changed Makefile and profiles, added patches for kernel 2.6.24

[openwrt.git] / target / linux / s3c24xx / patches / 0210-fix-no-uart-leak-when-gps-off.patch.patch

diff --git a/target/linux/s3c24xx/patches/0210-fix-no-uart-leak-when-gps-off.patch.patch b/target/linux/s3c24xx/patches/0210-fix-no-uart-leak-when-gps-off.patch.patch
deleted file mode 100755 (executable)
index 0fc8559..0000000
--- a/target/linux/s3c24xx/patches/0210-fix-no-uart-leak-when-gps-off.patch.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 75c6d53772b66d6d4237745a5d3185f836e05b70 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Fri, 25 Jul 2008 23:06:19 +0100
-Subject: [PATCH] fix-no-uart-leak-when-gps-off.patch
-
-During the suspend current reduction campaign on suspend I
-forced the GPS UART to be GPIO and to drive 0 into the GPS
-unit so we would not burn current there.  On resume it lets
-the pins act as UARTs again.  But really, we should do this
-all the time that the GPS unit is off, lest we leak it
-enough power to hold internal state and make trouble.
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- arch/arm/plat-s3c24xx/neo1973_pm_gps.c |   57 +++++++++++++------------------
- 1 files changed, 24 insertions(+), 33 deletions(-)
-
-diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_gps.c b/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
-index 9c6adfa..8cd583d 100644
---- a/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
-+++ b/arch/arm/plat-s3c24xx/neo1973_pm_gps.c
-@@ -272,9 +272,23 @@ static void gps_pwron_set(int on)
- 
- #ifdef CONFIG_MACH_NEO1973_GTA02
-       if (machine_is_neo1973_gta02()) {
--              if (on)
-+              if (on) {
-                       pcf50633_voltage_set(pcf50633_global,
-                               PCF50633_REGULATOR_LDO5, 3000);
-+                      /* return UART pins to being UART pins */
-+                      s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
-+                      /* remove pulldown now it won't be floating any more */
-+                      s3c2410_gpio_pullup(S3C2410_GPH5, 0);
-+              } else {
-+                      /*
-+                       * take care not to power unpowered GPS from UART TX
-+                       * return them to GPIO and force low
-+                       */
-+                      s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
-+                      s3c2410_gpio_setpin(S3C2410_GPH4, 0);
-+                      /* don't let RX from unpowered GPS float */
-+                      s3c2410_gpio_pullup(S3C2410_GPH5, 1);
-+              }
-               pcf50633_onoff_set(pcf50633_global,
-                       PCF50633_REGULATOR_LDO5, on);
-       }
-@@ -284,21 +298,14 @@ static void gps_pwron_set(int on)
- static int gps_pwron_get(void)
- {
- #ifdef CONFIG_MACH_NEO1973_GTA01
--      if (machine_is_neo1973_gta01()) {
--              if (s3c2410_gpio_getpin(GTA01_GPIO_GPS_PWRON))
--                      return 1;
--              else
--                      return 0;
--      }
-+      if (machine_is_neo1973_gta01())
-+              return !!s3c2410_gpio_getpin(GTA01_GPIO_GPS_PWRON);
- #endif /* CONFIG_MACH_NEO1973_GTA01 */
- 
- #ifdef CONFIG_MACH_NEO1973_GTA02
--      if (machine_is_neo1973_gta02()) {
--              if (pcf50633_onoff_get(pcf50633_global, PCF50633_REGULATOR_LDO5))
--                      return 1;
--              else
--                      return 0;
--      }
-+      if (machine_is_neo1973_gta02())
-+              return !!pcf50633_onoff_get(pcf50633_global,
-+                                                     PCF50633_REGULATOR_LDO5);
- #endif /* CONFIG_MACH_NEO1973_GTA02 */
-       return -1;
- }
-@@ -496,15 +503,8 @@ static int gta01_pm_gps_suspend(struct platform_device *pdev,
- #endif /* CONFIG_MACH_NEO1973_GTA01 */
- 
- #ifdef CONFIG_MACH_NEO1973_GTA02
--      if (machine_is_neo1973_gta02()) {
--              /* take care not to power unpowered GPS from GPIO */
--              s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
--              s3c2410_gpio_setpin(S3C2410_GPH4, 0);
--              /* don't let RX from unpowered GPS float */
--              s3c2410_gpio_pullup(S3C2410_GPH5, 1);
--
-+      if (machine_is_neo1973_gta02())
-               gps_pwron_set(0);
--      }
- #endif /* CONFIG_MACH_NEO1973_GTA02 */
- 
-       return 0;
-@@ -513,26 +513,17 @@ static int gta01_pm_gps_suspend(struct platform_device *pdev,
- static int gta01_pm_gps_resume(struct platform_device *pdev)
- {
- #ifdef CONFIG_MACH_NEO1973_GTA01
--      if (machine_is_neo1973_gta01()) {
-+      if (machine_is_neo1973_gta01())
-               if (neo1973_gps.power_was_on)
-                       gps_power_sequence_up();
--      }
- #endif /* CONFIG_MACH_NEO1973_GTA01 */
- 
- #ifdef CONFIG_MACH_NEO1973_GTA02
--      if (machine_is_neo1973_gta02()) {
--              /*
--               * resume TXD1 function since we power GPS now... er..
--               * WTF?  FIXME We always power GPS on resume ??
--               */
--              s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
--              /* remove pulldown now it won't be floating any more */
--              s3c2410_gpio_pullup(S3C2410_GPH5, 0);
--
-+      if (machine_is_neo1973_gta02())
-               if (neo1973_gps.power_was_on)
-                   gps_pwron_set(1);
- #endif /* CONFIG_MACH_NEO1973_GTA02 */
--      }
-+
-       return 0;
- }
- #else
--- 
-1.5.6.3
-