk SDP3B-64",
-+ "SANYO CD-ROM CRD",
-+ "HITACHI CDR-8",
-+ "HITACHI CDR-8335",
-+ "HITACHI CDR-8435",
-+ "Toshiba CD-ROM XM-6202B",
-+ "CD-532E-A",
-+ "E-IDE CD-ROM CR-840",
-+ "CD-ROM Drive/F5A",
-+ "WPI CDD-820",
-+ "SAMSUNG CD-ROM SC-148C",
-+ "SAMSUNG CD-ROM SC",
-+ "SanDisk SDP3B-64",
-+ "SAMSUNG CD-ROM SN-124",
-+ "ATAPI CD-ROM DRIVE 40X MAXIMUM",
-+ "_NEC DV5800A",
-+};
-+
-+static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
-+{
-+ unsigned char model_num[40];
-+ char *s;
-+ unsigned int len;
-+ int i;
-+
-+ ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
-+ sizeof(model_num));
-+ s = &model_num[0];
-+ len = strnlen(s, sizeof(model_num));
-+
-+ /* ATAPI specifies that empty space is blank-filled; remove blanks */
-+ while ((len > 0) && (s[len - 1] == ' ')) {
-+ len--;
-+ s[len] = 0;
-+ }
-+
-+ for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
-+ if (!strncmp(ata_dma_blacklist[i], s, len))
-+ return 1;
-+
-+ return 0;
-+}
-+
- static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
- {
- struct ata_device *master, *slave;
-@@ -1711,17 +1795,37 @@
-
- if (shift == ATA_SHIFT_UDMA) {
- mask = ap->udma_mask;
-- if (ata_dev_present(master))
-+ if (ata_dev_present(master)) {
- mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
-- if (ata_dev_present(slave))
-+ if (ata_dma_blacklisted(ap, master)) {
-+ mask = 0;
-+ ata_pr_blacklisted(ap, master);
-+ }
-+ }
-+ if (ata_dev_present(slave)) {
- mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
-+ if (ata_dma_blacklisted(ap, slave)) {
-+ mask = 0;
-+ ata_pr_blacklisted(ap, slave);
-+ }
-+ }
- }
- else if (shift == ATA_SHIFT_MWDMA) {
- mask = ap->mwdma_mask;
-- if (ata_dev_present(master))
-+ if (ata_dev_present(master)) {
- mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
-- if (ata_dev_present(slave))
-+ if (ata_dma_blacklisted(ap, master)) {
-+ mask = 0;
-+ ata_pr_blacklisted(ap, master);
-+ }
-+ }
-+ if (ata_dev_present(slave)) {
- mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
-+ if (ata_dma_blacklisted(ap, slave)) {
-+ mask = 0;
-+ ata_pr_blacklisted(ap, slave);
-+ }
-+ }
- }
- else if (shift == ATA_SHIFT_PIO) {
- mask = ap->pio_mask;
-@@ -2518,10 +2622,10 @@
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
-- host_stat = ata_bmdma_status(ap);
-+ host_stat = ap->ops->bmdma_status(ap);
-
- /* before we do anything else, clear DMA-Start bit */
-- ata_bmdma_stop(ap);
-+ ap->ops->bmdma_stop(ap);
-
- /* fall through */
-
-@@ -2530,7 +2634,7 @@
- drv_stat = ata_chk_status(ap);
-
- /* ack bmdma irq events */
-- ata_bmdma_ack_irq(ap);
-+ ap->ops->irq_clear(ap);
-
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat, host_stat);
-@@ -2669,6 +2773,24 @@
- }
-
- /**
-+ * ata_qc_free - free unused ata_queued_cmd
-+ * @qc: Command to complete
-+ *
-+ * Designed to free unused ata_queued_cmd object
-+ * in case something prevents using it.
-+ *
-+ * LOCKING:
-+ *
-+ */
-+void ata_qc_free(struct ata_queued_cmd *qc)
-+{
-+ assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */
-+ assert(qc->waiting == NULL); /* nothing should be waiting */
-+
-+ __ata_qc_complete(qc);
-+}
-+
-+/**
- * ata_qc_complete - Complete an active ATA command
- * @qc: Command to complete
- * @drv_stat: ATA status register contents
-@@ -2717,7 +2839,7 @@
- return 1;
-
- /* fall through */
--
-+
- default:
- return 0;
- }
-@@ -2959,7 +3081,43 @@
-
- void ata_bmdma_irq_clear(struct ata_port *ap)
- {
-- ata_bmdma_ack_irq(ap);
-+ if (ap->flags & ATA_FLAG_MMIO) {
-+ void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
-+ writeb(readb(mmio), mmio);
-+ } else {
-+ unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
-+ outb(inb(addr), addr);
-+ }
-+
-+}
-+
-+u8 ata_bmdma_status(struct ata_port *ap)
-+{
-+ u8 host_stat;
-+ if (ap->flags & ATA_FLAG_MMIO) {
-+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-+ host_stat = readb(mmio + ATA_DMA_STATUS);
-+ } else
-+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-+ return host_stat;
-+}
-+
-+void ata_bmdma_stop(struct ata_port *ap)
-+{
-+ if (ap->flags & ATA_FLAG_MMIO) {
-+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-+
-+ /* clear start/stop bit */
-+ writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
-+ mmio + ATA_DMA_CMD);
-+ } else {
-+ /* clear start/stop bit */
-+ outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
-+ ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-+ }
-+
-+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-+ ata_altstatus(ap); /* dummy read */
- }
-
- /**
-@@ -2989,7 +3147,7 @@
- case ATA_PROT_ATAPI_DMA:
- case ATA_PROT_ATAPI:
- /* check status of DMA engine */
-- host_stat = ata_bmdma_status(ap);
-+ host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
-
- /* if it's not our irq... */
-@@ -2997,7 +3155,7 @@
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
-- ata_bmdma_stop(ap);
-+ ap->ops->bmdma_stop(ap);
-
- /* fall through */
-
-@@ -3016,7 +3174,7 @@
- ap->id, qc->tf.protocol, status);
-
- /* ack bmdma irq events */
-- ata_bmdma_ack_irq(ap);
-+ ap->ops->irq_clear(ap);
-
- /* complete taskfile transaction */
- ata_qc_complete(qc, status);
-@@ -3470,32 +3628,28 @@
- }
-
- static struct ata_probe_ent *
--ata_probe_ent_alloc(int n, struct device *dev, struct ata_port_info **port)
-+ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
- {
- struct ata_probe_ent *probe_ent;
-- int i;
-
-- probe_ent = kmalloc(sizeof(*probe_ent) * n, GFP_KERNEL);
-+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
- if (!probe_ent) {
- printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
- pci_name(to_pci_dev(dev)));
- return NULL;
- }
-
-- memset(probe_ent, 0, sizeof(*probe_ent) * n);
-+ memset(probe_ent, 0, sizeof(*probe_ent));
-
-- for (i = 0; i < n; i++) {
-- INIT_LIST_HEAD(&probe_ent[i].node);
-- probe_ent[i].dev = dev;
--
-- probe_ent[i].sht = port[i]->sht;
-- probe_ent[i].host_flags = port[i]->host_flags;
-- probe_ent[i].pio_mask = port[i]->pio_mask;
-- probe_ent[i].mwdma_mask = port[i]->mwdma_mask;
-- probe_ent[i].udma_mask = port[i]->udma_mask;
-- probe_ent[i].port_ops = port[i]->port_ops;
-+ INIT_LIST_HEAD(&probe_ent->node);
-+ probe_ent->dev = dev;
-
-- }
-+ probe_ent->sht = port->sht;
-+ probe_ent->host_flags = port->host_flags;
-+ probe_ent->pio_mask = port->pio_mask;
-+ probe_ent->mwdma_mask = port->mwdma_mask;
-+ probe_ent->udma_mask = port->udma_mask;
-+ probe_ent->port_ops = port->port_ops;
-
- return probe_ent;
- }
-@@ -3505,7 +3659,7 @@
- ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
- {
- struct ata_probe_ent *probe_ent =
-- ata_probe_ent_alloc(1, pci_dev_to_dev(pdev), port);
-+ ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
- if (!probe_ent)
- return NULL;
-
-@@ -3531,39 +3685,47 @@
- return probe_ent;
- }
-
--struct ata_probe_ent *
--ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port)
-+static struct ata_probe_ent *
-+ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
-+ struct ata_probe_ent **ppe2)
- {
-- struct ata_probe_ent *probe_ent =
-- ata_probe_ent_alloc(2, pci_dev_to_dev(pdev), port);
-+ struct ata_probe_ent *probe_ent, *probe_ent2;
-+
-+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
- if (!probe_ent)
- return NULL;
-+ probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
-+ if (!probe_ent2) {
-+ kfree(probe_ent);
-+ return NULL;
-+ }
-+
-+ probe_ent->n_ports = 1;
-+ probe_ent->irq = 14;
-
-- probe_ent[0].n_ports = 1;
-- probe_ent[0].irq = 14;
-+ probe_ent->hard_port_no = 0;
-+ probe_ent->legacy_mode = 1;
-
-- probe_ent[0].hard_port_no = 0;
-- probe_ent[0].legacy_mode = 1;
-+ probe_ent2->n_ports = 1;
-+ probe_ent2->irq = 15;
-
-- probe_ent[1].n_ports = 1;
-- probe_ent[1].irq = 15;
-+ probe_ent2->hard_port_no = 1;
-+ probe_ent2->legacy_mode = 1;
-
-- probe_ent[1].hard_port_no = 1;
-- probe_ent[1].legacy_mode = 1;
--
-- probe_ent[0].port[0].cmd_addr = 0x1f0;
-- probe_ent[0].port[0].altstatus_addr =
-- probe_ent[0].port[0].ctl_addr = 0x3f6;
-- probe_ent[0].port[0].bmdma_addr = pci_resource_start(pdev, 4);
--
-- probe_ent[1].port[0].cmd_addr = 0x170;
-- probe_ent[1].port[0].altstatus_addr =
-- probe_ent[1].port[0].ctl_addr = 0x376;
-- probe_ent[1].port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
-+ probe_ent->port[0].cmd_addr = 0x1f0;
-+ probe_ent->port[0].altstatus_addr =
-+ probe_ent->port[0].ctl_addr = 0x3f6;
-+ probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-+
-+ probe_ent2->port[0].cmd_addr = 0x170;
-+ probe_ent2->port[0].altstatus_addr =
-+ probe_ent2->port[0].ctl_addr = 0x376;
-+ probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
-
-- ata_std_ports(&probe_ent[0].port[0]);
-- ata_std_ports(&probe_ent[1].port[0]);
-+ ata_std_ports(&probe_ent->port[0]);
-+ ata_std_ports(&probe_ent2->port[0]);
-
-+ *ppe2 = probe_ent2;
- return probe_ent;
- }
-
-@@ -3587,6 +3749,7 @@
- struct ata_port_info *port[2];
- u8 tmp8, mask;
- unsigned int legacy_mode = 0;
-+ int disable_dev_on_err = 1;
- int rc;
-
- DPRINTK("ENTER\n");
-@@ -3597,7 +3760,8 @@
- else
- port[1] = port[0];
-
-- if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0) {
-+ if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
-+ && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- /* TODO: support transitioning to native mode? */
- pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
- mask = (1 << 2) | (1 << 0);
-@@ -3616,18 +3780,22 @@
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ disable_dev_on_err = 0;
- goto err_out;
-+ }
-
- if (legacy_mode) {
-- if (!request_region(0x1f0, 8, "libata"))
-+ if (!request_region(0x1f0, 8, "libata")) {
-+ disable_dev_on_err = 0;
- printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
-- else
-+ } else
- legacy_mode |= (1 << 0);
-
-- if (!request_region(0x170, 8, "libata"))
-+ if (!request_region(0x170, 8, "libata")) {
-+ disable_dev_on_err = 0;
- printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
-- else
-+ } else
- legacy_mode |= (1 << 1);
- }
-
-@@ -3642,9 +3810,7 @@
- goto err_out_regions;
-
- if (legacy_mode) {
-- probe_ent = ata_pci_init_legacy_mode(pdev, port);
-- if (probe_ent)
-- probe_ent2 = &probe_ent[1];
-+ probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
- } else
- probe_ent = ata_pci_init_native_mode(pdev, port);
- if (!probe_ent) {
-@@ -3656,17 +3822,14 @@
-
- spin_lock(&ata_module_lock);
- if (legacy_mode) {
-- int free = 0;
- if (legacy_mode & (1 << 0))
- list_add_tail(&probe_ent->node, &ata_probe_list);
- else
-- free++;
-+ kfree(probe_ent);
- if (legacy_mode & (1 << 1))
- list_add_tail(&probe_ent2->node, &ata_probe_list);
- else
-- free++;
-- if (free > 1)
-- kfree(probe_ent);
-+ kfree(probe_ent2);
- } else {
- list_add_tail(&probe_ent->node, &ata_probe_list);
- }
-@@ -3681,7 +3844,8 @@
- release_region(0x170, 8);
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (disable_dev_on_err)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-@@ -3723,15 +3887,12 @@
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
-
-- pci_release_regions(pdev);
--
- for (i = 0; i < host_set->n_ports; i++) {
-- struct ata_ioports *ioaddr;
--
- ap = host_set->ports[i];
-- ioaddr = &ap->ioaddr;
-
- if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
-+ struct ata_ioports *ioaddr = &ap->ioaddr;
-+
- if (ioaddr->cmd_addr == 0x1f0)
- release_region(0x1f0, 8);
- else if (ioaddr->cmd_addr == 0x170)
-@@ -3740,6 +3901,8 @@
- }
-
- kfree(host_set);
-+
-+ pci_release_regions(pdev);
- pci_disable_device(pdev);
- dev_set_drvdata(dev, NULL);
- }
-@@ -3839,6 +4002,8 @@
- EXPORT_SYMBOL_GPL(ata_tf_to_fis);
- EXPORT_SYMBOL_GPL(ata_tf_from_fis);
- EXPORT_SYMBOL_GPL(ata_check_status);
-+EXPORT_SYMBOL_GPL(ata_altstatus);
-+EXPORT_SYMBOL_GPL(ata_chk_err);
- EXPORT_SYMBOL_GPL(ata_exec_command);
- EXPORT_SYMBOL_GPL(ata_port_start);
- EXPORT_SYMBOL_GPL(ata_port_stop);
-@@ -3847,6 +4012,8 @@
- EXPORT_SYMBOL_GPL(ata_bmdma_setup);
- EXPORT_SYMBOL_GPL(ata_bmdma_start);
- EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
-+EXPORT_SYMBOL_GPL(ata_bmdma_status);
-+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
- EXPORT_SYMBOL_GPL(ata_port_probe);
- EXPORT_SYMBOL_GPL(sata_phy_reset);
- EXPORT_SYMBOL_GPL(__sata_phy_reset);
-@@ -3857,7 +4024,6 @@
- EXPORT_SYMBOL_GPL(ata_scsi_error);
- EXPORT_SYMBOL_GPL(ata_scsi_detect);
- EXPORT_SYMBOL_GPL(ata_add_to_probe_list);
--EXPORT_SYMBOL_GPL(libata_msleep);
- EXPORT_SYMBOL_GPL(ssleep);
- EXPORT_SYMBOL_GPL(ata_scsi_release);
- EXPORT_SYMBOL_GPL(ata_host_intr);
-@@ -3867,7 +4033,6 @@
-
- #ifdef CONFIG_PCI
- EXPORT_SYMBOL_GPL(pci_test_config_bits);
--EXPORT_SYMBOL_GPL(ata_pci_init_legacy_mode);
- EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
- EXPORT_SYMBOL_GPL(ata_pci_init_one);
- EXPORT_SYMBOL_GPL(ata_pci_remove_one);
-diff -Nur linux-2.4.29/drivers/scsi/libata.h linux-mips/drivers/scsi/libata.h
---- linux-2.4.29/drivers/scsi/libata.h 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/libata.h 2005-03-26 11:47:32.487319825 +0100
-@@ -37,6 +37,7 @@
- /* libata-core.c */
- extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
- struct ata_device *dev);
-+extern void ata_qc_free(struct ata_queued_cmd *qc);
- extern int ata_qc_issue(struct ata_queued_cmd *qc);
- extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
- extern void ata_dev_select(struct ata_port *ap, unsigned int device,
-diff -Nur linux-2.4.29/drivers/scsi/libata-scsi.c linux-mips/drivers/scsi/libata-scsi.c
---- linux-2.4.29/drivers/scsi/libata-scsi.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/libata-scsi.c 2005-03-26 11:47:32.485320153 +0100
-@@ -203,7 +203,7 @@
- {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error
- /* BBD - block marked bad */
- {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
-- {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
-+ {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
- };
- static unsigned char stat_table[][4] = {
- /* Must be first because BUSY means no other bits valid */
-@@ -211,22 +211,22 @@
- {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
- {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now
- {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
-- {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
-+ {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
- };
- int i = 0;
-
- cmd->result = SAM_STAT_CHECK_CONDITION;
--
-+
- /*
- * Is this an error we can process/parse
- */
--
-+
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
--
-+
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
-@@ -243,7 +243,7 @@
- if(drv_stat & 0x01) printk("Error ");
- }
- printk("}\n");
--
-+
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
-@@ -260,11 +260,11 @@
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
--
-+
- /* Should we dump sector info here too ?? */
- }
--
--
-+
-+
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
-@@ -283,7 +283,8 @@
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
--
-+
-+ i = 0;
- /* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
-@@ -301,7 +302,7 @@
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
--
-+
- sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
-@@ -449,19 +450,24 @@
- }
-
- if (lba48) {
-+ tf->command = ATA_CMD_VERIFY_EXT;
-+
- tf->hob_nsect = (n_sect >> 8) & 0xff;
-
- tf->hob_lbah = (sect >> 40) & 0xff;
- tf->hob_lbam = (sect >> 32) & 0xff;
- tf->hob_lbal = (sect >> 24) & 0xff;
-- } else
-+ } else {
-+ tf->command = ATA_CMD_VERIFY;
-+
- tf->device |= (sect >> 24) & 0xf;
-+ }
-
- tf->nsect = n_sect & 0xff;
-
-- tf->hob_lbah = (sect >> 16) & 0xff;
-- tf->hob_lbam = (sect >> 8) & 0xff;
-- tf->hob_lbal = sect & 0xff;
-+ tf->lbah = (sect >> 16) & 0xff;
-+ tf->lbam = (sect >> 8) & 0xff;
-+ tf->lbal = sect & 0xff;
-
- return 0;
- }
-@@ -561,7 +567,7 @@
- return 1;
-
- /* stores LBA27:24 in lower 4 bits of device reg */
-- tf->device |= scsicmd[2];
-+ tf->device |= scsicmd[6];
-
- qc->nsect = scsicmd[13];
- }
-@@ -657,6 +663,7 @@
- return;
-
- err_out:
-+ ata_qc_free(qc);
- ata_bad_cdb(cmd, done);
- DPRINTK("EXIT - badcmd\n");
- }
-diff -Nur linux-2.4.29/drivers/scsi/Makefile linux-mips/drivers/scsi/Makefile
---- linux-2.4.29/drivers/scsi/Makefile 2005-01-19 15:09:59.000000000 +0100
-+++ linux-mips/drivers/scsi/Makefile 2005-03-26 11:47:32.445326717 +0100
-@@ -134,6 +134,7 @@
- obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
- obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
- obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
-+obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
- obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
- obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
- obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
-diff -Nur linux-2.4.29/drivers/scsi/megaraid2.c linux-mips/drivers/scsi/megaraid2.c
---- linux-2.4.29/drivers/scsi/megaraid2.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/scsi/megaraid2.c 2005-03-26 11:47:33.007234495 +0100
-@@ -14,7 +14,7 @@
- * - speed-ups (list handling fixes, issued_list, optimizations.)
- * - lots of cleanups.
- *
-- * Version : v2.10.3 (Apr 08, 2004)
-+ * Version : v2.10.8.2 (July 26, 2004)
- *
- * Authors: Atul Mukker <Atul.Mukker@lsil.com>
- * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
-@@ -46,7 +46,7 @@
-
- #include "megaraid2.h"
-
--#ifdef LSI_CONFIG_COMPAT
-+#if defined(__x86_64__)
- #include <asm/ioctl32.h>
- #endif
-
-@@ -90,10 +90,15 @@
- static struct mega_hbas mega_hbas[MAX_CONTROLLERS];
-
- /*
-+ * Lock to protect access to IOCTL
-+ */
-+static struct semaphore megaraid_ioc_mtx;
-+
-+/*
- * The File Operations structure for the serial/ioctl interface of the driver
- */
- static struct file_operations megadev_fops = {
-- .ioctl = megadev_ioctl,
-+ .ioctl = megadev_ioctl_entry,
- .open = megadev_open,
- .release = megadev_close,
- .owner = THIS_MODULE,
-@@ -107,7 +112,7 @@
- static struct mcontroller mcontroller[MAX_CONTROLLERS];
-
- /* The current driver version */
--static u32 driver_ver = 0x02100000;
-+static u32 driver_ver = 0x02104000;
-
- /* major number used by the device for character interface */
- static int major;
-@@ -189,6 +194,11 @@
- */
- mega_reorder_hosts();
-
-+ /*
-+ * Initialize the IOCTL lock
-+ */
-+ init_MUTEX( &megaraid_ioc_mtx );
-+
- #ifdef CONFIG_PROC_FS
- mega_proc_dir_entry = proc_mkdir("megaraid", &proc_root);
-
-@@ -223,7 +233,7 @@
- "MegaRAID Shutdown routine not registered!!\n");
- }
-
--#ifdef LSI_CONFIG_COMPAT
-+#if defined(__x86_64__)
- /*
- * Register the 32-bit ioctl conversion
- */
-@@ -273,6 +283,8 @@
- unsigned long tbase;
- unsigned long flag = 0;
- int i, j;
-+ u8 did_int_pthru_f = 0;
-+ u8 did_int_data_f = 0;
-
- while((pdev = pci_find_device(pci_vendor, pci_device, pdev))) {
-
-@@ -328,6 +340,7 @@
- (subsysvid != HP_SUBSYS_VID) &&
- (subsysvid != INTEL_SUBSYS_VID) &&
- (subsysvid != FSC_SUBSYS_VID) &&
-+ (subsysvid != ACER_SUBSYS_VID) &&
- (subsysvid != LSI_SUBSYS_VID) ) continue;
-
-
-@@ -465,6 +478,33 @@
-
- alloc_scb_f = 1;
-
-+ /*
-+ * Allocate memory for ioctls
-+ */
-+ adapter->int_pthru = pci_alloc_consistent (
-+ adapter->dev,
-+ sizeof(mega_passthru),
-+ &adapter->int_pthru_dma_hndl );
-+
-+ if( adapter->int_pthru == NULL ) {
-+ printk(KERN_WARNING "megaraid: out of RAM.\n");
-+ goto fail_attach;
-+ }
-+ else
-+ did_int_pthru_f = 1;
-+
-+ adapter->int_data = pci_alloc_consistent (
-+ adapter->dev,
-+ INT_MEMBLK_SZ,
-+ &adapter->int_data_dma_hndl );
-+
-+ if( adapter->int_data == NULL ) {
-+ printk(KERN_WARNING "megaraid: out of RAM.\n");
-+ goto fail_attach;
-+ }
-+ else
-+ did_int_data_f = 1;
-+
- /* Request our IRQ */
- if( adapter->flag & BOARD_MEMMAP ) {
- if(request_irq(irq, megaraid_isr_memmapped, SA_SHIRQ,
-@@ -676,6 +716,19 @@
- continue;
-
- fail_attach:
-+ if( did_int_data_f ) {
-+ pci_free_consistent(
-+ adapter->dev, INT_MEMBLK_SZ, adapter->int_data,
-+ adapter->int_data_dma_hndl );
-+ }
-+
-+ if( did_int_pthru_f ) {
-+ pci_free_consistent(
-+ adapter->dev, sizeof(mega_passthru),
-+ (void*) adapter->int_pthru,
-+ adapter->int_pthru_dma_hndl );
-+ }
-+
- if( did_setup_mbox_f ) {
- pci_free_consistent(adapter->dev, sizeof(mbox64_t),
- (void *)adapter->una_mbox64,
-@@ -937,6 +990,78 @@
-
-
- /**
-+ * issue_scb()
-+ * @adapter - pointer to our soft state
-+ * @scb - scsi control block
-+ *
-+ * Post a command to the card if the mailbox is available, otherwise return
-+ * busy. We also take the scb from the pending list if the mailbox is
-+ * available.
-+ */
-+static inline int
-+issue_scb(adapter_t *adapter, scb_t *scb)
-+{
-+ volatile mbox64_t *mbox64 = adapter->mbox64;
-+ volatile mbox_t *mbox = adapter->mbox;
-+ unsigned int i = 0;
-+
-+ if(unlikely(mbox->busy)) {
-+ do {
-+ udelay(1);
-+ i++;
-+ } while( mbox->busy && (i < max_mbox_busy_wait) );
-+
-+ if(mbox->busy) return -1;
-+ }
-+
-+ /* Copy mailbox data into host structure */
-+ memcpy((char *)mbox, (char *)scb->raw_mbox, 16);
-+
-+ mbox->cmdid = scb->idx; /* Set cmdid */
-+ mbox->busy = 1; /* Set busy */
-+
-+
-+ /*
-+ * Increment the pending queue counter
-+ */
-+ atomic_inc(&adapter->pend_cmds);
-+
-+ switch (mbox->cmd) {
-+ case MEGA_MBOXCMD_EXTPTHRU:
-+ if( !adapter->has_64bit_addr ) break;
-+ // else fall through
-+ case MEGA_MBOXCMD_LREAD64:
-+ case MEGA_MBOXCMD_LWRITE64:
-+ case MEGA_MBOXCMD_PASSTHRU64:
-+ mbox64->xfer_segment_lo = mbox->xferaddr;
-+ mbox64->xfer_segment_hi = 0;
-+ mbox->xferaddr = 0xFFFFFFFF;
-+ break;
-+ default:
-+ mbox64->xfer_segment_lo = 0;
-+ mbox64->xfer_segment_hi = 0;
-+ }
-+
-+ /*
-+ * post the command
-+ */
-+ scb->state |= SCB_ISSUED;
-+
-+ if( likely(adapter->flag & BOARD_MEMMAP) ) {
-+ mbox->poll = 0;
-+ mbox->ack = 0;
-+ WRINDOOR(adapter, adapter->mbox_dma | 0x1);
-+ }
-+ else {
-+ irq_enable(adapter);
-+ issue_command(adapter);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/**
- * mega_runpendq()
- * @adapter - pointer to our soft state
- *
-@@ -949,52 +1074,26 @@
- __mega_runpendq(adapter);
- }
-
--/*
-- * megaraid_queue()
-- * @scmd - Issue this scsi command
-- * @done - the callback hook into the scsi mid-layer
-- *
-- * The command queuing entry point for the mid-layer.
-- */
--static int
--megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
--{
-- adapter_t *adapter;
-- scb_t *scb;
-- int busy=0;
--
-- adapter = (adapter_t *)scmd->host->hostdata;
--
-- scmd->scsi_done = done;
-
-+static void
-+__mega_runpendq(adapter_t *adapter)
-+{
-+ scb_t *scb;
-+ struct list_head *pos, *next;
-
-- /*
-- * Allocate and build a SCB request
-- * busy flag will be set if mega_build_cmd() command could not
-- * allocate scb. We will return non-zero status in that case.
-- * NOTE: scb can be null even though certain commands completed
-- * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would
-- * return 0 in that case.
-- */
-+ /* Issue any pending commands to the card */
-+ list_for_each_safe(pos, next, &adapter->pending_list) {
-
-- scb = mega_build_cmd(adapter, scmd, &busy);
-+ scb = list_entry(pos, scb_t, list);
-
-- if(scb) {
-- scb->state |= SCB_PENDQ;
-- list_add_tail(&scb->list, &adapter->pending_list);
-+ if( !(scb->state & SCB_ISSUED) ) {
-
-- /*
-- * Check if the HBA is in quiescent state, e.g., during a
-- * delete logical drive opertion. If it is, don't run
-- * the pending_list.
-- */
-- if(atomic_read(&adapter->quiescent) == 0) {
-- mega_runpendq(adapter);
-+ if( issue_scb(adapter, scb) != 0 )
-+ return;
- }
-- return 0;
- }
-
-- return busy;
-+ return;
- }
-
-
-@@ -1068,25 +1167,136 @@
- }
-
- /*
-- * If "delete logical drive" feature is enabled on this controller.
-- * Do only if at least one delete logical drive operation was done.
-- *
-- * Also, after logical drive deletion, instead of logical drive number,
-+ * If "delete logical drive" feature is enabled on this controller,
- * the value returned should be 0x80+logical drive id.
-- *
-- * These is valid only for IO commands.
- */
-+ if (adapter->support_random_del)
-+ ldrv_num += 0x80;
-
-- if (adapter->support_random_del && adapter->read_ldidmap )
-- switch (cmd->cmnd[0]) {
-- case READ_6: /* fall through */
-- case WRITE_6: /* fall through */
-- case READ_10: /* fall through */
-- case WRITE_10:
-- ldrv_num += 0x80;
-+ return ldrv_num;
-+}
-+
-+/*
-+ * Wait until the controller's mailbox is available
-+ */
-+static inline int
-+mega_busywait_mbox (adapter_t *adapter)
-+{
-+ if (adapter->mbox->busy)
-+ return __mega_busywait_mbox(adapter);
-+ return 0;
-+}
-+
-+
-+/**
-+ * megaraid_iombox_ack_sequence - interrupt ack sequence for IO mapped HBAs
-+ * @adapter - controller's soft state
-+ *
-+ * Interrupt ackrowledgement sequence for IO mapped HBAs
-+ */
-+static inline void
-+megaraid_iombox_ack_sequence(adapter_t *adapter)
-+{
-+ u8 status;
-+ u8 nstatus;
-+ u8 completed[MAX_FIRMWARE_STATUS];
-+ u8 byte;
-+ int i;
-+
-+
-+ /*
-+ * loop till F/W has more commands for us to complete.
-+ */
-+ do {
-+ /* Check if a valid interrupt is pending */
-+ byte = irq_state(adapter);
-+ if( (byte & VALID_INTR_BYTE) == 0 ) {
-+ return;
- }
-+ set_irq_state(adapter, byte);
-
-- return ldrv_num;
-+ while ((nstatus = adapter->mbox->numstatus) == 0xFF) {
-+ cpu_relax();
-+ }
-+ adapter->mbox->numstatus = 0xFF;
-+
-+ for (i = 0; i < nstatus; i++) {
-+ while ((completed[i] = adapter->mbox->completed[i])
-+ == 0xFF) {
-+ cpu_relax();
-+ }
-+
-+ adapter->mbox->completed[i] = 0xFF;
-+ }
-+
-+ // we must read the valid status now
-+ if ((status = adapter->mbox->status) == 0xFF) {
-+ printk(KERN_WARNING
-+ "megaraid critical: status 0xFF from firmware.\n");
-+ }
-+ adapter->mbox->status = 0xFF;
-+
-+ /*
-+ * decrement the pending queue counter
-+ */
-+ atomic_sub(nstatus, &adapter->pend_cmds);
-+
-+ /* Acknowledge interrupt */
-+ irq_ack(adapter);
-+
-+ mega_cmd_done(adapter, completed, nstatus, status);
-+
-+ } while(1);
-+}
-+
-+
-+
-+/*
-+ * megaraid_queue()
-+ * @scmd - Issue this scsi command
-+ * @done - the callback hook into the scsi mid-layer
-+ *
-+ * The command queuing entry point for the mid-layer.
-+ */
-+static int
-+megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
-+{
-+ adapter_t *adapter;
-+ scb_t *scb;
-+ int busy=0;
-+
-+ adapter = (adapter_t *)scmd->host->hostdata;
-+
-+ scmd->scsi_done = done;
-+
-+
-+ /*
-+ * Allocate and build a SCB request
-+ * busy flag will be set if mega_build_cmd() command could not
-+ * allocate scb. We will return non-zero status in that case.
-+ * NOTE: scb can be null even though certain commands completed
-+ * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would
-+ * return 0 in that case.
-+ */
-+
-+ scb = mega_build_cmd(adapter, scmd, &busy);
-+
-+ if(scb) {
-+ scb->state |= SCB_PENDQ;
-+ list_add_tail(&scb->list, &adapter->pending_list);
-+
-+ /*
-+ * Check if the HBA is in quiescent state, e.g., during a
-+ * delete logical drive opertion. If it is, don't run
-+ * the pending_list.
-+ */
-+ if(atomic_read(&adapter->quiescent) == 0) {
-+ mega_runpendq(adapter);
-+ }
-+ return 0;
-+ }
-+
-+ return busy;
- }
-
-
-@@ -1112,7 +1322,6 @@
- mbox_t *mbox;
- long seg;
- char islogical;
-- int max_ldrv_num;
- int channel = 0;
- int target = 0;
- int ldrv_num = 0; /* logical drive number */
-@@ -1184,24 +1393,6 @@
- }
-
- ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
--
--
-- max_ldrv_num = (adapter->flag & BOARD_40LD) ?
-- MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
--
-- /*
-- * max_ldrv_num increases by 0x80 if some logical drive was
-- * deleted.
-- */
-- if(adapter->read_ldidmap)
-- max_ldrv_num += 0x80;
--
-- if(ldrv_num > max_ldrv_num ) {
-- cmd->result = (DID_BAD_TARGET << 16);
-- cmd->scsi_done(cmd);
-- return NULL;
-- }
--
- }
- else {
- if( cmd->lun > 7) {
-@@ -1671,111 +1862,6 @@
- }
-
-
--static void
--__mega_runpendq(adapter_t *adapter)
--{
-- scb_t *scb;
-- struct list_head *pos, *next;
--
-- /* Issue any pending commands to the card */
-- list_for_each_safe(pos, next, &adapter->pending_list) {
--
-- scb = list_entry(pos, scb_t, list);
--
-- if( !(scb->state & SCB_ISSUED) ) {
--
-- if( issue_scb(adapter, scb) != 0 )
-- return;
-- }
-- }
--
-- return;
--}
--
--
--/**
-- * issue_scb()
-- * @adapter - pointer to our soft state
-- * @scb - scsi control block
-- *
-- * Post a command to the card if the mailbox is available, otherwise return
-- * busy. We also take the scb from the pending list if the mailbox is
-- * available.
-- */
--static int
--issue_scb(adapter_t *adapter, scb_t *scb)
--{
-- volatile mbox64_t *mbox64 = adapter->mbox64;
-- volatile mbox_t *mbox = adapter->mbox;
-- unsigned int i = 0;
--
-- if(unlikely(mbox->busy)) {
-- do {
-- udelay(1);
-- i++;
-- } while( mbox->busy && (i < max_mbox_busy_wait) );
--
-- if(mbox->busy) return -1;
-- }
--
-- /* Copy mailbox data into host structure */
-- memcpy((char *)mbox, (char *)scb->raw_mbox, 16);
--
-- mbox->cmdid = scb->idx; /* Set cmdid */
-- mbox->busy = 1; /* Set busy */
--
--
-- /*
-- * Increment the pending queue counter
-- */
-- atomic_inc(&adapter->pend_cmds);
--
-- switch (mbox->cmd) {
-- case MEGA_MBOXCMD_EXTPTHRU:
-- if( !adapter->has_64bit_addr ) break;
-- // else fall through
-- case MEGA_MBOXCMD_LREAD64:
-- case MEGA_MBOXCMD_LWRITE64:
-- case MEGA_MBOXCMD_PASSTHRU64:
-- mbox64->xfer_segment_lo = mbox->xferaddr;
-- mbox64->xfer_segment_hi = 0;
-- mbox->xferaddr = 0xFFFFFFFF;
-- break;
-- default:
-- mbox64->xfer_segment_lo = 0;
-- mbox64->xfer_segment_hi = 0;
-- }
--
-- /*
-- * post the command
-- */
-- scb->state |= SCB_ISSUED;
--
-- if( likely(adapter->flag & BOARD_MEMMAP) ) {
-- mbox->poll = 0;
-- mbox->ack = 0;
-- WRINDOOR(adapter, adapter->mbox_dma | 0x1);
-- }
-- else {
-- irq_enable(adapter);
-- issue_command(adapter);
-- }
--
-- return 0;
--}
--
--
--/*
-- * Wait until the controller's mailbox is available
-- */
--static inline int
--mega_busywait_mbox (adapter_t *adapter)
--{
-- if (adapter->mbox->busy)
-- return __mega_busywait_mbox(adapter);
-- return 0;
--}
--
- /**
- * issue_scb_block()
- * @adapter - pointer to our soft state
-@@ -1865,77 +1951,47 @@
- // invalidate the completed command id array. After command
- // completion, firmware would write the valid id.
- for (i = 0; i < MAX_FIRMWARE_STATUS; i++) {
-- mbox->completed[i] = 0xFF;
-- }
--
-- return status;
--
--bug_blocked_mailbox:
-- printk(KERN_WARNING "megaraid: Blocked mailbox......!!\n");
-- udelay (1000);
-- return -1;
--}
--
--
--/**
-- * megaraid_iombox_ack_sequence - interrupt ack sequence for IO mapped HBAs
-- * @adapter - controller's soft state
-- *
-- * Interrupt ackrowledgement sequence for IO mapped HBAs
-- */
--static inline void
--megaraid_iombox_ack_sequence(adapter_t *adapter)
--{
-- u8 status;
-- u8 nstatus;
-- u8 completed[MAX_FIRMWARE_STATUS];
-- u8 byte;
-- int i;
--
--
-- /*
-- * loop till F/W has more commands for us to complete.
-- */
-- do {
-- /* Check if a valid interrupt is pending */
-- byte = irq_state(adapter);
-- if( (byte & VALID_INTR_BYTE) == 0 ) {
-- return;
-- }
-- set_irq_state(adapter, byte);
-+ mbox->completed[i] = 0xFF;
-+ }
-
-- while ((nstatus = adapter->mbox->numstatus) == 0xFF) {
-- cpu_relax();
-- }
-- adapter->mbox->numstatus = 0xFF;
-+ return status;
-
-- for (i = 0; i < nstatus; i++) {
-- while ((completed[i] = adapter->mbox->completed[i])
-- == 0xFF) {
-- cpu_relax();
-- }
-+bug_blocked_mailbox:
-+ printk(KERN_WARNING "megaraid: Blocked mailbox......!!\n");
-+ udelay (1000);
-+ return -1;
-+}
-
-- adapter->mbox->completed[i] = 0xFF;
-- }
-
-- // we must read the valid status now
-- if ((status = adapter->mbox->status) == 0xFF) {
-- printk(KERN_WARNING
-- "megaraid critical: status 0xFF from firmware.\n");
-- }
-- adapter->mbox->status = 0xFF;
-+/**
-+ * megaraid_isr_iomapped()
-+ * @irq - irq
-+ * @devp - pointer to our soft state
-+ * @regs - unused
-+ *
-+ * Interrupt service routine for io-mapped controllers.
-+ * Find out if our device is interrupting. If yes, acknowledge the interrupt
-+ * and service the completed commands.
-+ */
-+static void
-+megaraid_isr_iomapped(int irq, void *devp, struct pt_regs *regs)
-+{
-+ adapter_t *adapter = devp;
-+ unsigned long flags;
-
-- /*
-- * decrement the pending queue counter
-- */
-- atomic_sub(nstatus, &adapter->pend_cmds);
-
-- /* Acknowledge interrupt */
-- irq_ack(adapter);
-+ spin_lock_irqsave(adapter->host_lock, flags);
-
-- mega_cmd_done(adapter, completed, nstatus, status);
-+ megaraid_iombox_ack_sequence(adapter);
-
-- } while(1);
-+ /* Loop through any pending requests */
-+ if( atomic_read(&adapter->quiescent ) == 0) {
-+ mega_runpendq(adapter);
-+ }
-+
-+ spin_unlock_irqrestore(adapter->host_lock, flags);
-+
-+ return;
- }
-
-
-@@ -2007,38 +2063,6 @@
-
-
- /**
-- * megaraid_isr_iomapped()
-- * @irq - irq
-- * @devp - pointer to our soft state
-- * @regs - unused
-- *
-- * Interrupt service routine for io-mapped controllers.
-- * Find out if our device is interrupting. If yes, acknowledge the interrupt
-- * and service the completed commands.
-- */
--static void
--megaraid_isr_iomapped(int irq, void *devp, struct pt_regs *regs)
--{
-- adapter_t *adapter = devp;
-- unsigned long flags;
--
--
-- spin_lock_irqsave(adapter->host_lock, flags);
--
-- megaraid_iombox_ack_sequence(adapter);
--
-- /* Loop through any pending requests */
-- if( atomic_read(&adapter->quiescent ) == 0) {
-- mega_runpendq(adapter);
-- }
--
-- spin_unlock_irqrestore(adapter->host_lock, flags);
--
-- return;
--}
--
--
--/**
- * megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
-@@ -2069,7 +2093,6 @@
- return;
- }
-
--
- /**
- * mega_cmd_done()
- * @adapter - pointer to our soft state
-@@ -2381,7 +2404,6 @@
- list_add(&scb->list, &adapter->free_list);
- }
-
--
- static int
- __mega_busywait_mbox (adapter_t *adapter)
- {
-@@ -2412,6 +2434,10 @@
-
- cmd = scb->cmd;
-
-+ /* return 0 elements if no data transfer */
-+ if (!cmd->request_buffer || !cmd->request_bufflen)
-+ return 0;
-+
- /* Scatter-gather not used */
- if( !cmd->use_sg ) {
-
-@@ -2535,7 +2561,6 @@
- enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
- }
-
--
- static inline void
- mega_free_sgl(adapter_t *adapter)
- {
-@@ -2666,6 +2691,13 @@
- pci_free_consistent(adapter->dev, sizeof(mbox64_t),
- (void *)adapter->una_mbox64, adapter->una_mbox64_dma);
-
-+ pci_free_consistent( adapter->dev, sizeof(mega_passthru),
-+ (void*) adapter->int_pthru,
-+ adapter->int_pthru_dma_hndl );
-+
-+ pci_free_consistent( adapter->dev, INT_MEMBLK_SZ, adapter->int_data,
-+ adapter->int_data_dma_hndl );
-+
- hba_count--;
-
- if( hba_count == 0 ) {
-@@ -2694,7 +2726,7 @@
- */
- scsi_unregister(host);
-
--#ifdef LSI_CONFIG_COMPAT
-+#if defined(__x86_64__)
- unregister_ioctl32_conversion(MEGAIOCCMD);
- #endif
-
-@@ -2736,30 +2768,36 @@
- }
-
-
--/**
-- * megaraid_abort - abort the scsi command
-- * @scp - command to be aborted
-- *
-- * Abort a previous SCSI request. Only commands on the pending list can be
-- * aborted. All the commands issued to the F/W must complete.
-- */
- static int
- megaraid_abort(Scsi_Cmnd *scp)
- {
- adapter_t *adapter;
- struct list_head *pos, *next;
- scb_t *scb;
-- long iter;
-- int rval = SUCCESS;
-+
-+ printk("megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
-+ scp->serial_number, scp->cmnd[0], scp->channel,
-+ scp->target, scp->lun);
-
- adapter = (adapter_t *)scp->host->hostdata;
-
-- ASSERT( spin_is_locked(adapter->host_lock) );
-+ /*
-+ * Check if hw_error flag was set in previous RESET call. If it was,
-+ * then FW is hanging and unlikely to function. We can return FAILURE
-+ * from here and expect the RESET handler to be called.
-+ */
-
-- printk("megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
-- scp->serial_number, scp->cmnd[0], scp->channel, scp->target,
-- scp->lun);
-+ if (adapter->hw_error) {
-+ printk("megaraid: hw error, cannot abort\n");
-+ return FAILED;
-+ }
-+
-+ ASSERT( spin_is_locked(adapter->host_lock) );
-
-+ /*
-+ * If cmd is waiting to be issued to FW, ABORT it with SUCEESS. If it
-+ * has already been issued, return FAILURE and expect RESET later.
-+ */
-
- list_for_each_safe( pos, next, &adapter->pending_list ) {
-
-@@ -2769,15 +2807,11 @@
-
- scb->state |= SCB_ABORT;
-
-- /*
-- * Check if this command was never issued. If this is
-- * the case, take it off from the pending list and
-- * complete.
-- */
- if( !(scb->state & SCB_ISSUED) ) {
-
-- printk(KERN_WARNING
-- "megaraid: %ld:%d, driver owner.\n",
-+ /* Not issued to the FW yet; ABORT it */
-+
-+ printk( "megaraid: %ld:%d, driver owner.\n",
- scp->serial_number, scb->idx);
-
- scp->result = (DID_ABORT << 16);
-@@ -2786,67 +2820,31 @@
-
- scp->scsi_done(scp);
-
-- break;
-+ return SUCCESS;
-+ }
-+ else {
-+ /* Issued to the FW; can do nothing */
-+ return FAILED;
- }
- }
- }
-
- /*
-- * By this time, either all commands are completed or aborted by
-- * mid-layer. Do not return until all the commands are actually
-- * completed by the firmware
-+ * cmd is _not_ in our pending_list. Most likely we completed the cmd
- */
-- iter = 0;
-- while( atomic_read(&adapter->pend_cmds) > 0 ) {
-- /*
-- * Perform the ack sequence, since interrupts are not
-- * available right now!
-- */
-- if( adapter->flag & BOARD_MEMMAP ) {
-- megaraid_memmbox_ack_sequence(adapter);
-- }
-- else {
-- megaraid_iombox_ack_sequence(adapter);
-- }
--
-- /*
-- * print a message once every second only
-- */
-- if( !(iter % 1000) ) {
-- printk(
-- "megaraid: Waiting for %d commands to flush: iter:%ld\n",
-- atomic_read(&adapter->pend_cmds), iter);
-- }
--
-- if( iter++ < MBOX_ABORT_SLEEP*1000 ) {
-- mdelay(1);
-- }
-- else {
-- printk(KERN_WARNING
-- "megaraid: critical hardware error!\n");
--
-- rval = FAILED;
--
-- break;
-- }
-- }
--
-- if( rval == SUCCESS ) {
-- printk(KERN_INFO
-- "megaraid: abort sequence successfully completed.\n");
-- }
--
-- return rval;
-+ return SUCCESS;
- }
-
-
- static int
- megaraid_reset(Scsi_Cmnd *cmd)
- {
-- adapter_t *adapter;
-- megacmd_t mc;
-- long iter;
-- int rval = SUCCESS;
-+ DECLARE_WAIT_QUEUE_HEAD(wq);
-+ int i;
-+ scb_t *scb;
-+ adapter_t *adapter;
-+ struct list_head *pos, *next;
-+ int rval;
-
- adapter = (adapter_t *)cmd->host->hostdata;
-
-@@ -2856,31 +2854,54 @@
- cmd->serial_number, cmd->cmnd[0], cmd->channel, cmd->target,
- cmd->lun);
-
-+ /*
-+ * Check if hw_error flag was set in previous RESET call. If it was,
-+ * then we needn't do any handling here. The controller will be marked
-+ * offline soon
-+ */
-
--#if MEGA_HAVE_CLUSTERING
-- mc.cmd = MEGA_CLUSTER_CMD;
-- mc.opcode = MEGA_RESET_RESERVATIONS;
--
-- spin_unlock_irq(adapter->host_lock);
-- if( mega_internal_command(adapter, LOCK_INT, &mc, NULL) != 0 ) {
-- printk(KERN_WARNING
-- "megaraid: reservation reset failed.\n");
-+ if (adapter->hw_error) {
-+ printk("megaraid: hw error, cannot reset\n");
-+ return FAILED;
- }
-- else {
-- printk(KERN_INFO "megaraid: reservation reset.\n");
-+
-+ /*
-+ * Return all the pending cmds to the mid-layer with the cmd result
-+ * DID_RESET. Make sure you don't return the cmds ISSUED to FW.
-+ */
-+ list_for_each_safe( pos, next, &adapter->pending_list ) {
-+
-+ scb = list_entry(pos, scb_t, list);
-+ scb->state |= SCB_RESET;
-+
-+ if( !(scb->state & SCB_ISSUED) ) {
-+
-+ /* Not issued to the FW; return with RESET */
-+ cmd->result = (DID_RESET << 16);
-+
-+ mega_free_scb(adapter, scb);
-+ cmd->scsi_done(cmd);
-+ }
- }
-- spin_lock_irq(adapter->host_lock);
--#endif
-
- /*
-- * Do not return until all the commands are actually completed by the
-- * firmware
-+ * Under exceptional conditions, FW may take up to 3 mins to complete
-+ * processing all pending commands. We'll wait for maximum 3 mins to
-+ * see if all outstanding commands are completed.
- */
-- iter = 0;
-- while( atomic_read(&adapter->pend_cmds) > 0 ) {
-+
-+ if (atomic_read(&adapter->pend_cmds) == 0)
-+ return SUCCESS;
-+
-+ printk("megaraid: %d pending cmds; max wait %d seconds\n",
-+ atomic_read(&adapter->pend_cmds), MBOX_RESET_WAIT );
-+
-+ for(i=0; (i<MBOX_RESET_WAIT)&&(atomic_read(&adapter->pend_cmds)); i++){
-+
-+ ASSERT( spin_is_locked(adapter->host_lock) );
-+
- /*
-- * Perform the ack sequence, since interrupts are not
-- * available right now!
-+ * Perform the ack sequence, since interrupts are unavailable
- */
- if( adapter->flag & BOARD_MEMMAP ) {
- megaraid_memmbox_ack_sequence(adapter);
-@@ -2889,55 +2910,35 @@
- megaraid_iombox_ack_sequence(adapter);
- }
-
-- /*
-- * print a message once every second only
-- */
-- if( !(iter % 1000) ) {
-- printk(
-- "megaraid: Waiting for %d commands to flush: iter:%ld\n",
-- atomic_read(&adapter->pend_cmds), iter);
-- }
-+ spin_unlock(adapter->host_lock);
-
-- if( iter++ < MBOX_RESET_SLEEP*1000 ) {
-- mdelay(1);
-+ /* Print a message once every 5 seconds */
-+ if (!(i % 5)) {
-+ printk("megaraid: pending %d; remaining %d seconds\n",
-+ atomic_read(&adapter->pend_cmds),
-+ MBOX_RESET_WAIT - i);
- }
-- else {
-- printk(KERN_WARNING
-- "megaraid: critical hardware error!\n");
-
-- rval = FAILED;
--
-- break;
-- }
-- }
-+ sleep_on_timeout(&wq, HZ);
-
-- if( rval == SUCCESS ) {
-- printk(KERN_INFO
-- "megaraid: reset sequence successfully completed.\n");
-+ spin_lock(adapter->host_lock);
- }
-
-- return rval;
--}
--
-+ /*
-+ * If after 3 mins there are still outstanding cmds, set the hw_error
-+ * flag so that we can return from subsequent ABORT/RESET handlers
-+ * without any processing
-+ */
-
--/**
-- * mega_allocate_inquiry()
-- * @dma_handle - handle returned for dma address
-- * @pdev - handle to pci device
-- *
-- * allocates memory for inquiry structure
-- */
--static inline caddr_t
--mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
--{
-- return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
--}
-+ rval = SUCCESS;
-+ if (atomic_read(&adapter->pend_cmds)) {
-
-+ adapter->hw_error = 1;
-+ printk("megaraid: critical hardware error!\n" );
-+ rval = FAILED;
-+ }
-
--static inline void
--mega_free_inquiry(caddr_t inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
--{
-- pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
-+ return rval;
- }
-
-
-@@ -3199,6 +3200,26 @@
- return len;
- }
-
-+/**
-+ * mega_allocate_inquiry()
-+ * @dma_handle - handle returned for dma address
-+ * @pdev - handle to pci device
-+ *
-+ * allocates memory for inquiry structure
-+ */
-+static inline caddr_t
-+mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
-+{
-+ return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
-+}
-+
-+
-+static inline void
-+mega_free_inquiry(caddr_t inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
-+{
-+ pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
-+}
-+
-
- /**
- * proc_rebuild_rate()
-@@ -3988,6 +4009,7 @@
- megaraid_reboot_notify (struct notifier_block *this, unsigned long code,
- void *unused)
- {
-+ DECLARE_WAIT_QUEUE_HEAD(wq);
- adapter_t *adapter;
- struct Scsi_Host *host;
- u8 raw_mbox[sizeof(mbox_t)];
-@@ -4040,10 +4062,10 @@
- printk(KERN_INFO "megaraid: cache flush delay: ");
- for( i = 9; i >= 0; i-- ) {
- printk("\b\b\b[%d]", i);
-- mdelay(1000);
-+ sleep_on_timeout(&wq, HZ);
- }
- printk("\b\b\b[done]\n");
-- mdelay(1000);
-+ sleep_on_timeout(&wq, HZ);
-
- return NOTIFY_DONE;
- }
-@@ -4150,17 +4172,27 @@
- }
-
-
--#ifdef LSI_CONFIG_COMPAT
-+#if defined(__x86_64__)
- static int
- megadev_compat_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
- struct file *filep)
- {
- struct inode *inode = filep->f_dentry->d_inode;
-
-- return megadev_ioctl(inode, filep, cmd, arg);
-+ return megadev_ioctl_entry(inode, filep, cmd, arg);
- }
- #endif
-
-+static int
-+megadev_ioctl_entry(struct inode *inode, struct file *filep, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int rval;
-+ down( &megaraid_ioc_mtx );
-+ rval = megadev_ioctl( inode, filep, cmd, arg );
-+ up( &megaraid_ioc_mtx );
-+ return rval;
-+}
-
- /**
- * megadev_ioctl()
-@@ -4184,9 +4216,8 @@
- int rval;
- mega_passthru *upthru; /* user address for passthru */
- mega_passthru *pthru; /* copy user passthru here */
-- dma_addr_t pthru_dma_hndl;
- void *data = NULL; /* data to be transferred */
-- dma_addr_t data_dma_hndl; /* dma handle for data xfer area */
-+ dma_addr_t data_dma_hndl = 0;
- megacmd_t mc;
- megastat_t *ustats;
- int num_ldrv;
-@@ -4302,7 +4333,7 @@
- /*
- * Which adapter
- */
-- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
-+ if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
-
- adapter = hba_soft_state[adapno];
-@@ -4358,13 +4389,7 @@
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
- /* Passthru commands */
-
-- pthru = pci_alloc_consistent(pdev,
-- sizeof(mega_passthru),
-- &pthru_dma_hndl);
--
-- if( pthru == NULL ) {
-- return (-ENOMEM);
-- }
-+ pthru = adapter->int_pthru;
-
- /*
- * The user passthru structure
-@@ -4376,29 +4401,27 @@
- */
- if( copy_from_user(pthru, (char *)upthru,
- sizeof(mega_passthru)) ) {
--
-- pci_free_consistent(pdev,
-- sizeof(mega_passthru), pthru,
-- pthru_dma_hndl);
--
- return (-EFAULT);
- }
-
- /*
-- * Is there a data transfer
-+ * Is there a data transfer; If the data transfer
-+ * length is <= INT_MEMBLK_SZ, usr the buffer
-+ * allocated at the load time. Otherwise, allocate it
-+ * here.
- */
-- if( pthru->dataxferlen ) {
-- data = pci_alloc_consistent(pdev,
-- pthru->dataxferlen,
-- &data_dma_hndl);
--
-- if( data == NULL ) {
-- pci_free_consistent(pdev,
-- sizeof(mega_passthru),
-- pthru,
-- pthru_dma_hndl);
-+ if (pthru->dataxferlen) {
-+ if (pthru->dataxferlen > INT_MEMBLK_SZ) {
-+ data = pci_alloc_consistent (
-+ pdev,
-+ pthru->dataxferlen,
-+ &data_dma_hndl );
-
-- return (-ENOMEM);
-+ if (data == NULL)
-+ return (-ENOMEM);
-+ }
-+ else {
-+ data = adapter->int_data;
- }
-
- /*
-@@ -4406,7 +4429,11 @@
- * address at just allocated memory
- */
- uxferaddr = pthru->dataxferaddr;
-- pthru->dataxferaddr = data_dma_hndl;
-+ if (data_dma_hndl)
-+ pthru->dataxferaddr = data_dma_hndl;
-+ else
-+ pthru->dataxferaddr =
-+ adapter->int_data_dma_hndl;
- }
-
-
-@@ -4421,14 +4448,14 @@
- (char *)((ulong)uxferaddr),
- pthru->dataxferlen) ) {
- rval = (-EFAULT);
-- goto freemem_and_return;
-+ goto freedata_and_return;
- }
- }
-
- memset(&mc, 0, sizeof(megacmd_t));
-
- mc.cmd = MEGA_MBOXCMD_PASSTHRU;
-- mc.xferaddr = (u32)pthru_dma_hndl;
-+ mc.xferaddr = (u32)adapter->int_pthru_dma_hndl;
-
- /*
- * Issue the command
-@@ -4437,7 +4464,7 @@
-
- rval = mega_n_to_m((void *)arg, &mc);
-
-- if( rval ) goto freemem_and_return;
-+ if( rval ) goto freedata_and_return;
-
-
- /*
-@@ -4456,18 +4483,14 @@
- */
- copy_to_user(upthru->reqsensearea,
- pthru->reqsensearea, 14);
--
--freemem_and_return:
-- if( pthru->dataxferlen ) {
-- pci_free_consistent(pdev,
-- pthru->dataxferlen, data,
-- data_dma_hndl);
-+freedata_and_return:
-+ if (data_dma_hndl) {
-+ pci_free_consistent( pdev, pthru->dataxferlen,
-+ data, data_dma_hndl );
- }
-
-- pci_free_consistent(pdev, sizeof(mega_passthru),
-- pthru, pthru_dma_hndl);
--
- return rval;
-+
- }
- else {
- /* DCMD commands */
-@@ -4476,13 +4499,18 @@
- * Is there a data transfer
- */
- if( uioc.xferlen ) {
-- data = pci_alloc_consistent(pdev,
-- uioc.xferlen, &data_dma_hndl);
-+ if (uioc.xferlen > INT_MEMBLK_SZ) {
-+ data = pci_alloc_consistent(
-+ pdev,
-+ uioc.xferlen,
-+ &data_dma_hndl );
-
-- if( data == NULL ) {
-- return (-ENOMEM);
-+ if (data == NULL)
-+ return (-ENOMEM);
-+ }
-+ else {
-+ data = adapter->int_data;
- }
--
- uxferaddr = MBOX(uioc)->xferaddr;
- }
-
-@@ -4497,9 +4525,9 @@
- (char *)((ulong)uxferaddr),
- uioc.xferlen) ) {
-
-- pci_free_consistent(pdev,
-- uioc.xferlen, data,
-- data_dma_hndl);
-+ pci_free_consistent(
-+ pdev, uioc.xferlen,
-+ data, data_dma_hndl );
-
- return (-EFAULT);
- }
-@@ -4507,7 +4535,10 @@
-
- memcpy(&mc, MBOX(uioc), sizeof(megacmd_t));
-
-- mc.xferaddr = (u32)data_dma_hndl;
-+ if (data_dma_hndl )
-+ mc.xferaddr = (u32)data_dma_hndl;
-+ else
-+ mc.xferaddr = (u32)(adapter->int_data_dma_hndl);
-
- /*
- * Issue the command
-@@ -4517,12 +4548,10 @@
- rval = mega_n_to_m((void *)arg, &mc);
-
- if( rval ) {
-- if( uioc.xferlen ) {
-- pci_free_consistent(pdev,
-- uioc.xferlen, data,
-- data_dma_hndl);
-+ if (data_dma_hndl) {
-+ pci_free_consistent( pdev, uioc.xferlen,
-+ data, data_dma_hndl );
- }
--
- return rval;
- }
-
-@@ -4537,10 +4566,9 @@
- }
- }
-
-- if( uioc.xferlen ) {
-- pci_free_consistent(pdev,
-- uioc.xferlen, data,
-- data_dma_hndl);
-+ if (data_dma_hndl) {
-+ pci_free_consistent( pdev, uioc.xferlen,
-+ data, data_dma_hndl );
- }
-
- return rval;
-@@ -4725,19 +4753,22 @@
- else {
- uioc_mimd = (struct uioctl_t *)arg;
-
-- if( put_user(mc->status, (u8 *)&uioc_mimd->mbox[17]) )
-+ if( put_user(mc->status, (u8 *)&uioc_mimd->mbox[17]) ) {
- return (-EFAULT);
-+ }
-
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
- umc = (megacmd_t *)uioc_mimd->mbox;
-- if (copy_from_user(&kmc, umc, sizeof(megacmd_t)))
-+ if (copy_from_user(&kmc, umc, sizeof(megacmd_t))) {
- return -EFAULT;
-+ }
-
- upthru = (mega_passthru *)((ulong)kmc.xferaddr);
-
-- if( put_user(mc->status, (u8 *)&upthru->scsistatus) )
-+ if( put_user(mc->status, (u8 *)&upthru->scsistatus) ){
- return (-EFAULT);
-+ }
- }
- }
-
-@@ -5148,7 +5179,6 @@
- }
-
-
--
- /**
- * mega_reorder_hosts()
- *
-@@ -5363,6 +5393,7 @@
- }
-
-
-+
- /** mega_internal_dev_inquiry()
- * @adapter - pointer to our soft state
- * @ch - channel for this device
-diff -Nur linux-2.4.29/drivers/scsi/megaraid2.h linux-mips/drivers/scsi/megaraid2.h
---- linux-2.4.29/drivers/scsi/megaraid2.h 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/scsi/megaraid2.h 2005-03-26 11:47:33.143212178 +0100
-@@ -6,7 +6,7 @@
-
-
- #define MEGARAID_VERSION \
-- "v2.10.3 (Release Date: Thu Apr 8 16:16:05 EDT 2004)\n"
-+ "v2.10.8.2 (Release Date: Mon Jul 26 12:15:51 EDT 2004)\n"
-
- /*
- * Driver features - change the values to enable or disable features in the
-@@ -82,6 +82,7 @@
- #define LSI_SUBSYS_VID 0x1000
- #define INTEL_SUBSYS_VID 0x8086
- #define FSC_SUBSYS_VID 0x1734
-+#define ACER_SUBSYS_VID 0x1025
-
- #define HBA_SIGNATURE 0x3344
- #define HBA_SIGNATURE_471 0xCCCC
-@@ -978,6 +979,15 @@
- cmds */
-
- int has_cluster; /* cluster support on this HBA */
-+
-+#define INT_MEMBLK_SZ (28*1024)
-+ mega_passthru *int_pthru; /*internal pthru*/
-+ dma_addr_t int_pthru_dma_hndl;
-+ caddr_t int_data; /*internal data*/
-+ dma_addr_t int_data_dma_hndl;
-+
-+ int hw_error;
-+
- }adapter_t;
-
-
-@@ -1085,18 +1095,21 @@
-
- #define MBOX_ABORT_SLEEP 60
- #define MBOX_RESET_SLEEP 30
-+#define MBOX_RESET_WAIT 180
-
- const char *megaraid_info (struct Scsi_Host *);
-
- static int megaraid_detect(Scsi_Host_Template *);
- static void mega_find_card(Scsi_Host_Template *, u16, u16);
- static int mega_query_adapter(adapter_t *);
--static int issue_scb(adapter_t *, scb_t *);
-+static inline int issue_scb(adapter_t *, scb_t *);
- static int mega_setup_mailbox(adapter_t *);
-
- static int megaraid_queue (Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
- static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
-+static inline scb_t *mega_allocate_scb(adapter_t *, Scsi_Cmnd *);
- static void __mega_runpendq(adapter_t *);
-+static inline void mega_runpendq(adapter_t *);
- static int issue_scb_block(adapter_t *, u_char *);
-
- static void megaraid_isr_memmapped(int, void *, struct pt_regs *);
-@@ -1113,6 +1126,7 @@
-
- static int mega_build_sglist (adapter_t *adapter, scb_t *scb,
- u32 *buffer, u32 *length);
-+static inline int mega_busywait_mbox (adapter_t *);
- static int __mega_busywait_mbox (adapter_t *);
- static void mega_cmd_done(adapter_t *, u8 [], int, int);
- static inline void mega_free_sgl (adapter_t *adapter);
-@@ -1123,15 +1137,13 @@
- unsigned long, void *);
- static int megadev_open (struct inode *, struct file *);
-
--#if defined(CONFIG_COMPAT) || defined( __x86_64__) || defined(IA32_EMULATION)
--#define LSI_CONFIG_COMPAT
--#endif
--
--#ifdef LSI_CONFIG_COMPAT
-+#if defined(__x86_64__)
- static int megadev_compat_ioctl(unsigned int, unsigned int, unsigned long,
- struct file *);
- #endif
-
-+static int megadev_ioctl_entry (struct inode *, struct file *, unsigned int,
-+ unsigned long);
- static int megadev_ioctl (struct inode *, struct file *, unsigned int,
- unsigned long);
- static int mega_m_to_n(void *, nitioctl_t *);
-@@ -1164,6 +1176,8 @@
-
- static int mega_adapinq(adapter_t *, dma_addr_t);
- static int mega_internal_dev_inquiry(adapter_t *, u8, u8, dma_addr_t);
-+static inline caddr_t mega_allocate_inquiry(dma_addr_t *, struct pci_dev *);
-+static inline void mega_free_inquiry(caddr_t, dma_addr_t, struct pci_dev *);
- static int mega_print_inquiry(char *, char *);
- #endif
-
-@@ -1174,6 +1188,7 @@
- scb_t *, Scsi_Cmnd *, int, int);
- static void mega_enum_raid_scsi(adapter_t *);
- static void mega_get_boot_drv(adapter_t *);
-+static inline int mega_get_ldrv_num(adapter_t *, Scsi_Cmnd *, int);
- static int mega_support_random_del(adapter_t *);
- static int mega_del_logdrv(adapter_t *, int);
- static int mega_do_del_logdrv(adapter_t *, int);
-diff -Nur linux-2.4.29/drivers/scsi/NCR53C9x.h linux-mips/drivers/scsi/NCR53C9x.h
---- linux-2.4.29/drivers/scsi/NCR53C9x.h 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/scsi/NCR53C9x.h 2003-12-15 19:19:51.000000000 +0100
-@@ -144,12 +144,7 @@
-
- #ifndef MULTIPLE_PAD_SIZES
-
--#ifdef CONFIG_CPU_HAS_WB
--#include <asm/wbflush.h>
--#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0)
--#else
--#define esp_write(__reg, __val) ((__reg) = (__val))
--#endif
-+#define esp_write(__reg, __val) do{(__reg) = (__val); iob();} while(0)
- #define esp_read(__reg) (__reg)
-
- struct ESP_regs {
-diff -Nur linux-2.4.29/drivers/scsi/osst.c linux-mips/drivers/scsi/osst.c
---- linux-2.4.29/drivers/scsi/osst.c 2004-08-08 01:26:05.000000000 +0200
-+++ linux-mips/drivers/scsi/osst.c 2005-03-26 11:47:33.149211193 +0100
-@@ -5505,7 +5505,6 @@
- read: osst_read,
- write: osst_write,
- ioctl: osst_ioctl,
-- llseek: no_llseek,
- open: os_scsi_tape_open,
- flush: os_scsi_tape_flush,
- release: os_scsi_tape_close,
-diff -Nur linux-2.4.29/drivers/scsi/sata_nv.c linux-mips/drivers/scsi/sata_nv.c
---- linux-2.4.29/drivers/scsi/sata_nv.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_nv.c 2005-03-26 11:47:33.156210045 +0100
-@@ -20,6 +20,10 @@
- * If you do not delete the provisions above, a recipient may use your
- * version of this file under either the OSL or the GPL.
- *
-+ * 0.06
-+ * - Added generic SATA support by using a pci_device_id that filters on
-+ * the IDE storage class code.
-+ *
- * 0.03
- * - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
- * mmio_base, which is only set for the CK804/MCP04 case.
-@@ -44,7 +48,7 @@
- #include <linux/libata.h>
-
- #define DRV_NAME "sata_nv"
--#define DRV_VERSION "0.5"
-+#define DRV_VERSION "0.6"
-
- #define NV_PORTS 2
- #define NV_PIO_MASK 0x1f
-@@ -95,7 +99,8 @@
- #define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04
-
- static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
--irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
-+static irqreturn_t nv_interrupt (int irq, void *dev_instance,
-+ struct pt_regs *regs);
- static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
- static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
- static void nv_host_stop (struct ata_host_set *host_set);
-@@ -108,6 +113,7 @@
-
- enum nv_host_type
- {
-+ GENERIC,
- NFORCE2,
- NFORCE3,
- CK804
-@@ -128,6 +134,9 @@
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
- { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
-+ { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
-+ PCI_ANY_ID, PCI_ANY_ID,
-+ PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
- { 0, } /* terminate list */
- };
-
-@@ -136,7 +145,6 @@
- struct nv_host_desc
- {
- enum nv_host_type host_type;
-- unsigned long host_flags;
- void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
- void (*disable_hotplug)(struct ata_host_set *host_set);
- void (*check_hotplug)(struct ata_host_set *host_set);
-@@ -144,21 +152,24 @@
- };
- static struct nv_host_desc nv_device_tbl[] = {
- {
-+ .host_type = GENERIC,
-+ .enable_hotplug = NULL,
-+ .disable_hotplug= NULL,
-+ .check_hotplug = NULL,
-+ },
-+ {
- .host_type = NFORCE2,
-- .host_flags = 0x00000000,
- .enable_hotplug = nv_enable_hotplug,
- .disable_hotplug= nv_disable_hotplug,
- .check_hotplug = nv_check_hotplug,
- },
- {
- .host_type = NFORCE3,
-- .host_flags = 0x00000000,
- .enable_hotplug = nv_enable_hotplug,
- .disable_hotplug= nv_disable_hotplug,
- .check_hotplug = nv_check_hotplug,
- },
- { .host_type = CK804,
-- .host_flags = NV_HOST_FLAGS_SCR_MMIO,
- .enable_hotplug = nv_enable_hotplug_ck804,
- .disable_hotplug= nv_disable_hotplug_ck804,
- .check_hotplug = nv_check_hotplug_ck804,
-@@ -168,6 +179,7 @@
- struct nv_host
- {
- struct nv_host_desc *host_desc;
-+ unsigned long host_flags;
- };
-
- static struct pci_driver nv_pci_driver = {
-@@ -207,6 +219,8 @@
- .phy_reset = sata_phy_reset,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
-@@ -245,7 +259,8 @@
- MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
- MODULE_VERSION(DRV_VERSION);
-
--irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
-+static irqreturn_t nv_interrupt (int irq, void *dev_instance,
-+ struct pt_regs *regs)
- {
- struct ata_host_set *host_set = dev_instance;
- struct nv_host *host = host_set->private_data;
-@@ -285,8 +300,8 @@
- if (sc_reg > SCR_CONTROL)
- return 0xffffffffU;
-
-- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
-- return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
-+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
-+ return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
- else
- return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
- }
-@@ -299,8 +314,8 @@
- if (sc_reg > SCR_CONTROL)
- return;
-
-- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
-- writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
-+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
-+ writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
- else
- outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
- }
-@@ -322,7 +337,16 @@
- struct nv_host *host;
- struct ata_port_info *ppi;
- struct ata_probe_ent *probe_ent;
-+ int pci_dev_busy = 0;
- int rc;
-+ u32 bar;
-+
-+ // Make sure this is a SATA controller by counting the number of bars
-+ // (NVIDIA SATA controllers will always have six bars). Otherwise,
-+ // it's an IDE controller and we ignore it.
-+ for (bar=0; bar<6; bar++)
-+ if (pci_resource_start(pdev, bar) == 0)
-+ return -ENODEV;
-
- if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
-@@ -332,8 +356,10 @@
- goto err_out;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out_disable;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -350,11 +376,15 @@
- if (!host)
- goto err_out_free_ent;
-
-+ memset(host, 0, sizeof(struct nv_host));
- host->host_desc = &nv_device_tbl[ent->driver_data];
-
- probe_ent->private_data = host;
-
-- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
-+ if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
-+ host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
-+
-+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
- unsigned long base;
-
- probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
-@@ -395,7 +425,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out_disable:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- err_out:
- return rc;
- }
-diff -Nur linux-2.4.29/drivers/scsi/sata_promise.c linux-mips/drivers/scsi/sata_promise.c
---- linux-2.4.29/drivers/scsi/sata_promise.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_promise.c 2005-03-26 11:47:33.159209552 +0100
-@@ -42,8 +42,6 @@
- #define DRV_NAME "sata_promise"
- #define DRV_VERSION "1.01"
-
--#define msleep libata_msleep /* 2.4-specific */
--
- enum {
- PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
- PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
-@@ -158,10 +156,18 @@
- board_2037x },
- { PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_2037x },
-+ { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_2037x },
-+ { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_2037x },
-+
- { PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_20319 },
- { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_20319 },
-+ { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_20319 },
-+
- { } /* terminate list */
- };
-
-@@ -408,9 +414,11 @@
- return IRQ_NONE;
- }
-
-- spin_lock(&host_set->lock);
-+ spin_lock(&host_set->lock);
-+
-+ writel(mask, mmio_base + PDC_INT_SEQMASK);
-
-- for (i = 0; i < host_set->n_ports; i++) {
-+ for (i = 0; i < host_set->n_ports; i++) {
- VPRINTK("port %u\n", i);
- ap = host_set->ports[i];
- tmp = mask & (1 << (i + 1));
-@@ -548,6 +556,7 @@
- unsigned long base;
- void *mmio_base;
- unsigned int board_idx = (unsigned int) ent->driver_data;
-+ int pci_dev_busy = 0;
- int rc;
-
- if (!printed_version++)
-@@ -562,8 +571,10 @@
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -637,7 +648,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/sata_qstor.c linux-mips/drivers/scsi/sata_qstor.c
---- linux-2.4.29/drivers/scsi/sata_qstor.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_qstor.c 2005-03-18 13:13:28.000000000 +0100
-@@ -0,0 +1,717 @@
-+/*
-+ * sata_qstor.c - Pacific Digital Corporation QStor SATA
-+ *
-+ * Maintained by: Mark Lord <mlord@pobox.com>
-+ *
-+ * Copyright 2005 Pacific Digital Corporation.
-+ * (OSL/GPL code release authorized by Jalil Fadavi).
-+ *
-+ * The contents of this file are subject to the Open
-+ * Software License version 1.1 that can be found at
-+ * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
-+ * by reference.
-+ *
-+ * Alternatively, the contents of this file may be used under the terms
-+ * of the GNU General Public License version 2 (the "GPL") as distributed
-+ * in the kernel source COPYING file, in which case the provisions of
-+ * the GPL are applicable instead of the above. If you wish to allow
-+ * the use of your version of this file only under the terms of the
-+ * GPL and not to allow others to use your version of this file under
-+ * the OSL, indicate your decision by deleting the provisions above and
-+ * replace them with the notice and other provisions required by the GPL.
-+ * If you do not delete the provisions above, a recipient may use your
-+ * version of this file under either the OSL or the GPL.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/blkdev.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include "scsi.h"
-+#include <scsi/scsi_host.h>
-+#include <asm/io.h>
-+#include <linux/libata.h>
-+
-+#define DRV_NAME "sata_qstor"
-+#define DRV_VERSION "0.04"
-+
-+enum {
-+ QS_PORTS = 4,
-+ QS_MAX_PRD = LIBATA_MAX_PRD,
-+ QS_CPB_ORDER = 6,
-+ QS_CPB_BYTES = (1 << QS_CPB_ORDER),
-+ QS_PRD_BYTES = QS_MAX_PRD * 16,
-+ QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
-+
-+ QS_DMA_BOUNDARY = ~0UL,
-+
-+ /* global register offsets */
-+ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
-+ QS_HID_HPHY = 0x0004, /* host physical interface info */
-+ QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */
-+ QS_HST_SFF = 0x0100, /* host status fifo offset */
-+ QS_HVS_SERD3 = 0x0393, /* PHY enable offset */
-+
-+ /* global control bits */
-+ QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */
-+ QS_CNFG3_GSRST = 0x01, /* global chip reset */
-+ QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/
-+
-+ /* per-channel register offsets */
-+ QS_CCF_CPBA = 0x0710, /* chan CPB base address */
-+ QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */
-+ QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */
-+ QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */
-+ QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */
-+ QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */
-+ QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */
-+ QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */
-+ QS_CCT_CFF = 0x0a00, /* chan command fifo offset */
-+
-+ /* channel control bits */
-+ QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */
-+ QS_CTR0_CLER = (1 << 2), /* clear channel errors */
-+ QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */
-+ QS_CTR1_RCHN = (1 << 4), /* reset channel logic */
-+ QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */
-+
-+ /* pkt sub-field headers */
-+ QS_HCB_HDR = 0x01, /* Host Control Block header */
-+ QS_DCB_HDR = 0x02, /* Device Control Block header */
-+
-+ /* pkt HCB flag bits */
-+ QS_HF_DIRO = (1 << 0), /* data DIRection Out */
-+ QS_HF_DAT = (1 << 3), /* DATa pkt */
-+ QS_HF_IEN = (1 << 4), /* Interrupt ENable */
-+ QS_HF_VLD = (1 << 5), /* VaLiD pkt */
-+
-+ /* pkt DCB flag bits */
-+ QS_DF_PORD = (1 << 2), /* Pio OR Dma */
-+ QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */
-+
-+ /* PCI device IDs */
-+ board_2068_idx = 0, /* QStor 4-port SATA/RAID */
-+};
-+
-+typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
-+
-+struct qs_port_priv {
-+ u8 *pkt;
-+ dma_addr_t pkt_dma;
-+ qs_state_t state;
-+};
-+
-+static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
-+static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-+static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-+static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs);
-+static int qs_port_start(struct ata_port *ap);
-+static void qs_host_stop(struct ata_host_set *host_set);
-+static void qs_port_stop(struct ata_port *ap);
-+static void qs_phy_reset(struct ata_port *ap);
-+static void qs_qc_prep(struct ata_queued_cmd *qc);
-+static int qs_qc_issue(struct ata_queued_cmd *qc);
-+static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
-+static void qs_bmdma_stop(struct ata_port *ap);
-+static u8 qs_bmdma_status(struct ata_port *ap);
-+static void qs_irq_clear(struct ata_port *ap);
-+static void qs_eng_timeout(struct ata_port *ap);
-+
-+static Scsi_Host_Template qs_ata_sht = {
-+ .module = THIS_MODULE,
-+ .name = DRV_NAME,
-+ .detect = ata_scsi_detect,
-+ .release = ata_scsi_release,
-+ .ioctl = ata_scsi_ioctl,
-+ .queuecommand = ata_scsi_queuecmd,
-+ .eh_strategy_handler = ata_scsi_error,
-+ .can_queue = ATA_DEF_QUEUE,
-+ .this_id = ATA_SHT_THIS_ID,
-+ .sg_tablesize = QS_MAX_PRD,
-+ .max_sectors = ATA_MAX_SECTORS,
-+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
-+ .use_new_eh_code = ATA_SHT_NEW_EH_CODE,
-+ .emulated = ATA_SHT_EMULATED,
-+ //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
-+ .use_clustering = ENABLE_CLUSTERING,
-+ .proc_name = DRV_NAME,
-+ .bios_param = ata_std_bios_param,
-+};
-+
-+static struct ata_port_operations qs_ata_ops = {
-+ .port_disable = ata_port_disable,
-+ .tf_load = ata_tf_load,
-+ .tf_read = ata_tf_read,
-+ .check_status = ata_check_status,
-+ .check_atapi_dma = qs_check_atapi_dma,
-+ .exec_command = ata_exec_command,
-+ .dev_select = ata_std_dev_select,
-+ .phy_reset = qs_phy_reset,
-+ .qc_prep = qs_qc_prep,
-+ .qc_issue = qs_qc_issue,
-+ .eng_timeout = qs_eng_timeout,
-+ .irq_handler = qs_intr,
-+ .irq_clear = qs_irq_clear,
-+ .scr_read = qs_scr_read,
-+ .scr_write = qs_scr_write,
-+ .port_start = qs_port_start,
-+ .port_stop = qs_port_stop,
-+ .host_stop = qs_host_stop,
-+ .bmdma_stop = qs_bmdma_stop,
-+ .bmdma_status = qs_bmdma_status,
-+};
-+
-+static struct ata_port_info qs_port_info[] = {
-+ /* board_2068_idx */
-+ {
-+ .sht = &qs_ata_sht,
-+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-+ ATA_FLAG_SATA_RESET |
-+ //FIXME ATA_FLAG_SRST |
-+ ATA_FLAG_MMIO,
-+ .pio_mask = 0x10, /* pio4 */
-+ .udma_mask = 0x7f, /* udma0-6 */
-+ .port_ops = &qs_ata_ops,
-+ },
-+};
-+
-+static struct pci_device_id qs_ata_pci_tbl[] = {
-+ { PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ board_2068_idx },
-+
-+ { } /* terminate list */
-+};
-+
-+static struct pci_driver qs_ata_pci_driver = {
-+ .name = DRV_NAME,
-+ .id_table = qs_ata_pci_tbl,
-+ .probe = qs_ata_init_one,
-+ .remove = ata_pci_remove_one,
-+};
-+
-+static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
-+{
-+ return 1; /* ATAPI DMA not supported */
-+}
-+
-+static void qs_bmdma_stop(struct ata_port *ap)
-+{
-+ /* nothing */
-+}
-+
-+static u8 qs_bmdma_status(struct ata_port *ap)
-+{
-+ return 0;
-+}
-+
-+static void qs_irq_clear(struct ata_port *ap)
-+{
-+ /* nothing */
-+}
-+
-+static inline void qs_enter_reg_mode(struct ata_port *ap)
-+{
-+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
-+
-+ writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
-+ readb(chan + QS_CCT_CTR0); /* flush */
-+}
-+
-+static inline void qs_reset_channel_logic(struct ata_port *ap)
-+{
-+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
-+
-+ writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1);
-+ readb(chan + QS_CCT_CTR0); /* flush */
-+ qs_enter_reg_mode(ap);
-+}
-+
-+static void qs_phy_reset(struct ata_port *ap)
-+{
-+ struct qs_port_priv *pp = ap->private_data;
-+
-+ pp->state = qs_state_idle;
-+ qs_reset_channel_logic(ap);
-+ sata_phy_reset(ap);
-+}
-+
-+static void qs_eng_timeout(struct ata_port *ap)
-+{
-+ struct qs_port_priv *pp = ap->private_data;
-+
-+ if (pp->state != qs_state_idle) /* healthy paranoia */
-+ pp->state = qs_state_mmio;
-+ qs_reset_channel_logic(ap);
-+ ata_eng_timeout(ap);
-+}
-+
-+static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg)
-+{
-+ if (sc_reg > SCR_CONTROL)
-+ return ~0U;
-+ return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
-+}
-+
-+static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
-+{
-+ if (sc_reg > SCR_CONTROL)
-+ return;
-+ writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
-+}
-+
-+static void qs_fill_sg(struct ata_queued_cmd *qc)
-+{
-+ struct scatterlist *sg = qc->sg;
-+ struct ata_port *ap = qc->ap;
-+ struct qs_port_priv *pp = ap->private_data;
-+ unsigned int nelem;
-+ u8 *prd = pp->pkt + QS_CPB_BYTES;
-+
-+ assert(sg != NULL);
-+ assert(qc->n_elem > 0);
-+
-+ for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) {
-+ u64 addr;
-+ u32 len;
-+
-+ addr = sg_dma_address(sg);
-+ *(__le64 *)prd = cpu_to_le64(addr);
-+ prd += sizeof(u64);
-+
-+ len = sg_dma_len(sg);
-+ *(__le32 *)prd = cpu_to_le32(len);
-+ prd += sizeof(u64);
-+
-+ VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
-+ (unsigned long long)addr, len);
-+ }
-+}
-+
-+static void qs_qc_prep(struct ata_queued_cmd *qc)
-+{
-+ struct qs_port_priv *pp = qc->ap->private_data;
-+ u8 dflags = QS_DF_PORD, *buf = pp->pkt;
-+ u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD;
-+ u64 addr;
-+
-+ VPRINTK("ENTER\n");
-+
-+ qs_enter_reg_mode(qc->ap);
-+ if (qc->tf.protocol != ATA_PROT_DMA) {
-+ ata_qc_prep(qc);
-+ return;
-+ }
-+
-+ qs_fill_sg(qc);
-+
-+ if ((qc->tf.flags & ATA_TFLAG_WRITE))
-+ hflags |= QS_HF_DIRO;
-+ if ((qc->tf.flags & ATA_TFLAG_LBA48))
-+ dflags |= QS_DF_ELBA;
-+
-+ /* host control block (HCB) */
-+ buf[ 0] = QS_HCB_HDR;
-+ buf[ 1] = hflags;
-+ *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
-+ *(__le32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
-+ addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
-+ *(__le64 *)(&buf[16]) = cpu_to_le64(addr);
-+
-+ /* device control block (DCB) */
-+ buf[24] = QS_DCB_HDR;
-+ buf[28] = dflags;
-+
-+ /* frame information structure (FIS) */
-+ ata_tf_to_fis(&qc->tf, &buf[32], 0);
-+}
-+
-+static inline void qs_packet_start(struct ata_queued_cmd *qc)
-+{
-+ struct ata_port *ap = qc->ap;
-+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
-+
-+ VPRINTK("ENTER, ap %p\n", ap);
-+
-+ writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0);
-+ wmb(); /* flush PRDs and pkt to memory */
-+ writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF);
-+ readl(chan + QS_CCT_CFF); /* flush */
-+}
-+
-+static int qs_qc_issue(struct ata_queued_cmd *qc)
-+{
-+ struct qs_port_priv *pp = qc->ap->private_data;
-+
-+ switch (qc->tf.protocol) {
-+ case ATA_PROT_DMA:
-+
-+ pp->state = qs_state_pkt;
-+ qs_packet_start(qc);
-+ return 0;
-+
-+ case ATA_PROT_ATAPI_DMA:
-+ BUG();
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ pp->state = qs_state_mmio;
-+ return ata_qc_issue_prot(qc);
-+}
-+
-+static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set)
-+{
-+ unsigned int handled = 0;
-+ u8 sFFE;
-+ u8 __iomem *mmio_base = host_set->mmio_base;
-+
-+ do {
-+ u32 sff0 = readl(mmio_base + QS_HST_SFF);
-+ u32 sff1 = readl(mmio_base + QS_HST_SFF + 4);
-+ u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */
-+ sFFE = sff1 >> 31; /* empty flag */
-+
-+ if (sEVLD) {
-+ u8 sDST = sff0 >> 16; /* dev status */
-+ u8 sHST = sff1 & 0x3f; /* host status */
-+ unsigned int port_no = (sff1 >> 8) & 0x03;
-+ struct ata_port *ap = host_set->ports[port_no];
-+
-+ DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
-+ sff1, sff0, port_no, sHST, sDST);
-+ handled = 1;
-+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
-+ struct ata_queued_cmd *qc;
-+ struct qs_port_priv *pp = ap->private_data;
-+ if (!pp || pp->state != qs_state_pkt)
-+ continue;
-+ qc = ata_qc_from_tag(ap, ap->active_tag);
-+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
-+ switch (sHST) {
-+ case 0: /* sucessful CPB */
-+ case 3: /* device error */
-+ pp->state = qs_state_idle;
-+ qs_enter_reg_mode(qc->ap);
-+ ata_qc_complete(qc, sDST);
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ } while (!sFFE);
-+ return handled;
-+}
-+
-+static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set)
-+{
-+ unsigned int handled = 0, port_no;
-+
-+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
-+ struct ata_port *ap;
-+ ap = host_set->ports[port_no];
-+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
-+ struct ata_queued_cmd *qc;
-+ struct qs_port_priv *pp = ap->private_data;
-+ if (!pp || pp->state != qs_state_mmio)
-+ continue;
-+ qc = ata_qc_from_tag(ap, ap->active_tag);
-+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
-+
-+ /* check main status, clearing INTRQ */
-+ u8 status = ata_chk_status(ap);
-+ if ((status & ATA_BUSY))
-+ continue;
-+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
-+ ap->id, qc->tf.protocol, status);
-+
-+ /* complete taskfile transaction */
-+ pp->state = qs_state_idle;
-+ ata_qc_complete(qc, status);
-+ handled = 1;
-+ }
-+ }
-+ }
-+ return handled;
-+}
-+
-+static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs)
-+{
-+ struct ata_host_set *host_set = dev_instance;
-+ unsigned int handled = 0;
-+
-+ VPRINTK("ENTER\n");
-+
-+ spin_lock(&host_set->lock);
-+ handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set);
-+ spin_unlock(&host_set->lock);
-+
-+ VPRINTK("EXIT\n");
-+
-+ return IRQ_RETVAL(handled);
-+}
-+
-+static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base)
-+{
-+ port->cmd_addr =
-+ port->data_addr = base + 0x400;
-+ port->error_addr =
-+ port->feature_addr = base + 0x408; /* hob_feature = 0x409 */
-+ port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */
-+ port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */
-+ port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */
-+ port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */
-+ port->device_addr = base + 0x430;
-+ port->status_addr =
-+ port->command_addr = base + 0x438;
-+ port->altstatus_addr =
-+ port->ctl_addr = base + 0x440;
-+ port->scr_addr = base + 0xc00;
-+}
-+
-+static int qs_port_start(struct ata_port *ap)
-+{
-+ struct device *dev = ap->host_set->dev;
-+ struct qs_port_priv *pp;
-+ void __iomem *mmio_base = ap->host_set->mmio_base;
-+ void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
-+ u64 addr;
-+ int rc;
-+
-+ rc = ata_port_start(ap);
-+ if (rc)
-+ return rc;
-+ qs_enter_reg_mode(ap);
-+ pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
-+ if (!pp) {
-+ rc = -ENOMEM;
-+ goto err_out;
-+ }
-+ pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma,
-+ GFP_KERNEL);
-+ if (!pp->pkt) {
-+ rc = -ENOMEM;
-+ goto err_out_kfree;
-+ }
-+ memset(pp->pkt, 0, QS_PKT_BYTES);
-+ ap->private_data = pp;
-+
-+ addr = (u64)pp->pkt_dma;
-+ writel((u32) addr, chan + QS_CCF_CPBA);
-+ writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
-+ return 0;
-+
-+err_out_kfree:
-+ kfree(pp);
-+err_out:
-+ ata_port_stop(ap);
-+ return rc;
-+}
-+
-+static void qs_port_stop(struct ata_port *ap)
-+{
-+ struct device *dev = ap->host_set->dev;
-+ struct qs_port_priv *pp = ap->private_data;
-+
-+ if (pp != NULL) {
-+ ap->private_data = NULL;
-+ if (pp->pkt != NULL)
-+ dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt,
-+ pp->pkt_dma);
-+ kfree(pp);
-+ }
-+ ata_port_stop(ap);
-+}
-+
-+static void qs_host_stop(struct ata_host_set *host_set)
-+{
-+ void __iomem *mmio_base = host_set->mmio_base;
-+
-+ writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
-+ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
-+}
-+
-+static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
-+{
-+ void __iomem *mmio_base = pe->mmio_base;
-+ unsigned int port_no;
-+
-+ writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
-+ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
-+
-+ /* reset each channel in turn */
-+ for (port_no = 0; port_no < pe->n_ports; ++port_no) {
-+ u8 __iomem *chan = mmio_base + (port_no * 0x4000);
-+ writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
-+ writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
-+ readb(chan + QS_CCT_CTR0); /* flush */
-+ }
-+ writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
-+
-+ for (port_no = 0; port_no < pe->n_ports; ++port_no) {
-+ u8 __iomem *chan = mmio_base + (port_no * 0x4000);
-+ /* set FIFO depths to same settings as Windows driver */
-+ writew(32, chan + QS_CFC_HUFT);
-+ writew(32, chan + QS_CFC_HDFT);
-+ writew(10, chan + QS_CFC_DUFT);
-+ writew( 8, chan + QS_CFC_DDFT);
-+ /* set CPB size in bytes, as a power of two */
-+ writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP);
-+ }
-+ writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */
-+}
-+
-+/*
-+ * The QStor understands 64-bit buses, and uses 64-bit fields
-+ * for DMA pointers regardless of bus width. We just have to
-+ * make sure our DMA masks are set appropriately for whatever
-+ * bridge lies between us and the QStor, and then the DMA mapping
-+ * code will ensure we only ever "see" appropriate buffer addresses.
-+ * If we're 32-bit limited somewhere, then our 64-bit fields will
-+ * just end up with zeros in the upper 32-bits, without any special
-+ * logic required outside of this routine (below).
-+ */
-+static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
-+{
-+ u32 bus_info = readl(mmio_base + QS_HID_HPHY);
-+ int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
-+
-+ if (have_64bit_bus &&
-+ !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
-+ /* do nothing */
-+ } else {
-+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-+ if (rc) {
-+ printk(KERN_ERR DRV_NAME
-+ "(%s): 32-bit DMA enable failed\n",
-+ pci_name(pdev));
-+ return rc;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int qs_ata_init_one(struct pci_dev *pdev,
-+ const struct pci_device_id *ent)
-+{
-+ static int printed_version;
-+ struct ata_probe_ent *probe_ent = NULL;
-+ void __iomem *mmio_base;
-+ unsigned int board_idx = (unsigned int) ent->driver_data;
-+ int rc, port_no;
-+
-+ if (!printed_version++)
-+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
-+
-+ rc = pci_enable_device(pdev);
-+ if (rc)
-+ return rc;
-+
-+ rc = pci_request_regions(pdev, DRV_NAME);
-+ if (rc)
-+ goto err_out;
-+
-+ if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) {
-+ rc = -ENODEV;
-+ goto err_out_regions;
-+ }
-+
-+ mmio_base = ioremap(pci_resource_start(pdev, 4),
-+ pci_resource_len(pdev, 4));
-+ if (mmio_base == NULL) {
-+ rc = -ENOMEM;
-+ goto err_out_regions;
-+ }
-+
-+ rc = qs_set_dma_masks(pdev, mmio_base);
-+ if (rc)
-+ goto err_out_iounmap;
-+
-+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
-+ if (probe_ent == NULL) {
-+ rc = -ENOMEM;
-+ goto err_out_iounmap;
-+ }
-+
-+ memset(probe_ent, 0, sizeof(*probe_ent));
-+ probe_ent->dev = pci_dev_to_dev(pdev);
-+ INIT_LIST_HEAD(&probe_ent->node);
-+
-+ probe_ent->sht = qs_port_info[board_idx].sht;
-+ probe_ent->host_flags = qs_port_info[board_idx].host_flags;
-+ probe_ent->pio_mask = qs_port_info[board_idx].pio_mask;
-+ probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask;
-+ probe_ent->udma_mask = qs_port_info[board_idx].udma_mask;
-+ probe_ent->port_ops = qs_port_info[board_idx].port_ops;
-+
-+ probe_ent->irq = pdev->irq;
-+ probe_ent->irq_flags = SA_SHIRQ;
-+ probe_ent->mmio_base = mmio_base;
-+ probe_ent->n_ports = QS_PORTS;
-+
-+ for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
-+ unsigned long chan = (unsigned long)mmio_base +
-+ (port_no * 0x4000);
-+ qs_ata_setup_port(&probe_ent->port[port_no], chan);
-+ }
-+
-+ pci_set_master(pdev);
-+
-+ /* initialize adapter */
-+ qs_host_init(board_idx, probe_ent);
-+
-+ ata_add_to_probe_list(probe_ent);
-+ return 0;
-+
-+err_out_iounmap:
-+ iounmap(mmio_base);
-+err_out_regions:
-+ pci_release_regions(pdev);
-+err_out:
-+ pci_disable_device(pdev);
-+ return rc;
-+}
-+
-+static int __init qs_ata_init(void)
-+{
-+ int rc;
-+
-+ rc = pci_module_init(&qs_ata_pci_driver);
-+ if (rc)
-+ return rc;
-+
-+ rc = scsi_register_module(MODULE_SCSI_HA, &qs_ata_sht);
-+ if (rc) {
-+ rc = -ENODEV;
-+ goto err_out;
-+ }
-+
-+ return 0;
-+
-+err_out:
-+ pci_unregister_driver(&qs_ata_pci_driver);
-+ return rc;
-+}
-+
-+static void __exit qs_ata_exit(void)
-+{
-+ scsi_unregister_module(MODULE_SCSI_HA, &qs_ata_sht);
-+ pci_unregister_driver(&qs_ata_pci_driver);
-+}
-+
-+MODULE_AUTHOR("Mark Lord");
-+MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl);
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(qs_ata_init);
-+module_exit(qs_ata_exit);
-diff -Nur linux-2.4.29/drivers/scsi/sata_sil.c linux-mips/drivers/scsi/sata_sil.c
---- linux-2.4.29/drivers/scsi/sata_sil.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_sil.c 2005-03-26 11:47:33.241196096 +0100
-@@ -71,12 +71,14 @@
- { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
-+ { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
-+ { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
- { } /* terminate list */
- };
-
-
- /* TODO firmware versions should be added - eric */
--struct sil_drivelist {
-+static const struct sil_drivelist {
- const char * product;
- unsigned int quirk;
- } sil_blacklist [] = {
-@@ -84,10 +86,12 @@
- { "ST330013AS", SIL_QUIRK_MOD15WRITE },
- { "ST340017AS", SIL_QUIRK_MOD15WRITE },
- { "ST360015AS", SIL_QUIRK_MOD15WRITE },
-+ { "ST380013AS", SIL_QUIRK_MOD15WRITE },
- { "ST380023AS", SIL_QUIRK_MOD15WRITE },
- { "ST3120023AS", SIL_QUIRK_MOD15WRITE },
- { "ST3160023AS", SIL_QUIRK_MOD15WRITE },
- { "ST3120026AS", SIL_QUIRK_MOD15WRITE },
-+ { "ST3200822AS", SIL_QUIRK_MOD15WRITE },
- { "ST340014ASL", SIL_QUIRK_MOD15WRITE },
- { "ST360014ASL", SIL_QUIRK_MOD15WRITE },
- { "ST380011ASL", SIL_QUIRK_MOD15WRITE },
-@@ -136,6 +140,8 @@
- .post_set_mode = sil_post_set_mode,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
-@@ -333,6 +339,7 @@
- void *mmio_base;
- int rc;
- unsigned int i;
-+ int pci_dev_busy = 0;
- u32 tmp, irq_mask;
-
- if (!printed_version++)
-@@ -347,8 +354,10 @@
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -430,7 +439,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/sata_sis.c linux-mips/drivers/scsi/sata_sis.c
---- linux-2.4.29/drivers/scsi/sata_sis.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_sis.c 2005-03-26 11:47:33.244195604 +0100
-@@ -103,6 +103,8 @@
- .phy_reset = sata_phy_reset,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
-@@ -201,14 +203,17 @@
- int rc;
- u32 genctl;
- struct ata_port_info *ppi;
-+ int pci_dev_busy = 0;
-
- rc = pci_enable_device(pdev);
- if (rc)
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -255,7 +260,8 @@
- pci_release_regions(pdev);
-
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
-
- }
-diff -Nur linux-2.4.29/drivers/scsi/sata_svw.c linux-mips/drivers/scsi/sata_svw.c
---- linux-2.4.29/drivers/scsi/sata_svw.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_svw.c 2005-03-26 11:47:33.246195276 +0100
-@@ -156,7 +156,7 @@
- * spin_lock_irqsave(host_set lock)
- */
-
--void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
-+static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
- {
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
-@@ -186,7 +186,7 @@
- * spin_lock_irqsave(host_set lock)
- */
-
--void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
-+static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
- {
- struct ata_port *ap = qc->ap;
- void *mmio = (void *) ap->ioaddr.bmdma_addr;
-@@ -302,6 +302,8 @@
- .phy_reset = sata_phy_reset,
- .bmdma_setup = k2_bmdma_setup_mmio,
- .bmdma_start = k2_bmdma_start_mmio,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
-@@ -339,6 +341,7 @@
- struct ata_probe_ent *probe_ent = NULL;
- unsigned long base;
- void *mmio_base;
-+ int pci_dev_busy = 0;
- int rc;
-
- if (!printed_version++)
-@@ -360,8 +363,10 @@
-
- /* Request PCI regions */
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -429,7 +434,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/sata_sx4.c linux-mips/drivers/scsi/sata_sx4.c
---- linux-2.4.29/drivers/scsi/sata_sx4.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_sx4.c 2005-03-26 11:47:33.249194784 +0100
-@@ -1191,8 +1191,7 @@
- error = 0;
- break;
- }
-- set_current_state(TASK_UNINTERRUPTIBLE);
-- schedule_timeout((i * 100) * HZ / 1000 + 1);
-+ msleep(i*100);
- }
- return error;
- }
-@@ -1225,8 +1224,7 @@
- readl(mmio + PDC_TIME_CONTROL);
-
- /* Wait 3 seconds */
-- set_current_state(TASK_UNINTERRUPTIBLE);
-- schedule_timeout(3 * HZ);
-+ msleep(3000);
-
- /*
- When timer is enabled, counter is decreased every internal
-@@ -1369,6 +1367,7 @@
- void *mmio_base, *dimm_mmio = NULL;
- struct pdc_host_priv *hpriv = NULL;
- unsigned int board_idx = (unsigned int) ent->driver_data;
-+ int pci_dev_busy = 0;
- int rc;
-
- if (!printed_version++)
-@@ -1383,8 +1382,10 @@
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -1469,7 +1470,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/sata_uli.c linux-mips/drivers/scsi/sata_uli.c
---- linux-2.4.29/drivers/scsi/sata_uli.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_uli.c 2005-03-26 11:47:33.252194291 +0100
-@@ -98,6 +98,8 @@
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
-@@ -186,14 +188,17 @@
- struct ata_port_info *ppi;
- int rc;
- unsigned int board_idx = (unsigned int) ent->driver_data;
-+ int pci_dev_busy = 0;
-
- rc = pci_enable_device(pdev);
- if (rc)
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
-@@ -256,7 +261,8 @@
- pci_release_regions(pdev);
-
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
-
- }
-diff -Nur linux-2.4.29/drivers/scsi/sata_via.c linux-mips/drivers/scsi/sata_via.c
---- linux-2.4.29/drivers/scsi/sata_via.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_via.c 2005-03-26 11:47:33.268191666 +0100
-@@ -24,6 +24,11 @@
- If you do not delete the provisions above, a recipient may use your
- version of this file under either the OSL or the GPL.
-
-+ ----------------------------------------------------------------------
-+
-+ To-do list:
-+ * VT6421 PATA support
-+
- */
-
- #include <linux/kernel.h>
-@@ -38,11 +43,14 @@
- #include <asm/io.h>
-
- #define DRV_NAME "sata_via"
--#define DRV_VERSION "1.0"
-+#define DRV_VERSION "1.1"
-
--enum {
-- via_sata = 0,
-+enum board_ids_enum {
-+ vt6420,
-+ vt6421,
-+};
-
-+enum {
- SATA_CHAN_ENAB = 0x40, /* SATA channel enable */
- SATA_INT_GATE = 0x41, /* SATA interrupt gating */
- SATA_NATIVE_MODE = 0x42, /* Native mode enable */
-@@ -50,10 +58,8 @@
-
- PORT0 = (1 << 1),
- PORT1 = (1 << 0),
--
-- ENAB_ALL = PORT0 | PORT1,
--
-- INT_GATE_ALL = PORT0 | PORT1,
-+ ALL_PORTS = PORT0 | PORT1,
-+ N_PORTS = 2,
-
- NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
-
-@@ -66,7 +72,8 @@
- static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-
- static struct pci_device_id svia_pci_tbl[] = {
-- { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, via_sata },
-+ { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
-+ { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 },
-
- { } /* terminate list */
- };
-@@ -111,6 +118,9 @@
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
-+
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
-@@ -159,18 +169,132 @@
- 8, 4, 8, 4, 16, 256
- };
-
-+static const unsigned int vt6421_bar_sizes[] = {
-+ 16, 16, 16, 16, 32, 128
-+};
-+
- static unsigned long svia_scr_addr(unsigned long addr, unsigned int port)
- {
- return addr + (port * 128);
- }
-
-+static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port)
-+{
-+ return addr + (port * 64);
-+}
-+
-+static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
-+ struct pci_dev *pdev,
-+ unsigned int port)
-+{
-+ unsigned long reg_addr = pci_resource_start(pdev, port);
-+ unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8);
-+ unsigned long scr_addr;
-+
-+ probe_ent->port[port].cmd_addr = reg_addr;
-+ probe_ent->port[port].altstatus_addr =
-+ probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS;
-+ probe_ent->port[port].bmdma_addr = bmdma_addr;
-+
-+ scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port);
-+ probe_ent->port[port].scr_addr = scr_addr;
-+
-+ ata_std_ports(&probe_ent->port[port]);
-+}
-+
-+static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
-+{
-+ struct ata_probe_ent *probe_ent;
-+ struct ata_port_info *ppi = &svia_port_info;
-+
-+ probe_ent = ata_pci_init_native_mode(pdev, &ppi);
-+ if (!probe_ent)
-+ return NULL;
-+
-+ probe_ent->port[0].scr_addr =
-+ svia_scr_addr(pci_resource_start(pdev, 5), 0);
-+ probe_ent->port[1].scr_addr =
-+ svia_scr_addr(pci_resource_start(pdev, 5), 1);
-+
-+ return probe_ent;
-+}
-+
-+static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
-+{
-+ struct ata_probe_ent *probe_ent;
-+ unsigned int i;
-+
-+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
-+ if (!probe_ent)
-+ return NULL;
-+
-+ memset(probe_ent, 0, sizeof(*probe_ent));
-+ probe_ent->dev = pci_dev_to_dev(pdev);
-+ INIT_LIST_HEAD(&probe_ent->node);
-+
-+ probe_ent->sht = &svia_sht;
-+ probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
-+ ATA_FLAG_NO_LEGACY;
-+ probe_ent->port_ops = &svia_sata_ops;
-+ probe_ent->n_ports = N_PORTS;
-+ probe_ent->irq = pdev->irq;
-+ probe_ent->irq_flags = SA_SHIRQ;
-+ probe_ent->pio_mask = 0x1f;
-+ probe_ent->mwdma_mask = 0x07;
-+ probe_ent->udma_mask = 0x7f;
-+
-+ for (i = 0; i < N_PORTS; i++)
-+ vt6421_init_addrs(probe_ent, pdev, i);
-+
-+ return probe_ent;
-+}
-+
-+static void svia_configure(struct pci_dev *pdev)
-+{
-+ u8 tmp8;
-+
-+ pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
-+ printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
-+ pci_name(pdev),
-+ (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
-+
-+ /* make sure SATA channels are enabled */
-+ pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
-+ if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-+ printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
-+ pci_name(pdev), (int) tmp8);
-+ tmp8 |= ALL_PORTS;
-+ pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
-+ }
-+
-+ /* make sure interrupts for each channel sent to us */
-+ pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
-+ if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-+ printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
-+ pci_name(pdev), (int) tmp8);
-+ tmp8 |= ALL_PORTS;
-+ pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
-+ }
-+
-+ /* make sure native mode is enabled */
-+ pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
-+ if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
-+ printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
-+ pci_name(pdev), (int) tmp8);
-+ tmp8 |= NATIVE_MODE_ALL;
-+ pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
-+ }
-+}
-+
- static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
- {
- static int printed_version;
- unsigned int i;
- int rc;
-- struct ata_port_info *ppi;
- struct ata_probe_ent *probe_ent;
-+ int board_id = (int) ent->driver_data;
-+ const int *bar_sizes;
-+ int pci_dev_busy = 0;
- u8 tmp8;
-
- if (!printed_version++)
-@@ -181,20 +305,28 @@
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
-- pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
-- if (tmp8 & SATA_2DEV) {
-- printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
-- pci_name(pdev), (int) tmp8);
-- rc = -EIO;
-- goto err_out_regions;
-+ if (board_id == vt6420) {
-+ pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
-+ if (tmp8 & SATA_2DEV) {
-+ printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
-+ pci_name(pdev), (int) tmp8);
-+ rc = -EIO;
-+ goto err_out_regions;
-+ }
-+
-+ bar_sizes = &svia_bar_sizes[0];
-+ } else {
-+ bar_sizes = &vt6421_bar_sizes[0];
- }
-
- for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
- if ((pci_resource_start(pdev, i) == 0) ||
-- (pci_resource_len(pdev, i) < svia_bar_sizes[i])) {
-+ (pci_resource_len(pdev, i) < bar_sizes[i])) {
- printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
- pci_name(pdev), i,
- pci_resource_start(pdev, i),
-@@ -207,8 +339,11 @@
- if (rc)
- goto err_out_regions;
-
-- ppi = &svia_port_info;
-- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
-+ if (board_id == vt6420)
-+ probe_ent = vt6420_init_probe_ent(pdev);
-+ else
-+ probe_ent = vt6421_init_probe_ent(pdev);
-+
- if (!probe_ent) {
- printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
- pci_name(pdev));
-@@ -216,42 +351,7 @@
- goto err_out_regions;
- }
-
-- probe_ent->port[0].scr_addr =
-- svia_scr_addr(pci_resource_start(pdev, 5), 0);
-- probe_ent->port[1].scr_addr =
-- svia_scr_addr(pci_resource_start(pdev, 5), 1);
--
-- pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
-- printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
-- pci_name(pdev),
-- (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
--
-- /* make sure SATA channels are enabled */
-- pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
-- if ((tmp8 & ENAB_ALL) != ENAB_ALL) {
-- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
-- pci_name(pdev), (int) tmp8);
-- tmp8 |= ENAB_ALL;
-- pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
-- }
--
-- /* make sure interrupts for each channel sent to us */
-- pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
-- if ((tmp8 & INT_GATE_ALL) != INT_GATE_ALL) {
-- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
-- pci_name(pdev), (int) tmp8);
-- tmp8 |= INT_GATE_ALL;
-- pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
-- }
--
-- /* make sure native mode is enabled */
-- pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
-- if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
-- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
-- pci_name(pdev), (int) tmp8);
-- tmp8 |= NATIVE_MODE_ALL;
-- pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
-- }
-+ svia_configure(pdev);
-
- pci_set_master(pdev);
-
-@@ -262,7 +362,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/sata_vsc.c linux-mips/drivers/scsi/sata_vsc.c
---- linux-2.4.29/drivers/scsi/sata_vsc.c 2005-01-19 15:10:03.000000000 +0100
-+++ linux-mips/drivers/scsi/sata_vsc.c 2005-03-26 11:47:33.270191338 +0100
-@@ -155,7 +155,8 @@
- *
- * Read the interrupt register and process for the devices that have them pending.
- */
--irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
-+static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
-+ struct pt_regs *regs)
- {
- struct ata_host_set *host_set = dev_instance;
- unsigned int i;
-@@ -218,6 +219,8 @@
- .phy_reset = sata_phy_reset,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
-+ .bmdma_stop = ata_bmdma_stop,
-+ .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
-@@ -256,6 +259,7 @@
- static int printed_version;
- struct ata_probe_ent *probe_ent = NULL;
- unsigned long base;
-+ int pci_dev_busy = 0;
- void *mmio_base;
- int rc;
-
-@@ -275,13 +279,15 @@
- }
-
- rc = pci_request_regions(pdev, DRV_NAME);
-- if (rc)
-+ if (rc) {
-+ pci_dev_busy = 1;
- goto err_out;
-+ }
-
- /*
- * Use 32 bit DMA mask, because 64 bit address support is poor.
- */
-- rc = pci_set_dma_mask(pdev, 0xFFFFFFFFULL);
-+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (rc)
- goto err_out_regions;
-
-@@ -348,7 +354,8 @@
- err_out_regions:
- pci_release_regions(pdev);
- err_out:
-- pci_disable_device(pdev);
-+ if (!pci_dev_busy)
-+ pci_disable_device(pdev);
- return rc;
- }
-
-diff -Nur linux-2.4.29/drivers/scsi/sd.c linux-mips/drivers/scsi/sd.c
---- linux-2.4.29/drivers/scsi/sd.c 2003-08-25 13:44:42.000000000 +0200
-+++ linux-mips/drivers/scsi/sd.c 2005-03-26 11:47:33.274190681 +0100
-@@ -1220,7 +1220,7 @@
- goto cleanup_gendisks_part;
- memset(sd_gendisks[i].part, 0, (SCSI_DISKS_PER_MAJOR << 4) * sizeof(struct hd_struct));
- sd_gendisks[i].sizes = sd_sizes + (i * SCSI_DISKS_PER_MAJOR << 4);
-- sd_gendisks[i].nr_real = 0;
-+ sd_gendisks[i].nr_real = SCSI_DISKS_PER_MAJOR;
- sd_gendisks[i].real_devices =
- (void *) (rscsi_disks + i * SCSI_DISKS_PER_MAJOR);
- }
-@@ -1333,7 +1333,6 @@
- rscsi_disks[i].device = SDp;
- rscsi_disks[i].has_part_table = 0;
- sd_template.nr_dev++;
-- SD_GENDISK(i).nr_real++;
- devnum = i % SCSI_DISKS_PER_MAJOR;
- SD_GENDISK(i).de_arr[devnum] = SDp->de;
- if (SDp->removable)
-@@ -1447,7 +1446,6 @@
- SDp->attached--;
- sd_template.dev_noticed--;
- sd_template.nr_dev--;
-- SD_GENDISK(i).nr_real--;
- return;
- }
- return;
-diff -Nur linux-2.4.29/drivers/scsi/st.c linux-mips/drivers/scsi/st.c
---- linux-2.4.29/drivers/scsi/st.c 2005-01-19 15:10:04.000000000 +0100
-+++ linux-mips/drivers/scsi/st.c 2005-03-26 11:47:33.279189861 +0100
-@@ -1641,7 +1641,7 @@
- if (STps->drv_block >= 0)
- STps->drv_block += 1;
- (STp->buffer)->buffer_bytes = 0;
-- return (-EIO);
-+ return (-ENOMEM);
- }
- (STp->buffer)->buffer_bytes = bytes - transfer;
- } else {
-@@ -3778,7 +3778,6 @@
- read: st_read,
- write: st_write,
- ioctl: st_ioctl,
-- llseek: no_llseek,
- open: st_open,
- flush: st_flush,
- release: st_release,
-diff -Nur linux-2.4.29/drivers/scsi/sym53c8xx.c linux-mips/drivers/scsi/sym53c8xx.c
---- linux-2.4.29/drivers/scsi/sym53c8xx.c 2004-04-14 15:05:32.000000000 +0200
-+++ linux-mips/drivers/scsi/sym53c8xx.c 2005-03-26 11:47:34.823936333 +0100
-@@ -13182,7 +13182,7 @@
- ** descriptors.
- */
- if (chip && (chip->features & FE_DAC)) {
-- if (pci_set_dma_mask(pdev, (u64) 0xffffffffff))
-+ if (pci_set_dma_mask(pdev, (u64) 0xffffffffffULL))
- chip->features &= ~FE_DAC_IN_USE;
- else
- chip->features |= FE_DAC_IN_USE;
-diff -Nur linux-2.4.29/drivers/sound/au1550_i2s.c linux-mips/drivers/sound/au1550_i2s.c
---- linux-2.4.29/drivers/sound/au1550_i2s.c 2005-01-19 15:10:04.000000000 +0100
-+++ linux-mips/drivers/sound/au1550_i2s.c 2005-03-26 11:47:35.065896621 +0100
-@@ -41,6 +41,7 @@
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-+
- #include <linux/version.h>
- #include <linux/module.h>
- #include <linux/string.h>
-@@ -62,7 +63,45 @@
- #include <asm/uaccess.h>
- #include <asm/hardirq.h>
- #include <asm/au1000.h>
-+
-+#if defined(CONFIG_SOC_AU1550)
- #include <asm/pb1550.h>
-+#endif
-+
-+#if defined(CONFIG_MIPS_PB1200)
-+#define WM8731
-+#define WM_MODE_USB
-+#include <asm/pb1200.h>
-+#endif
-+
-+#if defined(CONFIG_MIPS_FICMMP)
-+#define WM8721
-+#define WM_MODE_NORMAL
-+#include <asm/ficmmp.h>
-+#endif
-+
-+
-+#define WM_VOLUME_MIN 47
-+#define WM_VOLUME_SCALE 80
-+
-+#if defined(WM8731)
-+ /* OSS interface to the wm i2s.. */
-+ #define CODEC_NAME "Wolfson WM8731 I2S"
-+ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM | SOUND_MASK_LINE)
-+ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK | SOUND_MASK_MIC)
-+ #define WM_I2S_RECORD_MASK (SOUND_MASK_MIC | SOUND_MASK_LINE1 | SOUND_MASK_LINE)
-+#elif defined(WM8721)
-+ #define CODEC_NAME "Wolfson WM8721 I2S"
-+ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM)
-+ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK)
-+ #define WM_I2S_RECORD_MASK (0)
-+#endif
-+
-+
-+#define supported_mixer(FOO) ((FOO >= 0) && \
-+ (FOO < SOUND_MIXER_NRDEVICES) && \
-+ WM_I2S_SUPPORTED_MASK & (1<<FOO) )
-+
- #include <asm/au1xxx_psc.h>
- #include <asm/au1xxx_dbdma.h>
-
-@@ -98,13 +137,51 @@
- * 0 = no VRA, 1 = use VRA if codec supports it
- * The framework is here, but we currently force no VRA.
- */
-+#if defined(CONFIG_MIPS_PB1200) | defined(CONFIG_MIPS_PB1550)
- static int vra = 0;
-+#elif defined(CONFIG_MIPS_FICMMP)
-+static int vra = 1;
-+#endif
-+
-+#define WM_REG_L_HEADPHONE_OUT 0x02
-+#define WM_REG_R_HEADPHONE_OUT 0x03
-+#define WM_REG_ANALOGUE_AUDIO_PATH_CTRL 0x04
-+#define WM_REG_DIGITAL_AUDIO_PATH_CTRL 0x05
-+#define WM_REG_POWER_DOWN_CTRL 0x06
-+#define WM_REG_DIGITAL_AUDIO_IF 0x07
-+#define WM_REG_SAMPLING_CONTROL 0x08
-+#define WM_REG_ACTIVE_CTRL 0x09
-+#define WM_REG_RESET 0x0F
-+#define WM_SC_SR_96000 (0x7<<2)
-+#define WM_SC_SR_88200 (0xF<<2)
-+#define WM_SC_SR_48000 (0x0<<2)
-+#define WM_SC_SR_44100 (0x8<<2)
-+#define WM_SC_SR_32000 (0x6<<2)
-+#define WM_SC_SR_8018 (0x9<<2)
-+#define WM_SC_SR_8000 (0x1<<2)
-+#define WM_SC_MODE_USB 1
-+#define WM_SC_MODE_NORMAL 0
-+#define WM_SC_BOSR_250FS (0<<1)
-+#define WM_SC_BOSR_272FS (1<<1)
-+#define WM_SC_BOSR_256FS (0<<1)
-+#define WM_SC_BOSR_128FS (0<<1)
-+#define WM_SC_BOSR_384FS (1<<1)
-+#define WM_SC_BOSR_192FS (1<<1)
-+
-+#define WS_64FS 31
-+#define WS_96FS 47
-+#define WS_128FS 63
-+#define WS_192FS 95
-+
-+#define MIN_Q_COUNT 2
-+
- MODULE_PARM(vra, "i");
- MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it");
-
- static struct au1550_state {
- /* soundcore stuff */
- int dev_audio;
-+ int dev_mixer;
-
- spinlock_t lock;
- struct semaphore open_sem;
-@@ -114,6 +191,11 @@
- int no_vra;
- volatile psc_i2s_t *psc_addr;
-
-+ int level_line;
-+ int level_mic;
-+ int level_left;
-+ int level_right;
-+
- struct dmabuf {
- u32 dmanr;
- unsigned sample_rate;
-@@ -195,60 +277,224 @@
- }
- }
-
--/* Just a place holder. The Wolfson codec is a write only device,
-- * so we would have to keep a local copy of the data.
-- */
--#if 0
--static u8
--rdcodec(u8 addr)
--{
-- return 0 /* data */;
--}
--#endif
--
--
- static void
--wrcodec(u8 ctlreg, u8 val)
-+wrcodec(u8 ctlreg, u16 val)
- {
- int rcnt;
- extern int pb1550_wm_codec_write(u8 addr, u8 reg, u8 val);
--
- /* The codec is a write only device, with a 16-bit control/data
- * word. Although it is written as two bytes on the I2C, the
- * format is actually 7 bits of register and 9 bits of data.
- * The ls bit of the first byte is the ms bit of the data.
- */
- rcnt = 0;
-- while ((pb1550_wm_codec_write((0x36 >> 1), ctlreg, val) != 1)
-- && (rcnt < 50)) {
-+ while ((pb1550_wm_codec_write((0x36 >> 1),
-+ (ctlreg << 1) | ((val >> 8) & 0x01),
-+ (u8) (val & 0x00FF)) != 1) &&
-+ (rcnt < 50)) {
- rcnt++;
--#if 0
-- printk("Codec write retry %02x %02x\n", ctlreg, val);
--#endif
- }
-+
-+ au1550_delay(10);
-+}
-+
-+static int
-+au1550_open_mixdev(struct inode *inode, struct file *file)
-+{
-+ file->private_data = &au1550_state;
-+ return 0;
-+}
-+
-+static int
-+au1550_release_mixdev(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static int wm_i2s_read_mixer(struct au1550_state *s, int oss_channel)
-+{
-+ int ret = 0;
-+
-+ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
-+ /* nice stereo mixers .. */
-+
-+ ret = s->level_left | (s->level_right << 8);
-+ } else if (oss_channel == SOUND_MIXER_MIC) {
-+ ret = 0;
-+ /* TODO: Implement read mixer for input/output codecs */
-+ }
-+
-+ return ret;
- }
-
-+static void wm_i2s_write_mixer(struct au1550_state *s, int oss_channel, unsigned int left, unsigned int right)
-+{
-+ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
-+ /* stereo mixers */
-+ s->level_left = left;
-+ s->level_right = right;
-+
-+ right = (right * WM_VOLUME_SCALE) / 100;
-+ left = (left * WM_VOLUME_SCALE) / 100;
-+ if (right > WM_VOLUME_SCALE)
-+ right = WM_VOLUME_SCALE;
-+ if (left > WM_VOLUME_SCALE)
-+ left = WM_VOLUME_SCALE;
-+
-+ right += WM_VOLUME_MIN;
-+ left += WM_VOLUME_MIN;
-+
-+ wrcodec(WM_REG_L_HEADPHONE_OUT, left);
-+ wrcodec(WM_REG_R_HEADPHONE_OUT, right);
-+
-+ }else if (oss_channel == SOUND_MIXER_MIC) {
-+ /* TODO: implement write mixer for input/output codecs */
-+ }
-+}
-+
-+/* a thin wrapper for write_mixer */
-+static void wm_i2s_set_mixer(struct au1550_state *s, unsigned int oss_mixer, unsigned int val )
-+{
-+ unsigned int left,right;
-+
-+ /* cleanse input a little */
-+ right = ((val >> 8) & 0xff) ;
-+ left = (val & 0xff) ;
-+
-+ if (right > 100) right = 100;
-+ if (left > 100) left = 100;
-+
-+ wm_i2s_write_mixer(s, oss_mixer, left, right);
-+}
-+
-+static int
-+au1550_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ struct au1550_state *s = (struct au1550_state *)file->private_data;
-+
-+ int i, val = 0;
-+
-+ if (cmd == SOUND_MIXER_INFO) {
-+ mixer_info info;
-+ strncpy(info.id, CODEC_NAME, sizeof(info.id));
-+ strncpy(info.name, CODEC_NAME, sizeof(info.name));
-+ info.modify_counter = 0;
-+ if (copy_to_user((void *)arg, &info, sizeof(info)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ if (cmd == SOUND_OLD_MIXER_INFO) {
-+ _old_mixer_info info;
-+ strncpy(info.id, CODEC_NAME, sizeof(info.id));
-+ strncpy(info.name, CODEC_NAME, sizeof(info.name));
-+ if (copy_to_user((void *)arg, &info, sizeof(info)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+
-+ if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
-+ return -EINVAL;
-+
-+ if (cmd == OSS_GETVERSION)
-+ return put_user(SOUND_VERSION, (int *)arg);
-+
-+ if (_SIOC_DIR(cmd) == _SIOC_READ) {
-+ switch (_IOC_NR(cmd)) {
-+ case SOUND_MIXER_RECSRC: /* give them the current record src */
-+ val = 0;
-+ /*
-+ if (!codec->recmask_io) {
-+ val = 0;
-+ } else {
-+ val = codec->recmask_io(codec, 1, 0);
-+ }*/
-+ break;
-+
-+ case SOUND_MIXER_DEVMASK: /* give them the supported mixers */
-+ val = WM_I2S_SUPPORTED_MASK;
-+ break;
-+
-+ case SOUND_MIXER_RECMASK:
-+ /* Arg contains a bit for each supported recording
-+ * source */
-+ val = WM_I2S_RECORD_MASK;
-+ break;
-+
-+ case SOUND_MIXER_STEREODEVS:
-+ /* Mixer channels supporting stereo */
-+ val = WM_I2S_STEREO_MASK;
-+ break;
-+
-+ case SOUND_MIXER_CAPS:
-+ val = SOUND_CAP_EXCL_INPUT;
-+ break;
-+
-+ default: /* read a specific mixer */
-+ i = _IOC_NR(cmd);
-+
-+ if (!supported_mixer(i))
-+ return -EINVAL;
-+
-+ val = wm_i2s_read_mixer(s, i);
-+ break;
-+ }
-+ return put_user(val, (int *)arg);
-+ }
-+
-+ if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) {
-+ if (get_user(val, (int *)arg))
-+ return -EFAULT;
-+
-+ switch (_IOC_NR(cmd)) {
-+ case SOUND_MIXER_RECSRC:
-+ /* Arg contains a bit for each recording source */
-+ if (!WM_I2S_RECORD_MASK)
-+ return -EINVAL;
-+ if (!val)
-+ return 0;
-+ if (!(val &= WM_I2S_RECORD_MASK))
-+ return -EINVAL;
-+
-+ return 0;
-+ default: /* write a specific mixer */
-+ i = _IOC_NR(cmd);
-+
-+ if (!supported_mixer(i))
-+ return -EINVAL;
-+
-+ wm_i2s_set_mixer(s, i, val);
-+
-+ return 0;
-+ }
-+}
-+ return -EINVAL;
-+}
-+
-+static loff_t
-+au1550_llseek(struct file *file, loff_t offset, int origin)
-+{
-+ return -ESPIPE;
-+}
-+
-+static /*const */ struct file_operations au1550_mixer_fops = {
-+ owner:THIS_MODULE,
-+ llseek:au1550_llseek,
-+ ioctl:au1550_ioctl_mixdev,
-+ open:au1550_open_mixdev,
-+ release:au1550_release_mixdev,
-+};
-+
- void
--codec_init(void)
-+codec_init(struct au1550_state *s)
- {
-- wrcodec(0x1e, 0x00); /* Reset */
-- au1550_delay(200);
-- wrcodec(0x0c, 0x00); /* Power up everything */
-- au1550_delay(10);
-- wrcodec(0x12, 0x00); /* Deactivate codec */
-- au1550_delay(10);
-- wrcodec(0x08, 0x10); /* Select DAC outputs to line out */
-- au1550_delay(10);
-- wrcodec(0x0a, 0x00); /* Disable output mute */
-- au1550_delay(10);
-- wrcodec(0x05, 0x70); /* lower output volume on headphone */
-- au1550_delay(10);
-- wrcodec(0x0e, 0x02); /* Set slave, 16-bit, I2S modes */
-- au1550_delay(10);
-- wrcodec(0x10, 0x01); /* 12MHz (USB), 250fs */
-- au1550_delay(10);
-- wrcodec(0x12, 0x01); /* Activate codec */
-- au1550_delay(10);
-+ wrcodec(WM_REG_RESET, 0x00); /* Reset */
-+ wrcodec(WM_REG_POWER_DOWN_CTRL, 0x00); /* Power up everything */
-+ wrcodec(WM_REG_ACTIVE_CTRL, 0x00); /* Deactivate codec */
-+ wrcodec(WM_REG_ANALOGUE_AUDIO_PATH_CTRL, 0x10); /* Select DAC outputs to line out */
-+ wrcodec(WM_REG_DIGITAL_AUDIO_PATH_CTRL, 0x00); /* Disable output mute */
-+ wm_i2s_write_mixer(s, SOUND_MIXER_PCM, 74, 74);
-+ wrcodec(WM_REG_DIGITAL_AUDIO_IF, 0x02); /* Set slave, 16-bit, I2S modes */
-+ wrcodec(WM_REG_ACTIVE_CTRL, 0x01); /* Activate codec */
- }
-
- /* stop the ADC before calling */
-@@ -256,27 +502,16 @@
- set_adc_rate(struct au1550_state *s, unsigned rate)
- {
- struct dmabuf *adc = &s->dma_adc;
-- struct dmabuf *dac = &s->dma_dac;
-
-- if (s->no_vra) {
-- /* calc SRC factor
-- */
-+ #if defined(WM_MODE_USB)
- adc->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
- adc->sample_rate = SAMP_RATE / adc->src_factor;
- return;
-- }
-+ #else
-+ //TODO: Need code for normal mode
-+ #endif
-
- adc->src_factor = 1;
--
--
--#if 0
-- rate = rate > SAMP_RATE ? SAMP_RATE : rate;
--
-- wrcodec(0, 0); /* I don't yet know what to write here if we vra */
--
-- adc->sample_rate = rate;
-- dac->sample_rate = rate;
--#endif
- }
-
- /* stop the DAC before calling */
-@@ -284,26 +519,89 @@
- set_dac_rate(struct au1550_state *s, unsigned rate)
- {
- struct dmabuf *dac = &s->dma_dac;
-- struct dmabuf *adc = &s->dma_adc;
-
-- if (s->no_vra) {
-- /* calc SRC factor
-- */
-- dac->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
-- dac->sample_rate = SAMP_RATE / dac->src_factor;
-- return;
-+ u16 sr, ws, div, bosr, mode;
-+ volatile psc_i2s_t* ip = (volatile psc_i2s_t *)I2S_PSC_BASE;
-+ u32 cfg;
-+
-+ #if defined(CONFIG_MIPS_FICMMP)
-+ rate = ficmmp_set_i2s_sample_rate(rate);
-+ #endif
-+
-+ switch(rate)
-+ {
-+ case 96000:
-+ sr = WM_SC_SR_96000;
-+ ws = WS_64FS;
-+ div = PSC_I2SCFG_DIV2;
-+ break;
-+ case 88200:
-+ sr = WM_SC_SR_88200;
-+ ws = WS_64FS;
-+ div = PSC_I2SCFG_DIV2;
-+ break;
-+ case 44100:
-+ sr = WM_SC_SR_44100;
-+ ws = WS_128FS;
-+ div = PSC_I2SCFG_DIV2;
-+ break;
-+ case 48000:
-+ sr = WM_SC_SR_48000;
-+ ws = WS_128FS;
-+ div = PSC_I2SCFG_DIV2;
-+ break;
-+ case 32000:
-+ sr = WM_SC_SR_32000;
-+ ws = WS_96FS;
-+ div = PSC_I2SCFG_DIV4;
-+ break;
-+ case 8018:
-+ sr = WM_SC_SR_8018;
-+ ws = WS_128FS;
-+ div = PSC_I2SCFG_DIV2;
-+ break;
-+ case 8000:
-+ default:
-+ sr = WM_SC_SR_8000;
-+ ws = WS_96FS;
-+ div = PSC_I2SCFG_DIV16;
-+ break;
- }
-
-+ #if defined(WM_MODE_USB)
-+ mode = WM_SC_MODE_USB;
-+ #else
-+ mode = WM_SC_MODE_NORMAL;
-+ #endif
-+
-+ bosr = 0;
-+
- dac->src_factor = 1;
-+ dac->sample_rate = rate;
-
--#if 0
-- rate = rate > SAMP_RATE ? SAMP_RATE : rate;
-+ /* Deactivate codec */
-+ wrcodec(WM_REG_ACTIVE_CTRL, 0x00);
-
-- wrcodec(0, 0); /* I don't yet know what to write here if we vra */
-+ /* Disable I2S controller */
-+ ip->psc_i2scfg &= ~PSC_I2SCFG_DE_ENABLE;
-+ /* Wait for device disabled */
-+ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 1);
-+
-+ cfg = ip->psc_i2scfg;
-+ /* Clear WS and DIVIDER values */
-+ cfg &= ~(PSC_I2SCFG_WS_MASK | PSC_I2SCFG_DIV_MASK);
-+ cfg |= PSC_I2SCFG_WS(ws) | div;
-+ /* Reconfigure and enable */
-+ ip->psc_i2scfg = cfg | PSC_I2SCFG_DE_ENABLE;
-
-- adc->sample_rate = rate;
-- dac->sample_rate = rate;
--#endif
-+ /* Wait for device enabled */
-+ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 0);
-+
-+ /* Set appropriate sampling rate */
-+ wrcodec(WM_REG_SAMPLING_CONTROL, bosr | mode | sr);
-+
-+ /* Activate codec */
-+ wrcodec(WM_REG_ACTIVE_CTRL, 0x01);
- }
-
- static void
-@@ -354,8 +652,7 @@
- ip->psc_i2spcr = PSC_I2SPCR_RP;
- au_sync();
-
-- /* Wait for Receive Busy to show disabled.
-- */
-+ /* Wait for Receive Busy to show disabled. */
- do {
- stat = ip->psc_i2sstat;
- au_sync();
-@@ -463,7 +760,6 @@
- if (db->num_channels == 1)
- db->cnt_factor *= 2;
- db->cnt_factor *= db->src_factor;
--
- db->count = 0;
- db->dma_qcount = 0;
- db->nextIn = db->nextOut = db->rawbuf;
-@@ -546,12 +842,13 @@
- if (i2s_stat & (PSC_I2SSTAT_TF | PSC_I2SSTAT_TR | PSC_I2SSTAT_TF))
- dbg("I2S status = 0x%08x", i2s_stat);
- #endif
-+
- db->dma_qcount--;
-
- if (db->count >= db->fragsize) {
-- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
-- db->fragsize) == 0) {
-- err("qcount < 2 and no ring room!");
-+ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0)
-+ {
-+ err("qcount < MIN_Q_COUNT and no ring room!");
- }
- db->nextOut += db->fragsize;
- if (db->nextOut >= db->rawbuf + db->dmasize)
-@@ -606,65 +903,43 @@
-
- }
-
--static loff_t
--au1550_llseek(struct file *file, loff_t offset, int origin)
--{
-- return -ESPIPE;
--}
--
--
--#if 0
--static int
--au1550_open_mixdev(struct inode *inode, struct file *file)
--{
-- file->private_data = &au1550_state;
-- return 0;
--}
--
--static int
--au1550_release_mixdev(struct inode *inode, struct file *file)
--{
-- return 0;
--}
--
--static int
--mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd,
-- unsigned long arg)
--{
-- return codec->mixer_ioctl(codec, cmd, arg);
--}
--
--static int
--au1550_ioctl_mixdev(struct inode *inode, struct file *file,
-- unsigned int cmd, unsigned long arg)
--{
-- struct au1550_state *s = (struct au1550_state *)file->private_data;
-- struct ac97_codec *codec = s->codec;
--
-- return mixdev_ioctl(codec, cmd, arg);
--}
--
--static /*const */ struct file_operations au1550_mixer_fops = {
-- owner:THIS_MODULE,
-- llseek:au1550_llseek,
-- ioctl:au1550_ioctl_mixdev,
-- open:au1550_open_mixdev,
-- release:au1550_release_mixdev,
--};
--#endif
--
- static int
- drain_dac(struct au1550_state *s, int nonblock)
- {
- unsigned long flags;
- int count, tmo;
-
-+ struct dmabuf *db = &s->dma_dac;
-+
-+ //DPRINTF();
- if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped)
- return 0;
-
- for (;;) {
- spin_lock_irqsave(&s->lock, flags);
-- count = s->dma_dac.count;
-+ count = db->count;
-+
-+ /* Pad the ddma buffer with zeros if the amount remaining
-+ * is not a multiple of fragsize */
-+ if(count % db->fragsize != 0)
-+ {
-+ int pad = db->fragsize - (count % db->fragsize);
-+ char* bufptr = db->nextIn;
-+ char* bufend = db->rawbuf + db->dmasize;
-+
-+ if((bufend - bufptr) < pad)
-+ printk("Error! ddma padding is bigger than available ring space!\n");
-+ else
-+ {
-+ memset((void*)bufptr, 0, pad);
-+ count += pad;
-+ db->nextIn += pad;
-+ db->count += pad;
-+ if (db->dma_qcount == 0)
-+ start_dac(s);
-+ db->dma_qcount++;
-+ }
-+ }
- spin_unlock_irqrestore(&s->lock, flags);
- if (count <= 0)
- break;
-@@ -672,9 +947,9 @@
- break;
- if (nonblock)
- return -EBUSY;
-- tmo = 1000 * count / (s->no_vra ?
-- SAMP_RATE : s->dma_dac.sample_rate);
-+ tmo = 1000 * count / s->dma_dac.sample_rate;
- tmo /= s->dma_dac.dma_bytes_per_sample;
-+
- au1550_delay(tmo);
- }
- if (signal_pending(current))
-@@ -698,8 +973,7 @@
- * If interpolating (no VRA), duplicate every audio frame src_factor times.
- */
- static int
--translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf,
-- int dmacount)
-+translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, int dmacount)
- {
- int sample, i;
- int interp_bytes_per_sample;
-@@ -737,11 +1011,12 @@
-
- /* duplicate every audio frame src_factor times
- */
-- for (i = 0; i < db->src_factor; i++)
-+ for (i = 0; i < db->src_factor; i++) {
- memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
-+ dmabuf += interp_bytes_per_sample;
-+ }
-
- userbuf += db->user_bytes_per_sample;
-- dmabuf += interp_bytes_per_sample;
- }
-
- return num_samples * interp_bytes_per_sample;
-@@ -996,15 +1271,14 @@
- * on the dma queue. If the queue count reaches zero,
- * we know the dma has stopped.
- */
-- while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
-+ while ((db->dma_qcount < MIN_Q_COUNT) && (db->count >= db->fragsize)) {
- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- db->fragsize) == 0) {
-- err("qcount < 2 and no ring room!");
-+ err("qcount < MIN_Q_COUNT and no ring room!");
- }
- db->nextOut += db->fragsize;
- if (db->nextOut >= db->rawbuf + db->dmasize)
- db->nextOut -= db->dmasize;
-- db->count -= db->fragsize;
- db->total_bytes += db->dma_fragsize;
- if (db->dma_qcount == 0)
- start_dac(s);
-@@ -1017,7 +1291,6 @@
- buffer += usercnt;
- ret += usercnt;
- } /* while (count > 0) */
--
- out:
- up(&s->sem);
- out2:
-@@ -1371,9 +1644,6 @@
- s->dma_dac.cnt_factor;
- abinfo.fragstotal = s->dma_dac.numfrag;
- abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
--#ifdef AU1000_VERBOSE_DEBUG
-- dbg("bytes=%d, fragments=%d", abinfo.bytes, abinfo.fragments);
--#endif
- return copy_to_user((void *) arg, &abinfo,
- sizeof(abinfo)) ? -EFAULT : 0;
-
-@@ -1536,13 +1806,9 @@
- case SNDCTL_DSP_SETSYNCRO:
- case SOUND_PCM_READ_FILTER:
- return -EINVAL;
-+ default: break;
- }
--
--#if 0
-- return mixdev_ioctl(s->codec, cmd, arg);
--#else
- return 0;
--#endif
+- wrcodec(0x1e, 0x00); /* Reset */
+- au1550_delay(200);
+- wrcodec(0x0c, 0x00); /* Power up everything */
+- au1550_delay(10);
+- wrcodec(0x12, 0x00); /* Deactivate codec */
+- au1550_delay(10);
+- wrcodec(0x08, 0x10); /* Select DAC outputs to line out */
+- au1550_delay(10);
+- wrcodec(0x0a, 0x00); /* Disable output mute */
+- au1550_delay(10);
+- wrcodec(0x05, 0x70); /* lower output volume on headphone */
+- au1550_delay(10);
+- wrcodec(0x0e, 0x02); /* Set slave, 16-bit, I2S modes */
+- au1550_delay(10);
+- wrcodec(0x10, 0x01); /* 12MHz (USB), 250fs */
+- au1550_delay(10);
+- wrcodec(0x12, 0x01); /* Activate codec */
+- au1550_delay(10);
++ wrcodec(WM_REG_RESET, 0x00); /* Reset */
++ wrcodec(WM_REG_POWER_DOWN_CTRL, 0x00); /* Power up everything */
++ wrcodec(WM_REG_ACTIVE_CTRL, 0x00); /* Deactivate codec */
++ wrcodec(WM_REG_ANALOGUE_AUDIO_PATH_CTRL, 0x10); /* Select DAC outputs to line out */
++ wrcodec(WM_REG_DIGITAL_AUDIO_PATH_CTRL, 0x00); /* Disable output mute */
++ wm_i2s_write_mixer(s, SOUND_MIXER_PCM, 74, 74);
++ wrcodec(WM_REG_DIGITAL_AUDIO_IF, 0x02); /* Set slave, 16-bit, I2S modes */
++ wrcodec(WM_REG_ACTIVE_CTRL, 0x01); /* Activate codec */
}
+ /* stop the ADC before calling */
+@@ -256,27 +502,16 @@
+ set_adc_rate(struct au1550_state *s, unsigned rate)
+ {
+ struct dmabuf *adc = &s->dma_adc;
+- struct dmabuf *dac = &s->dma_dac;
-@@ -1664,15 +1930,15 @@
- MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com");
- MODULE_DESCRIPTION("Au1550 Audio Driver");
+- if (s->no_vra) {
+- /* calc SRC factor
+- */
++ #if defined(WM_MODE_USB)
+ adc->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
+ adc->sample_rate = SAMP_RATE / adc->src_factor;
+ return;
+- }
++ #else
++ //TODO: Need code for normal mode
++ #endif
-+#if defined(WM_MODE_USB)
- /* Set up an internal clock for the PSC3. This will then get
- * driven out of the Au1550 as the master.
- */
- static void
- intclk_setup(void)
- {
-- uint clk, rate, stat;
+ adc->src_factor = 1;
-
-- /* Wire up Freq4 as a clock for the PSC3.
-+ uint clk, rate;
-+ /* Wire up Freq4 as a clock for the PSC.
- * We know SMBus uses Freq3.
- * By making changes to this rate, plus the word strobe
- * size, we can make fine adjustments to the actual data rate.
-@@ -1700,11 +1966,17 @@
- */
- clk = au_readl(SYS_CLKSRC);
- au_sync();
-+#if defined(CONFIG_SOC_AU1550)
- clk &= ~0x01f00000;
- clk |= (6 << 22);
-+#elif defined(CONFIG_SOC_AU1200)
-+ clk &= ~0x3e000000;
-+ clk |= (6 << 27);
-+#endif
- au_writel(clk, SYS_CLKSRC);
- au_sync();
+-
+-#if 0
+- rate = rate > SAMP_RATE ? SAMP_RATE : rate;
+-
+- wrcodec(0, 0); /* I don't yet know what to write here if we vra */
+-
+- adc->sample_rate = rate;
+- dac->sample_rate = rate;
+-#endif
}
-+#endif
- static int __devinit
- au1550_probe(void)
-@@ -1724,6 +1996,11 @@
- init_MUTEX(&s->open_sem);
- spin_lock_init(&s->lock);
+ /* stop the DAC before calling */
+@@ -284,26 +519,89 @@
+ set_dac_rate(struct au1550_state *s, unsigned rate)
+ {
+ struct dmabuf *dac = &s->dma_dac;
+- struct dmabuf *adc = &s->dma_adc;
-+ /* CPLD Mux for I2s */
+- if (s->no_vra) {
+- /* calc SRC factor
+- */
+- dac->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
+- dac->sample_rate = SAMP_RATE / dac->src_factor;
+- return;
++ u16 sr, ws, div, bosr, mode;
++ volatile psc_i2s_t* ip = (volatile psc_i2s_t *)I2S_PSC_BASE;
++ u32 cfg;
+
-+#if defined(CONFIG_MIPS_PB1200)
-+ bcsr->resets |= BCSR_RESETS_PCS1MUX;
-+#endif
-
- s->psc_addr = (volatile psc_i2s_t *)I2S_PSC_BASE;
- ip = s->psc_addr;
-@@ -1765,9 +2042,8 @@
-
- if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0)
- goto err_dev1;
--#if 0
-- if ((s->codec->dev_mixer =
-- register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
-+#if 1
-+ if ((s->dev_mixer = register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
- goto err_dev2;
- #endif
-
-@@ -1777,7 +2053,6 @@
- proc_au1550_dump, NULL);
- #endif /* AU1550_DEBUG */
-
-- intclk_setup();
-
- /* The GPIO for the appropriate PSC was configured by the
- * board specific start up.
-@@ -1786,7 +2061,12 @@
- */
- ip->psc_ctrl = PSC_CTRL_DISABLE; /* Disable PSC */
- au_sync();
-+#if defined(WM_MODE_USB)
-+ intclk_setup();
- ip->psc_sel = (PSC_SEL_CLK_INTCLK | PSC_SEL_PS_I2SMODE);
-+#else
-+ ip->psc_sel = (PSC_SEL_CLK_EXTCLK | PSC_SEL_PS_I2SMODE);
-+#endif
- au_sync();
-
- /* Enable PSC
-@@ -1806,42 +2086,18 @@
- * Actual I2S mode (first bit delayed by one clock).
- * Master mode (We provide the clock from the PSC).
- */
-- val = PSC_I2SCFG_SET_LEN(16);
--#ifdef TRY_441KHz
-- /* This really should be 250, but it appears that all of the
-- * PLLs, dividers and so on in the chain shift it. That's the
-- * problem with sourceing the clock instead of letting the very
-- * stable codec provide it. But, the PSC doesn't appear to want
-- * to work in slave mode, so this is what we get. It's not
-- * studio quality timing, but it's good enough for listening
-- * to mp3s.
-- */
-- val |= PSC_I2SCFG_SET_WS(252);
--#else
-- val |= PSC_I2SCFG_SET_WS(250);
--#endif
-- val |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
++ #if defined(CONFIG_MIPS_FICMMP)
++ rate = ficmmp_set_i2s_sample_rate(rate);
++ #endif
+
-+ val = PSC_I2SCFG_SET_LEN(16) | PSC_I2SCFG_WS(WS_128FS) | PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
- PSC_I2SCFG_BI | PSC_I2SCFG_XM;
-
-- ip->psc_i2scfg = val;
-- au_sync();
-- val |= PSC_I2SCFG_DE_ENABLE;
-- ip->psc_i2scfg = val;
-- au_sync();
-+ ip->psc_i2scfg = val | PSC_I2SCFG_DE_ENABLE;
-
-- /* Wait for Device ready.
-- */
-- do {
-- val = ip->psc_i2sstat;
-- au_sync();
-- } while ((val & PSC_I2SSTAT_DR) == 0);
-+ set_dac_rate(s, 8000); //Set default rate
-
-- val = ip->psc_i2scfg;
-- au_sync();
-+ codec_init(s);
++ switch(rate)
++ {
++ case 96000:
++ sr = WM_SC_SR_96000;
++ ws = WS_64FS;
++ div = PSC_I2SCFG_DIV2;
++ break;
++ case 88200:
++ sr = WM_SC_SR_88200;
++ ws = WS_64FS;
++ div = PSC_I2SCFG_DIV2;
++ break;
++ case 44100:
++ sr = WM_SC_SR_44100;
++ ws = WS_128FS;
++ div = PSC_I2SCFG_DIV2;
++ break;
++ case 48000:
++ sr = WM_SC_SR_48000;
++ ws = WS_128FS;
++ div = PSC_I2SCFG_DIV2;
++ break;
++ case 32000:
++ sr = WM_SC_SR_32000;
++ ws = WS_96FS;
++ div = PSC_I2SCFG_DIV4;
++ break;
++ case 8018:
++ sr = WM_SC_SR_8018;
++ ws = WS_128FS;
++ div = PSC_I2SCFG_DIV2;
++ break;
++ case 8000:
++ default:
++ sr = WM_SC_SR_8000;
++ ws = WS_96FS;
++ div = PSC_I2SCFG_DIV16;
++ break;
+ }
-- codec_init();
-+ s->no_vra = vra ? 0 : 1;
++ #if defined(WM_MODE_USB)
++ mode = WM_SC_MODE_USB;
++ #else
++ mode = WM_SC_MODE_NORMAL;
++ #endif
++
++ bosr = 0;
++
+ dac->src_factor = 1;
++ dac->sample_rate = rate;
-- s->no_vra = 1;
- if (s->no_vra)
- info("no VRA, interpolating and decimating");
+-#if 0
+- rate = rate > SAMP_RATE ? SAMP_RATE : rate;
++ /* Deactivate codec */
++ wrcodec(WM_REG_ACTIVE_CTRL, 0x00);
-@@ -1866,6 +2122,8 @@
- err_dev2:
- unregister_sound_dsp(s->dev_audio);
- #endif
-+ err_dev2:
-+ unregister_sound_dsp(s->dev_audio);
- err_dev1:
- au1xxx_dbdma_chan_free(s->dma_adc.dmanr);
- err_dma2:
-diff -Nur linux-2.4.29/drivers/sound/au1550_psc.c linux-mips/drivers/sound/au1550_psc.c
---- linux-2.4.29/drivers/sound/au1550_psc.c 2005-01-19 15:10:04.000000000 +0100
-+++ linux-mips/drivers/sound/au1550_psc.c 2005-01-31 12:59:41.000000000 +0100
-@@ -30,6 +30,7 @@
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
+- wrcodec(0, 0); /* I don't yet know what to write here if we vra */
++ /* Disable I2S controller */
++ ip->psc_i2scfg &= ~PSC_I2SCFG_DE_ENABLE;
++ /* Wait for device disabled */
++ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 1);
+
- #include <linux/version.h>
- #include <linux/module.h>
- #include <linux/string.h>
-@@ -63,6 +64,14 @@
- #include <asm/db1x00.h>
- #endif
++ cfg = ip->psc_i2scfg;
++ /* Clear WS and DIVIDER values */
++ cfg &= ~(PSC_I2SCFG_WS_MASK | PSC_I2SCFG_DIV_MASK);
++ cfg |= PSC_I2SCFG_WS(ws) | div;
++ /* Reconfigure and enable */
++ ip->psc_i2scfg = cfg | PSC_I2SCFG_DE_ENABLE;
-+#ifdef CONFIG_MIPS_PB1200
-+#include <asm/pb1200.h>
-+#endif
+- adc->sample_rate = rate;
+- dac->sample_rate = rate;
+-#endif
++ /* Wait for device enabled */
++ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 0);
+
-+#ifdef CONFIG_MIPS_DB1200
-+#include <asm/db1200.h>
-+#endif
++ /* Set appropriate sampling rate */
++ wrcodec(WM_REG_SAMPLING_CONTROL, bosr | mode | sr);
+
- #undef OSS_DOCUMENTED_MIXER_SEMANTICS
-
- #define AU1550_MODULE_NAME "Au1550 psc audio"
-@@ -521,7 +530,14 @@
- spin_unlock_irqrestore(&s->lock, flags);
- }
-
--
-+/*
-+ NOTE: The xmit slots cannot be changed on the fly when in full-duplex
-+ because the AC'97 block must be stopped/started. When using this driver
-+ in full-duplex (in & out at the same time), the DMA engine will stop if
-+ you disable the block.
-+ TODO: change implementation to properly restart adc/dac after setting
-+ xmit slots.
-+*/
- static void
- set_xmit_slots(int num_channels)
- {
-@@ -565,6 +581,14 @@
- } while ((stat & PSC_AC97STAT_DR) == 0);
++ /* Activate codec */
++ wrcodec(WM_REG_ACTIVE_CTRL, 0x01);
}
-+/*
-+ NOTE: The recv slots cannot be changed on the fly when in full-duplex
-+ because the AC'97 block must be stopped/started. When using this driver
-+ in full-duplex (in & out at the same time), the DMA engine will stop if
-+ you disable the block.
-+ TODO: change implementation to properly restart adc/dac after setting
-+ recv slots.
-+*/
static void
- set_recv_slots(int num_channels)
- {
-@@ -608,7 +632,6 @@
-
- spin_lock_irqsave(&s->lock, flags);
-
-- set_xmit_slots(db->num_channels);
- au_writel(PSC_AC97PCR_TC, PSC_AC97PCR);
+@@ -354,8 +652,7 @@
+ ip->psc_i2spcr = PSC_I2SPCR_RP;
au_sync();
- au_writel(PSC_AC97PCR_TS, PSC_AC97PCR);
-@@ -640,7 +663,6 @@
- db->nextIn -= db->dmasize;
- }
-- set_recv_slots(db->num_channels);
- au1xxx_dbdma_start(db->dmanr);
- au_writel(PSC_AC97PCR_RC, PSC_AC97PCR);
- au_sync();
-@@ -752,12 +774,16 @@
- if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE))
- dbg("AC97C status = 0x%08x", ac97c_stat);
+- /* Wait for Receive Busy to show disabled.
+- */
++ /* Wait for Receive Busy to show disabled. */
+ do {
+ stat = ip->psc_i2sstat;
+ au_sync();
+@@ -463,7 +760,6 @@
+ if (db->num_channels == 1)
+ db->cnt_factor *= 2;
+ db->cnt_factor *= db->src_factor;
+-
+ db->count = 0;
+ db->dma_qcount = 0;
+ db->nextIn = db->nextOut = db->rawbuf;
+@@ -546,12 +842,13 @@
+ if (i2s_stat & (PSC_I2SSTAT_TF | PSC_I2SSTAT_TR | PSC_I2SSTAT_TF))
+ dbg("I2S status = 0x%08x", i2s_stat);
#endif
-+ /* There is a possiblity that we are getting 1 interrupt for
-+ multiple descriptors. Use ddma api to find out how many
-+ completed.
-+ */
++
db->dma_qcount--;
if (db->count >= db->fragsize) {
- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- db->fragsize) == 0) {
+- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
+- db->fragsize) == 0) {
- err("qcount < 2 and no ring room!");
-+ err("qcount < 2 and no ring room1!");
++ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0)
++ {
++ err("qcount < MIN_Q_COUNT and no ring room!");
}
db->nextOut += db->fragsize;
if (db->nextOut >= db->rawbuf + db->dmasize)
-@@ -941,11 +967,12 @@
-
- /* duplicate every audio frame src_factor times
- */
-- for (i = 0; i < db->src_factor; i++)
-+ for (i = 0; i < db->src_factor; i++) {
- memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
-+ dmabuf += interp_bytes_per_sample;
-+ }
-
- userbuf += db->user_bytes_per_sample;
-- dmabuf += interp_bytes_per_sample;
- }
-
- return num_samples * interp_bytes_per_sample;
-@@ -1203,7 +1230,7 @@
- while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- db->fragsize) == 0) {
-- err("qcount < 2 and no ring room!");
-+ err("qcount < 2 and no ring room!0");
- }
- db->nextOut += db->fragsize;
- if (db->nextOut >= db->rawbuf + db->dmasize)
-@@ -1481,6 +1508,7 @@
- return -EINVAL;
- stop_adc(s);
- s->dma_adc.num_channels = val;
-+ set_recv_slots(val);
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- }
-@@ -1538,6 +1566,7 @@
- }
+@@ -606,65 +903,43 @@
- s->dma_dac.num_channels = val;
-+ set_xmit_slots(val);
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
-@@ -1832,10 +1861,8 @@
- down(&s->open_sem);
- }
+ }
-- stop_dac(s);
-- stop_adc(s);
+-static loff_t
+-au1550_llseek(struct file *file, loff_t offset, int origin)
+-{
+- return -ESPIPE;
+-}
-
- if (file->f_mode & FMODE_READ) {
-+ stop_adc(s);
- s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
- s->dma_adc.subdivision = s->dma_adc.total_bytes = 0;
- s->dma_adc.num_channels = 1;
-@@ -1846,6 +1873,7 @@
- }
-
- if (file->f_mode & FMODE_WRITE) {
-+ stop_dac(s);
- s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
- s->dma_dac.subdivision = s->dma_dac.total_bytes = 0;
- s->dma_dac.num_channels = 1;
-@@ -2091,6 +2119,9 @@
- ac97_read_proc, &s->codec);
- #endif
-
-+ set_xmit_slots(1);
-+ set_recv_slots(1);
-+
- return 0;
-
- err_dev3:
-diff -Nur linux-2.4.29/drivers/tc/lk201.c linux-mips/drivers/tc/lk201.c
---- linux-2.4.29/drivers/tc/lk201.c 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/tc/lk201.c 2004-09-28 02:53:04.000000000 +0200
-@@ -5,7 +5,7 @@
- * for more details.
- *
- * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
-- * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
-+ * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki
- */
-
- #include <linux/config.h>
-@@ -23,8 +23,8 @@
- #include <asm/keyboard.h>
- #include <asm/dec/tc.h>
- #include <asm/dec/machtype.h>
-+#include <asm/dec/serial.h>
-
--#include "zs.h"
- #include "lk201.h"
-
- /*
-@@ -55,19 +55,20 @@
- unsigned char kbd_sysrq_key = -1;
- #endif
-
--#define KEYB_LINE 3
-+#define KEYB_LINE_ZS 3
-+#define KEYB_LINE_DZ 0
-
--static int __init lk201_init(struct dec_serial *);
--static void __init lk201_info(struct dec_serial *);
--static void lk201_kbd_rx_char(unsigned char, unsigned char);
-+static int __init lk201_init(void *);
-+static void __init lk201_info(void *);
-+static void lk201_rx_char(unsigned char, unsigned char);
-
--struct zs_hook lk201_kbdhook = {
-+static struct dec_serial_hook lk201_hook = {
- .init_channel = lk201_init,
- .init_info = lk201_info,
- .rx_char = NULL,
- .poll_rx_char = NULL,
- .poll_tx_char = NULL,
-- .cflags = B4800 | CS8 | CSTOPB | CLOCAL
-+ .cflags = B4800 | CS8 | CSTOPB | CLOCAL,
- };
-
- /*
-@@ -93,28 +94,28 @@
- LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
- };
+-
+-#if 0
+-static int
+-au1550_open_mixdev(struct inode *inode, struct file *file)
+-{
+- file->private_data = &au1550_state;
+- return 0;
+-}
+-
+-static int
+-au1550_release_mixdev(struct inode *inode, struct file *file)
+-{
+- return 0;
+-}
+-
+-static int
+-mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd,
+- unsigned long arg)
+-{
+- return codec->mixer_ioctl(codec, cmd, arg);
+-}
+-
+-static int
+-au1550_ioctl_mixdev(struct inode *inode, struct file *file,
+- unsigned int cmd, unsigned long arg)
+-{
+- struct au1550_state *s = (struct au1550_state *)file->private_data;
+- struct ac97_codec *codec = s->codec;
+-
+- return mixdev_ioctl(codec, cmd, arg);
+-}
+-
+-static /*const */ struct file_operations au1550_mixer_fops = {
+- owner:THIS_MODULE,
+- llseek:au1550_llseek,
+- ioctl:au1550_ioctl_mixdev,
+- open:au1550_open_mixdev,
+- release:au1550_release_mixdev,
+-};
+-#endif
+-
+ static int
+ drain_dac(struct au1550_state *s, int nonblock)
+ {
+ unsigned long flags;
+ int count, tmo;
--static struct dec_serial* lk201kbd_info;
-+static void *lk201_handle;
++ struct dmabuf *db = &s->dma_dac;
++
++ //DPRINTF();
+ if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped)
+ return 0;
--static int lk201_send(struct dec_serial *info, unsigned char ch)
-+static int lk201_send(unsigned char ch)
- {
-- if (info->hook->poll_tx_char(info, ch)) {
-+ if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
- printk(KERN_ERR "lk201: transmit timeout\n");
- return -EIO;
+ for (;;) {
+ spin_lock_irqsave(&s->lock, flags);
+- count = s->dma_dac.count;
++ count = db->count;
++
++ /* Pad the ddma buffer with zeros if the amount remaining
++ * is not a multiple of fragsize */
++ if(count % db->fragsize != 0)
++ {
++ int pad = db->fragsize - (count % db->fragsize);
++ char* bufptr = db->nextIn;
++ char* bufend = db->rawbuf + db->dmasize;
++
++ if((bufend - bufptr) < pad)
++ printk("Error! ddma padding is bigger than available ring space!\n");
++ else
++ {
++ memset((void*)bufptr, 0, pad);
++ count += pad;
++ db->nextIn += pad;
++ db->count += pad;
++ if (db->dma_qcount == 0)
++ start_dac(s);
++ db->dma_qcount++;
++ }
++ }
+ spin_unlock_irqrestore(&s->lock, flags);
+ if (count <= 0)
+ break;
+@@ -672,9 +947,9 @@
+ break;
+ if (nonblock)
+ return -EBUSY;
+- tmo = 1000 * count / (s->no_vra ?
+- SAMP_RATE : s->dma_dac.sample_rate);
++ tmo = 1000 * count / s->dma_dac.sample_rate;
+ tmo /= s->dma_dac.dma_bytes_per_sample;
++
+ au1550_delay(tmo);
}
- return 0;
- }
-
--static inline int lk201_get_id(struct dec_serial *info)
-+static inline int lk201_get_id(void)
+ if (signal_pending(current))
+@@ -698,8 +973,7 @@
+ * If interpolating (no VRA), duplicate every audio frame src_factor times.
+ */
+ static int
+-translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf,
+- int dmacount)
++translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, int dmacount)
{
-- return lk201_send(info, LK_CMD_REQ_ID);
-+ return lk201_send(LK_CMD_REQ_ID);
- }
+ int sample, i;
+ int interp_bytes_per_sample;
+@@ -737,11 +1011,12 @@
--static int lk201_reset(struct dec_serial *info)
-+static int lk201_reset(void)
- {
- int i, r;
+ /* duplicate every audio frame src_factor times
+ */
+- for (i = 0; i < db->src_factor; i++)
++ for (i = 0; i < db->src_factor; i++) {
+ memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
++ dmabuf += interp_bytes_per_sample;
++ }
- for (i = 0; i < sizeof(lk201_reset_string); i++) {
-- r = lk201_send(info, lk201_reset_string[i]);
-+ r = lk201_send(lk201_reset_string[i]);
- if (r < 0)
- return r;
+ userbuf += db->user_bytes_per_sample;
+- dmabuf += interp_bytes_per_sample;
}
-@@ -203,24 +204,26 @@
- static int write_kbd_rate(struct kbd_repeat *rep)
- {
-- struct dec_serial* info = lk201kbd_info;
- int delay, rate;
- int i;
+ return num_samples * interp_bytes_per_sample;
+@@ -996,15 +1271,14 @@
+ * on the dma queue. If the queue count reaches zero,
+ * we know the dma has stopped.
+ */
+- while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
++ while ((db->dma_qcount < MIN_Q_COUNT) && (db->count >= db->fragsize)) {
+ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
+ db->fragsize) == 0) {
+- err("qcount < 2 and no ring room!");
++ err("qcount < MIN_Q_COUNT and no ring room!");
+ }
+ db->nextOut += db->fragsize;
+ if (db->nextOut >= db->rawbuf + db->dmasize)
+ db->nextOut -= db->dmasize;
+- db->count -= db->fragsize;
+ db->total_bytes += db->dma_fragsize;
+ if (db->dma_qcount == 0)
+ start_dac(s);
+@@ -1017,7 +1291,6 @@
+ buffer += usercnt;
+ ret += usercnt;
+ } /* while (count > 0) */
+-
+ out:
+ up(&s->sem);
+ out2:
+@@ -1371,9 +1644,6 @@
+ s->dma_dac.cnt_factor;
+ abinfo.fragstotal = s->dma_dac.numfrag;
+ abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
+-#ifdef AU1000_VERBOSE_DEBUG
+- dbg("bytes=%d, fragments=%d", abinfo.bytes, abinfo.fragments);
+-#endif
+ return copy_to_user((void *) arg, &abinfo,
+ sizeof(abinfo)) ? -EFAULT : 0;
- delay = rep->delay / 5;
- rate = rep->rate;
- for (i = 0; i < 4; i++) {
-- if (info->hook->poll_tx_char(info, LK_CMD_RPT_RATE(i)))
-+ if (lk201_hook.poll_tx_char(lk201_handle,
-+ LK_CMD_RPT_RATE(i)))
- return 1;
-- if (info->hook->poll_tx_char(info, LK_PARAM_DELAY(delay)))
-+ if (lk201_hook.poll_tx_char(lk201_handle,
-+ LK_PARAM_DELAY(delay)))
- return 1;
-- if (info->hook->poll_tx_char(info, LK_PARAM_RATE(rate)))
-+ if (lk201_hook.poll_tx_char(lk201_handle,
-+ LK_PARAM_RATE(rate)))
- return 1;
+@@ -1536,13 +1806,9 @@
+ case SNDCTL_DSP_SETSYNCRO:
+ case SOUND_PCM_READ_FILTER:
+ return -EINVAL;
++ default: break;
}
+-
+-#if 0
+- return mixdev_ioctl(s->codec, cmd, arg);
+-#else
return 0;
+-#endif
}
--static int lk201kbd_rate(struct kbd_repeat *rep)
-+static int lk201_kbd_rate(struct kbd_repeat *rep)
- {
- if (rep == NULL)
- return -EINVAL;
-@@ -237,10 +240,8 @@
- return 0;
- }
--static void lk201kd_mksound(unsigned int hz, unsigned int ticks)
-+static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
+@@ -1664,15 +1930,15 @@
+ MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com");
+ MODULE_DESCRIPTION("Au1550 Audio Driver");
+
++#if defined(WM_MODE_USB)
+ /* Set up an internal clock for the PSC3. This will then get
+ * driven out of the Au1550 as the master.
+ */
+ static void
+ intclk_setup(void)
{
-- struct dec_serial* info = lk201kbd_info;
+- uint clk, rate, stat;
-
- if (!ticks)
- return;
+- /* Wire up Freq4 as a clock for the PSC3.
++ uint clk, rate;
++ /* Wire up Freq4 as a clock for the PSC.
+ * We know SMBus uses Freq3.
+ * By making changes to this rate, plus the word strobe
+ * size, we can make fine adjustments to the actual data rate.
+@@ -1700,11 +1966,17 @@
+ */
+ clk = au_readl(SYS_CLKSRC);
+ au_sync();
++#if defined(CONFIG_SOC_AU1550)
+ clk &= ~0x01f00000;
+ clk |= (6 << 22);
++#elif defined(CONFIG_SOC_AU1200)
++ clk &= ~0x3e000000;
++ clk |= (6 << 27);
++#endif
+ au_writel(clk, SYS_CLKSRC);
+ au_sync();
+ }
++#endif
-@@ -253,20 +254,19 @@
- ticks = 7;
- ticks = 7 - ticks;
+ static int __devinit
+ au1550_probe(void)
+@@ -1724,6 +1996,11 @@
+ init_MUTEX(&s->open_sem);
+ spin_lock_init(&s->lock);
-- if (info->hook->poll_tx_char(info, LK_CMD_ENB_BELL))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
- return;
-- if (info->hook->poll_tx_char(info, LK_PARAM_VOLUME(ticks)))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
- return;
-- if (info->hook->poll_tx_char(info, LK_CMD_BELL))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
- return;
- }
++ /* CPLD Mux for I2s */
++
++#if defined(CONFIG_MIPS_PB1200)
++ bcsr->resets |= BCSR_RESETS_PCS1MUX;
++#endif
- void kbd_leds(unsigned char leds)
- {
-- struct dec_serial* info = lk201kbd_info;
- unsigned char l = 0;
+ s->psc_addr = (volatile psc_i2s_t *)I2S_PSC_BASE;
+ ip = s->psc_addr;
+@@ -1765,9 +2042,8 @@
+
+ if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0)
+ goto err_dev1;
+-#if 0
+- if ((s->codec->dev_mixer =
+- register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
++#if 1
++ if ((s->dev_mixer = register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
+ goto err_dev2;
+ #endif
-- if (!info) /* FIXME */
-+ if (!lk201_handle) /* FIXME */
- return;
+@@ -1777,7 +2053,6 @@
+ proc_au1550_dump, NULL);
+ #endif /* AU1550_DEBUG */
- /* FIXME -- Only Hold and Lock LEDs for now. --macro */
-@@ -275,13 +275,13 @@
- if (leds & LED_CAP)
- l |= LK_LED_LOCK;
+- intclk_setup();
-- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_ON))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
- return;
-- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(l)))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
- return;
-- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_OFF))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
- return;
-- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(~l)))
-+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
- return;
- }
+ /* The GPIO for the appropriate PSC was configured by the
+ * board specific start up.
+@@ -1786,7 +2061,12 @@
+ */
+ ip->psc_ctrl = PSC_CTRL_DISABLE; /* Disable PSC */
+ au_sync();
++#if defined(WM_MODE_USB)
++ intclk_setup();
+ ip->psc_sel = (PSC_SEL_CLK_INTCLK | PSC_SEL_PS_I2SMODE);
++#else
++ ip->psc_sel = (PSC_SEL_CLK_EXTCLK | PSC_SEL_PS_I2SMODE);
++#endif
+ au_sync();
-@@ -307,7 +307,7 @@
- return 0x80;
- }
+ /* Enable PSC
+@@ -1806,42 +2086,18 @@
+ * Actual I2S mode (first bit delayed by one clock).
+ * Master mode (We provide the clock from the PSC).
+ */
+- val = PSC_I2SCFG_SET_LEN(16);
+-#ifdef TRY_441KHz
+- /* This really should be 250, but it appears that all of the
+- * PLLs, dividers and so on in the chain shift it. That's the
+- * problem with sourceing the clock instead of letting the very
+- * stable codec provide it. But, the PSC doesn't appear to want
+- * to work in slave mode, so this is what we get. It's not
+- * studio quality timing, but it's good enough for listening
+- * to mp3s.
+- */
+- val |= PSC_I2SCFG_SET_WS(252);
+-#else
+- val |= PSC_I2SCFG_SET_WS(250);
+-#endif
+- val |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
++
++ val = PSC_I2SCFG_SET_LEN(16) | PSC_I2SCFG_WS(WS_128FS) | PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
+ PSC_I2SCFG_BI | PSC_I2SCFG_XM;
--static void lk201_kbd_rx_char(unsigned char ch, unsigned char stat)
-+static void lk201_rx_char(unsigned char ch, unsigned char fl)
- {
- static unsigned char id[6];
- static int id_i;
-@@ -316,9 +316,8 @@
- static int prev_scancode;
- unsigned char c = scancodeRemap[ch];
+- ip->psc_i2scfg = val;
+- au_sync();
+- val |= PSC_I2SCFG_DE_ENABLE;
+- ip->psc_i2scfg = val;
+- au_sync();
++ ip->psc_i2scfg = val | PSC_I2SCFG_DE_ENABLE;
-- if (stat && stat != TTY_OVERRUN) {
-- printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n",
-- stat);
-+ if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
-+ printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
- return;
- }
+- /* Wait for Device ready.
+- */
+- do {
+- val = ip->psc_i2sstat;
+- au_sync();
+- } while ((val & PSC_I2SSTAT_DR) == 0);
++ set_dac_rate(s, 8000); //Set default rate
-@@ -335,7 +334,7 @@
- /* OK, the power-up concluded. */
- lk201_report(id);
- if (id[2] == LK_STAT_PWRUP_OK)
-- lk201_get_id(lk201kbd_info);
-+ lk201_get_id();
- else {
- id_i = 0;
- printk(KERN_ERR "lk201: keyboard power-up "
-@@ -345,7 +344,7 @@
- /* We got the ID; report it and start operation. */
- id_i = 0;
- lk201_id(id);
-- lk201_reset(lk201kbd_info);
-+ lk201_reset();
- }
- return;
- }
-@@ -398,29 +397,28 @@
- tasklet_schedule(&keyboard_tasklet);
- }
+- val = ip->psc_i2scfg;
+- au_sync();
++ codec_init(s);
--static void __init lk201_info(struct dec_serial *info)
-+static void __init lk201_info(void *handle)
- {
- }
+- codec_init();
++ s->no_vra = vra ? 0 : 1;
--static int __init lk201_init(struct dec_serial *info)
-+static int __init lk201_init(void *handle)
- {
- /* First install handlers. */
-- lk201kbd_info = info;
-- kbd_rate = lk201kbd_rate;
-- kd_mksound = lk201kd_mksound;
-+ lk201_handle = handle;
-+ kbd_rate = lk201_kbd_rate;
-+ kd_mksound = lk201_kd_mksound;
+- s->no_vra = 1;
+ if (s->no_vra)
+ info("no VRA, interpolating and decimating");
-- info->hook->rx_char = lk201_kbd_rx_char;
-+ lk201_hook.rx_char = lk201_rx_char;
+@@ -1866,6 +2122,8 @@
+ err_dev2:
+ unregister_sound_dsp(s->dev_audio);
+ #endif
++ err_dev2:
++ unregister_sound_dsp(s->dev_audio);
+ err_dev1:
+ au1xxx_dbdma_chan_free(s->dma_adc.dmanr);
+ err_dma2:
+diff -Nur linux-2.4.29/drivers/sound/au1550_psc.c linux-mips/drivers/sound/au1550_psc.c
+--- linux-2.4.29/drivers/sound/au1550_psc.c 2005-01-19 15:10:04.000000000 +0100
++++ linux-mips/drivers/sound/au1550_psc.c 2005-01-30 09:01:28.000000000 +0100
+@@ -30,6 +30,7 @@
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
++
+ #include <linux/version.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+@@ -63,6 +64,14 @@
+ #include <asm/db1x00.h>
+ #endif
- /* Then just issue a reset -- the handlers will do the rest. */
-- lk201_send(info, LK_CMD_POWER_UP);
-+ lk201_send(LK_CMD_POWER_UP);
++#ifdef CONFIG_MIPS_PB1200
++#include <asm/pb1200.h>
++#endif
++
++#ifdef CONFIG_MIPS_DB1200
++#include <asm/db1200.h>
++#endif
++
+ #undef OSS_DOCUMENTED_MIXER_SEMANTICS
- return 0;
+ #define AU1550_MODULE_NAME "Au1550 psc audio"
+@@ -521,7 +530,14 @@
+ spin_unlock_irqrestore(&s->lock, flags);
}
- void __init kbd_init_hw(void)
+-
++/*
++ NOTE: The xmit slots cannot be changed on the fly when in full-duplex
++ because the AC'97 block must be stopped/started. When using this driver
++ in full-duplex (in & out at the same time), the DMA engine will stop if
++ you disable the block.
++ TODO: change implementation to properly restart adc/dac after setting
++ xmit slots.
++*/
+ static void
+ set_xmit_slots(int num_channels)
{
-- extern int register_zs_hook(unsigned int, struct zs_hook *);
-- extern int unregister_zs_hook(unsigned int);
-+ int keyb_line;
-
- /* Maxine uses LK501 at the Access.Bus. */
- if (!LK_IFACE)
-@@ -428,19 +426,15 @@
-
- printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
-
-- if (LK_IFACE_ZS) {
-- /*
-- * kbd_init_hw() is being called before
-- * rs_init() so just register the kbd hook
-- * and let zs_init do the rest :-)
-- */
-- if(!register_zs_hook(KEYB_LINE, &lk201_kbdhook))
-- unregister_zs_hook(KEYB_LINE);
-- } else {
-- /*
-- * TODO: modify dz.c to allow similar hooks
-- * for LK201 handling on DS2100, DS3100, and DS5000/200
-- */
-- printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
-- }
-+ /*
-+ * kbd_init_hw() is being called before
-+ * rs_init() so just register the kbd hook
-+ * and let zs_init do the rest :-)
-+ */
-+ if (LK_IFACE_ZS)
-+ keyb_line = KEYB_LINE_ZS;
-+ else
-+ keyb_line = KEYB_LINE_DZ;
-+ if (!register_dec_serial_hook(keyb_line, &lk201_hook))
-+ unregister_dec_serial_hook(keyb_line);
+@@ -565,6 +581,14 @@
+ } while ((stat & PSC_AC97STAT_DR) == 0);
}
-diff -Nur linux-2.4.29/drivers/tc/zs.c linux-mips/drivers/tc/zs.c
---- linux-2.4.29/drivers/tc/zs.c 2005-01-19 15:10:05.000000000 +0100
-+++ linux-mips/drivers/tc/zs.c 2004-12-27 05:13:50.000000000 +0100
-@@ -68,6 +68,8 @@
- #include <asm/bitops.h>
- #include <asm/uaccess.h>
- #include <asm/bootinfo.h>
-+#include <asm/dec/serial.h>
-+
- #ifdef CONFIG_DECSTATION
- #include <asm/dec/interrupts.h>
- #include <asm/dec/machtype.h>
-@@ -160,8 +162,8 @@
- #ifdef CONFIG_SERIAL_DEC_CONSOLE
- static struct console sercons;
- #endif
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \
-- && !defined(MODULE)
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+ !defined(MODULE)
- static unsigned long break_pressed; /* break, really ... */
- #endif
-@@ -196,7 +198,6 @@
- /*
- * Debugging.
- */
--#undef SERIAL_DEBUG_INTR
- #undef SERIAL_DEBUG_OPEN
- #undef SERIAL_DEBUG_FLOW
- #undef SERIAL_DEBUG_THROTTLE
-@@ -221,10 +222,6 @@
- static struct termios *serial_termios[NUM_CHANNELS];
- static struct termios *serial_termios_locked[NUM_CHANNELS];
++/*
++ NOTE: The recv slots cannot be changed on the fly when in full-duplex
++ because the AC'97 block must be stopped/started. When using this driver
++ in full-duplex (in & out at the same time), the DMA engine will stop if
++ you disable the block.
++ TODO: change implementation to properly restart adc/dac after setting
++ recv slots.
++*/
+ static void
+ set_recv_slots(int num_channels)
+ {
+@@ -608,7 +632,6 @@
+
+ spin_lock_irqsave(&s->lock, flags);
--#ifndef MIN
--#define MIN(a,b) ((a) < (b) ? (a) : (b))
--#endif
--
- /*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
-@@ -386,8 +383,6 @@
- * -----------------------------------------------------------------------
- */
+- set_xmit_slots(db->num_channels);
+ au_writel(PSC_AC97PCR_TC, PSC_AC97PCR);
+ au_sync();
+ au_writel(PSC_AC97PCR_TS, PSC_AC97PCR);
+@@ -640,7 +663,6 @@
+ db->nextIn -= db->dmasize;
+ }
--static int tty_break; /* Set whenever BREAK condition is detected. */
--
- /*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
-@@ -414,20 +409,15 @@
- if (!tty && (!info->hook || !info->hook->rx_char))
- continue;
+- set_recv_slots(db->num_channels);
+ au1xxx_dbdma_start(db->dmanr);
+ au_writel(PSC_AC97PCR_RC, PSC_AC97PCR);
+ au_sync();
+@@ -752,12 +774,16 @@
+ if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE))
+ dbg("AC97C status = 0x%08x", ac97c_stat);
+ #endif
++ /* There is a possiblity that we are getting 1 interrupt for
++ multiple descriptors. Use ddma api to find out how many
++ completed.
++ */
+ db->dma_qcount--;
-- if (tty_break) {
-- tty_break = 0;
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
-- if (info->line == sercons.index) {
-- if (!break_pressed) {
-- break_pressed = jiffies;
-- goto ignore_char;
-- }
-- break_pressed = 0;
-- }
--#endif
-+ flag = TTY_NORMAL;
-+ if (info->tty_break) {
-+ info->tty_break = 0;
- flag = TTY_BREAK;
- if (info->flags & ZILOG_SAK)
- do_SAK(tty);
-+ /* Ignore the null char got when BREAK is removed. */
-+ if (ch == 0)
-+ continue;
- } else {
- if (stat & Rx_OVR) {
- flag = TTY_OVERRUN;
-@@ -435,20 +425,22 @@
- flag = TTY_FRAME;
- } else if (stat & PAR_ERR) {
- flag = TTY_PARITY;
-- } else
-- flag = 0;
-- if (flag)
-+ }
-+ if (flag != TTY_NORMAL)
- /* reset the error indication */
- write_zsreg(info->zs_channel, R0, ERR_RES);
+ if (db->count >= db->fragsize) {
+ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
+ db->fragsize) == 0) {
+- err("qcount < 2 and no ring room!");
++ err("qcount < 2 and no ring room1!");
}
+ db->nextOut += db->fragsize;
+ if (db->nextOut >= db->rawbuf + db->dmasize)
+@@ -941,11 +967,12 @@
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+ !defined(MODULE)
- if (break_pressed && info->line == sercons.index) {
-- if (ch != 0 &&
-- time_before(jiffies, break_pressed + HZ*5)) {
-+ /* Ignore the null char got when BREAK is removed. */
-+ if (ch == 0)
-+ continue;
-+ if (time_before(jiffies, break_pressed + HZ * 5)) {
- handle_sysrq(ch, regs, NULL, NULL);
- break_pressed = 0;
-- goto ignore_char;
-+ continue;
+ /* duplicate every audio frame src_factor times
+ */
+- for (i = 0; i < db->src_factor; i++)
++ for (i = 0; i < db->src_factor; i++) {
+ memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
++ dmabuf += interp_bytes_per_sample;
++ }
+
+ userbuf += db->user_bytes_per_sample;
+- dmabuf += interp_bytes_per_sample;
+ }
+
+ return num_samples * interp_bytes_per_sample;
+@@ -1203,7 +1230,7 @@
+ while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
+ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
+ db->fragsize) == 0) {
+- err("qcount < 2 and no ring room!");
++ err("qcount < 2 and no ring room!0");
}
- break_pressed = 0;
- }
-@@ -459,23 +451,7 @@
- return;
- }
+ db->nextOut += db->fragsize;
+ if (db->nextOut >= db->rawbuf + db->dmasize)
+@@ -1481,6 +1508,7 @@
+ return -EINVAL;
+ stop_adc(s);
+ s->dma_adc.num_channels = val;
++ set_recv_slots(val);
+ if ((ret = prog_dmabuf_adc(s)))
+ return ret;
+ }
+@@ -1538,6 +1566,7 @@
+ }
-- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-- static int flip_buf_ovf;
-- ++flip_buf_ovf;
-- continue;
-- }
-- tty->flip.count++;
-- {
-- static int flip_max_cnt;
-- if (flip_max_cnt < tty->flip.count)
-- flip_max_cnt = tty->flip.count;
-- }
+ s->dma_dac.num_channels = val;
++ set_xmit_slots(val);
+ if ((ret = prog_dmabuf_dac(s)))
+ return ret;
+ }
+@@ -1832,10 +1861,8 @@
+ down(&s->open_sem);
+ }
+
+- stop_dac(s);
+- stop_adc(s);
-
-- *tty->flip.flag_buf_ptr++ = flag;
-- *tty->flip.char_buf_ptr++ = ch;
--#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
-- ignore_char:
--#endif
-+ tty_insert_flip_char(tty, ch, flag);
+ if (file->f_mode & FMODE_READ) {
++ stop_adc(s);
+ s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
+ s->dma_adc.subdivision = s->dma_adc.total_bytes = 0;
+ s->dma_adc.num_channels = 1;
+@@ -1846,6 +1873,7 @@
}
- if (tty)
- tty_flip_buffer_push(tty);
-@@ -517,11 +493,15 @@
- /* Get status from Read Register 0 */
- stat = read_zsreg(info->zs_channel, R0);
-- if (stat & BRK_ABRT) {
--#ifdef SERIAL_DEBUG_INTR
-- printk("handling break....");
-+ if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
-+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
-+ !defined(MODULE)
-+ if (info->line == sercons.index) {
-+ if (!break_pressed)
-+ break_pressed = jiffies;
-+ } else
+ if (file->f_mode & FMODE_WRITE) {
++ stop_dac(s);
+ s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
+ s->dma_dac.subdivision = s->dma_dac.total_bytes = 0;
+ s->dma_dac.num_channels = 1;
+@@ -2091,6 +2119,9 @@
+ ac97_read_proc, &s->codec);
#endif
-- tty_break = 1;
-+ info->tty_break = 1;
- }
- if (info->zs_channel != info->zs_chan_a) {
-@@ -957,7 +937,7 @@
- save_flags(flags);
- while (1) {
- cli();
-- c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-+ c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- if (c <= 0)
- break;
-@@ -965,7 +945,7 @@
- if (from_user) {
- down(&tmp_buf_sem);
- copy_from_user(tmp_buf, buf, c);
-- c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-+ c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
- up(&tmp_buf_sem);
-@@ -1282,46 +1262,48 @@
- }
++ set_xmit_slots(1);
++ set_recv_slots(1);
++
+ return 0;
+
+ err_dev3:
+diff -Nur linux-2.4.29/drivers/tc/lk201.c linux-mips/drivers/tc/lk201.c
+--- linux-2.4.29/drivers/tc/lk201.c 2004-02-18 14:36:31.000000000 +0100
++++ linux-mips/drivers/tc/lk201.c 2004-09-28 02:53:04.000000000 +0200
+@@ -5,7 +5,7 @@
+ * for more details.
+ *
+ * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
+- * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
++ * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki
+ */
+
+ #include <linux/config.h>
+@@ -23,8 +23,8 @@
+ #include <asm/keyboard.h>
+ #include <asm/dec/tc.h>
+ #include <asm/dec/machtype.h>
++#include <asm/dec/serial.h>
+
+-#include "zs.h"
+ #include "lk201.h"
+
+ /*
+@@ -55,19 +55,20 @@
+ unsigned char kbd_sysrq_key = -1;
+ #endif
- switch (cmd) {
-- case TIOCMGET:
-- error = verify_area(VERIFY_WRITE, (void *) arg,
-- sizeof(unsigned int));
-- if (error)
-- return error;
-- return get_modem_info(info, (unsigned int *) arg);
-- case TIOCMBIS:
-- case TIOCMBIC:
-- case TIOCMSET:
-- return set_modem_info(info, cmd, (unsigned int *) arg);
-- case TIOCGSERIAL:
-- error = verify_area(VERIFY_WRITE, (void *) arg,
-- sizeof(struct serial_struct));
-- if (error)
-- return error;
-- return get_serial_info(info,
-- (struct serial_struct *) arg);
-- case TIOCSSERIAL:
-- return set_serial_info(info,
-- (struct serial_struct *) arg);
-- case TIOCSERGETLSR: /* Get line status register */
-- error = verify_area(VERIFY_WRITE, (void *) arg,
-- sizeof(unsigned int));
-- if (error)
-- return error;
-- else
-- return get_lsr_info(info, (unsigned int *) arg);
-+ case TIOCMGET:
-+ error = verify_area(VERIFY_WRITE, (void *)arg,
-+ sizeof(unsigned int));
-+ if (error)
-+ return error;
-+ return get_modem_info(info, (unsigned int *)arg);
+-#define KEYB_LINE 3
++#define KEYB_LINE_ZS 3
++#define KEYB_LINE_DZ 0
-- case TIOCSERGSTRUCT:
-- error = verify_area(VERIFY_WRITE, (void *) arg,
-- sizeof(struct dec_serial));
-- if (error)
-- return error;
-- copy_from_user((struct dec_serial *) arg,
-- info, sizeof(struct dec_serial));
-- return 0;
-+ case TIOCMBIS:
-+ case TIOCMBIC:
-+ case TIOCMSET:
-+ return set_modem_info(info, cmd, (unsigned int *)arg);
+-static int __init lk201_init(struct dec_serial *);
+-static void __init lk201_info(struct dec_serial *);
+-static void lk201_kbd_rx_char(unsigned char, unsigned char);
++static int __init lk201_init(void *);
++static void __init lk201_info(void *);
++static void lk201_rx_char(unsigned char, unsigned char);
-- default:
-- return -ENOIOCTLCMD;
-- }
-+ case TIOCGSERIAL:
-+ error = verify_area(VERIFY_WRITE, (void *)arg,
-+ sizeof(struct serial_struct));
-+ if (error)
-+ return error;
-+ return get_serial_info(info, (struct serial_struct *)arg);
-+
-+ case TIOCSSERIAL:
-+ return set_serial_info(info, (struct serial_struct *)arg);
-+
-+ case TIOCSERGETLSR: /* Get line status register */
-+ error = verify_area(VERIFY_WRITE, (void *)arg,
-+ sizeof(unsigned int));
-+ if (error)
-+ return error;
-+ else
-+ return get_lsr_info(info, (unsigned int *)arg);
-+
-+ case TIOCSERGSTRUCT:
-+ error = verify_area(VERIFY_WRITE, (void *)arg,
-+ sizeof(struct dec_serial));
-+ if (error)
-+ return error;
-+ copy_from_user((struct dec_serial *)arg, info,
-+ sizeof(struct dec_serial));
-+ return 0;
-+
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
+-struct zs_hook lk201_kbdhook = {
++static struct dec_serial_hook lk201_hook = {
+ .init_channel = lk201_init,
+ .init_info = lk201_info,
+ .rx_char = NULL,
+ .poll_rx_char = NULL,
+ .poll_tx_char = NULL,
+- .cflags = B4800 | CS8 | CSTOPB | CLOCAL
++ .cflags = B4800 | CS8 | CSTOPB | CLOCAL,
+ };
+
+ /*
+@@ -93,28 +94,28 @@
+ LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
+ };
+
+-static struct dec_serial* lk201kbd_info;
++static void *lk201_handle;
+
+-static int lk201_send(struct dec_serial *info, unsigned char ch)
++static int lk201_send(unsigned char ch)
+ {
+- if (info->hook->poll_tx_char(info, ch)) {
++ if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
+ printk(KERN_ERR "lk201: transmit timeout\n");
+ return -EIO;
+ }
return 0;
}
-@@ -1446,7 +1428,8 @@
- static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+-static inline int lk201_get_id(struct dec_serial *info)
++static inline int lk201_get_id(void)
{
- struct dec_serial *info = (struct dec_serial *) tty->driver_data;
-- unsigned long orig_jiffies, char_time;
-+ unsigned long orig_jiffies;
-+ int char_time;
+- return lk201_send(info, LK_CMD_REQ_ID);
++ return lk201_send(LK_CMD_REQ_ID);
+ }
- if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
- return;
-@@ -1462,7 +1445,7 @@
- if (char_time == 0)
- char_time = 1;
- if (timeout)
-- char_time = MIN(char_time, timeout);
-+ char_time = min(char_time, timeout);
- while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(char_time);
-@@ -1714,7 +1697,7 @@
+-static int lk201_reset(struct dec_serial *info)
++static int lk201_reset(void)
+ {
+ int i, r;
- static void __init show_serial_version(void)
+ for (i = 0; i < sizeof(lk201_reset_string); i++) {
+- r = lk201_send(info, lk201_reset_string[i]);
++ r = lk201_send(lk201_reset_string[i]);
+ if (r < 0)
+ return r;
+ }
+@@ -203,24 +204,26 @@
+
+ static int write_kbd_rate(struct kbd_repeat *rep)
{
-- printk("DECstation Z8530 serial driver version 0.08\n");
-+ printk("DECstation Z8530 serial driver version 0.09\n");
+- struct dec_serial* info = lk201kbd_info;
+ int delay, rate;
+ int i;
+
+ delay = rep->delay / 5;
+ rate = rep->rate;
+ for (i = 0; i < 4; i++) {
+- if (info->hook->poll_tx_char(info, LK_CMD_RPT_RATE(i)))
++ if (lk201_hook.poll_tx_char(lk201_handle,
++ LK_CMD_RPT_RATE(i)))
+ return 1;
+- if (info->hook->poll_tx_char(info, LK_PARAM_DELAY(delay)))
++ if (lk201_hook.poll_tx_char(lk201_handle,
++ LK_PARAM_DELAY(delay)))
+ return 1;
+- if (info->hook->poll_tx_char(info, LK_PARAM_RATE(rate)))
++ if (lk201_hook.poll_tx_char(lk201_handle,
++ LK_PARAM_RATE(rate)))
+ return 1;
+ }
+ return 0;
}
- /* Initialize Z8530s zs_channels
-@@ -1994,8 +1977,9 @@
- * polling I/O routines
- */
- static int
--zs_poll_tx_char(struct dec_serial *info, unsigned char ch)
-+zs_poll_tx_char(void *handle, unsigned char ch)
+-static int lk201kbd_rate(struct kbd_repeat *rep)
++static int lk201_kbd_rate(struct kbd_repeat *rep)
{
-+ struct dec_serial *info = handle;
- struct dec_zschannel *chan = info->zs_channel;
- int ret;
-
-@@ -2017,8 +2001,9 @@
+ if (rep == NULL)
+ return -EINVAL;
+@@ -237,10 +240,8 @@
+ return 0;
}
- static int
--zs_poll_rx_char(struct dec_serial *info)
-+zs_poll_rx_char(void *handle)
+-static void lk201kd_mksound(unsigned int hz, unsigned int ticks)
++static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
{
-+ struct dec_serial *info = handle;
- struct dec_zschannel *chan = info->zs_channel;
- int ret;
+- struct dec_serial* info = lk201kbd_info;
+-
+ if (!ticks)
+ return;
-@@ -2038,12 +2023,13 @@
- return -ENODEV;
+@@ -253,20 +254,19 @@
+ ticks = 7;
+ ticks = 7 - ticks;
+
+- if (info->hook->poll_tx_char(info, LK_CMD_ENB_BELL))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
+ return;
+- if (info->hook->poll_tx_char(info, LK_PARAM_VOLUME(ticks)))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
+ return;
+- if (info->hook->poll_tx_char(info, LK_CMD_BELL))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
+ return;
}
--unsigned int register_zs_hook(unsigned int channel, struct zs_hook *hook)
-+int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook)
+ void kbd_leds(unsigned char leds)
{
- struct dec_serial *info = &zs_soft[channel];
+- struct dec_serial* info = lk201kbd_info;
+ unsigned char l = 0;
- if (info->hook) {
-- printk(__FUNCTION__": line %d has already a hook registered\n", channel);
-+ printk("%s: line %d has already a hook registered\n",
-+ __FUNCTION__, channel);
+- if (!info) /* FIXME */
++ if (!lk201_handle) /* FIXME */
+ return;
- return 0;
- } else {
-@@ -2055,7 +2041,7 @@
- }
+ /* FIXME -- Only Hold and Lock LEDs for now. --macro */
+@@ -275,13 +275,13 @@
+ if (leds & LED_CAP)
+ l |= LK_LED_LOCK;
+
+- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_ON))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
+ return;
+- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(l)))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
+ return;
+- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_OFF))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
+ return;
+- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(~l)))
++ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
+ return;
+ }
+
+@@ -307,7 +307,7 @@
+ return 0x80;
}
--unsigned int unregister_zs_hook(unsigned int channel)
-+int unregister_zs_hook(unsigned int channel)
+-static void lk201_kbd_rx_char(unsigned char ch, unsigned char stat)
++static void lk201_rx_char(unsigned char ch, unsigned char fl)
{
- struct dec_serial *info = &zs_soft[channel];
+ static unsigned char id[6];
+ static int id_i;
+@@ -316,9 +316,8 @@
+ static int prev_scancode;
+ unsigned char c = scancodeRemap[ch];
-@@ -2063,8 +2049,8 @@
- info->hook = NULL;
- return 1;
- } else {
-- printk(__FUNCTION__": trying to unregister hook on line %d,"
-- " but none is registered\n", channel);
-+ printk("%s: trying to unregister hook on line %d,"
-+ " but none is registered\n", __FUNCTION__, channel);
- return 0;
- }
- }
-@@ -2319,22 +2305,23 @@
- write_zsreg(chan, 9, nine);
- }
+- if (stat && stat != TTY_OVERRUN) {
+- printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n",
+- stat);
++ if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
++ printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
+ return;
+ }
--static int kgdbhook_init_channel(struct dec_serial* info)
-+static int kgdbhook_init_channel(void *handle)
- {
- return 0;
+@@ -335,7 +334,7 @@
+ /* OK, the power-up concluded. */
+ lk201_report(id);
+ if (id[2] == LK_STAT_PWRUP_OK)
+- lk201_get_id(lk201kbd_info);
++ lk201_get_id();
+ else {
+ id_i = 0;
+ printk(KERN_ERR "lk201: keyboard power-up "
+@@ -345,7 +344,7 @@
+ /* We got the ID; report it and start operation. */
+ id_i = 0;
+ lk201_id(id);
+- lk201_reset(lk201kbd_info);
++ lk201_reset();
+ }
+ return;
+ }
+@@ -398,29 +397,28 @@
+ tasklet_schedule(&keyboard_tasklet);
}
--static void kgdbhook_init_info(struct dec_serial* info)
-+static void kgdbhook_init_info(void *handle)
+-static void __init lk201_info(struct dec_serial *info)
++static void __init lk201_info(void *handle)
{
}
--static void kgdbhook_rx_char(struct dec_serial* info,
-- unsigned char ch, unsigned char stat)
-+static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl)
+-static int __init lk201_init(struct dec_serial *info)
++static int __init lk201_init(void *handle)
{
-+ struct dec_serial *info = handle;
-+
-+ if (fl != TTY_NORMAL)
-+ return;
- if (ch == 0x03 || ch == '$')
- breakpoint();
-- if (stat & (Rx_OVR|FRM_ERR|PAR_ERR))
-- write_zsreg(info->zs_channel, 0, ERR_RES);
- }
+ /* First install handlers. */
+- lk201kbd_info = info;
+- kbd_rate = lk201kbd_rate;
+- kd_mksound = lk201kd_mksound;
++ lk201_handle = handle;
++ kbd_rate = lk201_kbd_rate;
++ kd_mksound = lk201_kd_mksound;
- /* This sets up the serial port we're using, and turns on
-@@ -2360,11 +2347,11 @@
- * for /dev/ttyb which is determined in setup_arch() from the
- * boot command line flags.
- */
--struct zs_hook zs_kgdbhook = {
-- init_channel : kgdbhook_init_channel,
-- init_info : kgdbhook_init_info,
-- cflags : B38400|CS8|CLOCAL,
-- rx_char : kgdbhook_rx_char,
-+struct dec_serial_hook zs_kgdbhook = {
-+ .init_channel = kgdbhook_init_channel,
-+ .init_info = kgdbhook_init_info,
-+ .rx_char = kgdbhook_rx_char,
-+ .cflags = B38400 | CS8 | CLOCAL,
- }
+- info->hook->rx_char = lk201_kbd_rx_char;
++ lk201_hook.rx_char = lk201_rx_char;
- void __init zs_kgdb_hook(int tty_num)
-diff -Nur linux-2.4.29/drivers/tc/zs.h linux-mips/drivers/tc/zs.h
---- linux-2.4.29/drivers/tc/zs.h 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/tc/zs.h 2004-07-01 15:28:54.000000000 +0200
-@@ -1,14 +1,18 @@
- /*
-- * macserial.h: Definitions for the Macintosh Z8530 serial driver.
-+ * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver.
- *
- * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
-+ * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen.
- *
- * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-+ * Copyright (C) 2004 Maciej W. Rozycki
- */
- #ifndef _DECSERIAL_H
- #define _DECSERIAL_H
+ /* Then just issue a reset -- the handlers will do the rest. */
+- lk201_send(info, LK_CMD_POWER_UP);
++ lk201_send(LK_CMD_POWER_UP);
-+#include <asm/dec/serial.h>
-+
- #define NUM_ZSREGS 16
+ return 0;
+ }
- struct serial_struct {
-@@ -89,63 +93,50 @@
- unsigned char curregs[NUM_ZSREGS];
- };
+ void __init kbd_init_hw(void)
+ {
+- extern int register_zs_hook(unsigned int, struct zs_hook *);
+- extern int unregister_zs_hook(unsigned int);
++ int keyb_line;
--struct dec_serial;
--
--struct zs_hook {
-- int (*init_channel)(struct dec_serial* info);
-- void (*init_info)(struct dec_serial* info);
-- void (*rx_char)(unsigned char ch, unsigned char stat);
-- int (*poll_rx_char)(struct dec_serial* info);
-- int (*poll_tx_char)(struct dec_serial* info,
-- unsigned char ch);
-- unsigned cflags;
--};
--
- struct dec_serial {
-- struct dec_serial *zs_next; /* For IRQ servicing chain */
-- struct dec_zschannel *zs_channel; /* Channel registers */
-- struct dec_zschannel *zs_chan_a; /* A side registers */
-- unsigned char read_reg_zero;
--
-- char soft_carrier; /* Use soft carrier on this channel */
-- char break_abort; /* Is serial console in, so process brk/abrt */
-- struct zs_hook *hook; /* Hook on this channel */
-- char is_cons; /* Is this our console. */
-- unsigned char tx_active; /* character is being xmitted */
-- unsigned char tx_stopped; /* output is suspended */
--
-- /* We need to know the current clock divisor
-- * to read the bps rate the chip has currently
-- * loaded.
-+ struct dec_serial *zs_next; /* For IRQ servicing chain. */
-+ struct dec_zschannel *zs_channel; /* Channel registers. */
-+ struct dec_zschannel *zs_chan_a; /* A side registers. */
-+ unsigned char read_reg_zero;
-+
-+ struct dec_serial_hook *hook; /* Hook on this channel. */
-+ int tty_break; /* Set on BREAK condition. */
-+ int is_cons; /* Is this our console. */
-+ int tx_active; /* Char is being xmitted. */
-+ int tx_stopped; /* Output is suspended. */
-+
-+ /*
-+ * We need to know the current clock divisor
-+ * to read the bps rate the chip has currently loaded.
- */
-- unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
-- int zs_baud;
-+ int clk_divisor; /* May be 1, 16, 32, or 64. */
-+ int zs_baud;
+ /* Maxine uses LK501 at the Access.Bus. */
+ if (!LK_IFACE)
+@@ -428,19 +426,15 @@
-- char change_needed;
-+ char change_needed;
+ printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
- int magic;
- int baud_base;
- int port;
- int irq;
-- int flags; /* defined in tty.h */
-- int type; /* UART type */
-+ int flags; /* Defined in tty.h. */
-+ int type; /* UART type. */
- struct tty_struct *tty;
- int read_status_mask;
- int ignore_status_mask;
- int timeout;
- int xmit_fifo_size;
- int custom_divisor;
-- int x_char; /* xon/xoff character */
-+ int x_char; /* XON/XOFF character. */
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- unsigned long last_active;
- int line;
-- int count; /* # of fd on device */
-- int blocked_open; /* # of blocked opens */
-- long session; /* Session of opening process */
-- long pgrp; /* pgrp of opening process */
-+ int count; /* # of fds on device. */
-+ int blocked_open; /* # of blocked opens. */
-+ long session; /* Sess of opening process. */
-+ long pgrp; /* Pgrp of opening process. */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
-diff -Nur linux-2.4.29/drivers/usb/devio.c linux-mips/drivers/usb/devio.c
---- linux-2.4.29/drivers/usb/devio.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/usb/devio.c 2005-03-26 11:47:35.208873156 +0100
-@@ -1132,6 +1132,8 @@
- /* ifno might usefully be passed ... */
- retval = driver->ioctl (ps->dev, ctrl.ioctl_code, buf);
- /* size = min_t(int, size, retval)? */
-+ if (retval == -ENOIOCTLCMD)
-+ retval = -ENOTTY;
- }
- }
+- if (LK_IFACE_ZS) {
+- /*
+- * kbd_init_hw() is being called before
+- * rs_init() so just register the kbd hook
+- * and let zs_init do the rest :-)
+- */
+- if(!register_zs_hook(KEYB_LINE, &lk201_kbdhook))
+- unregister_zs_hook(KEYB_LINE);
+- } else {
+- /*
+- * TODO: modify dz.c to allow similar hooks
+- * for LK201 handling on DS2100, DS3100, and DS5000/200
+- */
+- printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
+- }
++ /*
++ * kbd_init_hw() is being called before
++ * rs_init() so just register the kbd hook
++ * and let zs_init do the rest :-)
++ */
++ if (LK_IFACE_ZS)
++ keyb_line = KEYB_LINE_ZS;
++ else
++ keyb_line = KEYB_LINE_DZ;
++ if (!register_dec_serial_hook(keyb_line, &lk201_hook))
++ unregister_dec_serial_hook(keyb_line);
+ }
+diff -Nur linux-2.4.29/drivers/tc/zs.c linux-mips/drivers/tc/zs.c
+--- linux-2.4.29/drivers/tc/zs.c 2005-01-19 15:10:05.000000000 +0100
++++ linux-mips/drivers/tc/zs.c 2004-12-27 05:13:50.000000000 +0100
+@@ -68,6 +68,8 @@
+ #include <asm/bitops.h>
+ #include <asm/uaccess.h>
+ #include <asm/bootinfo.h>
++#include <asm/dec/serial.h>
++
+ #ifdef CONFIG_DECSTATION
+ #include <asm/dec/interrupts.h>
+ #include <asm/dec/machtype.h>
+@@ -160,8 +162,8 @@
+ #ifdef CONFIG_SERIAL_DEC_CONSOLE
+ static struct console sercons;
+ #endif
+-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \
+- && !defined(MODULE)
++#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
++ !defined(MODULE)
+ static unsigned long break_pressed; /* break, really ... */
+ #endif
-@@ -1146,24 +1148,10 @@
- return retval;
- }
+@@ -196,7 +198,6 @@
+ /*
+ * Debugging.
+ */
+-#undef SERIAL_DEBUG_INTR
+ #undef SERIAL_DEBUG_OPEN
+ #undef SERIAL_DEBUG_FLOW
+ #undef SERIAL_DEBUG_THROTTLE
+@@ -221,10 +222,6 @@
+ static struct termios *serial_termios[NUM_CHANNELS];
+ static struct termios *serial_termios_locked[NUM_CHANNELS];
--static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+static int usbdev_ioctl_exclusive(struct dev_state *ps, struct inode *inode,
-+ unsigned int cmd, unsigned long arg)
- {
-- struct dev_state *ps = (struct dev_state *)file->private_data;
-- int ret = -ENOIOCTLCMD;
+-#ifndef MIN
+-#define MIN(a,b) ((a) < (b) ? (a) : (b))
+-#endif
-
-- if (!(file->f_mode & FMODE_WRITE))
-- return -EPERM;
-- down_read(&ps->devsem);
-- if (!ps->dev) {
-- up_read(&ps->devsem);
-- return -ENODEV;
-- }
+ /*
+ * tmp_buf is used as a temporary buffer by serial_write. We need to
+ * lock it in case the copy_from_user blocks while swapping in a page,
+@@ -386,8 +383,6 @@
+ * -----------------------------------------------------------------------
+ */
+
+-static int tty_break; /* Set whenever BREAK condition is detected. */
-
-- /*
-- * grab device's exclusive_access mutex to prevent its driver from
-- * using this device while it is being accessed by us.
-- */
-- down(&ps->dev->exclusive_access);
-+ int ret;
+ /*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver.
+@@ -414,20 +409,15 @@
+ if (!tty && (!info->hook || !info->hook->rx_char))
+ continue;
- switch (cmd) {
- case USBDEVFS_CONTROL:
-@@ -1194,14 +1182,6 @@
- inode->i_mtime = CURRENT_TIME;
- break;
+- if (tty_break) {
+- tty_break = 0;
+-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
+- if (info->line == sercons.index) {
+- if (!break_pressed) {
+- break_pressed = jiffies;
+- goto ignore_char;
+- }
+- break_pressed = 0;
+- }
+-#endif
++ flag = TTY_NORMAL;
++ if (info->tty_break) {
++ info->tty_break = 0;
+ flag = TTY_BREAK;
+ if (info->flags & ZILOG_SAK)
+ do_SAK(tty);
++ /* Ignore the null char got when BREAK is removed. */
++ if (ch == 0)
++ continue;
+ } else {
+ if (stat & Rx_OVR) {
+ flag = TTY_OVERRUN;
+@@ -435,20 +425,22 @@
+ flag = TTY_FRAME;
+ } else if (stat & PAR_ERR) {
+ flag = TTY_PARITY;
+- } else
+- flag = 0;
+- if (flag)
++ }
++ if (flag != TTY_NORMAL)
+ /* reset the error indication */
+ write_zsreg(info->zs_channel, R0, ERR_RES);
+ }
-- case USBDEVFS_GETDRIVER:
-- ret = proc_getdriver(ps, (void *)arg);
-- break;
--
-- case USBDEVFS_CONNECTINFO:
-- ret = proc_connectinfo(ps, (void *)arg);
-- break;
+-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
++#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
++ !defined(MODULE)
+ if (break_pressed && info->line == sercons.index) {
+- if (ch != 0 &&
+- time_before(jiffies, break_pressed + HZ*5)) {
++ /* Ignore the null char got when BREAK is removed. */
++ if (ch == 0)
++ continue;
++ if (time_before(jiffies, break_pressed + HZ * 5)) {
+ handle_sysrq(ch, regs, NULL, NULL);
+ break_pressed = 0;
+- goto ignore_char;
++ continue;
+ }
+ break_pressed = 0;
+ }
+@@ -459,23 +451,7 @@
+ return;
+ }
+
+- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+- static int flip_buf_ovf;
+- ++flip_buf_ovf;
+- continue;
+- }
+- tty->flip.count++;
+- {
+- static int flip_max_cnt;
+- if (flip_max_cnt < tty->flip.count)
+- flip_max_cnt = tty->flip.count;
+- }
-
- case USBDEVFS_SETINTERFACE:
- ret = proc_setintf(ps, (void *)arg);
- break;
-@@ -1220,6 +1200,53 @@
- ret = proc_unlinkurb(ps, (void *)arg);
- break;
+- *tty->flip.flag_buf_ptr++ = flag;
+- *tty->flip.char_buf_ptr++ = ch;
+-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
+- ignore_char:
+-#endif
++ tty_insert_flip_char(tty, ch, flag);
+ }
+ if (tty)
+ tty_flip_buffer_push(tty);
+@@ -517,11 +493,15 @@
+ /* Get status from Read Register 0 */
+ stat = read_zsreg(info->zs_channel, R0);
-+ case USBDEVFS_CLAIMINTERFACE:
-+ ret = proc_claiminterface(ps, (void *)arg);
-+ break;
-+
-+ case USBDEVFS_RELEASEINTERFACE:
-+ ret = proc_releaseinterface(ps, (void *)arg);
-+ break;
-+
-+ case USBDEVFS_IOCTL:
-+ ret = proc_ioctl(ps, (void *) arg);
-+ break;
-+
-+ default:
-+ ret = -ENOTTY;
-+ }
-+ return ret;
-+}
-+
-+static int usbdev_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct dev_state *ps = file->private_data;
-+ int ret;
-+
-+ if (!(file->f_mode & FMODE_WRITE))
-+ return -EPERM;
-+ down_read(&ps->devsem);
-+ if (!ps->dev) {
-+ up_read(&ps->devsem);
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Some ioctls don't touch the device and can be called without
-+ * grabbing its exclusive_access mutex; they are handled in this
-+ * switch. Other ioctls which need exclusive_access are handled in
-+ * usbdev_ioctl_exclusive().
-+ */
-+ switch (cmd) {
-+ case USBDEVFS_GETDRIVER:
-+ ret = proc_getdriver(ps, (void *)arg);
-+ break;
-+
-+ case USBDEVFS_CONNECTINFO:
-+ ret = proc_connectinfo(ps, (void *)arg);
-+ break;
-+
- case USBDEVFS_REAPURB:
- ret = proc_reapurb(ps, (void *)arg);
- break;
-@@ -1232,19 +1259,28 @@
- ret = proc_disconnectsignal(ps, (void *)arg);
- break;
+- if (stat & BRK_ABRT) {
+-#ifdef SERIAL_DEBUG_INTR
+- printk("handling break....");
++ if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
++#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
++ !defined(MODULE)
++ if (info->line == sercons.index) {
++ if (!break_pressed)
++ break_pressed = jiffies;
++ } else
+ #endif
+- tty_break = 1;
++ info->tty_break = 1;
+ }
-+ case USBDEVFS_CONTROL:
-+ case USBDEVFS_BULK:
-+ case USBDEVFS_RESETEP:
-+ case USBDEVFS_RESET:
-+ case USBDEVFS_CLEAR_HALT:
-+ case USBDEVFS_SETINTERFACE:
-+ case USBDEVFS_SETCONFIGURATION:
-+ case USBDEVFS_SUBMITURB:
-+ case USBDEVFS_DISCARDURB:
- case USBDEVFS_CLAIMINTERFACE:
-- ret = proc_claiminterface(ps, (void *)arg);
-- break;
--
- case USBDEVFS_RELEASEINTERFACE:
-- ret = proc_releaseinterface(ps, (void *)arg);
-- break;
--
- case USBDEVFS_IOCTL:
-- ret = proc_ioctl(ps, (void *) arg);
-+ ret = -ERESTARTSYS;
-+ if (down_interruptible(&ps->dev->exclusive_access) == 0) {
-+ ret = usbdev_ioctl_exclusive(ps, inode, cmd, arg);
-+ up(&ps->dev->exclusive_access);
-+ }
- break;
-+
-+ default:
-+ ret = -ENOTTY;
+ if (info->zs_channel != info->zs_chan_a) {
+@@ -957,7 +937,7 @@
+ save_flags(flags);
+ while (1) {
+ cli();
+- c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
++ c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0)
+ break;
+@@ -965,7 +945,7 @@
+ if (from_user) {
+ down(&tmp_buf_sem);
+ copy_from_user(tmp_buf, buf, c);
+- c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
++ c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
+ up(&tmp_buf_sem);
+@@ -1282,46 +1262,48 @@
}
-- up(&ps->dev->exclusive_access);
- up_read(&ps->devsem);
- if (ret >= 0)
- inode->i_atime = CURRENT_TIME;
-diff -Nur linux-2.4.29/drivers/usb/hid-core.c linux-mips/drivers/usb/hid-core.c
---- linux-2.4.29/drivers/usb/hid-core.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/usb/hid-core.c 2005-03-26 11:47:35.374845916 +0100
-@@ -1064,18 +1064,31 @@
- static void hid_ctrl(struct urb *urb)
- {
- struct hid_device *hid = urb->context;
-+ unsigned long flags;
- if (urb->status)
- warn("ctrl urb status %d received", urb->status);
+ switch (cmd) {
+- case TIOCMGET:
+- error = verify_area(VERIFY_WRITE, (void *) arg,
+- sizeof(unsigned int));
+- if (error)
+- return error;
+- return get_modem_info(info, (unsigned int *) arg);
+- case TIOCMBIS:
+- case TIOCMBIC:
+- case TIOCMSET:
+- return set_modem_info(info, cmd, (unsigned int *) arg);
+- case TIOCGSERIAL:
+- error = verify_area(VERIFY_WRITE, (void *) arg,
+- sizeof(struct serial_struct));
+- if (error)
+- return error;
+- return get_serial_info(info,
+- (struct serial_struct *) arg);
+- case TIOCSSERIAL:
+- return set_serial_info(info,
+- (struct serial_struct *) arg);
+- case TIOCSERGETLSR: /* Get line status register */
+- error = verify_area(VERIFY_WRITE, (void *) arg,
+- sizeof(unsigned int));
+- if (error)
+- return error;
+- else
+- return get_lsr_info(info, (unsigned int *) arg);
++ case TIOCMGET:
++ error = verify_area(VERIFY_WRITE, (void *)arg,
++ sizeof(unsigned int));
++ if (error)
++ return error;
++ return get_modem_info(info, (unsigned int *)arg);
-+ spin_lock_irqsave(&hid->outlock, flags);
-+
- hid->outtail = (hid->outtail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
+- case TIOCSERGSTRUCT:
+- error = verify_area(VERIFY_WRITE, (void *) arg,
+- sizeof(struct dec_serial));
+- if (error)
+- return error;
+- copy_from_user((struct dec_serial *) arg,
+- info, sizeof(struct dec_serial));
+- return 0;
++ case TIOCMBIS:
++ case TIOCMBIC:
++ case TIOCMSET:
++ return set_modem_info(info, cmd, (unsigned int *)arg);
-- if (hid->outhead != hid->outtail)
-- hid_submit_out(hid);
-+ if (hid->outhead != hid->outtail) {
-+ if (hid_submit_out(hid)) {
-+ clear_bit(HID_OUT_RUNNING, &hid->iofl);
-+ }
-+ spin_unlock_irqrestore(&hid->outlock, flags);
-+ return;
-+ }
+- default:
+- return -ENOIOCTLCMD;
+- }
++ case TIOCGSERIAL:
++ error = verify_area(VERIFY_WRITE, (void *)arg,
++ sizeof(struct serial_struct));
++ if (error)
++ return error;
++ return get_serial_info(info, (struct serial_struct *)arg);
+
-+ clear_bit(HID_OUT_RUNNING, &hid->iofl);
-+ spin_unlock_irqrestore(&hid->outlock, flags);
- }
-
- void hid_write_report(struct hid_device *hid, struct hid_report *report)
- {
-+ unsigned long flags;
++ case TIOCSSERIAL:
++ return set_serial_info(info, (struct serial_struct *)arg);
+
- if (hid->report_enum[report->type].numbered) {
- hid->out[hid->outhead].buffer[0] = report->id;
- hid_output_report(report, hid->out[hid->outhead].buffer + 1);
-@@ -1087,13 +1100,18 @@
-
- hid->out[hid->outhead].dr.wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
-
-+ spin_lock_irqsave(&hid->outlock, flags);
++ case TIOCSERGETLSR: /* Get line status register */
++ error = verify_area(VERIFY_WRITE, (void *)arg,
++ sizeof(unsigned int));
++ if (error)
++ return error;
++ else
++ return get_lsr_info(info, (unsigned int *)arg);
+
- hid->outhead = (hid->outhead + 1) & (HID_CONTROL_FIFO_SIZE - 1);
-
- if (hid->outhead == hid->outtail)
- hid->outtail = (hid->outtail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
-
-- if (hid->urbout.status != -EINPROGRESS)
-- hid_submit_out(hid);
-+ if (!test_and_set_bit(HID_OUT_RUNNING, &hid->iofl))
-+ if (hid_submit_out(hid))
-+ clear_bit(HID_OUT_RUNNING, &hid->iofl);
++ case TIOCSERGSTRUCT:
++ error = verify_area(VERIFY_WRITE, (void *)arg,
++ sizeof(struct dec_serial));
++ if (error)
++ return error;
++ copy_from_user((struct dec_serial *)arg, info,
++ sizeof(struct dec_serial));
++ return 0;
+
-+ spin_unlock_irqrestore(&hid->outlock, flags);
++ default:
++ return -ENOIOCTLCMD;
++ }
+ return 0;
}
- int hid_open(struct hid_device *hid)
-@@ -1333,6 +1351,8 @@
- return NULL;
- }
-
-+ spin_lock_init(&hid->outlock);
-+
- hid->version = hdesc->bcdHID;
- hid->country = hdesc->bCountryCode;
- hid->dev = dev;
-diff -Nur linux-2.4.29/drivers/usb/hiddev.c linux-mips/drivers/usb/hiddev.c
---- linux-2.4.29/drivers/usb/hiddev.c 2004-08-08 01:26:05.000000000 +0200
-+++ linux-mips/drivers/usb/hiddev.c 2005-03-26 11:47:35.743785364 +0100
-@@ -328,6 +328,7 @@
- }
-
- schedule();
-+ set_current_state(TASK_INTERRUPTIBLE);
- }
-
- set_current_state(TASK_RUNNING);
-diff -Nur linux-2.4.29/drivers/usb/hid.h linux-mips/drivers/usb/hid.h
---- linux-2.4.29/drivers/usb/hid.h 2003-08-25 13:44:42.000000000 +0200
-+++ linux-mips/drivers/usb/hid.h 2005-03-26 11:47:35.742785528 +0100
-@@ -302,6 +302,8 @@
- #define HID_CLAIMED_INPUT 1
- #define HID_CLAIMED_HIDDEV 2
-
-+#define HID_OUT_RUNNING 2
-+
- struct hid_input {
- struct list_head list;
- struct hid_report *report;
-@@ -322,12 +324,15 @@
- struct usb_device *dev; /* USB device */
- int ifnum; /* USB interface number */
-
-+ unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
-+
- struct urb urb; /* USB URB structure */
- char buffer[HID_BUFFER_SIZE]; /* Rx buffer */
-
- struct urb urbout; /* Output URB */
- struct hid_control_fifo out[HID_CONTROL_FIFO_SIZE]; /* Transmit buffer */
- unsigned char outhead, outtail; /* Tx buffer head & tail */
-+ spinlock_t outlock; /* Output fifo spinlock */
-
- unsigned claimed; /* Claimed by hidinput, hiddev? */
- unsigned quirks; /* Various quirks the device can pull on us */
-diff -Nur linux-2.4.29/drivers/usb/serial/ftdi_sio.c linux-mips/drivers/usb/serial/ftdi_sio.c
---- linux-2.4.29/drivers/usb/serial/ftdi_sio.c 2005-01-19 15:10:07.000000000 +0100
-+++ linux-mips/drivers/usb/serial/ftdi_sio.c 2005-03-26 11:47:35.754783559 +0100
-@@ -737,8 +737,6 @@
- };
-
-
--
--
- static struct usb_serial_device_type ftdi_userdev_device = {
- .owner = THIS_MODULE,
- .name = "FTDI SIO compatible",
-@@ -1240,15 +1238,6 @@
- } /* ftdi_HE_TIRA1_startup */
+@@ -1446,7 +1428,8 @@
+ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+ {
+ struct dec_serial *info = (struct dec_serial *) tty->driver_data;
+- unsigned long orig_jiffies, char_time;
++ unsigned long orig_jiffies;
++ int char_time;
+ if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
+ return;
+@@ -1462,7 +1445,7 @@
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout)
+- char_time = MIN(char_time, timeout);
++ char_time = min(char_time, timeout);
+ while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(char_time);
+@@ -1714,7 +1697,7 @@
--/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
-- * it is called when the usb device is disconnected
-- *
-- * usbserial:usb_serial_disconnect
-- * calls __serial_close for each open of the port
-- * shutdown is called then (ie ftdi_shutdown)
-- */
--
--
- /* Startup for the 8U232AM chip */
- static int ftdi_userdev_startup (struct usb_serial *serial)
+ static void __init show_serial_version(void)
{
-@@ -1273,6 +1262,14 @@
+- printk("DECstation Z8530 serial driver version 0.08\n");
++ printk("DECstation Z8530 serial driver version 0.09\n");
}
-
-+/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
-+ * it is called when the usb device is disconnected
-+ *
-+ * usbserial:usb_serial_disconnect
-+ * calls __serial_close for each open of the port
-+ * shutdown is called then (ie ftdi_shutdown)
-+ */
-+
- static void ftdi_shutdown (struct usb_serial *serial)
- { /* ftdi_shutdown */
-
-@@ -1382,6 +1379,7 @@
- struct usb_serial *serial;
- unsigned int c_cflag = port->tty->termios->c_cflag;
- char buf[1];
-+ int err;
-
- dbg("%s", __FUNCTION__);
-
-@@ -1412,8 +1410,9 @@
-
- /* shutdown our bulk read */
- if (port->read_urb) {
-- if(usb_unlink_urb (port->read_urb)<0)
-- err("Error unlinking urb");
-+ err = usb_unlink_urb (port->read_urb);
-+ if (err < 0 && err != -ENODEV)
-+ err("Error unlinking urb (%d)", err);
- }
- /* unlink the running write urbs */
-
-diff -Nur linux-2.4.29/drivers/usb/serial/mct_u232.c linux-mips/drivers/usb/serial/mct_u232.c
---- linux-2.4.29/drivers/usb/serial/mct_u232.c 2005-01-19 15:10:08.000000000 +0100
-+++ linux-mips/drivers/usb/serial/mct_u232.c 2005-03-26 11:47:35.755783395 +0100
-@@ -86,26 +86,14 @@
- #include "usb-serial.h"
- #include "mct_u232.h"
-
--
- /*
- * Version Information
+ /* Initialize Z8530s zs_channels
+@@ -1994,8 +1977,9 @@
+ * polling I/O routines
*/
--#define DRIVER_VERSION "v1.2"
-+#define DRIVER_VERSION "z2.0" /* Linux in-kernel version */
- #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
- #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
+ static int
+-zs_poll_tx_char(struct dec_serial *info, unsigned char ch)
++zs_poll_tx_char(void *handle, unsigned char ch)
+ {
++ struct dec_serial *info = handle;
+ struct dec_zschannel *chan = info->zs_channel;
+ int ret;
- /*
-- * Some not properly written applications do not handle the return code of
-- * write() correctly. This can result in character losses. A work-a-round
-- * can be compiled in with the following definition. This work-a-round
-- * should _NOT_ be part of an 'official' kernel release, of course!
-- */
--#undef FIX_WRITE_RETURN_CODE_PROBLEM
--#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
--static int write_blocking; /* disabled by default */
--#endif
--
--/*
- * Function prototypes
- */
- static int mct_u232_startup (struct usb_serial *serial);
-@@ -114,13 +102,6 @@
- struct file *filp);
- static void mct_u232_close (struct usb_serial_port *port,
- struct file *filp);
--#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
--static int mct_u232_write (struct usb_serial_port *port,
-- int from_user,
-- const unsigned char *buf,
-- int count);
--static void mct_u232_write_bulk_callback (struct urb *urb);
--#endif
- static void mct_u232_read_int_callback (struct urb *urb);
- static void mct_u232_set_termios (struct usb_serial_port *port,
- struct termios * old);
-@@ -147,7 +128,7 @@
-
- static struct usb_serial_device_type mct_u232_device = {
- .owner = THIS_MODULE,
-- .name = "Magic Control Technology USB-RS232",
-+ .name = "MCT U232",
- .id_table = id_table_combined,
- .num_interrupt_in = 2,
- .num_bulk_in = 0,
-@@ -155,10 +136,6 @@
- .num_ports = 1,
- .open = mct_u232_open,
- .close = mct_u232_close,
--#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-- .write = mct_u232_write,
-- .write_bulk_callback = mct_u232_write_bulk_callback,
--#endif
- .read_int_callback = mct_u232_read_int_callback,
- .ioctl = mct_u232_ioctl,
- .set_termios = mct_u232_set_termios,
-@@ -167,9 +144,14 @@
- .shutdown = mct_u232_shutdown,
- };
+@@ -2017,8 +2001,9 @@
+ }
-+struct mct_u232_interval_kludge {
-+ int ecnt; /* Error counter */
-+ int ibase; /* Initial interval value */
-+};
+ static int
+-zs_poll_rx_char(struct dec_serial *info)
++zs_poll_rx_char(void *handle)
+ {
++ struct dec_serial *info = handle;
+ struct dec_zschannel *chan = info->zs_channel;
+ int ret;
- struct mct_u232_private {
- spinlock_t lock;
-+ struct mct_u232_interval_kludge ik[2];
- unsigned int control_state; /* Modem Line Setting (TIOCM) */
- unsigned char last_lcr; /* Line Control Register */
- unsigned char last_lsr; /* Line Status Register */
-@@ -359,17 +341,13 @@
- struct mct_u232_private *priv;
- struct usb_serial_port *port, *rport;
-
-- /* allocate the private data structure */
- priv = kmalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-- /* set initial values for control structures */
-+ memset(priv, 0, sizeof(struct mct_u232_private));
- spin_lock_init(&priv->lock);
-- priv->control_state = 0;
-- priv->last_lsr = 0;
-- priv->last_msr = 0;
- serial->port->private = priv;
--
-+
- init_waitqueue_head(&serial->port->write_wait);
+@@ -2038,12 +2023,13 @@
+ return -ENODEV;
+ }
- /* Puh, that's dirty */
-@@ -383,20 +361,27 @@
- rport->interrupt_in_urb = NULL;
- port->read_urb->context = port;
+-unsigned int register_zs_hook(unsigned int channel, struct zs_hook *hook)
++int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook)
+ {
+ struct dec_serial *info = &zs_soft[channel];
-+ priv->ik[0].ibase = port->read_urb->interval;
-+ priv->ik[1].ibase = port->interrupt_in_urb->interval;
-+
- return (0);
- } /* mct_u232_startup */
+ if (info->hook) {
+- printk(__FUNCTION__": line %d has already a hook registered\n", channel);
++ printk("%s: line %d has already a hook registered\n",
++ __FUNCTION__, channel);
+ return 0;
+ } else {
+@@ -2055,7 +2041,7 @@
+ }
+ }
- static void mct_u232_shutdown (struct usb_serial *serial)
+-unsigned int unregister_zs_hook(unsigned int channel)
++int unregister_zs_hook(unsigned int channel)
{
-+ struct mct_u232_private *priv;
- int i;
-
- dbg("%s", __FUNCTION__);
-
- for (i=0; i < serial->num_ports; ++i) {
- /* My special items, the standard routines free my urbs */
-- if (serial->port[i].private)
-- kfree(serial->port[i].private);
-+ priv = serial->port[i].private;
-+ if (priv) {
-+ serial->port[i].private = NULL;
-+ kfree(priv);
-+ }
- }
- } /* mct_u232_shutdown */
-
-@@ -448,16 +433,20 @@
- spin_unlock_irqrestore(&priv->lock, flags);
-
- port->read_urb->dev = port->serial->dev;
-+ port->read_urb->interval = priv->ik[0].ibase;
- retval = usb_submit_urb(port->read_urb);
- if (retval) {
-- err("usb_submit_urb(read bulk) failed");
-+ err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
-+ port->read_urb->pipe, retval);
- goto exit;
- }
+ struct dec_serial *info = &zs_soft[channel];
- port->interrupt_in_urb->dev = port->serial->dev;
-+ port->interrupt_in_urb->interval = priv->ik[1].ibase;
- retval = usb_submit_urb(port->interrupt_in_urb);
- if (retval)
-- err(" usb_submit_urb(read int) failed");
-+ err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
-+ port->interrupt_in_urb->pipe, retval);
+@@ -2063,8 +2049,8 @@
+ info->hook = NULL;
+ return 1;
+ } else {
+- printk(__FUNCTION__": trying to unregister hook on line %d,"
+- " but none is registered\n", channel);
++ printk("%s: trying to unregister hook on line %d,"
++ " but none is registered\n", __FUNCTION__, channel);
+ return 0;
+ }
+ }
+@@ -2319,22 +2305,23 @@
+ write_zsreg(chan, 9, nine);
+ }
- exit:
+-static int kgdbhook_init_channel(struct dec_serial* info)
++static int kgdbhook_init_channel(void *handle)
+ {
return 0;
-@@ -476,109 +465,22 @@
- }
- } /* mct_u232_close */
+ }
--
--#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
--/* The generic routines work fine otherwise */
--
--static int mct_u232_write (struct usb_serial_port *port, int from_user,
-- const unsigned char *buf, int count)
-+static void mct_u232_error_step (struct urb *urb,
-+ struct mct_u232_private *priv, int n)
+-static void kgdbhook_init_info(struct dec_serial* info)
++static void kgdbhook_init_info(void *handle)
{
-- struct usb_serial *serial = port->serial;
-- int result, bytes_sent, size;
--
-- dbg("%s - port %d", __FUNCTION__, port->number);
--
-- if (count == 0) {
-- dbg("%s - write request of 0 bytes", __FUNCTION__);
-- return (0);
-- }
--
-- /* only do something if we have a bulk out endpoint */
-- if (!serial->num_bulk_out)
-- return(0);;
--
-- /* another write is still pending? */
-- if (port->write_urb->status == -EINPROGRESS) {
-- dbg("%s - already writing", __FUNCTION__);
-- return (0);
-- }
--
-- bytes_sent = 0;
-- while (count > 0) {
-- size = (count > port->bulk_out_size) ? port->bulk_out_size : count;
--
-- usb_serial_debug_data (__FILE__, __FUNCTION__, size, buf);
--
-- if (from_user) {
-- if (copy_from_user(port->write_urb->transfer_buffer, buf, size)) {
-- return -EFAULT;
-- }
-- }
-- else {
-- memcpy (port->write_urb->transfer_buffer, buf, size);
-- }
--
-- /* set up our urb */
-- FILL_BULK_URB(port->write_urb, serial->dev,
-- usb_sndbulkpipe(serial->dev,
-- port->bulk_out_endpointAddress),
-- port->write_urb->transfer_buffer, size,
-- ((serial->type->write_bulk_callback) ?
-- serial->type->write_bulk_callback :
-- mct_u232_write_bulk_callback),
-- port);
--
-- /* send the data out the bulk port */
-- result = usb_submit_urb(port->write_urb);
-- if (result) {
-- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
-- return result;
-- }
--
-- bytes_sent += size;
-- if (write_blocking)
-- interruptible_sleep_on(&port->write_wait);
-- else
-- break;
--
-- buf += size;
-- count -= size;
-- }
--
-- return bytes_sent;
--} /* mct_u232_write */
--
--static void mct_u232_write_bulk_callback (struct urb *urb)
--{
-- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-- struct usb_serial *serial = port->serial;
-- struct tty_struct *tty = port->tty;
--
-- dbg("%s - port %d", __FUNCTION__, port->number);
--
-- if (!serial) {
-- dbg("%s - bad serial pointer, exiting", __FUNCTION__);
-- return;
-- }
-+ struct mct_u232_interval_kludge *ikp = &priv->ik[n];
-
-- if (urb->status) {
-- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
-- urb->status);
-- return;
-- }
--
-- if (write_blocking) {
-- wake_up_interruptible(&port->write_wait);
-- tty_wakeup(tty);
-+ if (ikp->ecnt >= 2) {
-+ if (urb->interval)
-+ err("%s - too many errors: "
-+ "status %d pipe 0x%x interval %d",
-+ __FUNCTION__,
-+ urb->status, urb->pipe, urb->interval);
-+ urb->interval = 0;
- } else {
-- /* from generic_write_bulk_callback */
-- queue_task(&port->tqueue, &tq_immediate);
-- mark_bh(IMMEDIATE_BH);
-+ ++ikp->ecnt;
- }
--
-- return;
--} /* mct_u232_write_bulk_callback */
--#endif
-+}
+ }
- static void mct_u232_read_int_callback (struct urb *urb)
+-static void kgdbhook_rx_char(struct dec_serial* info,
+- unsigned char ch, unsigned char stat)
++static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl)
{
-@@ -589,21 +491,37 @@
- unsigned char *data = urb->transfer_buffer;
- unsigned long flags;
-
-- dbg("%s - port %d", __FUNCTION__, port->number);
--
- /* The urb might have been killed. */
- if (urb->status) {
-- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__,
-- urb->status);
-+ dbg("%s - nonzero status %d, pipe 0x%x flags 0x%x interval %d",
-+ __FUNCTION__,
-+ urb->status, urb->pipe, urb->transfer_flags, urb->interval);
-+ /*
-+ * The bad stuff happens when a device is disconnected.
-+ * This can cause us to spin while trying to resubmit.
-+ * Unfortunately, in kernel 2.4 error codes are wildly
-+ * different between controllers, so the status is useless.
-+ * Instead we just refuse to spin too much.
-+ */
-+ if (urb == port->read_urb)
-+ mct_u232_error_step(urb, priv, 0);
-+ if (urb == port->interrupt_in_urb)
-+ mct_u232_error_step(urb, priv, 1);
- return;
- }
- if (!serial) {
- dbg("%s - bad serial pointer, exiting", __FUNCTION__);
- return;
- }
--
++ struct dec_serial *info = handle;
+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
- usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
++ if (fl != TTY_NORMAL)
++ return;
+ if (ch == 0x03 || ch == '$')
+ breakpoint();
+- if (stat & (Rx_OVR|FRM_ERR|PAR_ERR))
+- write_zsreg(info->zs_channel, 0, ERR_RES);
+ }
+
+ /* This sets up the serial port we're using, and turns on
+@@ -2360,11 +2347,11 @@
+ * for /dev/ttyb which is determined in setup_arch() from the
+ * boot command line flags.
+ */
+-struct zs_hook zs_kgdbhook = {
+- init_channel : kgdbhook_init_channel,
+- init_info : kgdbhook_init_info,
+- cflags : B38400|CS8|CLOCAL,
+- rx_char : kgdbhook_rx_char,
++struct dec_serial_hook zs_kgdbhook = {
++ .init_channel = kgdbhook_init_channel,
++ .init_info = kgdbhook_init_info,
++ .rx_char = kgdbhook_rx_char,
++ .cflags = B38400 | CS8 | CLOCAL,
+ }
+
+ void __init zs_kgdb_hook(int tty_num)
+diff -Nur linux-2.4.29/drivers/tc/zs.h linux-mips/drivers/tc/zs.h
+--- linux-2.4.29/drivers/tc/zs.h 2004-02-18 14:36:31.000000000 +0100
++++ linux-mips/drivers/tc/zs.h 2004-07-01 15:28:54.000000000 +0200
+@@ -1,14 +1,18 @@
+ /*
+- * macserial.h: Definitions for the Macintosh Z8530 serial driver.
++ * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver.
+ *
+ * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
++ * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen.
+ *
+ * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
++ * Copyright (C) 2004 Maciej W. Rozycki
+ */
+ #ifndef _DECSERIAL_H
+ #define _DECSERIAL_H
-+ if (urb == port->read_urb)
-+ priv->ik[0].ecnt = 0;
-+ if (urb == port->interrupt_in_urb)
-+ priv->ik[1].ecnt = 0;
++#include <asm/dec/serial.h>
+
- /*
- * Work-a-round: handle the 'usual' bulk-in pipe here
- */
-@@ -660,7 +578,6 @@
- /* INT urbs are automatically re-submitted */
- } /* mct_u232_read_int_callback */
-
--
- static void mct_u232_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
- {
-@@ -781,6 +698,21 @@
- } /* mct_u232_break_ctl */
+ #define NUM_ZSREGS 16
+ struct serial_struct {
+@@ -89,63 +93,50 @@
+ unsigned char curregs[NUM_ZSREGS];
+ };
-+static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file)
-+{
-+ struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
-+ unsigned int control_state;
-+ unsigned long flags;
-+
-+ dbg("%s", __FUNCTION__);
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ control_state = priv->control_state;
-+ spin_unlock_irqrestore(&priv->lock, flags);
+-struct dec_serial;
+-
+-struct zs_hook {
+- int (*init_channel)(struct dec_serial* info);
+- void (*init_info)(struct dec_serial* info);
+- void (*rx_char)(unsigned char ch, unsigned char stat);
+- int (*poll_rx_char)(struct dec_serial* info);
+- int (*poll_tx_char)(struct dec_serial* info,
+- unsigned char ch);
+- unsigned cflags;
+-};
+-
+ struct dec_serial {
+- struct dec_serial *zs_next; /* For IRQ servicing chain */
+- struct dec_zschannel *zs_channel; /* Channel registers */
+- struct dec_zschannel *zs_chan_a; /* A side registers */
+- unsigned char read_reg_zero;
+-
+- char soft_carrier; /* Use soft carrier on this channel */
+- char break_abort; /* Is serial console in, so process brk/abrt */
+- struct zs_hook *hook; /* Hook on this channel */
+- char is_cons; /* Is this our console. */
+- unsigned char tx_active; /* character is being xmitted */
+- unsigned char tx_stopped; /* output is suspended */
+-
+- /* We need to know the current clock divisor
+- * to read the bps rate the chip has currently
+- * loaded.
++ struct dec_serial *zs_next; /* For IRQ servicing chain. */
++ struct dec_zschannel *zs_channel; /* Channel registers. */
++ struct dec_zschannel *zs_chan_a; /* A side registers. */
++ unsigned char read_reg_zero;
+
-+ return control_state;
-+}
++ struct dec_serial_hook *hook; /* Hook on this channel. */
++ int tty_break; /* Set on BREAK condition. */
++ int is_cons; /* Is this our console. */
++ int tx_active; /* Char is being xmitted. */
++ int tx_stopped; /* Output is suspended. */
+
- static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
- unsigned int cmd, unsigned long arg)
- {
-@@ -794,8 +726,8 @@
- /* Based on code from acm.c and others */
- switch (cmd) {
- case TIOCMGET:
-- return put_user(priv->control_state, (unsigned long *) arg);
-- break;
-+ mask = mct_u232_tiocmget(port, file);
-+ return put_user(mask, (unsigned long *) arg);
-
- case TIOCMSET: /* Turns on and off the lines as specified by the mask */
- case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */
-@@ -865,12 +797,5 @@
- MODULE_DESCRIPTION( DRIVER_DESC );
- MODULE_LICENSE("GPL");
++ /*
++ * We need to know the current clock divisor
++ * to read the bps rate the chip has currently loaded.
+ */
+- unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
+- int zs_baud;
++ int clk_divisor; /* May be 1, 16, 32, or 64. */
++ int zs_baud;
--#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
--MODULE_PARM(write_blocking, "i");
--MODULE_PARM_DESC(write_blocking,
-- "The write function will block to write out all data");
--#endif
--
- MODULE_PARM(debug, "i");
- MODULE_PARM_DESC(debug, "Debug enabled or not");
--
-diff -Nur linux-2.4.29/drivers/usb/storage/transport.c linux-mips/drivers/usb/storage/transport.c
---- linux-2.4.29/drivers/usb/storage/transport.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/usb/storage/transport.c 2005-03-26 11:47:35.757783067 +0100
-@@ -1181,6 +1181,13 @@
-
- /* if the command transfered well, then we go to the data stage */
- if (result == 0) {
-+
-+ /* Genesys Logic interface chips need a 100us delay between
-+ * the command phase and the data phase. Some systems need
-+ * even more, probably because of clock rate inaccuracies. */
-+ if (us->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS)
-+ udelay(110);
-+
- /* send/receive data payload, if there is any */
- if (bcb->DataTransferLength) {
- usb_stor_transfer(srb, us);
-diff -Nur linux-2.4.29/drivers/usb/storage/usb.c linux-mips/drivers/usb/storage/usb.c
---- linux-2.4.29/drivers/usb/storage/usb.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/drivers/usb/storage/usb.c 2005-03-26 11:47:35.758782903 +0100
-@@ -996,6 +996,15 @@
- */
- ss->htmplt.proc_dir = (void *)ss;
+- char change_needed;
++ char change_needed;
-+ /* According to the technical support people at Genesys Logic,
-+ * devices using their chips have problems transferring more
-+ * than 32 KB at a time. In practice people have found that
-+ * 64 KB works okay and that's what Windows does. But we'll
-+ * be conservative.
-+ */
-+ if (ss->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS)
-+ ss->htmplt.max_sectors = 64;
-+
- /* Just before we start our control thread, initialize
- * the device if it needs initialization */
- if (unusual_dev && unusual_dev->initFunction)
-diff -Nur linux-2.4.29/drivers/usb/storage/usb.h linux-mips/drivers/usb/storage/usb.h
---- linux-2.4.29/drivers/usb/storage/usb.h 2004-08-08 01:26:05.000000000 +0200
-+++ linux-mips/drivers/usb/storage/usb.h 2005-03-26 11:47:35.759782739 +0100
-@@ -193,4 +193,7 @@
- /* Function to fill an inquiry response. See usb.c for details */
- extern void fill_inquiry_response(struct us_data *us,
- unsigned char *data, unsigned int data_len);
-+
-+/* Vendor ID list for devices that require special handling */
-+#define USB_VENDOR_ID_GENESYS 0x05e3 /* Genesys Logic */
- #endif
+ int magic;
+ int baud_base;
+ int port;
+ int irq;
+- int flags; /* defined in tty.h */
+- int type; /* UART type */
++ int flags; /* Defined in tty.h. */
++ int type; /* UART type. */
+ struct tty_struct *tty;
+ int read_status_mask;
+ int ignore_status_mask;
+ int timeout;
+ int xmit_fifo_size;
+ int custom_divisor;
+- int x_char; /* xon/xoff character */
++ int x_char; /* XON/XOFF character. */
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned short closing_wait2;
+ unsigned long event;
+ unsigned long last_active;
+ int line;
+- int count; /* # of fd on device */
+- int blocked_open; /* # of blocked opens */
+- long session; /* Session of opening process */
+- long pgrp; /* pgrp of opening process */
++ int count; /* # of fds on device. */
++ int blocked_open; /* # of blocked opens. */
++ long session; /* Sess of opening process. */
++ long pgrp; /* Pgrp of opening process. */
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
diff -Nur linux-2.4.29/drivers/video/au1200fb.c linux-mips/drivers/video/au1200fb.c
--- linux-2.4.29/drivers/video/au1200fb.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-mips/drivers/video/au1200fb.c 2005-03-13 09:04:16.000000000 +0100
+#endif /* _AU1200LCD_H */
diff -Nur linux-2.4.29/drivers/video/Config.in linux-mips/drivers/video/Config.in
--- linux-2.4.29/drivers/video/Config.in 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/video/Config.in 2005-03-26 11:47:35.761782411 +0100
++++ linux-mips/drivers/video/Config.in 2005-02-11 22:16:44.000000000 +0100
@@ -87,8 +87,8 @@
if [ "$CONFIG_HP300" = "y" ]; then
define_bool CONFIG_FB_HP300 y
fi
diff -Nur linux-2.4.29/drivers/video/fbmem.c linux-mips/drivers/video/fbmem.c
--- linux-2.4.29/drivers/video/fbmem.c 2005-01-19 15:10:09.000000000 +0100
-+++ linux-mips/drivers/video/fbmem.c 2005-03-26 11:47:36.031738105 +0100
++++ linux-mips/drivers/video/fbmem.c 2005-02-11 22:16:44.000000000 +0100
@@ -139,6 +139,8 @@
extern int e1356fb_setup(char*);
extern int au1100fb_init(void);
+}
diff -Nur linux-2.4.29/drivers/video/Makefile linux-mips/drivers/video/Makefile
--- linux-2.4.29/drivers/video/Makefile 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/drivers/video/Makefile 2005-03-26 11:47:35.762782246 +0100
++++ linux-mips/drivers/video/Makefile 2005-02-11 22:16:44.000000000 +0100
@@ -87,6 +87,7 @@
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_TX3912) += tx3912fb.o
+ /* Executables without an interpreter also need a personality */
+ SET_PERSONALITY(elf_ex, ibcs2_interpreter);
}
-
- /* Flush all traces of the currently running executable */
-@@ -1208,7 +1211,11 @@
- elf.e_entry = 0;
- elf.e_phoff = sizeof(elf);
- elf.e_shoff = 0;
-+#ifdef ELF_CORE_EFLAGS
-+ elf.e_flags = ELF_CORE_EFLAGS;
-+#else
- elf.e_flags = 0;
-+#endif
- elf.e_ehsize = sizeof(elf);
- elf.e_phentsize = sizeof(struct elf_phdr);
- elf.e_phnum = segs+1; /* Include notes */
-diff -Nur linux-2.4.29/fs/ext3/fsync.c linux-mips/fs/ext3/fsync.c
---- linux-2.4.29/fs/ext3/fsync.c 2002-11-29 00:53:15.000000000 +0100
-+++ linux-mips/fs/ext3/fsync.c 2005-03-26 11:47:36.070731705 +0100
-@@ -69,7 +69,7 @@
- if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- ret |= fsync_inode_data_buffers(inode);
-
-- ext3_force_commit(inode->i_sb);
-+ ret |= ext3_force_commit(inode->i_sb);
-
- return ret;
- }
-diff -Nur linux-2.4.29/fs/ext3/super.c linux-mips/fs/ext3/super.c
---- linux-2.4.29/fs/ext3/super.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/fs/ext3/super.c 2005-03-26 11:47:36.071731541 +0100
-@@ -1608,12 +1608,13 @@
-
- static int ext3_sync_fs(struct super_block *sb)
- {
-+ int err;
- tid_t target;
-
- sb->s_dirt = 0;
- target = log_start_commit(EXT3_SB(sb)->s_journal, NULL);
-- log_wait_commit(EXT3_SB(sb)->s_journal, target);
-- return 0;
-+ err = log_wait_commit(EXT3_SB(sb)->s_journal, target);
-+ return err;
- }
-
- /*
-diff -Nur linux-2.4.29/fs/file_table.c linux-mips/fs/file_table.c
---- linux-2.4.29/fs/file_table.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/fs/file_table.c 2005-03-26 11:47:36.063732854 +0100
-@@ -46,6 +46,7 @@
- f->f_version = ++event;
- f->f_uid = current->fsuid;
- f->f_gid = current->fsgid;
-+ f->f_maxcount = INT_MAX;
- list_add(&f->f_list, &anon_list);
- file_list_unlock();
- return f;
-@@ -91,6 +92,8 @@
- filp->f_uid = current->fsuid;
- filp->f_gid = current->fsgid;
- filp->f_op = dentry->d_inode->i_fop;
-+ filp->f_maxcount = INT_MAX;
-+
- if (filp->f_op->open)
- return filp->f_op->open(dentry->d_inode, filp);
- else
-diff -Nur linux-2.4.29/fs/jbd/commit.c linux-mips/fs/jbd/commit.c
---- linux-2.4.29/fs/jbd/commit.c 2004-02-18 14:36:31.000000000 +0100
-+++ linux-mips/fs/jbd/commit.c 2005-03-26 11:47:36.078730392 +0100
-@@ -92,7 +92,7 @@
- struct buffer_head *wbuf[64];
- int bufs;
- int flags;
-- int err;
-+ int err = 0;
- unsigned long blocknr;
- char *tagp = NULL;
- journal_header_t *header;
-@@ -299,6 +299,8 @@
- spin_unlock(&journal_datalist_lock);
- unlock_journal(journal);
- wait_on_buffer(bh);
-+ if (unlikely(!buffer_uptodate(bh)))
-+ err = -EIO;
- /* the journal_head may have been removed now */
- lock_journal(journal);
- goto write_out_data;
-@@ -326,6 +328,8 @@
- spin_unlock(&journal_datalist_lock);
- unlock_journal(journal);
- wait_on_buffer(bh);
-+ if (unlikely(!buffer_uptodate(bh)))
-+ err = -EIO;
- lock_journal(journal);
- spin_lock(&journal_datalist_lock);
- continue; /* List may have changed */
-@@ -351,6 +355,9 @@
- }
- spin_unlock(&journal_datalist_lock);
-
-+ if (err)
-+ __journal_abort_hard(journal);
-+
- /*
- * If we found any dirty or locked buffers, then we should have
- * looped back up to the write_out_data label. If there weren't
-@@ -541,6 +548,8 @@
- if (buffer_locked(bh)) {
- unlock_journal(journal);
- wait_on_buffer(bh);
-+ if (unlikely(!buffer_uptodate(bh)))
-+ err = -EIO;
- lock_journal(journal);
- goto wait_for_iobuf;
- }
-@@ -602,6 +611,8 @@
- if (buffer_locked(bh)) {
- unlock_journal(journal);
- wait_on_buffer(bh);
-+ if (unlikely(!buffer_uptodate(bh)))
-+ err = -EIO;
- lock_journal(journal);
- goto wait_for_ctlbuf;
- }
-@@ -650,6 +661,8 @@
- bh->b_end_io = journal_end_buffer_io_sync;
- submit_bh(WRITE, bh);
- wait_on_buffer(bh);
-+ if (unlikely(!buffer_uptodate(bh)))
-+ err = -EIO;
- put_bh(bh); /* One for getblk() */
- journal_unlock_journal_head(descriptor);
- }
-@@ -661,6 +674,9 @@
-
- skip_commit: /* The journal should be unlocked by now. */
-
-+ if (err)
-+ __journal_abort_hard(journal);
-+
- /* Call any callbacks that had been registered for handles in this
- * transaction. It is up to the callback to free any allocated
- * memory.
-diff -Nur linux-2.4.29/fs/jbd/journal.c linux-mips/fs/jbd/journal.c
---- linux-2.4.29/fs/jbd/journal.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/fs/jbd/journal.c 2005-03-26 11:47:36.079730228 +0100
-@@ -582,8 +582,10 @@
- * Wait for a specified commit to complete.
- * The caller may not hold the journal lock.
- */
--void log_wait_commit (journal_t *journal, tid_t tid)
-+int log_wait_commit (journal_t *journal, tid_t tid)
- {
-+ int err = 0;
-+
- lock_kernel();
- #ifdef CONFIG_JBD_DEBUG
- lock_journal(journal);
-@@ -600,6 +602,12 @@
- sleep_on(&journal->j_wait_done_commit);
- }
- unlock_kernel();
-+
-+ if (unlikely(is_journal_aborted(journal))) {
-+ printk(KERN_EMERG "journal commit I/O error\n");
-+ err = -EIO;
-+ }
-+ return err;
- }
-
- /*
-@@ -1326,7 +1334,7 @@
-
- /* Wait for the log commit to complete... */
- if (transaction)
-- log_wait_commit(journal, transaction->t_tid);
-+ err = log_wait_commit(journal, transaction->t_tid);
-
- /* ...and flush everything in the log out to disk. */
- lock_journal(journal);
-diff -Nur linux-2.4.29/fs/jbd/transaction.c linux-mips/fs/jbd/transaction.c
---- linux-2.4.29/fs/jbd/transaction.c 2004-08-08 01:26:05.000000000 +0200
-+++ linux-mips/fs/jbd/transaction.c 2005-03-26 11:47:36.081729900 +0100
-@@ -1484,7 +1484,7 @@
- * to wait for the commit to complete.
- */
- if (handle->h_sync && !(current->flags & PF_MEMALLOC))
-- log_wait_commit(journal, tid);
-+ err = log_wait_commit(journal, tid);
- }
- kfree(handle);
- return err;
-@@ -1509,7 +1509,7 @@
- goto out;
- }
- handle->h_sync = 1;
-- journal_stop(handle);
-+ ret = journal_stop(handle);
- out:
- unlock_kernel();
- return ret;
-diff -Nur linux-2.4.29/fs/jfs/jfs_defragfs.h linux-mips/fs/jfs/jfs_defragfs.h
---- linux-2.4.29/fs/jfs/jfs_defragfs.h 2002-11-29 00:53:15.000000000 +0100
-+++ linux-mips/fs/jfs/jfs_defragfs.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,51 +0,0 @@
--/*
-- * Copyright (c) International Business Machines Corp., 2000-2001
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-- * the GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-- */
--#ifndef _H_JFS_DEFRAGFS
--#define _H_JFS_DEFRAGFS
--
--/*
-- * defragfs parameter list
-- */
--struct defragfs {
-- uint flag; /* 4: */
-- u8 dev; /* 1: */
-- u8 pad[3]; /* 3: */
-- s32 fileset; /* 4: */
-- u32 inostamp; /* 4: */
-- u32 ino; /* 4: */
-- u32 gen; /* 4: */
-- s64 xoff; /* 8: */
-- s64 old_xaddr; /* 8: */
-- s64 new_xaddr; /* 8: */
-- s32 xlen; /* 4: */
--};
--
--/* plist flag */
--#define DEFRAGFS_SYNC 0x80000000
--#define DEFRAGFS_COMMIT 0x40000000
--#define DEFRAGFS_RELOCATE 0x10000000
--
--#define INODE_TYPE 0x0000F000 /* IFREG or IFDIR */
--
--#define EXTENT_TYPE 0x000000ff
--#define DTPAGE 0x00000001
--#define XTPAGE 0x00000002
--#define DATAEXT 0x00000004
--#define EAEXT 0x00000008
--
--#endif /* _H_JFS_DEFRAGFS */
-diff -Nur linux-2.4.29/fs/jfs/jfs_imap.c linux-mips/fs/jfs/jfs_imap.c
---- linux-2.4.29/fs/jfs/jfs_imap.c 2005-01-19 15:10:10.000000000 +0100
-+++ linux-mips/fs/jfs/jfs_imap.c 2005-03-26 11:47:36.085729244 +0100
-@@ -486,7 +486,6 @@
- /* read the page of fixed disk inode (AIT) in raw mode */
- mp = read_metapage(ip, address << sbi->l2nbperpage, PSIZE, 1);
- if (mp == NULL) {
-- ip->i_sb = NULL;
- ip->i_nlink = 1; /* Don't want iput() deleting it */
- iput(ip);
- return (NULL);
-@@ -499,7 +498,6 @@
- /* copy on-disk inode to in-memory inode */
- if ((copy_from_dinode(dp, ip)) != 0) {
- /* handle bad return by returning NULL for ip */
-- ip->i_sb = NULL;
- ip->i_nlink = 1; /* Don't want iput() deleting it */
- iput(ip);
- /* release the page */
-diff -Nur linux-2.4.29/fs/jfs/jfs_metapage.c linux-mips/fs/jfs/jfs_metapage.c
---- linux-2.4.29/fs/jfs/jfs_metapage.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/fs/jfs/jfs_metapage.c 2005-03-26 11:47:36.086729079 +0100
-@@ -298,14 +298,14 @@
- mp = search_hash(hash_ptr, mapping, lblock);
- if (mp) {
- page_found:
-- mp->count++;
-- lock_metapage(mp);
-- spin_unlock(&meta_lock);
- if (test_bit(META_stale, &mp->flag)) {
-- release_metapage(mp);
-- yield(); /* Let other waiters release it, too */
-+ spin_unlock(&meta_lock);
-+ yield();
- goto again;
- }
-+ mp->count++;
-+ lock_metapage(mp);
-+ spin_unlock(&meta_lock);
- if (test_bit(META_discard, &mp->flag)) {
- if (!new) {
- jfs_error(inode->i_sb,
-@@ -518,7 +518,6 @@
- }
-
- if (mp->page) {
-- /* Releasing spinlock, we have to check mp->count later */
- set_bit(META_stale, &mp->flag);
- spin_unlock(&meta_lock);
- kunmap(mp->page);
-@@ -555,12 +554,6 @@
- list_del(&mp->synclist);
- LOGSYNC_UNLOCK(log);
- }
-- if (mp->count) {
-- /* Someone else is trying to get this metpage */
-- unlock_metapage(mp);
-- spin_unlock(&meta_lock);
-- return;
-- }
- remove_from_hash(mp, meta_hash(mp->mapping, mp->index));
- spin_unlock(&meta_lock);
-
-@@ -589,12 +582,8 @@
- mp = search_hash(hash_ptr, mapping, lblock);
- if (mp) {
- if (test_bit(META_stale, &mp->flag)) {
-- /* Racing with release_metapage */
-- mp->count++;
-- lock_metapage(mp);
- spin_unlock(&meta_lock);
-- /* racing release_metapage should be done now */
-- release_metapage(mp);
-+ yield();
- goto again;
- }
-
-diff -Nur linux-2.4.29/fs/jfs/jfs_unicode.c linux-mips/fs/jfs/jfs_unicode.c
---- linux-2.4.29/fs/jfs/jfs_unicode.c 2004-04-14 15:05:40.000000000 +0200
-+++ linux-mips/fs/jfs/jfs_unicode.c 2005-03-26 11:47:36.089728587 +0100
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (c) International Business Machines Corp., 2000-2002
-+ * Copyright (C) International Business Machines Corp., 2000-2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-@@ -18,7 +18,7 @@
-
- #include <linux/fs.h>
- #include <linux/slab.h>
--#include "jfs_types.h"
-+#include "jfs_incore.h"
- #include "jfs_filsys.h"
- #include "jfs_unicode.h"
- #include "jfs_debug.h"
-@@ -34,17 +34,40 @@
- {
- int i;
- int outlen = 0;
-+ static int warn_again = 5; /* Only warn up to 5 times total */
-+ int warn = !!warn_again; /* once per string */
-
-- for (i = 0; (i < len) && from[i]; i++) {
-- int charlen;
-- charlen =
-- codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
-- NLS_MAX_CHARSET_SIZE);
-- if (charlen > 0) {
-- outlen += charlen;
-- } else {
-- to[outlen++] = '?';
-+ if (codepage) {
-+ for (i = 0; (i < len) && from[i]; i++) {
-+ int charlen;
-+ charlen =
-+ codepage->uni2char(le16_to_cpu(from[i]),
-+ &to[outlen],
-+ NLS_MAX_CHARSET_SIZE);
-+ if (charlen > 0)
-+ outlen += charlen;
-+ else
-+ to[outlen++] = '?';
- }
-+ } else {
-+ for (i = 0; (i < len) && from[i]; i++) {
-+ if (le16_to_cpu(from[i]) & 0xff00) {
-+ if (warn) {
-+ warn--;
-+ warn_again--;
-+ printk(KERN_ERR
-+ "non-latin1 character 0x%x found in JFS file name\n",
-+ le16_to_cpu(from[i]));
-+ printk(KERN_ERR
-+ "mount with iocharset=utf8 to access\n");
-+ }
-+ to[i] = '?';
-+ }
-+ else
-+ to[i] = (char) (le16_to_cpu(from[i]));
-+ }
-+ outlen = i;
-+
- }
- to[outlen] = 0;
- return outlen;
-@@ -56,20 +79,27 @@
- * FUNCTION: Convert character string to unicode string
- *
- */
--static int jfs_strtoUCS(wchar_t * to, const char *from, int len,
-+static int jfs_strtoUCS(wchar_t * to, const unsigned char *from, int len,
- struct nls_table *codepage)
- {
- int charlen;
- int i;
-
-- for (i = 0; len && *from; i++, from += charlen, len -= charlen) {
-- charlen = codepage->char2uni(from, len, &to[i]);
-- if (charlen < 1) {
-- jfs_err("jfs_strtoUCS: char2uni returned %d.", charlen);
-- jfs_err("charset = %s, char = 0x%x",
-- codepage->charset, (unsigned char) *from);
-- return charlen;
-+ if (codepage) {
-+ for (i = 0; len && *from; i++, from += charlen, len -= charlen)
-+ {
-+ charlen = codepage->char2uni(from, len, &to[i]);
-+ if (charlen < 1) {
-+ jfs_err("jfs_strtoUCS: char2uni returned %d.",
-+ charlen);
-+ jfs_err("charset = %s, char = 0x%x",
-+ codepage->charset, *from);
-+ return charlen;
-+ }
- }
-+ } else {
-+ for (i = 0; (i < len) && from[i]; i++)
-+ to[i] = (wchar_t) from[i];
- }
-
- to[i] = 0;
-@@ -82,9 +112,9 @@
- * FUNCTION: Allocate and translate to unicode string
- *
- */
--int get_UCSname(struct component_name * uniName, struct dentry *dentry,
-- struct nls_table *nls_tab)
-+int get_UCSname(struct component_name * uniName, struct dentry *dentry)
- {
-+ struct nls_table *nls_tab = JFS_SBI(dentry->d_sb)->nls_tab;
- int length = dentry->d_name.len;
-
- if (length > JFS_NAME_MAX)
-diff -Nur linux-2.4.29/fs/jfs/jfs_unicode.h linux-mips/fs/jfs/jfs_unicode.h
---- linux-2.4.29/fs/jfs/jfs_unicode.h 2002-11-29 00:53:15.000000000 +0100
-+++ linux-mips/fs/jfs/jfs_unicode.h 2005-03-26 11:47:36.095727603 +0100
-@@ -1,6 +1,6 @@
- /*
-- * Copyright (c) International Business Machines Corp., 2000-2002
-- * Portions Copyright (c) Christoph Hellwig, 2001-2002
-+ * Copyright (C) International Business Machines Corp., 2000-2002
-+ * Portions Copyright (C) Christoph Hellwig, 2001-2002
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-@@ -30,8 +30,7 @@
-
- extern signed char UniUpperTable[512];
- extern UNICASERANGE UniUpperRange[];
--extern int get_UCSname(struct component_name *, struct dentry *,
-- struct nls_table *);
-+extern int get_UCSname(struct component_name *, struct dentry *);
- extern int jfs_strfromUCS_le(char *, const wchar_t *, int, struct nls_table *);
-
- #define free_UCSname(COMP) kfree((COMP)->name)
-diff -Nur linux-2.4.29/fs/jfs/namei.c linux-mips/fs/jfs/namei.c
---- linux-2.4.29/fs/jfs/namei.c 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/fs/jfs/namei.c 2005-03-26 11:47:36.096727438 +0100
-@@ -74,7 +74,7 @@
- * search parent directory for entry/freespace
- * (dtSearch() returns parent directory page pinned)
- */
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(dip->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out1;
-
- /*
-@@ -195,7 +195,7 @@
- * search parent directory for entry/freespace
- * (dtSearch() returns parent directory page pinned)
- */
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(dip->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out1;
-
- /*
-@@ -318,9 +318,8 @@
- goto out;
- }
-
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(dip->i_sb)->nls_tab))) {
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out;
-- }
-
- tid = txBegin(dip->i_sb, 0);
-
-@@ -437,7 +436,7 @@
-
- jfs_info("jfs_unlink: dip:0x%p name:%s", dip, dentry->d_name.name);
-
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(dip->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out;
-
- IWRITE_LOCK(ip);
-@@ -780,7 +779,7 @@
- /*
- * scan parent directory for entry/freespace
- */
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(ip->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out;
-
- if ((rc = dtSearch(dir, &dname, &ino, &btstack, JFS_CREATE)))
-@@ -865,7 +864,7 @@
- * (dtSearch() returns parent directory page pinned)
- */
-
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(dip->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out1;
-
- /*
-@@ -1044,12 +1043,10 @@
- old_ip = old_dentry->d_inode;
- new_ip = new_dentry->d_inode;
-
-- if ((rc = get_UCSname(&old_dname, old_dentry,
-- JFS_SBI(old_dir->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&old_dname, old_dentry)))
- goto out1;
-
-- if ((rc = get_UCSname(&new_dname, new_dentry,
-- JFS_SBI(old_dir->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&new_dname, new_dentry)))
- goto out2;
-
- /*
-@@ -1301,7 +1298,7 @@
-
- jfs_info("jfs_mknod: %s", dentry->d_name.name);
-
-- if ((rc = get_UCSname(&dname, dentry, JFS_SBI(dir->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&dname, dentry)))
- goto out;
-
- ip = ialloc(dir, mode);
-@@ -1376,8 +1373,7 @@
- else if (strcmp(name, "..") == 0)
- inum = PARENT(dip);
- else {
-- if ((rc =
-- get_UCSname(&key, dentry, JFS_SBI(dip->i_sb)->nls_tab)))
-+ if ((rc = get_UCSname(&key, dentry)))
- return ERR_PTR(rc);
- rc = dtSearch(dip, &key, &inum, &btstack, JFS_LOOKUP);
- free_UCSname(&key);
-diff -Nur linux-2.4.29/fs/jfs/super.c linux-mips/fs/jfs/super.c
---- linux-2.4.29/fs/jfs/super.c 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/fs/jfs/super.c 2005-03-26 11:47:36.101726618 +0100
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) International Business Machines Corp., 2000-2003
-+ * Copyright (C) International Business Machines Corp., 2000-2005
- * Portions Copyright (C) Christoph Hellwig, 2001-2002
- *
- * This program is free software; you can redistribute it and/or modify
-@@ -155,8 +155,10 @@
- rc = jfs_umount(sb);
- if (rc)
- jfs_err("jfs_umount failed with return code %d", rc);
-- unload_nls(sbi->nls_tab);
-- sbi->nls_tab = NULL;
-+ if (sbi->nls_tab) {
-+ unload_nls(sbi->nls_tab);
-+ sbi->nls_tab = NULL;
-+ }
-
- kfree(sbi);
- }
-@@ -182,7 +184,7 @@
- static int parse_options(char *options, struct super_block *sb, s64 *newLVSize,
- int *flag)
- {
-- void *nls_map = NULL;
-+ void *nls_map = (void *)-1; /* -1: no change; NULL: none */
- char *this_char;
- char *value;
- struct jfs_sb_info *sbi = JFS_SBI(sb);
-@@ -222,13 +224,12 @@
- } else if (!strcmp(this_char, "iocharset")) {
- if (!value || !*value)
- goto needs_arg;
-- if (nls_map) /* specified iocharset twice! */
-+ if (nls_map && nls_map != (void *) -1)
- unload_nls(nls_map);
-- nls_map = load_nls(value);
-- if (!nls_map) {
-- printk(KERN_ERR "JFS: charset not found\n");
-- goto cleanup;
-- }
-+ if (!strcmp(value, "none"))
-+ nls_map = NULL;
-+ else
-+ nls_map = load_nls(value);
- } else if (!strcmp(this_char, "resize")) {
- if (!value || !*value) {
- *newLVSize = jfs_get_volume_size(sb);
-@@ -250,9 +251,9 @@
- goto cleanup;
- }
- }
-- if (nls_map) {
-+ if (nls_map != (void *) -1) {
- /* Discard old (if remount) */
-- if (sbi->nls_tab)
-+ if (sbi->nls_tab && sbi->nls_tab != (void *) -1)
- unload_nls(sbi->nls_tab);
- sbi->nls_tab = nls_map;
- }
-@@ -260,7 +261,7 @@
- needs_arg:
- printk(KERN_ERR "JFS: %s needs an argument\n", this_char);
- cleanup:
-- if (nls_map)
-+ if (nls_map && nls_map != (void *) -1)
- unload_nls(nls_map);
- return 0;
- }
-@@ -328,6 +329,8 @@
- /* initialize the mount flag and determine the default error handler */
- flag = JFS_ERR_REMOUNT_RO;
-
-+ /* nls_tab will be set to NULL if no character mapping is requested */
-+ sbi->nls_tab = (void *) -1;
- if (!parse_options((char *) data, sb, &newLVSize, &flag)) {
- kfree(sbi);
- return NULL;
-@@ -378,7 +381,7 @@
- if (!sb->s_root)
- goto out_no_root;
-
-- if (!sbi->nls_tab)
-+ if (sbi->nls_tab == (void *) -1)
- sbi->nls_tab = load_nls_default();
-
- /* logical blocks are represented by 40 bits in pxd_t, etc. */
-diff -Nur linux-2.4.29/fs/nfsd/vfs.c linux-mips/fs/nfsd/vfs.c
---- linux-2.4.29/fs/nfsd/vfs.c 2004-11-17 12:54:21.000000000 +0100
-+++ linux-mips/fs/nfsd/vfs.c 2005-03-26 11:47:36.103726290 +0100
-@@ -466,6 +466,8 @@
- atomic_set(&filp->f_count, 1);
- filp->f_dentry = dentry;
- filp->f_vfsmnt = fhp->fh_export->ex_mnt;
-+ filp->f_maxcount = INT_MAX;
-+
- if (access & MAY_WRITE) {
- filp->f_flags = O_WRONLY|O_LARGEFILE;
- filp->f_mode = FMODE_WRITE;
+
+ /* Flush all traces of the currently running executable */
+@@ -1208,7 +1211,11 @@
+ elf.e_entry = 0;
+ elf.e_phoff = sizeof(elf);
+ elf.e_shoff = 0;
++#ifdef ELF_CORE_EFLAGS
++ elf.e_flags = ELF_CORE_EFLAGS;
++#else
+ elf.e_flags = 0;
++#endif
+ elf.e_ehsize = sizeof(elf);
+ elf.e_phentsize = sizeof(struct elf_phdr);
+ elf.e_phnum = segs+1; /* Include notes */
diff -Nur linux-2.4.29/fs/partitions/sgi.c linux-mips/fs/partitions/sgi.c
--- linux-2.4.29/fs/partitions/sgi.c 2001-10-02 05:03:26.000000000 +0200
+++ linux-mips/fs/partitions/sgi.c 2004-08-11 22:30:07.000000000 +0200
return len;
}
-diff -Nur linux-2.4.29/fs/proc/kcore.c linux-mips/fs/proc/kcore.c
---- linux-2.4.29/fs/proc/kcore.c 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/fs/proc/kcore.c 2005-03-26 11:47:36.107725633 +0100
-@@ -136,7 +136,10 @@
- }
- *elf_buflen = sizeof(struct elfhdr) +
- (*num_vma + 2)*sizeof(struct elf_phdr) +
-- 3 * sizeof(struct memelfnote);
-+ 3 * (sizeof(struct elf_note) + 4) +
-+ sizeof(struct elf_prstatus) +
-+ sizeof(struct elf_prpsinfo) +
-+ sizeof(struct task_struct);
- *elf_buflen = PAGE_ALIGN(*elf_buflen);
- return (size - PAGE_OFFSET + *elf_buflen);
- }
-@@ -279,7 +282,7 @@
-
- memset(&prstatus, 0, sizeof(struct elf_prstatus));
-
-- nhdr->p_filesz = notesize(¬es[0]);
-+ nhdr->p_filesz += notesize(¬es[0]);
- bufp = storenote(¬es[0], bufp);
-
- /* set up the process info */
-@@ -296,7 +299,7 @@
- strcpy(prpsinfo.pr_fname, "vmlinux");
- strncpy(prpsinfo.pr_psargs, saved_command_line, ELF_PRARGSZ);
-
-- nhdr->p_filesz = notesize(¬es[1]);
-+ nhdr->p_filesz += notesize(¬es[1]);
- bufp = storenote(¬es[1], bufp);
-
- /* set up the task structure */
-@@ -305,7 +308,7 @@
- notes[2].datasz = sizeof(struct task_struct);
- notes[2].data = current;
-
-- nhdr->p_filesz = notesize(¬es[2]);
-+ nhdr->p_filesz += notesize(¬es[2]);
- bufp = storenote(¬es[2], bufp);
-
- } /* end elf_kcore_store_hdr() */
diff -Nur linux-2.4.29/fs/proc/proc_misc.c linux-mips/fs/proc/proc_misc.c
--- linux-2.4.29/fs/proc/proc_misc.c 2004-08-08 01:26:06.000000000 +0200
+++ linux-mips/fs/proc/proc_misc.c 2004-08-14 20:39:01.000000000 +0200
+ kstat.per_cpu_nice[cpu_logical_map(i)] \
+ kstat.per_cpu_system[cpu_logical_map(i)]));
proc_sprintf(page, &off, &len,
-diff -Nur linux-2.4.29/fs/proc/proc_tty.c linux-mips/fs/proc/proc_tty.c
---- linux-2.4.29/fs/proc/proc_tty.c 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/fs/proc/proc_tty.c 2005-03-26 11:47:36.107725633 +0100
-@@ -129,7 +129,7 @@
- }
-
- /*
-- * Thsi function is called by register_tty_driver() to handle
-+ * This function is called by tty_register_driver() to handle
- * registering the driver's /proc handler into /proc/tty/driver/<foo>
- */
- void proc_tty_register_driver(struct tty_driver *driver)
-@@ -152,7 +152,7 @@
- }
-
- /*
-- * This function is called by unregister_tty_driver()
-+ * This function is called by tty_unregister_driver()
- */
- void proc_tty_unregister_driver(struct tty_driver *driver)
- {
-diff -Nur linux-2.4.29/fs/read_write.c linux-mips/fs/read_write.c
---- linux-2.4.29/fs/read_write.c 2003-08-25 13:44:43.000000000 +0200
-+++ linux-mips/fs/read_write.c 2005-03-26 11:47:36.064732690 +0100
-@@ -40,6 +40,28 @@
- return -EISDIR;
- }
-
-+int rw_verify_area(int read_write, struct file *file, loff_t *ppos, size_t count)
-+{
-+ struct inode *inode;
-+ loff_t pos;
-+
-+ if (unlikely(count > file->f_maxcount))
-+ goto Einval;
-+
-+ pos = *ppos;
-+
-+ if (unlikely((pos < 0) || (loff_t) (pos + count) < 0))
-+ goto Einval;
-+
-+ inode = file->f_dentry->d_inode;
-+ if (inode->i_flock && MANDATORY_LOCK(inode))
-+ return locks_mandatory_area(read_write == READ ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE, inode, file, *ppos, count);
-+ return 0;
-+
-+Einval:
-+ return -EINVAL;
-+}
-+
- loff_t generic_file_llseek(struct file *file, loff_t offset, int origin)
- {
- long long retval;
-@@ -168,8 +190,8 @@
- file = fget(fd);
- if (file) {
- if (file->f_mode & FMODE_READ) {
-- ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode,
-- file, file->f_pos, count);
-+ ret = rw_verify_area(READ, file, &file->f_pos, count);
-+
- if (!ret) {
- ssize_t (*read)(struct file *, char *, size_t, loff_t *);
- ret = -EINVAL;
-@@ -193,9 +215,7 @@
- file = fget(fd);
- if (file) {
- if (file->f_mode & FMODE_WRITE) {
-- struct inode *inode = file->f_dentry->d_inode;
-- ret = locks_verify_area(FLOCK_VERIFY_WRITE, inode, file,
-- file->f_pos, count);
-+ ret = rw_verify_area(WRITE, file, &file->f_pos, count);
- if (!ret) {
- ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
- ret = -EINVAL;
-@@ -224,7 +244,6 @@
- ssize_t ret, i;
- io_fn_t fn;
- iov_fn_t fnv;
-- struct inode *inode;
-
- /*
- * First get the "struct iovec" from user memory and
-@@ -275,12 +294,11 @@
- goto out;
- }
-
-- inode = file->f_dentry->d_inode;
- /* VERIFY_WRITE actually means a read, as we write to user space */
-- ret = locks_verify_area((type == VERIFY_WRITE
-- ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE),
-- inode, file, file->f_pos, tot_len);
-- if (ret) goto out;
-+ ret = rw_verify_area((type == VERIFY_WRITE ? READ : WRITE),
-+ file, &file->f_pos, tot_len);
-+ if (ret)
-+ goto out;
-
- fnv = (type == VERIFY_WRITE ? file->f_op->readv : file->f_op->writev);
- if (fnv) {
-@@ -383,8 +401,8 @@
- goto bad_file;
- if (!(file->f_mode & FMODE_READ))
- goto out;
-- ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode,
-- file, pos, count);
-+ ret = rw_verify_area(READ, file, &pos, count);
-+
- if (ret)
- goto out;
- ret = -EINVAL;
-@@ -414,8 +432,8 @@
- goto bad_file;
- if (!(file->f_mode & FMODE_WRITE))
- goto out;
-- ret = locks_verify_area(FLOCK_VERIFY_WRITE, file->f_dentry->d_inode,
-- file, pos, count);
-+ ret = rw_verify_area(WRITE, file, &pos, count);
-+
- if (ret)
- goto out;
- ret = -EINVAL;
diff -Nur linux-2.4.29/include/asm-alpha/param.h linux-mips/include/asm-alpha/param.h
--- linux-2.4.29/include/asm-alpha/param.h 2000-11-08 08:37:31.000000000 +0100
+++ linux-mips/include/asm-alpha/param.h 2000-11-28 04:59:03.000000000 +0100
#endif
#define EXEC_PAGESIZE 8192
-diff -Nur linux-2.4.29/include/asm-i386/acpi.h linux-mips/include/asm-i386/acpi.h
---- linux-2.4.29/include/asm-i386/acpi.h 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/include/asm-i386/acpi.h 2005-03-26 11:47:36.177714147 +0100
-@@ -121,6 +121,8 @@
- extern int acpi_strict;
- extern int acpi_disabled;
- extern int acpi_ht;
-+extern int acpi_skip_timer_override;
-+void __init check_acpi_pci(void);
- static inline void disable_acpi(void)
- {
- acpi_disabled = 1;
diff -Nur linux-2.4.29/include/asm-i386/param.h linux-mips/include/asm-i386/param.h
--- linux-2.4.29/include/asm-i386/param.h 2000-10-27 20:04:43.000000000 +0200
+++ linux-mips/include/asm-i386/param.h 2000-11-23 03:00:55.000000000 +0100
#endif
#define EXEC_PAGESIZE 4096
-diff -Nur linux-2.4.29/include/asm-i386/pci-direct.h linux-mips/include/asm-i386/pci-direct.h
---- linux-2.4.29/include/asm-i386/pci-direct.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-mips/include/asm-i386/pci-direct.h 2005-03-18 13:13:30.000000000 +0100
-@@ -0,0 +1 @@
-+#include "asm-x86_64/pci-direct.h"
diff -Nur linux-2.4.29/include/asm-ia64/param.h linux-mips/include/asm-ia64/param.h
--- linux-2.4.29/include/asm-ia64/param.h 2004-04-14 15:05:40.000000000 +0200
+++ linux-mips/include/asm-ia64/param.h 2004-04-16 05:14:20.000000000 +0200
#define EXEC_PAGESIZE 8192
diff -Nur linux-2.4.29/include/asm-mips/au1000_gpio.h linux-mips/include/asm-mips/au1000_gpio.h
--- linux-2.4.29/include/asm-mips/au1000_gpio.h 2002-11-29 00:53:15.000000000 +0100
-+++ linux-mips/include/asm-mips/au1000_gpio.h 2005-01-31 12:59:48.000000000 +0100
++++ linux-mips/include/asm-mips/au1000_gpio.h 2005-01-30 09:01:28.000000000 +0100
@@ -30,6 +30,13 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#endif
diff -Nur linux-2.4.29/include/asm-mips/au1000.h linux-mips/include/asm-mips/au1000.h
--- linux-2.4.29/include/asm-mips/au1000.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/include/asm-mips/au1000.h 2005-01-31 12:59:48.000000000 +0100
++++ linux-mips/include/asm-mips/au1000.h 2005-01-30 09:01:28.000000000 +0100
@@ -160,28 +160,356 @@
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
#endif
+
diff -Nur linux-2.4.29/include/asm-mips/au1000_pcmcia.h linux-mips/include/asm-mips/au1000_pcmcia.h
--- linux-2.4.29/include/asm-mips/au1000_pcmcia.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/include/asm-mips/au1000_pcmcia.h 2005-01-31 12:59:48.000000000 +0100
++++ linux-mips/include/asm-mips/au1000_pcmcia.h 2005-01-30 09:01:28.000000000 +0100
@@ -38,16 +38,41 @@
#define AU1X_SOCK0_PHYS_MEM 0xF80000000
struct pcmcia_state {
diff -Nur linux-2.4.29/include/asm-mips/au1100_mmc.h linux-mips/include/asm-mips/au1100_mmc.h
--- linux-2.4.29/include/asm-mips/au1100_mmc.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/include/asm-mips/au1100_mmc.h 2005-01-31 12:59:48.000000000 +0100
++++ linux-mips/include/asm-mips/au1100_mmc.h 2005-01-30 09:01:28.000000000 +0100
@@ -39,16 +39,22 @@
#define __ASM_AU1100_MMC_H
diff -Nur linux-2.4.29/include/asm-mips/au1xxx_dbdma.h linux-mips/include/asm-mips/au1xxx_dbdma.h
--- linux-2.4.29/include/asm-mips/au1xxx_dbdma.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/include/asm-mips/au1xxx_dbdma.h 2005-01-31 12:59:48.000000000 +0100
++++ linux-mips/include/asm-mips/au1xxx_dbdma.h 2005-01-30 09:01:28.000000000 +0100
@@ -43,7 +43,7 @@
#define DDMA_GLOBAL_BASE 0xb4003000
#define DDMA_CHANNEL_BASE 0xb4002000
+#endif //__AU1XXX_GPIO_H
diff -Nur linux-2.4.29/include/asm-mips/au1xxx_psc.h linux-mips/include/asm-mips/au1xxx_psc.h
--- linux-2.4.29/include/asm-mips/au1xxx_psc.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/include/asm-mips/au1xxx_psc.h 2005-01-31 12:59:49.000000000 +0100
++++ linux-mips/include/asm-mips/au1xxx_psc.h 2005-01-30 09:01:28.000000000 +0100
@@ -41,6 +41,11 @@
#define PSC3_BASE_ADDR 0xb0d00000
#endif
#define PSC_I2SCFG_DIV_MASK (3 << 13)
diff -Nur linux-2.4.29/include/asm-mips/bootinfo.h linux-mips/include/asm-mips/bootinfo.h
--- linux-2.4.29/include/asm-mips/bootinfo.h 2004-02-18 14:36:32.000000000 +0100
-+++ linux-mips/include/asm-mips/bootinfo.h 2005-01-31 12:59:49.000000000 +0100
++++ linux-mips/include/asm-mips/bootinfo.h 2005-01-30 09:01:28.000000000 +0100
@@ -180,6 +180,9 @@
#define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */
#define MACH_CSB250 8 /* Cogent Au1500 */
+
diff -Nur linux-2.4.29/include/asm-mips/db1x00.h linux-mips/include/asm-mips/db1x00.h
--- linux-2.4.29/include/asm-mips/db1x00.h 2005-01-19 15:10:11.000000000 +0100
-+++ linux-mips/include/asm-mips/db1x00.h 2005-01-31 12:59:49.000000000 +0100
++++ linux-mips/include/asm-mips/db1x00.h 2005-01-30 09:06:19.000000000 +0100
@@ -1,5 +1,5 @@
/*
- * AMD Alchemy DB1x00 Reference Boards
#endif /* _ASM_HAZARDS_H */
diff -Nur linux-2.4.29/include/asm-mips/mipsregs.h linux-mips/include/asm-mips/mipsregs.h
--- linux-2.4.29/include/asm-mips/mipsregs.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/asm-mips/mipsregs.h 2005-03-26 11:47:36.210708732 +0100
++++ linux-mips/include/asm-mips/mipsregs.h 2005-02-06 22:24:22.000000000 +0100
@@ -757,10 +757,18 @@
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
diff -Nur linux-2.4.29/include/asm-mips/pb1100.h linux-mips/include/asm-mips/pb1100.h
--- linux-2.4.29/include/asm-mips/pb1100.h 2003-08-25 13:44:44.000000000 +0200
-+++ linux-mips/include/asm-mips/pb1100.h 2005-01-31 12:59:49.000000000 +0100
++++ linux-mips/include/asm-mips/pb1100.h 2005-01-30 09:10:29.000000000 +0100
@@ -1,5 +1,5 @@
/*
- * Alchemy Semi PB1100 Referrence Board
+
diff -Nur linux-2.4.29/include/asm-mips/pb1550.h linux-mips/include/asm-mips/pb1550.h
--- linux-2.4.29/include/asm-mips/pb1550.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/asm-mips/pb1550.h 2005-01-31 12:59:49.000000000 +0100
++++ linux-mips/include/asm-mips/pb1550.h 2005-01-30 09:01:28.000000000 +0100
@@ -30,13 +30,11 @@
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#endif /* _ASM_HAZARDS_H */
diff -Nur linux-2.4.29/include/asm-mips64/mipsregs.h linux-mips/include/asm-mips64/mipsregs.h
--- linux-2.4.29/include/asm-mips64/mipsregs.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/asm-mips64/mipsregs.h 2005-03-26 11:47:36.406676569 +0100
++++ linux-mips/include/asm-mips64/mipsregs.h 2005-02-06 22:24:22.000000000 +0100
@@ -757,10 +757,18 @@
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
#endif
#define EXEC_PAGESIZE 4096
-diff -Nur linux-2.4.29/include/asm-ppc/processor.h linux-mips/include/asm-ppc/processor.h
---- linux-2.4.29/include/asm-ppc/processor.h 2004-04-14 15:05:40.000000000 +0200
-+++ linux-mips/include/asm-ppc/processor.h 2005-03-26 11:47:36.510659503 +0100
-@@ -678,7 +678,7 @@
- #define PVR_440GP_RC2 0x40200481
- #define PVR_440GX_RA 0x51b21850
- #define PVR_440GX_RB 0x51b21851
--#define PVR_440GX_RB1 0x51b21852
-+#define PVR_440GX_RC 0x51b21892
- #define PVR_601 0x00010000
- #define PVR_602 0x00050000
- #define PVR_603 0x00030000
diff -Nur linux-2.4.29/include/asm-s390/param.h linux-mips/include/asm-s390/param.h
--- linux-2.4.29/include/asm-s390/param.h 2001-02-13 23:13:44.000000000 +0100
+++ linux-mips/include/asm-s390/param.h 2001-03-09 21:34:48.000000000 +0100
@@ -11,6 +11,9 @@
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
-
- #define EXEC_PAGESIZE 4096
-diff -Nur linux-2.4.29/include/asm-sh/param.h linux-mips/include/asm-sh/param.h
---- linux-2.4.29/include/asm-sh/param.h 2001-01-04 22:19:13.000000000 +0100
-+++ linux-mips/include/asm-sh/param.h 2001-01-11 05:02:45.000000000 +0100
-@@ -3,6 +3,9 @@
-
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
-
- #define EXEC_PAGESIZE 4096
-diff -Nur linux-2.4.29/include/asm-sparc/param.h linux-mips/include/asm-sparc/param.h
---- linux-2.4.29/include/asm-sparc/param.h 2000-10-30 23:34:12.000000000 +0100
-+++ linux-mips/include/asm-sparc/param.h 2000-11-23 03:00:56.000000000 +0100
-@@ -4,6 +4,9 @@
-
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
-
- #define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
-diff -Nur linux-2.4.29/include/asm-sparc/system.h linux-mips/include/asm-sparc/system.h
---- linux-2.4.29/include/asm-sparc/system.h 2004-02-18 14:36:32.000000000 +0100
-+++ linux-mips/include/asm-sparc/system.h 2005-03-26 11:47:36.945588121 +0100
-@@ -295,11 +295,11 @@
- #define wmb() mb()
- #define set_mb(__var, __value) do { __var = __value; mb(); } while(0)
- #define set_wmb(__var, __value) set_mb(__var, __value)
--#define smp_mb() __asm__ __volatile__("":::"memory");
--#define smp_rmb() __asm__ __volatile__("":::"memory");
--#define smp_wmb() __asm__ __volatile__("":::"memory");
-+#define smp_mb() __asm__ __volatile__("":::"memory")
-+#define smp_rmb() __asm__ __volatile__("":::"memory")
-+#define smp_wmb() __asm__ __volatile__("":::"memory")
-
--#define nop() __asm__ __volatile__ ("nop");
-+#define nop() __asm__ __volatile__ ("nop")
-
- /* This has special calling conventions */
- #ifndef CONFIG_SMP
-diff -Nur linux-2.4.29/include/asm-sparc64/atomic.h linux-mips/include/asm-sparc64/atomic.h
---- linux-2.4.29/include/asm-sparc64/atomic.h 2001-07-20 03:11:13.000000000 +0200
-+++ linux-mips/include/asm-sparc64/atomic.h 2005-03-26 11:47:36.964585003 +0100
-@@ -8,31 +8,59 @@
- #ifndef __ARCH_SPARC64_ATOMIC__
- #define __ARCH_SPARC64_ATOMIC__
-
-+#include <linux/config.h>
-+
- typedef struct { volatile int counter; } atomic_t;
- #define ATOMIC_INIT(i) { (i) }
-
- #define atomic_read(v) ((v)->counter)
- #define atomic_set(v, i) (((v)->counter) = i)
-
--extern int __atomic_add(int, atomic_t *);
--extern int __atomic_sub(int, atomic_t *);
-+extern void atomic_add(int, atomic_t *);
-+extern void atomic_sub(int, atomic_t *);
-+
-+extern int atomic_add_ret(int, atomic_t *);
-+extern int atomic_sub_ret(int, atomic_t *);
-+
-+#define atomic_dec_return(v) atomic_sub_ret(1, v)
-+
-+#define atomic_inc_return(v) atomic_add_ret(1, v)
-+
-+#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
-+
-+#define atomic_add_return(i, v) atomic_add_ret(i, v)
-+
-+/*
-+ * atomic_inc_and_test - increment and test
-+ * @v: pointer of type atomic_t
-+ *
-+ * Atomically increments @v by 1
-+ * and returns true if the result is zero, or false for all
-+ * other cases.
-+ */
-+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-+
-+#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
-
--#define atomic_add(i, v) ((void)__atomic_add(i, v))
--#define atomic_sub(i, v) ((void)__atomic_sub(i, v))
-+#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
-
--#define atomic_dec_return(v) __atomic_sub(1, v)
--#define atomic_inc_return(v) __atomic_add(1, v)
-+#define atomic_inc(v) atomic_add(1, v)
-
--#define atomic_sub_and_test(i, v) (__atomic_sub(i, v) == 0)
--#define atomic_dec_and_test(v) (__atomic_sub(1, v) == 0)
-+#define atomic_dec(v) atomic_sub(1, v)
-
--#define atomic_inc(v) ((void)__atomic_add(1, v))
--#define atomic_dec(v) ((void)__atomic_sub(1, v))
-+#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
-
- /* Atomic operations are already serializing */
-+#ifdef CONFIG_SMP
-+#define smp_mb__before_atomic_dec() membar("#StoreLoad | #LoadLoad")
-+#define smp_mb__after_atomic_dec() membar("#StoreLoad | #StoreStore")
-+#define smp_mb__before_atomic_inc() membar("#StoreLoad | #LoadLoad")
-+#define smp_mb__after_atomic_inc() membar("#StoreLoad | #StoreStore")
-+#else
- #define smp_mb__before_atomic_dec() barrier()
- #define smp_mb__after_atomic_dec() barrier()
- #define smp_mb__before_atomic_inc() barrier()
- #define smp_mb__after_atomic_inc() barrier()
-+#endif
-
- #endif /* !(__ARCH_SPARC64_ATOMIC__) */
-diff -Nur linux-2.4.29/include/asm-sparc64/bitops.h linux-mips/include/asm-sparc64/bitops.h
---- linux-2.4.29/include/asm-sparc64/bitops.h 2001-12-21 18:42:03.000000000 +0100
-+++ linux-mips/include/asm-sparc64/bitops.h 2005-03-26 11:47:37.017576306 +0100
-@@ -1,4 +1,4 @@
--/* $Id$
-+/* $Id$
- * bitops.h: Bit string operations on the V9.
- *
- * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
-@@ -7,114 +7,126 @@
- #ifndef _SPARC64_BITOPS_H
- #define _SPARC64_BITOPS_H
-
-+#include <linux/config.h>
-+#include <linux/compiler.h>
- #include <asm/byteorder.h>
-
--extern long ___test_and_set_bit(unsigned long nr, volatile void *addr);
--extern long ___test_and_clear_bit(unsigned long nr, volatile void *addr);
--extern long ___test_and_change_bit(unsigned long nr, volatile void *addr);
--
--#define test_and_set_bit(nr,addr) ({___test_and_set_bit(nr,addr)!=0;})
--#define test_and_clear_bit(nr,addr) ({___test_and_clear_bit(nr,addr)!=0;})
--#define test_and_change_bit(nr,addr) ({___test_and_change_bit(nr,addr)!=0;})
--#define set_bit(nr,addr) ((void)___test_and_set_bit(nr,addr))
--#define clear_bit(nr,addr) ((void)___test_and_clear_bit(nr,addr))
--#define change_bit(nr,addr) ((void)___test_and_change_bit(nr,addr))
-+extern int test_and_set_bit(unsigned long nr, volatile void *addr);
-+extern int test_and_clear_bit(unsigned long nr, volatile void *addr);
-+extern int test_and_change_bit(unsigned long nr, volatile void *addr);
-+extern void set_bit(unsigned long nr, volatile void *addr);
-+extern void clear_bit(unsigned long nr, volatile void *addr);
-+extern void change_bit(unsigned long nr, volatile void *addr);
-
- /* "non-atomic" versions... */
--#define __set_bit(X,Y) \
--do { unsigned long __nr = (X); \
-- long *__m = ((long *) (Y)) + (__nr >> 6); \
-- *__m |= (1UL << (__nr & 63)); \
--} while (0)
--#define __clear_bit(X,Y) \
--do { unsigned long __nr = (X); \
-- long *__m = ((long *) (Y)) + (__nr >> 6); \
-- *__m &= ~(1UL << (__nr & 63)); \
--} while (0)
--#define __change_bit(X,Y) \
--do { unsigned long __nr = (X); \
-- long *__m = ((long *) (Y)) + (__nr >> 6); \
-- *__m ^= (1UL << (__nr & 63)); \
--} while (0)
--#define __test_and_set_bit(X,Y) \
--({ unsigned long __nr = (X); \
-- long *__m = ((long *) (Y)) + (__nr >> 6); \
-- long __old = *__m; \
-- long __mask = (1UL << (__nr & 63)); \
-- *__m = (__old | __mask); \
-- ((__old & __mask) != 0); \
--})
--#define __test_and_clear_bit(X,Y) \
--({ unsigned long __nr = (X); \
-- long *__m = ((long *) (Y)) + (__nr >> 6); \
-- long __old = *__m; \
-- long __mask = (1UL << (__nr & 63)); \
-- *__m = (__old & ~__mask); \
-- ((__old & __mask) != 0); \
--})
--#define __test_and_change_bit(X,Y) \
--({ unsigned long __nr = (X); \
-- long *__m = ((long *) (Y)) + (__nr >> 6); \
-- long __old = *__m; \
-- long __mask = (1UL << (__nr & 63)); \
-- *__m = (__old ^ __mask); \
-- ((__old & __mask) != 0); \
--})
-
--#define smp_mb__before_clear_bit() do { } while(0)
--#define smp_mb__after_clear_bit() do { } while(0)
-+static __inline__ void __set_bit(int nr, volatile void *addr)
-+{
-+ unsigned long *m;
-+
-+ m = ((unsigned long *)addr) + (nr >> 6);
-+ *m |= (1UL << (nr & 63));
-+}
-+
-+static __inline__ void __clear_bit(int nr, volatile void *addr)
-+{
-+ unsigned long *m;
-+
-+ m = ((unsigned long *)addr) + (nr >> 6);
-+ *m &= ~(1UL << (nr & 63));
-+}
-
--extern __inline__ int test_bit(int nr, __const__ void *addr)
-+static __inline__ void __change_bit(int nr, volatile void *addr)
- {
-- return (1UL & (((__const__ long *) addr)[nr >> 6] >> (nr & 63))) != 0UL;
-+ unsigned long *m;
-+
-+ m = ((unsigned long *)addr) + (nr >> 6);
-+ *m ^= (1UL << (nr & 63));
-+}
-+
-+static __inline__ int __test_and_set_bit(int nr, volatile void *addr)
-+{
-+ unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
-+ unsigned long old = *m;
-+ unsigned long mask = (1UL << (nr & 63));
-+
-+ *m = (old | mask);
-+ return ((old & mask) != 0);
-+}
-+
-+static __inline__ int __test_and_clear_bit(int nr, volatile void *addr)
-+{
-+ unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
-+ unsigned long old = *m;
-+ unsigned long mask = (1UL << (nr & 63));
-+
-+ *m = (old & ~mask);
-+ return ((old & mask) != 0);
-+}
-+
-+static __inline__ int __test_and_change_bit(int nr, volatile void *addr)
-+{
-+ unsigned long *m = ((unsigned long *)addr) + (nr >> 6);
-+ unsigned long old = *m;
-+ unsigned long mask = (1UL << (nr & 63));
-+
-+ *m = (old ^ mask);
-+ return ((old & mask) != 0);
-+}
-+
-+#ifdef CONFIG_SMP
-+#define smp_mb__before_clear_bit() membar("#StoreLoad | #LoadLoad")
-+#define smp_mb__after_clear_bit() membar("#StoreLoad | #StoreStore")
-+#else
-+#define smp_mb__before_clear_bit() barrier()
-+#define smp_mb__after_clear_bit() barrier()
-+#endif
-+
-+static __inline__ int test_bit(int nr, __const__ volatile void *_addr)
-+{
-+ __const__ unsigned long *addr;
-+
-+ addr = (__const__ unsigned long *) _addr;
-+
-+ return (1UL & ((addr)[nr >> 6] >> (nr & 63))) != 0UL;
- }
-
- /* The easy/cheese version for now. */
--extern __inline__ unsigned long ffz(unsigned long word)
-+static __inline__ unsigned long ffz(unsigned long word)
- {
- unsigned long result;
-
--#ifdef ULTRA_HAS_POPULATION_COUNT /* Thanks for nothing Sun... */
-- __asm__ __volatile__(
--" brz,pn %0, 1f\n"
--" neg %0, %%g1\n"
--" xnor %0, %%g1, %%g2\n"
--" popc %%g2, %0\n"
--"1: " : "=&r" (result)
-- : "0" (word)
-- : "g1", "g2");
--#else
--#if 1 /* def EASY_CHEESE_VERSION */
- result = 0;
- while(word & 1) {
- result++;
- word >>= 1;
- }
--#else
-- unsigned long tmp;
-+ return result;
-+}
-
-- result = 0;
-- tmp = ~word & -~word;
-- if (!(unsigned)tmp) {
-- tmp >>= 32;
-- result = 32;
-- }
-- if (!(unsigned short)tmp) {
-- tmp >>= 16;
-- result += 16;
-- }
-- if (!(unsigned char)tmp) {
-- tmp >>= 8;
-- result += 8;
-+/**
-+ * __ffs - find first bit in word.
-+ * @word: The word to search
-+ *
-+ * Undefined if no bit exists, so code should check against 0 first.
-+ */
-+static __inline__ unsigned long __ffs(unsigned long word)
-+{
-+ unsigned long result = 0;
-+
-+ while (!(word & 1UL)) {
-+ result++;
-+ word >>= 1;
- }
-- if (tmp & 0xf0) result += 4;
-- if (tmp & 0xcc) result += 2;
-- if (tmp & 0xaa) result ++;
--#endif
--#endif
- return result;
- }
-
-+/*
-+ * fls: find last bit set.
-+ */
-+
-+#define fls(x) generic_fls(x)
-+
- #ifdef __KERNEL__
-
- /*
-@@ -122,8 +134,12 @@
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
--
--#define ffs(x) generic_ffs(x)
-+static __inline__ int ffs(int x)
-+{
-+ if (!x)
-+ return 0;
-+ return __ffs((unsigned long)x) + 1;
-+}
-
- /*
- * hweightN: returns the hamming weight (i.e. the number
-@@ -132,7 +148,15 @@
-
- #ifdef ULTRA_HAS_POPULATION_COUNT
-
--extern __inline__ unsigned int hweight32(unsigned int w)
-+static __inline__ unsigned int hweight64(unsigned long w)
-+{
-+ unsigned int res;
-+
-+ __asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
-+ return res;
-+}
-+
-+static __inline__ unsigned int hweight32(unsigned int w)
- {
- unsigned int res;
-
-@@ -140,7 +164,7 @@
- return res;
- }
-
--extern __inline__ unsigned int hweight16(unsigned int w)
-+static __inline__ unsigned int hweight16(unsigned int w)
- {
- unsigned int res;
-
-@@ -148,7 +172,7 @@
- return res;
- }
-
--extern __inline__ unsigned int hweight8(unsigned int w)
-+static __inline__ unsigned int hweight8(unsigned int w)
- {
- unsigned int res;
-
-@@ -158,6 +182,7 @@
-
- #else
-
-+#define hweight64(x) generic_hweight64(x)
- #define hweight32(x) generic_hweight32(x)
- #define hweight16(x) generic_hweight16(x)
- #define hweight8(x) generic_hweight8(x)
-@@ -170,7 +195,7 @@
- * on Linus's ALPHA routines, which are pretty portable BTW.
- */
-
--extern __inline__ unsigned long find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
-+static __inline__ unsigned long find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
- {
- unsigned long *p = ((unsigned long *) addr) + (offset >> 6);
- unsigned long result = offset & ~63UL;
-@@ -211,15 +236,12 @@
- #define find_first_zero_bit(addr, size) \
- find_next_zero_bit((addr), (size), 0)
-
--extern long ___test_and_set_le_bit(int nr, volatile void *addr);
--extern long ___test_and_clear_le_bit(int nr, volatile void *addr);
--
--#define test_and_set_le_bit(nr,addr) ({___test_and_set_le_bit(nr,addr)!=0;})
--#define test_and_clear_le_bit(nr,addr) ({___test_and_clear_le_bit(nr,addr)!=0;})
--#define set_le_bit(nr,addr) ((void)___test_and_set_le_bit(nr,addr))
--#define clear_le_bit(nr,addr) ((void)___test_and_clear_le_bit(nr,addr))
-+#define test_and_set_le_bit(nr,addr) \
-+ test_and_set_bit((nr) ^ 0x38, (addr))
-+#define test_and_clear_le_bit(nr,addr) \
-+ test_and_clear_bit((nr) ^ 0x38, (addr))
-
--extern __inline__ int test_le_bit(int nr, __const__ void * addr)
-+static __inline__ int test_le_bit(int nr, __const__ void *addr)
- {
- int mask;
- __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
-@@ -232,7 +254,7 @@
- #define find_first_zero_le_bit(addr, size) \
- find_next_zero_le_bit((addr), (size), 0)
-
--extern __inline__ unsigned long find_next_zero_le_bit(void *addr, unsigned long size, unsigned long offset)
-+static __inline__ unsigned long find_next_zero_le_bit(void *addr, unsigned long size, unsigned long offset)
- {
- unsigned long *p = ((unsigned long *) addr) + (offset >> 6);
- unsigned long result = offset & ~63UL;
-@@ -271,18 +293,41 @@
-
- #ifdef __KERNEL__
-
--#define ext2_set_bit test_and_set_le_bit
--#define ext2_clear_bit test_and_clear_le_bit
--#define ext2_test_bit test_le_bit
--#define ext2_find_first_zero_bit find_first_zero_le_bit
--#define ext2_find_next_zero_bit find_next_zero_le_bit
-+#define __set_le_bit(nr, addr) \
-+ __set_bit((nr) ^ 0x38, (addr))
-+#define __clear_le_bit(nr, addr) \
-+ __clear_bit((nr) ^ 0x38, (addr))
-+#define __test_and_clear_le_bit(nr, addr) \
-+ __test_and_clear_bit((nr) ^ 0x38, (addr))
-+#define __test_and_set_le_bit(nr, addr) \
-+ __test_and_set_bit((nr) ^ 0x38, (addr))
-+
-+#define ext2_set_bit(nr,addr) \
-+ __test_and_set_le_bit((nr),(unsigned long *)(addr))
-+#define ext2_set_bit_atomic(lock,nr,addr) \
-+ test_and_set_le_bit((nr),(unsigned long *)(addr))
-+#define ext2_clear_bit(nr,addr) \
-+ __test_and_clear_le_bit((nr),(unsigned long *)(addr))
-+#define ext2_clear_bit_atomic(lock,nr,addr) \
-+ test_and_clear_le_bit((nr),(unsigned long *)(addr))
-+#define ext2_test_bit(nr,addr) \
-+ test_le_bit((nr),(unsigned long *)(addr))
-+#define ext2_find_first_zero_bit(addr, size) \
-+ find_first_zero_le_bit((unsigned long *)(addr), (size))
-+#define ext2_find_next_zero_bit(addr, size, off) \
-+ find_next_zero_le_bit((unsigned long *)(addr), (size), (off))
-
- /* Bitmap functions for the minix filesystem. */
--#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
--#define minix_set_bit(nr,addr) set_bit(nr,addr)
--#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
--#define minix_test_bit(nr,addr) test_bit(nr,addr)
--#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
-+#define minix_test_and_set_bit(nr,addr) \
-+ test_and_set_bit((nr),(unsigned long *)(addr))
-+#define minix_set_bit(nr,addr) \
-+ set_bit((nr),(unsigned long *)(addr))
-+#define minix_test_and_clear_bit(nr,addr) \
-+ test_and_clear_bit((nr),(unsigned long *)(addr))
-+#define minix_test_bit(nr,addr) \
-+ test_bit((nr),(unsigned long *)(addr))
-+#define minix_find_first_zero_bit(addr,size) \
-+ find_first_zero_bit((unsigned long *)(addr),(size))
-
- #endif /* __KERNEL__ */
-
-diff -Nur linux-2.4.29/include/asm-sparc64/param.h linux-mips/include/asm-sparc64/param.h
---- linux-2.4.29/include/asm-sparc64/param.h 2000-10-30 23:34:12.000000000 +0100
-+++ linux-mips/include/asm-sparc64/param.h 2000-11-23 03:00:56.000000000 +0100
-@@ -4,6 +4,9 @@
-
- #ifndef HZ
- #define HZ 100
-+#ifdef __KERNEL__
-+#define hz_to_std(a) (a)
-+#endif
- #endif
-
- #define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
-diff -Nur linux-2.4.29/include/asm-sparc64/system.h linux-mips/include/asm-sparc64/system.h
---- linux-2.4.29/include/asm-sparc64/system.h 2003-06-13 16:51:38.000000000 +0200
-+++ linux-mips/include/asm-sparc64/system.h 2005-03-26 11:47:37.092563999 +0100
-@@ -106,9 +106,9 @@
-
- #define nop() __asm__ __volatile__ ("nop")
-
--#define membar(type) __asm__ __volatile__ ("membar " type : : : "memory");
-+#define membar(type) __asm__ __volatile__ ("membar " type : : : "memory")
- #define mb() \
-- membar("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad");
-+ membar("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
- #define rmb() membar("#LoadLoad")
- #define wmb() membar("#StoreStore")
- #define set_mb(__var, __value) \
-@@ -121,9 +121,9 @@
- #define smp_rmb() rmb()
- #define smp_wmb() wmb()
- #else
--#define smp_mb() __asm__ __volatile__("":::"memory");
--#define smp_rmb() __asm__ __volatile__("":::"memory");
--#define smp_wmb() __asm__ __volatile__("":::"memory");
-+#define smp_mb() __asm__ __volatile__("":::"memory")
-+#define smp_rmb() __asm__ __volatile__("":::"memory")
-+#define smp_wmb() __asm__ __volatile__("":::"memory")
- #endif
-
- #define flushi(addr) __asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
-@@ -246,6 +246,7 @@
- extern __inline__ unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
- {
- __asm__ __volatile__(
-+" membar #StoreLoad | #LoadLoad\n"
- " mov %0, %%g5\n"
- "1: lduw [%2], %%g7\n"
- " cas [%2], %%g7, %0\n"
-@@ -262,6 +263,7 @@
- extern __inline__ unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
- {
- __asm__ __volatile__(
-+" membar #StoreLoad | #LoadLoad\n"
- " mov %0, %%g5\n"
- "1: ldx [%2], %%g7\n"
- " casx [%2], %%g7, %0\n"
-@@ -306,7 +308,8 @@
- extern __inline__ unsigned long
- __cmpxchg_u32(volatile int *m, int old, int new)
- {
-- __asm__ __volatile__("cas [%2], %3, %0\n\t"
-+ __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
-+ "cas [%2], %3, %0\n\t"
- "membar #StoreLoad | #StoreStore"
- : "=&r" (new)
- : "0" (new), "r" (m), "r" (old)
-@@ -318,7 +321,8 @@
- extern __inline__ unsigned long
- __cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
- {
-- __asm__ __volatile__("casx [%2], %3, %0\n\t"
-+ __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
-+ "casx [%2], %3, %0\n\t"
- "membar #StoreLoad | #StoreStore"
- : "=&r" (new)
- : "0" (new), "r" (m), "r" (old)
-diff -Nur linux-2.4.29/include/asm-x86_64/acpi.h linux-mips/include/asm-x86_64/acpi.h
---- linux-2.4.29/include/asm-x86_64/acpi.h 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/include/asm-x86_64/acpi.h 2005-03-26 11:47:37.164552184 +0100
-@@ -118,6 +118,7 @@
- extern int acpi_strict;
- extern int acpi_disabled;
- extern int acpi_ht;
-+extern int acpi_skip_timer_override;
- static inline void disable_acpi(void)
- {
- acpi_disabled = 1;
-diff -Nur linux-2.4.29/include/linux/ata.h linux-mips/include/linux/ata.h
---- linux-2.4.29/include/linux/ata.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/linux/ata.h 2005-03-26 11:47:37.226542010 +0100
-@@ -123,6 +123,8 @@
- ATA_CMD_PIO_WRITE_EXT = 0x34,
- ATA_CMD_SET_FEATURES = 0xEF,
- ATA_CMD_PACKET = 0xA0,
-+ ATA_CMD_VERIFY = 0x40,
-+ ATA_CMD_VERIFY_EXT = 0x42,
-
- /* SETFEATURES stuff */
- SETFEATURES_XFER = 0x03,
-diff -Nur linux-2.4.29/include/linux/brlock.h linux-mips/include/linux/brlock.h
---- linux-2.4.29/include/linux/brlock.h 2002-11-29 00:53:15.000000000 +0100
-+++ linux-mips/include/linux/brlock.h 2005-03-26 11:47:37.233540861 +0100
-@@ -18,16 +18,6 @@
- * Registry idea and naming [ crutial! :-) ] by:
- *
- * David S. Miller <davem@redhat.com>
-- *
-- * David has an implementation that doesn't use atomic operations in
-- * the read branch via memory ordering tricks - i guess we need to
-- * split this up into a per-arch thing? The atomicity issue is a
-- * secondary item in profiles, at least on x86 platforms.
-- *
-- * The atomic op version overhead is indeed a big deal on
-- * load-locked/store-conditional cpus (ALPHA/MIPS/PPC) and
-- * compare-and-swap cpus (Sparc64). So we control which
-- * implementation to use with a __BRLOCK_USE_ATOMICS define. -DaveM
- */
-
- /* Register bigreader lock indices here. */
-@@ -45,17 +35,7 @@
- #include <linux/cache.h>
- #include <linux/spinlock.h>
-
--#if defined(__i386__) || defined(__ia64__) || defined(__x86_64__)
--#define __BRLOCK_USE_ATOMICS
--#else
--#undef __BRLOCK_USE_ATOMICS
--#endif
--
--#ifdef __BRLOCK_USE_ATOMICS
--typedef rwlock_t brlock_read_lock_t;
--#else
- typedef unsigned int brlock_read_lock_t;
--#endif
-
- /*
- * align last allocated index to the next cacheline:
-@@ -65,39 +45,14 @@
-
- extern brlock_read_lock_t __brlock_array[NR_CPUS][__BR_IDX_MAX];
-
--#ifndef __BRLOCK_USE_ATOMICS
- struct br_wrlock {
- spinlock_t lock;
- } __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
-
- extern struct br_wrlock __br_write_locks[__BR_IDX_MAX];
--#endif
-
- extern void __br_lock_usage_bug (void);
-
--#ifdef __BRLOCK_USE_ATOMICS
--
--static inline void br_read_lock (enum brlock_indices idx)
--{
-- /*
-- * This causes a link-time bug message if an
-- * invalid index is used:
-- */
-- if (idx >= __BR_END)
-- __br_lock_usage_bug();
--
-- read_lock(&__brlock_array[smp_processor_id()][idx]);
--}
--
--static inline void br_read_unlock (enum brlock_indices idx)
--{
-- if (idx >= __BR_END)
-- __br_lock_usage_bug();
--
-- read_unlock(&__brlock_array[smp_processor_id()][idx]);
--}
--
--#else /* ! __BRLOCK_USE_ATOMICS */
- static inline void br_read_lock (enum brlock_indices idx)
- {
- unsigned int *ctr;
-@@ -149,7 +104,6 @@
- wmb();
- (*ctr)--;
- }
--#endif /* __BRLOCK_USE_ATOMICS */
+ #ifndef HZ
+ #define HZ 100
++#ifdef __KERNEL__
++#define hz_to_std(a) (a)
++#endif
+ #endif
- /* write path not inlined - it's rare and larger */
+ #define EXEC_PAGESIZE 4096
+diff -Nur linux-2.4.29/include/asm-sh/param.h linux-mips/include/asm-sh/param.h
+--- linux-2.4.29/include/asm-sh/param.h 2001-01-04 22:19:13.000000000 +0100
++++ linux-mips/include/asm-sh/param.h 2001-01-11 05:02:45.000000000 +0100
+@@ -3,6 +3,9 @@
-diff -Nur linux-2.4.29/include/linux/fs.h linux-mips/include/linux/fs.h
---- linux-2.4.29/include/linux/fs.h 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/include/linux/fs.h 2005-03-26 11:47:37.386515755 +0100
-@@ -576,6 +576,7 @@
- unsigned int f_uid, f_gid;
- int f_error;
+ #ifndef HZ
+ #define HZ 100
++#ifdef __KERNEL__
++#define hz_to_std(a) (a)
++#endif
+ #endif
-+ size_t f_maxcount;
- unsigned long f_version;
+ #define EXEC_PAGESIZE 4096
+diff -Nur linux-2.4.29/include/asm-sparc/param.h linux-mips/include/asm-sparc/param.h
+--- linux-2.4.29/include/asm-sparc/param.h 2000-10-30 23:34:12.000000000 +0100
++++ linux-mips/include/asm-sparc/param.h 2000-11-23 03:00:56.000000000 +0100
+@@ -4,6 +4,9 @@
- /* needed for tty driver, and maybe others */
-@@ -1056,14 +1057,7 @@
- return 0;
- }
+ #ifndef HZ
+ #define HZ 100
++#ifdef __KERNEL__
++#define hz_to_std(a) (a)
++#endif
+ #endif
--static inline int locks_verify_area(int read_write, struct inode *inode,
-- struct file *filp, loff_t offset,
-- size_t count)
--{
-- if (inode->i_flock && MANDATORY_LOCK(inode))
-- return locks_mandatory_area(read_write, inode, filp, offset, count);
-- return 0;
--}
-+extern int rw_verify_area(int, struct file *, loff_t *, size_t);
+ #define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
+diff -Nur linux-2.4.29/include/asm-sparc64/param.h linux-mips/include/asm-sparc64/param.h
+--- linux-2.4.29/include/asm-sparc64/param.h 2000-10-30 23:34:12.000000000 +0100
++++ linux-mips/include/asm-sparc64/param.h 2000-11-23 03:00:56.000000000 +0100
+@@ -4,6 +4,9 @@
+
+ #ifndef HZ
+ #define HZ 100
++#ifdef __KERNEL__
++#define hz_to_std(a) (a)
++#endif
+ #endif
- static inline int locks_verify_truncate(struct inode *inode,
- struct file *filp,
+ #define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
diff -Nur linux-2.4.29/include/linux/i2c-algo-au1550.h linux-mips/include/linux/i2c-algo-au1550.h
--- linux-2.4.29/include/linux/i2c-algo-au1550.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-mips/include/linux/i2c-algo-au1550.h 2004-07-07 02:38:02.000000000 +0200
/* --- SMBus only adapters */
#define I2C_HW_SMBUS_PIIX4 0x00
#define I2C_HW_SMBUS_ALI15X3 0x01
-diff -Nur linux-2.4.29/include/linux/jbd.h linux-mips/include/linux/jbd.h
---- linux-2.4.29/include/linux/jbd.h 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/include/linux/jbd.h 2005-03-26 11:47:37.416510832 +0100
-@@ -848,7 +848,7 @@
-
- extern int log_space_left (journal_t *); /* Called with journal locked */
- extern tid_t log_start_commit (journal_t *, transaction_t *);
--extern void log_wait_commit (journal_t *, tid_t);
-+extern int log_wait_commit (journal_t *, tid_t);
- extern int log_do_checkpoint (journal_t *, int);
-
- extern void log_wait_for_space(journal_t *, int nblocks);
-diff -Nur linux-2.4.29/include/linux/libata-compat.h linux-mips/include/linux/libata-compat.h
---- linux-2.4.29/include/linux/libata-compat.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/linux/libata-compat.h 2005-03-26 11:47:37.456504268 +0100
-@@ -1,8 +1,16 @@
- #ifndef __LIBATA_COMPAT_H__
- #define __LIBATA_COMPAT_H__
-
-+#include <linux/types.h>
- #include <linux/delay.h>
- #include <linux/pci.h>
-+#include <linux/slab.h>
-+
-+typedef u32 __le32;
-+typedef u64 __le64;
-+
-+#define DMA_64BIT_MASK 0xffffffffffffffffULL
-+#define DMA_32BIT_MASK 0x00000000ffffffffULL
-
- #define MODULE_VERSION(ver_str)
-
-@@ -10,11 +18,6 @@
- struct pci_dev pdev;
- };
-
--static inline void libata_msleep(unsigned long msecs)
--{
-- msleep(msecs);
--}
--
- static inline struct pci_dev *to_pci_dev(struct device *dev)
- {
- return (struct pci_dev *) dev;
-@@ -47,4 +50,13 @@
- #define dev_set_drvdata(dev,ptr) \
- pci_set_drvdata(to_pci_dev(dev),(ptr))
-
-+static inline void *kcalloc(size_t nmemb, size_t size, int flags)
-+{
-+ size_t total = nmemb * size;
-+ void *mem = kmalloc(total, flags);
-+ if (mem)
-+ memset(mem, 0, total);
-+ return mem;
-+}
-+
- #endif /* __LIBATA_COMPAT_H__ */
-diff -Nur linux-2.4.29/include/linux/libata.h linux-mips/include/linux/libata.h
---- linux-2.4.29/include/linux/libata.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/linux/libata.h 2005-03-26 11:47:37.460503612 +0100
-@@ -335,6 +335,8 @@
-
- void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
- u8 (*check_status)(struct ata_port *ap);
-+ u8 (*check_altstatus)(struct ata_port *ap);
-+ u8 (*check_err)(struct ata_port *ap);
- void (*dev_select)(struct ata_port *ap, unsigned int device);
-
- void (*phy_reset) (struct ata_port *ap);
-@@ -361,6 +363,9 @@
- void (*port_stop) (struct ata_port *ap);
-
- void (*host_stop) (struct ata_host_set *host_set);
-+
-+ void (*bmdma_stop) (struct ata_port *ap);
-+ u8 (*bmdma_status) (struct ata_port *ap);
- };
-
- struct ata_port_info {
-@@ -401,6 +406,8 @@
- extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device);
- extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
- extern u8 ata_check_status(struct ata_port *ap);
-+extern u8 ata_altstatus(struct ata_port *ap);
-+extern u8 ata_chk_err(struct ata_port *ap);
- extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
- extern int ata_port_start (struct ata_port *ap);
- extern void ata_port_stop (struct ata_port *ap);
-@@ -416,6 +423,8 @@
- unsigned int ofs, unsigned int len);
- extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
- extern void ata_bmdma_start (struct ata_queued_cmd *qc);
-+extern void ata_bmdma_stop(struct ata_port *ap);
-+extern u8 ata_bmdma_status(struct ata_port *ap);
- extern void ata_bmdma_irq_clear(struct ata_port *ap);
- extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
- extern void ata_eng_timeout(struct ata_port *ap);
-@@ -435,8 +444,6 @@
-
- extern struct ata_probe_ent *
- ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port);
--extern struct ata_probe_ent *
--ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port);
- extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits);
-
- #endif /* CONFIG_PCI */
-@@ -453,26 +460,11 @@
- (dev->class == ATA_DEV_ATAPI));
- }
-
--static inline u8 ata_chk_err(struct ata_port *ap)
--{
-- if (ap->flags & ATA_FLAG_MMIO) {
-- return readb((void __iomem *) ap->ioaddr.error_addr);
-- }
-- return inb(ap->ioaddr.error_addr);
--}
--
- static inline u8 ata_chk_status(struct ata_port *ap)
- {
- return ap->ops->check_status(ap);
- }
-
--static inline u8 ata_altstatus(struct ata_port *ap)
--{
-- if (ap->flags & ATA_FLAG_MMIO)
-- return readb((void __iomem *)ap->ioaddr.altstatus_addr);
-- return inb(ap->ioaddr.altstatus_addr);
--}
--
- static inline void ata_pause(struct ata_port *ap)
- {
- ata_altstatus(ap);
-@@ -596,46 +588,6 @@
- return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
- }
-
--static inline void ata_bmdma_stop(struct ata_port *ap)
--{
-- if (ap->flags & ATA_FLAG_MMIO) {
-- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
--
-- /* clear start/stop bit */
-- writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
-- mmio + ATA_DMA_CMD);
-- } else {
-- /* clear start/stop bit */
-- outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
-- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-- }
--
-- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-- ata_altstatus(ap); /* dummy read */
--}
--
--static inline void ata_bmdma_ack_irq(struct ata_port *ap)
--{
-- if (ap->flags & ATA_FLAG_MMIO) {
-- void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
-- writeb(readb(mmio), mmio);
-- } else {
-- unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
-- outb(inb(addr), addr);
-- }
--}
--
--static inline u8 ata_bmdma_status(struct ata_port *ap)
--{
-- u8 host_stat;
-- if (ap->flags & ATA_FLAG_MMIO) {
-- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-- host_stat = readb(mmio + ATA_DMA_STATUS);
-- } else
-- host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-- return host_stat;
--}
--
- static inline int ata_try_flush_cache(struct ata_device *dev)
- {
- return ata_id_wcache_enabled(dev->id) ||
-diff -Nur linux-2.4.29/include/linux/netfilter_ipv4/ip_conntrack.h linux-mips/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux-2.4.29/include/linux/netfilter_ipv4/ip_conntrack.h 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/include/linux/netfilter_ipv4/ip_conntrack.h 2005-03-26 11:47:37.735458485 +0100
-@@ -249,10 +249,9 @@
- /* Call me when a conntrack is destroyed. */
- extern void (*ip_conntrack_destroyed)(struct ip_conntrack *conntrack);
-
--extern int ip_ct_no_defrag;
- /* Returns new sk_buff, or NULL */
- struct sk_buff *
--ip_ct_gather_frags(struct sk_buff *skb);
-+ip_ct_gather_frags(struct sk_buff *skb, u_int32_t user);
-
- /* Delete all conntracks which match. */
- extern void
-diff -Nur linux-2.4.29/include/linux/netlink.h linux-mips/include/linux/netlink.h
---- linux-2.4.29/include/linux/netlink.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/linux/netlink.h 2005-03-26 11:47:37.463503119 +0100
-@@ -117,10 +117,9 @@
-
- /*
- * skb should fit one page. This choice is good for headerless malloc.
-- *
-- * FIXME: What is the best size for SLAB???? --ANK
- */
--#define NLMSG_GOODSIZE (PAGE_SIZE - ((sizeof(struct sk_buff)+0xF)&~0xF))
-+#define NLMSG_GOODORDER 0
-+#define NLMSG_GOODSIZE (SKB_MAX_ORDER(0, NLMSG_GOODORDER))
-
-
- struct netlink_callback
-diff -Nur linux-2.4.29/include/linux/pci_ids.h linux-mips/include/linux/pci_ids.h
---- linux-2.4.29/include/linux/pci_ids.h 2005-01-19 15:10:12.000000000 +0100
-+++ linux-mips/include/linux/pci_ids.h 2005-03-26 11:47:37.534491468 +0100
-@@ -1937,7 +1937,6 @@
- #define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
- #define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
- #define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7
--#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca
- #define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
- #define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
- #define PCI_DEVICE_ID_INTEL_ESB_0 0x25a0
diff -Nur linux-2.4.29/include/linux/sched.h linux-mips/include/linux/sched.h
--- linux-2.4.29/include/linux/sched.h 2005-01-19 15:10:12.000000000 +0100
+++ linux-mips/include/linux/sched.h 2004-11-29 18:47:18.000000000 +0100
#define SERIAL_IO_PORT 0
#define SERIAL_IO_HUB6 1
-diff -Nur linux-2.4.29/include/linux/skbuff.h linux-mips/include/linux/skbuff.h
---- linux-2.4.29/include/linux/skbuff.h 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/include/linux/skbuff.h 2005-03-26 11:47:37.600480638 +0100
-@@ -290,15 +290,11 @@
-
- static inline void kfree_skb(struct sk_buff *skb)
- {
-- if (atomic_read(&skb->users) == 1 || atomic_dec_and_test(&skb->users))
-- __kfree_skb(skb);
--}
--
--/* Use this if you didn't touch the skb state [for fast switching] */
--static inline void kfree_skb_fast(struct sk_buff *skb)
--{
-- if (atomic_read(&skb->users) == 1 || atomic_dec_and_test(&skb->users))
-- kfree_skbmem(skb);
-+ if (likely(atomic_read(&skb->users) == 1))
-+ smp_rmb();
-+ else if (likely(!atomic_dec_and_test(&skb->users)))
-+ return;
-+ __kfree_skb(skb);
- }
-
- /**
diff -Nur linux-2.4.29/include/linux/swap.h linux-mips/include/linux/swap.h
--- linux-2.4.29/include/linux/swap.h 2005-01-19 15:10:12.000000000 +0100
+++ linux-mips/include/linux/swap.h 2004-11-29 18:47:18.000000000 +0100
/*
* Max bad pages in the new format..
*/
-diff -Nur linux-2.4.29/include/linux/sysctl.h linux-mips/include/linux/sysctl.h
---- linux-2.4.29/include/linux/sysctl.h 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/include/linux/sysctl.h 2005-03-26 11:47:37.673468659 +0100
-@@ -326,6 +326,7 @@
- NET_TCP_BIC_LOW_WINDOW=104,
- NET_TCP_DEFAULT_WIN_SCALE=105,
- NET_TCP_MODERATE_RCVBUF=106,
-+ NET_TCP_BIC_BETA=108,
- };
-
- enum {
-diff -Nur linux-2.4.29/include/net/dst.h linux-mips/include/net/dst.h
---- linux-2.4.29/include/net/dst.h 2003-08-25 13:44:44.000000000 +0200
-+++ linux-mips/include/net/dst.h 2005-03-26 11:47:37.821444373 +0100
-@@ -104,8 +104,10 @@
- static inline
- void dst_release(struct dst_entry * dst)
- {
-- if (dst)
-+ if (dst) {
-+ smp_mb__before_atomic_dec();
- atomic_dec(&dst->__refcnt);
-+ }
- }
-
- extern void * dst_alloc(struct dst_ops * ops);
-diff -Nur linux-2.4.29/include/net/ip.h linux-mips/include/net/ip.h
---- linux-2.4.29/include/net/ip.h 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/include/net/ip.h 2005-03-26 11:47:37.822444209 +0100
-@@ -227,9 +227,19 @@
- /*
- * Functions provided by ip_fragment.o
- */
--
--struct sk_buff *ip_defrag(struct sk_buff *skb);
--extern void ipfrag_flush(void);
-+
-+enum ip_defrag_users
-+{
-+ IP_DEFRAG_LOCAL_DELIVER,
-+ IP_DEFRAG_CALL_RA_CHAIN,
-+ IP_DEFRAG_CONNTRACK_IN,
-+ IP_DEFRAG_CONNTRACK_OUT,
-+ IP_DEFRAG_NAT_OUT,
-+ IP_DEFRAG_VS_OUT,
-+ IP_DEFRAG_VS_FWD
-+};
-+
-+struct sk_buff *ip_defrag(struct sk_buff *skb, u32 user);
- extern int ip_frag_nqueues;
- extern atomic_t ip_frag_mem;
-
-diff -Nur linux-2.4.29/include/net/tcp.h linux-mips/include/net/tcp.h
---- linux-2.4.29/include/net/tcp.h 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/include/net/tcp.h 2005-03-26 11:47:37.891432886 +0100
-@@ -395,9 +395,8 @@
- # define TCP_TW_RECYCLE_TICK (12+2-TCP_TW_RECYCLE_SLOTS_LOG)
- #endif
-
--#define BICTCP_1_OVER_BETA 8 /*
-- * Fast recovery
-- * multiplicative decrease factor
-+#define BICTCP_BETA_SCALE 1024 /* Scale factor beta calculation
-+ * max_cwnd = snd_cwnd * beta
- */
- #define BICTCP_MAX_INCREMENT 32 /*
- * Limit on the amount of
-@@ -491,6 +490,7 @@
- extern int sysctl_tcp_bic;
- extern int sysctl_tcp_bic_fast_convergence;
- extern int sysctl_tcp_bic_low_window;
-+extern int sysctl_tcp_bic_beta;
- extern int sysctl_tcp_default_win_scale;
- extern int sysctl_tcp_moderate_rcvbuf;
-
-@@ -1132,15 +1132,16 @@
- if (tcp_is_bic(tp)) {
- if (sysctl_tcp_bic_fast_convergence &&
- tp->snd_cwnd < tp->bictcp.last_max_cwnd)
-- tp->bictcp.last_max_cwnd
-- = (tp->snd_cwnd * (2*BICTCP_1_OVER_BETA-1))
-- / (BICTCP_1_OVER_BETA/2);
-+ tp->bictcp.last_max_cwnd = (tp->snd_cwnd *
-+ (BICTCP_BETA_SCALE
-+ + sysctl_tcp_bic_beta))
-+ / (2 * BICTCP_BETA_SCALE);
- else
- tp->bictcp.last_max_cwnd = tp->snd_cwnd;
-
- if (tp->snd_cwnd > sysctl_tcp_bic_low_window)
-- return max(tp->snd_cwnd - (tp->snd_cwnd/BICTCP_1_OVER_BETA),
-- 2U);
-+ return max((tp->snd_cwnd * sysctl_tcp_bic_beta)
-+ / BICTCP_BETA_SCALE, 2U);
- }
-
- return max(tp->snd_cwnd >> 1U, 2U);
diff -Nur linux-2.4.29/include/video/newport.h linux-mips/include/video/newport.h
--- linux-2.4.29/include/video/newport.h 2001-04-12 21:20:31.000000000 +0200
+++ linux-mips/include/video/newport.h 2004-09-23 15:32:29.000000000 +0200
}
/*
-diff -Nur linux-2.4.29/lib/brlock.c linux-mips/lib/brlock.c
---- linux-2.4.29/lib/brlock.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/lib/brlock.c 2005-03-26 11:47:38.065404334 +0100
-@@ -15,29 +15,6 @@
- #include <linux/sched.h>
- #include <linux/brlock.h>
-
--#ifdef __BRLOCK_USE_ATOMICS
--
--brlock_read_lock_t __brlock_array[NR_CPUS][__BR_IDX_MAX] =
-- { [0 ... NR_CPUS-1] = { [0 ... __BR_IDX_MAX-1] = RW_LOCK_UNLOCKED } };
--
--void fastcall __br_write_lock (enum brlock_indices idx)
--{
-- int i;
--
-- for (i = 0; i < smp_num_cpus; i++)
-- write_lock(&__brlock_array[cpu_logical_map(i)][idx]);
--}
--
--void fastcall __br_write_unlock (enum brlock_indices idx)
--{
-- int i;
--
-- for (i = 0; i < smp_num_cpus; i++)
-- write_unlock(&__brlock_array[cpu_logical_map(i)][idx]);
--}
--
--#else /* ! __BRLOCK_USE_ATOMICS */
--
- brlock_read_lock_t __brlock_array[NR_CPUS][__BR_IDX_MAX] =
- { [0 ... NR_CPUS-1] = { [0 ... __BR_IDX_MAX-1] = 0 } };
-
-@@ -64,6 +41,4 @@
- spin_unlock(&__br_write_locks[idx].lock);
- }
-
--#endif /* __BRLOCK_USE_ATOMICS */
--
- #endif /* CONFIG_SMP */
diff -Nur linux-2.4.29/lib/Makefile linux-mips/lib/Makefile
--- linux-2.4.29/lib/Makefile 2004-04-14 15:05:40.000000000 +0200
+++ linux-mips/lib/Makefile 2004-04-16 05:14:21.000000000 +0200
include $(TOPDIR)/drivers/net/Makefile.lib
include $(TOPDIR)/drivers/usb/Makefile.lib
include $(TOPDIR)/drivers/bluetooth/Makefile.lib
-diff -Nur linux-2.4.29/MAINTAINERS linux-mips/MAINTAINERS
---- linux-2.4.29/MAINTAINERS 2005-01-19 15:09:24.000000000 +0100
-+++ linux-mips/MAINTAINERS 2005-03-26 11:47:05.618729582 +0100
-@@ -1058,8 +1058,8 @@
- JFS FILESYSTEM
- P: Dave Kleikamp
- M: shaggy@austin.ibm.com
--L: jfs-discussion@oss.software.ibm.com
--W: http://oss.software.ibm.com/developerworks/opensource/jfs/
-+L: jfs-discussion@lists.sourceforge.net
-+W: http://jfs.sourceforge.net/
- S: Supported
-
- JOYSTICK DRIVER
-@@ -1532,7 +1532,7 @@
-
- PPP OVER ETHERNET
- P: Michal Ostrowski
--M: mostrows@styx.uwaterloo.ca
-+M: mostrows@speakeasy.net
- S: Maintained
-
- PRISM54 WIRELESS DRIVER
diff -Nur linux-2.4.29/Makefile linux-mips/Makefile
--- linux-2.4.29/Makefile 2005-01-19 15:10:14.000000000 +0100
-+++ linux-mips/Makefile 2005-03-26 11:47:05.686718424 +0100
-@@ -1,11 +1,11 @@
- VERSION = 2
- PATCHLEVEL = 4
--SUBLEVEL = 29
--EXTRAVERSION =
-+SUBLEVEL = 30
-+EXTRAVERSION = -pre3
++++ linux-mips/Makefile 2005-01-20 03:19:21.000000000 +0100
+@@ -5,7 +5,7 @@
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
dep-files: scripts/mkdep archdep include/linux/version.h
rm -f .depend .hdepend
-diff -Nur linux-2.4.29/mm/filemap.c linux-mips/mm/filemap.c
---- linux-2.4.29/mm/filemap.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/mm/filemap.c 2005-03-26 11:47:38.292367084 +0100
-@@ -1870,7 +1870,7 @@
- goto fput_in;
- if (!in_inode->i_mapping->a_ops->readpage)
- goto fput_in;
-- retval = locks_verify_area(FLOCK_VERIFY_READ, in_inode, in_file, in_file->f_pos, count);
-+ retval = rw_verify_area(READ, in_file, &in_file->f_pos, count);
- if (retval)
- goto fput_in;
-
-@@ -1887,7 +1887,7 @@
- if (!out_file->f_op || !out_file->f_op->write)
- goto fput_out;
- out_inode = out_file->f_dentry->d_inode;
-- retval = locks_verify_area(FLOCK_VERIFY_WRITE, out_inode, out_file, out_file->f_pos, count);
-+ retval = rw_verify_area(WRITE, out_file, &out_file->f_pos, count);
- if (retval)
- goto fput_out;
-
-@@ -2589,7 +2589,7 @@
- long error = -EBADF;
- struct file * file;
- struct inode * inode;
-- unsigned long size, rlim_rss;
-+ unsigned long size;
-
- /* Doesn't work if there's no mapped file. */
- if (!vma->vm_file)
-@@ -2605,13 +2605,6 @@
- end = vma->vm_end;
- end = ((end - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
-
-- /* Make sure this doesn't exceed the process's max rss. */
-- error = -EIO;
-- rlim_rss = current->rlim ? current->rlim[RLIMIT_RSS].rlim_cur :
-- LONG_MAX; /* default: see resource.h */
-- if ((vma->vm_mm->rss + (end - start)) > rlim_rss)
-- return error;
--
- /* round to cluster boundaries if this isn't a "random" area. */
- if (!VM_RandomReadHint(vma)) {
- start = CLUSTER_OFFSET(start);
-@@ -3268,7 +3261,12 @@
- status = generic_osync_inode(inode, OSYNC_METADATA|OSYNC_DATA);
- }
-
-- err = written ? written : status;
-+ /*
-+ * generic_osync_inode always returns 0 or negative value.
-+ * So 'status < written' is always true, and written should
-+ * be returned if status >= 0.
-+ */
-+ err = (status < 0) ? status : written;
- out:
-
- return err;
-diff -Nur linux-2.4.29/mm/swapfile.c linux-mips/mm/swapfile.c
---- linux-2.4.29/mm/swapfile.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/mm/swapfile.c 2005-03-26 11:47:38.293366920 +0100
-@@ -738,8 +738,10 @@
- for (type = swap_list.head; type >= 0; type = swap_info[type].next) {
- p = swap_info + type;
- if ((p->flags & SWP_WRITEOK) == SWP_WRITEOK) {
-- if (p->swap_file == nd.dentry)
-- break;
-+ if (p->swap_file == nd.dentry ||
-+ (S_ISBLK(nd.dentry->d_inode->i_mode) &&
-+ p->swap_device == nd.dentry->d_inode->i_rdev))
-+ break;
- }
- prev = type;
- }
-diff -Nur linux-2.4.29/net/core/dev.c linux-mips/net/core/dev.c
---- linux-2.4.29/net/core/dev.c 2004-04-14 15:05:41.000000000 +0200
-+++ linux-mips/net/core/dev.c 2005-03-26 11:47:38.556323762 +0100
-@@ -2180,10 +2180,26 @@
- case SIOCSIFNAME:
- if (dev->flags&IFF_UP)
- return -EBUSY;
-- if (__dev_get_by_name(ifr->ifr_newname))
-- return -EEXIST;
-- memcpy(dev->name, ifr->ifr_newname, IFNAMSIZ);
-- dev->name[IFNAMSIZ-1] = 0;
-+ /* Check if name contains a wildcard */
-+ if (strchr(ifr->ifr_newname, '%')) {
-+ char format[IFNAMSIZ + 1];
-+ int ret;
-+ memcpy(format, ifr->ifr_newname, IFNAMSIZ);
-+ format[IFNAMSIZ-1] = 0;
-+ /* Find a free name based on format.
-+ * dev_alloc_name() replaces "%d" with at max
-+ * 2 digits, so no name overflow. - Jean II */
-+ ret = dev_alloc_name(dev, format);
-+ if (ret < 0)
-+ return ret;
-+ /* Copy the new name back to caller. */
-+ strncpy(ifr->ifr_newname, dev->name, IFNAMSIZ);
-+ } else {
-+ if (__dev_get_by_name(ifr->ifr_newname))
-+ return -EEXIST;
-+ memcpy(dev->name, ifr->ifr_newname, IFNAMSIZ);
-+ dev->name[IFNAMSIZ-1] = 0;
-+ }
- notifier_call_chain(&netdev_chain, NETDEV_CHANGENAME, dev);
- return 0;
-
-@@ -2316,6 +2332,7 @@
- * - return a value
- */
-
-+ case SIOCSIFNAME:
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
-@@ -2351,7 +2368,6 @@
- case SIOCDELMULTI:
- case SIOCSIFHWBROADCAST:
- case SIOCSIFTXQLEN:
-- case SIOCSIFNAME:
- case SIOCSMIIREG:
- case SIOCBONDENSLAVE:
- case SIOCBONDRELEASE:
-diff -Nur linux-2.4.29/net/core/dst.c linux-mips/net/core/dst.c
---- linux-2.4.29/net/core/dst.c 2003-08-25 13:44:44.000000000 +0200
-+++ linux-mips/net/core/dst.c 2005-03-26 11:47:38.557323598 +0100
-@@ -142,8 +142,13 @@
-
- void dst_destroy(struct dst_entry * dst)
- {
-- struct neighbour *neigh = dst->neighbour;
-- struct hh_cache *hh = dst->hh;
-+ struct neighbour *neigh;
-+ struct hh_cache *hh;
-+
-+ smp_rmb();
-+
-+ neigh = dst->neighbour;
-+ hh = dst->hh;
-
- dst->hh = NULL;
- if (hh && atomic_dec_and_test(&hh->hh_refcnt))
-diff -Nur linux-2.4.29/net/core/neighbour.c linux-mips/net/core/neighbour.c
---- linux-2.4.29/net/core/neighbour.c 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/net/core/neighbour.c 2005-03-26 11:47:38.629311783 +0100
-@@ -111,7 +111,7 @@
-
- unsigned long neigh_rand_reach_time(unsigned long base)
- {
-- return (net_random() % base) + (base>>1);
-+ return (base ? (net_random() % base) + (base >> 1) : 0);
- }
-
-
-@@ -1469,6 +1469,7 @@
-
- nlh = NLMSG_PUT(skb, pid, seq, event, sizeof(*ndm));
- ndm = NLMSG_DATA(nlh);
-+ nlh->nlmsg_flags = pid ? NLM_F_MULTI : 0;
- ndm->ndm_family = n->ops->family;
- ndm->ndm_flags = n->flags;
- ndm->ndm_type = n->type;
-diff -Nur linux-2.4.29/net/ipv4/ipconfig.c linux-mips/net/ipv4/ipconfig.c
---- linux-2.4.29/net/ipv4/ipconfig.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/net/ipv4/ipconfig.c 2005-03-26 11:47:38.712298163 +0100
-@@ -1162,7 +1162,7 @@
- if (*cp == ':')
- *cp++ = '\0';
- addr = in_aton(name);
-- strcpy(name, cp);
-+ memmove(name, cp, strlen(cp) + 1);
- } else
- addr = INADDR_NONE;
-
-diff -Nur linux-2.4.29/net/ipv4/ip_fragment.c linux-mips/net/ipv4/ip_fragment.c
---- linux-2.4.29/net/ipv4/ip_fragment.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/net/ipv4/ip_fragment.c 2005-03-26 11:47:38.632311291 +0100
-@@ -72,6 +72,7 @@
- struct ipq {
- struct ipq *next; /* linked list pointers */
- struct list_head lru_list; /* lru list member */
-+ u32 user;
- u32 saddr;
- u32 daddr;
- u16 id;
-@@ -242,13 +243,13 @@
- /* Memory limiting on fragments. Evictor trashes the oldest
- * fragment queue until we are back under the threshold.
- */
--static void __ip_evictor(int threshold)
-+static void ip_evictor(void)
- {
- struct ipq *qp;
- struct list_head *tmp;
- int work;
-
-- work = atomic_read(&ip_frag_mem) - threshold;
-+ work = atomic_read(&ip_frag_mem) - sysctl_ipfrag_low_thresh;
- if (work <= 0)
- return;
-
-@@ -273,11 +274,6 @@
- }
- }
-
--static inline void ip_evictor(void)
--{
-- __ip_evictor(sysctl_ipfrag_low_thresh);
--}
--
- /*
- * Oops, a fragment queue timed out. Kill it and send an ICMP reply.
- */
-@@ -324,7 +320,8 @@
- if(qp->id == qp_in->id &&
- qp->saddr == qp_in->saddr &&
- qp->daddr == qp_in->daddr &&
-- qp->protocol == qp_in->protocol) {
-+ qp->protocol == qp_in->protocol &&
-+ qp->user == qp_in->user) {
- atomic_inc(&qp->refcnt);
- write_unlock(&ipfrag_lock);
- qp_in->last_in |= COMPLETE;
-@@ -351,7 +348,7 @@
- }
-
- /* Add an entry to the 'ipq' queue for a newly received IP datagram. */
--static struct ipq *ip_frag_create(unsigned hash, struct iphdr *iph)
-+static struct ipq *ip_frag_create(unsigned hash, struct iphdr *iph, u32 user)
- {
- struct ipq *qp;
-
-@@ -363,6 +360,7 @@
- qp->id = iph->id;
- qp->saddr = iph->saddr;
- qp->daddr = iph->daddr;
-+ qp->user = user;
- qp->len = 0;
- qp->meat = 0;
- qp->fragments = NULL;
-@@ -385,7 +383,7 @@
- /* Find the correct entry in the "incomplete datagrams" queue for
- * this IP datagram, and create new one, if nothing is found.
- */
--static inline struct ipq *ip_find(struct iphdr *iph)
-+static inline struct ipq *ip_find(struct iphdr *iph, u32 user)
- {
- __u16 id = iph->id;
- __u32 saddr = iph->saddr;
-@@ -399,7 +397,8 @@
- if(qp->id == id &&
- qp->saddr == saddr &&
- qp->daddr == daddr &&
-- qp->protocol == protocol) {
-+ qp->protocol == protocol &&
-+ qp->user == user) {
- atomic_inc(&qp->refcnt);
- read_unlock(&ipfrag_lock);
- return qp;
-@@ -407,7 +406,7 @@
- }
- read_unlock(&ipfrag_lock);
-
-- return ip_frag_create(hash, iph);
-+ return ip_frag_create(hash, iph, user);
- }
-
- /* Add new segment to existing queue. */
-@@ -641,7 +640,7 @@
- }
-
- /* Process an incoming IP datagram fragment. */
--struct sk_buff *ip_defrag(struct sk_buff *skb)
-+struct sk_buff *ip_defrag(struct sk_buff *skb, u32 user)
- {
- struct iphdr *iph = skb->nh.iph;
- struct ipq *qp;
-@@ -656,7 +655,7 @@
- dev = skb->dev;
-
- /* Lookup (or create) queue header */
-- if ((qp = ip_find(iph)) != NULL) {
-+ if ((qp = ip_find(iph, user)) != NULL) {
- struct sk_buff *ret = NULL;
-
- spin_lock(&qp->lock);
-@@ -687,8 +686,3 @@
- ipfrag_secret_timer.expires = jiffies + sysctl_ipfrag_secret_interval;
- add_timer(&ipfrag_secret_timer);
- }
--
--void ipfrag_flush(void)
--{
-- __ip_evictor(0);
--}
-diff -Nur linux-2.4.29/net/ipv4/ip_input.c linux-mips/net/ipv4/ip_input.c
---- linux-2.4.29/net/ipv4/ip_input.c 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/net/ipv4/ip_input.c 2005-03-26 11:47:38.711298328 +0100
-@@ -170,7 +170,7 @@
- && ((sk->bound_dev_if == 0)
- || (sk->bound_dev_if == skb->dev->ifindex))) {
- if (skb->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
-- skb = ip_defrag(skb);
-+ skb = ip_defrag(skb, IP_DEFRAG_CALL_RA_CHAIN);
- if (skb == NULL) {
- read_unlock(&ip_ra_lock);
- return 1;
-@@ -291,7 +291,7 @@
- */
-
- if (skb->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
-- skb = ip_defrag(skb);
-+ skb = ip_defrag(skb, IP_DEFRAG_LOCAL_DELIVER);
- if (!skb)
- return 0;
- }
-diff -Nur linux-2.4.29/net/ipv4/ipvs/ip_vs_core.c linux-mips/net/ipv4/ipvs/ip_vs_core.c
---- linux-2.4.29/net/ipv4/ipvs/ip_vs_core.c 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/net/ipv4/ipvs/ip_vs_core.c 2005-03-26 11:47:38.913265180 +0100
-@@ -506,7 +506,7 @@
-
- /* reassemble IP fragments, but will it happen in ICMP packets?? */
- if (skb->nh.iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) {
-- skb = ip_defrag(skb);
-+ skb = ip_defrag(skb, IP_DEFRAG_VS_OUT);
- if (!skb)
- return NF_STOLEN;
- *skb_p = skb;
-@@ -658,7 +658,7 @@
-
- /* reassemble IP fragments */
- if (iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) {
-- skb = ip_defrag(skb);
-+ skb = ip_defrag(skb, IP_DEFRAG_VS_OUT);
- if (!skb)
- return NF_STOLEN;
- iph = skb->nh.iph;
-@@ -1164,7 +1164,7 @@
- return NF_ACCEPT;
-
- if (iph->frag_off & __constant_htons(IP_MF|IP_OFFSET)) {
-- skb = ip_defrag(skb);
-+ skb = ip_defrag(skb, IP_DEFRAG_VS_FWD);
- if (!skb)
- return NF_STOLEN;
- *skb_p = skb;
-diff -Nur linux-2.4.29/net/ipv4/netfilter/ip_conntrack_core.c linux-mips/net/ipv4/netfilter/ip_conntrack_core.c
---- linux-2.4.29/net/ipv4/netfilter/ip_conntrack_core.c 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/net/ipv4/netfilter/ip_conntrack_core.c 2005-03-26 11:47:38.949259273 +0100
-@@ -834,7 +834,10 @@
-
- /* Gather fragments. */
- if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
-- *pskb = ip_ct_gather_frags(*pskb);
-+ *pskb = ip_ct_gather_frags(*pskb,
-+ hooknum == NF_IP_PRE_ROUTING ?
-+ IP_DEFRAG_CONNTRACK_IN :
-+ IP_DEFRAG_CONNTRACK_OUT);
- if (!*pskb)
- return NF_STOLEN;
- }
-@@ -1183,29 +1186,22 @@
- WRITE_UNLOCK(&ip_conntrack_lock);
- }
-
--int ip_ct_no_defrag;
--
- /* Returns new sk_buff, or NULL */
- struct sk_buff *
--ip_ct_gather_frags(struct sk_buff *skb)
-+ip_ct_gather_frags(struct sk_buff *skb, u_int32_t user)
- {
- struct sock *sk = skb->sk;
- #ifdef CONFIG_NETFILTER_DEBUG
- unsigned int olddebug = skb->nf_debug;
- #endif
-
-- if (unlikely(ip_ct_no_defrag)) {
-- kfree_skb(skb);
-- return NULL;
-- }
--
- if (sk) {
- sock_hold(sk);
- skb_orphan(skb);
- }
-
- local_bh_disable();
-- skb = ip_defrag(skb);
-+ skb = ip_defrag(skb, user);
- local_bh_enable();
-
- if (!skb) {
-diff -Nur linux-2.4.29/net/ipv4/netfilter/ip_conntrack_standalone.c linux-mips/net/ipv4/netfilter/ip_conntrack_standalone.c
---- linux-2.4.29/net/ipv4/netfilter/ip_conntrack_standalone.c 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/net/ipv4/netfilter/ip_conntrack_standalone.c 2005-03-26 11:47:38.951258945 +0100
-@@ -393,13 +393,6 @@
- cleanup_inandlocalops:
- nf_unregister_hook(&ip_conntrack_local_out_ops);
- cleanup_inops:
-- /* Frag queues may hold fragments with skb->dst == NULL */
-- ip_ct_no_defrag = 1;
-- local_bh_disable();
-- br_write_lock(BR_NETPROTO_LOCK);
-- br_write_unlock(BR_NETPROTO_LOCK);
-- ipfrag_flush();
-- local_bh_enable();
- nf_unregister_hook(&ip_conntrack_in_ops);
- cleanup_proc:
- proc_net_remove("ip_conntrack");
-diff -Nur linux-2.4.29/net/ipv4/netfilter/ip_fw_compat.c linux-mips/net/ipv4/netfilter/ip_fw_compat.c
---- linux-2.4.29/net/ipv4/netfilter/ip_fw_compat.c 2003-11-28 19:26:21.000000000 +0100
-+++ linux-mips/net/ipv4/netfilter/ip_fw_compat.c 2005-03-26 11:47:38.979254350 +0100
-@@ -108,7 +108,7 @@
- (*pskb)->nh.raw, &redirpt, pskb);
-
- if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
-- *pskb = ip_ct_gather_frags(*pskb);
-+ *pskb = ip_ct_gather_frags(*pskb, IP_DEFRAG_CONNTRACK_IN);
-
- if (!*pskb)
- return NF_STOLEN;
-diff -Nur linux-2.4.29/net/ipv4/netfilter/ip_nat_standalone.c linux-mips/net/ipv4/netfilter/ip_nat_standalone.c
---- linux-2.4.29/net/ipv4/netfilter/ip_nat_standalone.c 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/net/ipv4/netfilter/ip_nat_standalone.c 2005-03-26 11:47:38.980254186 +0100
-@@ -201,7 +201,7 @@
- I'm starting to have nightmares about fragments. */
-
- if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
-- *pskb = ip_ct_gather_frags(*pskb);
-+ *pskb = ip_ct_gather_frags(*pskb, IP_DEFRAG_NAT_OUT);
-
- if (!*pskb)
- return NF_STOLEN;
-diff -Nur linux-2.4.29/net/ipv4/sysctl_net_ipv4.c linux-mips/net/ipv4/sysctl_net_ipv4.c
---- linux-2.4.29/net/ipv4/sysctl_net_ipv4.c 2004-08-08 01:26:06.000000000 +0200
-+++ linux-mips/net/ipv4/sysctl_net_ipv4.c 2005-03-26 11:47:38.713297999 +0100
-@@ -268,6 +268,9 @@
- {NET_TCP_MODERATE_RCVBUF, "tcp_moderate_rcvbuf",
- &sysctl_tcp_moderate_rcvbuf, sizeof(int), 0644, NULL,
- &proc_dointvec},
-+ {NET_TCP_BIC_BETA, "tcp_bic_beta",
-+ &sysctl_tcp_bic_beta, sizeof(int), 0644, NULL,
-+ &proc_dointvec},
- {0}
- };
-
-diff -Nur linux-2.4.29/net/ipv4/tcp_input.c linux-mips/net/ipv4/tcp_input.c
---- linux-2.4.29/net/ipv4/tcp_input.c 2005-01-19 15:10:13.000000000 +0100
-+++ linux-mips/net/ipv4/tcp_input.c 2005-03-26 11:47:38.911265508 +0100
-@@ -107,6 +107,7 @@
- int sysctl_tcp_bic;
- int sysctl_tcp_bic_fast_convergence = 1;
- int sysctl_tcp_bic_low_window = 14;
-+int sysctl_tcp_bic_beta = 819; /* = 819/1024 (BICTCP_BETA_SCALE) */
-
- #define FLAG_DATA 0x01 /* Incoming frame contained data. */
- #define FLAG_WIN_UPDATE 0x02 /* Incoming ACK was a window update. */
-@@ -3647,8 +3648,7 @@
- while (before(start, end)) {
- struct sk_buff *nskb;
- int header = skb_headroom(skb);
-- int copy = (PAGE_SIZE - sizeof(struct sk_buff) -
-- sizeof(struct skb_shared_info) - header - 31)&~15;
-+ int copy = SKB_MAX_ORDER(header, 0);
-
- /* Too big header? This can happen with IPv6. */
- if (copy < 0)
-diff -Nur linux-2.4.29/net/netlink/af_netlink.c linux-mips/net/netlink/af_netlink.c
---- linux-2.4.29/net/netlink/af_netlink.c 2005-01-19 15:10:14.000000000 +0100
-+++ linux-mips/net/netlink/af_netlink.c 2005-03-26 11:47:39.200218085 +0100
-@@ -327,10 +327,11 @@
- struct sock **skp;
- struct netlink_table *table = &nl_table[sk->protocol];
- struct nl_pid_hash *hash = &table->hash;
-+ u32 pid = nlk_sk(sk)->pid;
-
- netlink_table_grab();
- hash->entries--;
-- for (skp = hash->table; *skp; skp = &((*skp)->next)) {
-+ for (skp = nl_pid_hashfn(hash, pid); *skp; skp = &((*skp)->next)) {
- if (*skp == sk) {
- *skp = sk->next;
- __sock_put(sk);
-diff -Nur linux-2.4.29/net/netsyms.c linux-mips/net/netsyms.c
---- linux-2.4.29/net/netsyms.c 2005-01-19 15:10:14.000000000 +0100
-+++ linux-mips/net/netsyms.c 2005-03-26 11:47:38.458339844 +0100
-@@ -287,7 +287,6 @@
- EXPORT_SYMBOL(inetdev_by_index);
- EXPORT_SYMBOL(in_dev_finish_destroy);
- EXPORT_SYMBOL(ip_defrag);
--EXPORT_SYMBOL(ipfrag_flush);
-
- /* Route manipulation */
- EXPORT_SYMBOL(ip_rt_ioctl);
-diff -Nur linux-2.4.29/net/sched/cls_u32.c linux-mips/net/sched/cls_u32.c
---- linux-2.4.29/net/sched/cls_u32.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/net/sched/cls_u32.c 2005-03-26 11:47:39.202217756 +0100
-@@ -70,6 +70,7 @@
- {
- struct tc_u_hnode *next;
- u32 handle;
-+ u32 prio;
- struct tc_u_common *tp_c;
- int refcnt;
- unsigned divisor;
-@@ -271,6 +272,7 @@
- root_ht->divisor = 0;
- root_ht->refcnt++;
- root_ht->handle = tp_c ? gen_new_htid(tp_c) : 0x80000000;
-+ root_ht->prio = tp->prio;
-
- if (tp_c == NULL) {
- tp_c = kmalloc(sizeof(*tp_c), GFP_KERNEL);
-@@ -534,6 +536,7 @@
- ht->refcnt = 0;
- ht->divisor = divisor;
- ht->handle = handle;
-+ ht->prio = tp->prio;
- ht->next = tp_c->hlist;
- tp_c->hlist = ht;
- *arg = (unsigned long)ht;
-@@ -606,6 +609,8 @@
- return;
-
- for (ht = tp_c->hlist; ht; ht = ht->next) {
-+ if (ht->prio != tp->prio)
-+ continue;
- if (arg->count >= arg->skip) {
- if (arg->fn(tp, (unsigned long)ht, arg) < 0) {
- arg->stop = 1;
-diff -Nur linux-2.4.29/net/sched/sch_ingress.c linux-mips/net/sched/sch_ingress.c
---- linux-2.4.29/net/sched/sch_ingress.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/net/sched/sch_ingress.c 2005-03-26 11:47:39.203217592 +0100
-@@ -14,6 +14,7 @@
- #include <linux/netdevice.h>
- #include <linux/rtnetlink.h>
- #include <linux/netfilter_ipv4.h>
-+#include <linux/netfilter_ipv6.h>
- #include <linux/netfilter.h>
- #include <linux/smp.h>
- #include <net/pkt_sched.h>
-@@ -241,6 +242,15 @@
- NF_IP_PRI_FILTER + 1
- };
-
-+static struct nf_hook_ops ing6_ops =
-+{
-+ { NULL, NULL},
-+ ing_hook,
-+ PF_INET6,
-+ NF_IP6_PRE_ROUTING,
-+ NF_IP6_PRI_FILTER + 1
-+};
-+
- int ingress_init(struct Qdisc *sch,struct rtattr *opt)
- {
- struct ingress_qdisc_data *p = PRIV(sch);
-@@ -249,8 +259,13 @@
- if (nf_register_hook(&ing_ops) < 0) {
- printk("ingress qdisc registration error \n");
- goto error;
-- }
-+ }
- nf_registered++;
-+ if (nf_register_hook(&ing6_ops) < 0) {
-+ printk("IPv6 ingress qdisc registration error, " \
-+ "disabling IPv6 support.\n");
-+ } else
-+ nf_registered++;
- }
-
- DPRINTK("ingress_init(sch %p,[qdisc %p],opt %p)\n",sch,p,opt);
-@@ -374,8 +389,11 @@
- void cleanup_module(void)
- {
- unregister_qdisc(&ingress_qdisc_ops);
-- if (nf_registered)
-+ if (nf_registered) {
- nf_unregister_hook(&ing_ops);
-+ if (nf_registered > 1)
-+ nf_unregister_hook(&ing6_ops);
-+ }
- }
- #endif
- MODULE_LICENSE("GPL");
-diff -Nur linux-2.4.29/net/sched/sch_netem.c linux-mips/net/sched/sch_netem.c
---- linux-2.4.29/net/sched/sch_netem.c 2005-01-19 15:10:14.000000000 +0100
-+++ linux-mips/net/sched/sch_netem.c 2005-03-26 11:47:39.283204465 +0100
-@@ -180,6 +180,7 @@
- if (q->loss && q->loss >= get_crandom(&q->loss_cor)) {
- pr_debug("netem_enqueue: random loss\n");
- sch->stats.drops++;
-+ kfree_skb(skb);
- return 0; /* lie about loss so TCP doesn't know */
- }
-
-diff -Nur linux-2.4.29/net/unix/af_unix.c linux-mips/net/unix/af_unix.c
---- linux-2.4.29/net/unix/af_unix.c 2004-11-17 12:54:22.000000000 +0100
-+++ linux-mips/net/unix/af_unix.c 2005-03-26 11:47:39.318198721 +0100
-@@ -1686,8 +1686,13 @@
- }
-
- spin_lock(&sk->receive_queue.lock);
-- if((skb=skb_peek(&sk->receive_queue))!=NULL)
-- amount=skb->len;
-+ if (sk->type == SOCK_STREAM) {
-+ skb_queue_walk(&sk->receive_queue, skb)
-+ amount += skb->len;
-+ } else {
-+ if((skb=skb_peek(&sk->receive_queue))!=NULL)
-+ amount=skb->len;
-+ }
- spin_unlock(&sk->receive_queue.lock);
- err = put_user(amount, (int *)arg);
- break;
-diff -Nur linux-2.4.29/scripts/Configure linux-mips/scripts/Configure
---- linux-2.4.29/scripts/Configure 2003-06-13 16:51:39.000000000 +0200
-+++ linux-mips/scripts/Configure 2005-03-26 11:47:39.412183296 +0100
-@@ -378,15 +378,18 @@
- function hex () {
- old=$(eval echo "\${$2}")
- def=${old:-$3}
-- def=${def#*[x,X]}
- while :; do
- readln "$1 ($2) [$def] " "$def" "$old"
-- ans=${ans#*[x,X]}
-- if expr "$ans" : '[0-9a-fA-F][0-9a-fA-F]*$' > /dev/null; then
-+ if expr "$ans" : '0x[0-9a-fA-F][0-9a-fA-F]*$' > /dev/null; then
- define_hex "$2" "$ans"
- break
- else
-- help "$2"
-+ if expr "$ans" : '[0-9a-fA-F][0-9a-fA-F]*$' > /dev/null; then
-+ define_hex "$2" "0x$ans"
-+ break
-+ else
-+ help "$2"
-+ fi
- fi
- done
- }
projects / 15.05 / openwrt.git / commitdiff