Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.
Signed-off-by: Ron Curry <wingspinner@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42785
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hlk-rm04)
set_wifi_led "rt2800pci-phy0::radio"
;;
+ ht-tm02)
+ ucidef_set_led_netdev "eth" "ETH" "ht-tm02:white:status" "eth0"
+ set_wifi_led "ht-tm02:blue:wifi"
+ ;;
all0239-3g|\
hw550-3g)
set_usb_led "hw550-3g:green:usb"
ucidef_add_switch_vlan "switch0" "2" "4 9t"
;;
+ ht-tm02)
+ ucidef_set_interface_lan "eth0.1"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "4 6t"
+ ;;
+
3g-6200n | \
dir-610-a1 | \
dir-300-b7 | \
hlk-rm04 | \
mpr-a1 | \
mpr-a2 | \
+ ht-tm02 | \
dir-300-b7 | \
dir-320-b1 | \
psr-680w |\
hlk-rm04)
status_led="hlk-rm04:red:power"
;;
+ ht-tm02)
+ status_led="ht-tm02:white:status"
+ ;;
all0239-3g|\
hw550-3g)
status_led="hw550-3g:green:status"
*"HILINK HLK-RM04")
name="hlk-rm04"
;;
+ *"HOOTOO HT-TM02")
+ name="ht-tm02"
+ ;;
*"HAME MPR-A1")
name="mpr-a1"
;;
hw550-3g | \
hg255d | \
hlk-rm04 | \
+ ht-tm02 | \
ip2202 | \
m3 | \
m4 | \
--- /dev/null
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "HT-TM02", "ralink,rt5350-soc";
+ model = "HOOTOO HT-TM02";
+
+ palmbus@10000000 {
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x3f>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wifi {
+ label = "ht-tm02:blue:wifi";
+ gpios = <&gpio0 7 1>;
+ };
+ status {
+ label = "ht-tm02:yellow:status";
+ gpios = <&gpio0 12 1>;
+ };
+
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
endef
Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
+Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02)
+
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HLKRM04,$(1))
+ $(call Image/Build/Profile/HT-TM02,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/IP2202,$(1))
$(call Image/Build/Profile/M3,$(1))
--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+
+define Profile/HT-TM02
+ NAME:=HOOTOO HT-TM02
+ PACKAGES:=\
+ wpad-mini \
+ kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio kmod-ledtrig-default-on \
+ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net usbutils \
+ kmod-scsi-core kmod-scsi-generic kmod-fs-ext4 \
+ kmod-usb-storage kmod-usb-storage-extras block-mount \
+ kmod-usb-serial kmod-usb-serial-ftdi kmod-gpio-button-hotplug \
+ kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 luci luci-mod-admin-full \
+ kmod-app-samba luci-theme-openwrt luci-proto-relay relayd nano \
+ fstools
+endef
+
+define Profile/HT-TM02/Description
+ Package set for HOOTOO HT-TM02 board
+endef
+
+$(eval $(call Profile,HT-TM02))
+