ramips: convert the remaining subtargets to 4.4
[openwrt.git] / target / linux / ramips / patches-4.3 / 0506-net-next-mediatek-add-support-for-rt3050.patch
diff --git a/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch b/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch
deleted file mode 100644 (file)
index a80c940..0000000
+++ /dev/null
@@ -1,239 +0,0 @@
-From a3555658ce5dd97df3dc225289b92800da9d38ba Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:28:51 +0100
-Subject: [PATCH 506/513] net-next: mediatek: add support for rt3050
-
-Add support for SoCs from the rt3050 family. This include rt3050, rt3052,
-rt3352 and rt5350. These all have a builtin 5 port 100mbit switch. This patch
-includes rudimentary code to power up the switch. There are a lot of magic
-values that get written to the switch and the internal phys. These values
-come straight from the SDK driver and we do not know the meaning of most of
-them.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/esw_rt3050.c |   18 +---
- drivers/net/ethernet/mediatek/soc_rt3050.c |  158 ++++++++++++++++++++++++++++
- 2 files changed, 159 insertions(+), 17 deletions(-)
- create mode 100644 drivers/net/ethernet/mediatek/soc_rt3050.c
-
---- a/drivers/net/ethernet/mediatek/esw_rt3050.c
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
-@@ -14,27 +14,11 @@
- #include <linux/module.h>
- #include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/dma-mapping.h>
--#include <linux/init.h>
--#include <linux/skbuff.h>
--#include <linux/etherdevice.h>
--#include <linux/ethtool.h>
- #include <linux/platform_device.h>
--#include <linux/of_device.h>
--#include <linux/clk.h>
--#include <linux/of_net.h>
--#include <linux/of_mdio.h>
--
- #include <asm/mach-ralink/ralink_regs.h>
- #include "mtk_eth_soc.h"
--#include <linux/ioport.h>
--#include <linux/mii.h>
--
--#include <ralink_regs.h>
--
- /* HW limitations for this switch:
-  * - No large frame support (PKT_MAX_LEN at most 1536)
-  * - Can't have untagged vlan and tagged vlan on one port at the same time,
-@@ -559,7 +543,7 @@ static irqreturn_t esw_interrupt(int irq
- static int esw_probe(struct platform_device *pdev)
- {
--      struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
-+      struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       struct device_node *np = pdev->dev.of_node;
-       const __be32 *port_map, *reg_init;
-       struct rt305x_esw *esw;
-@@ -629,12 +613,9 @@ static struct platform_driver esw_driver
-       },
- };
--int __init mtk_switch_init(void)
--{
--      return platform_driver_register(&esw_driver);
--}
-+module_platform_driver(esw_driver);
--void mtk_switch_exit(void)
--{
--      platform_driver_unregister(&esw_driver);
--}
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Switch driver for RT305X SoC");
-+MODULE_VERSION(MTK_FE_DRV_VERSION);
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/soc_rt3050.c
-@@ -0,0 +1,158 @@
-+/*   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; version 2 of the License
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ *   Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio_rt2880.h"
-+
-+#define RT305X_RESET_FE         BIT(21)
-+#define RT305X_RESET_ESW        BIT(23)
-+
-+static const u16 rt5350_reg_table[FE_REG_COUNT] = {
-+      [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+      [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+      [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+      [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+      [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+      [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+      [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
-+      [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+      [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+      [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+      [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
-+      [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+      [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+      [FE_REG_FE_RST_GL] = 0,
-+      [FE_REG_FE_DMA_VID_BASE] = 0,
-+};
-+
-+static void rt305x_init_data(struct fe_soc_data *data,
-+                           struct net_device *netdev)
-+{
-+      struct fe_priv *priv = netdev_priv(netdev);
-+
-+      priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
-+              FE_FLAG_CALIBRATE_CLK | FE_FLAG_HAS_SWITCH;
-+      netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
-+              NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
-+}
-+
-+static int rt3050_fwd_config(struct fe_priv *priv)
-+{
-+      int ret;
-+
-+      if (ralink_soc != RT305X_SOC_RT3052) {
-+              ret = fe_set_clock_cycle(priv);
-+              if (ret)
-+                      return ret;
-+      }
-+
-+      fe_fwd_config(priv);
-+      if (ralink_soc != RT305X_SOC_RT3352)
-+              fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
-+      fe_csum_config(priv);
-+
-+      return 0;
-+}
-+
-+static void rt305x_fe_reset(void)
-+{
-+      fe_reset(RT305X_RESET_FE);
-+}
-+
-+static void rt5350_init_data(struct fe_soc_data *data,
-+                           struct net_device *netdev)
-+{
-+      struct fe_priv *priv = netdev_priv(netdev);
-+
-+      priv->flags = FE_FLAG_HAS_SWITCH;
-+      netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
-+}
-+
-+static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
-+{
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&priv->page_lock, flags);
-+      fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
-+      fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+             RT5350_SDM_MAC_ADRL);
-+      spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static void rt5350_rxcsum_config(bool enable)
-+{
-+      if (enable)
-+              fe_w32(fe_r32(RT5350_SDM_CFG) | (RT5350_SDM_ICS_EN |
-+                              RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
-+                              RT5350_SDM_CFG);
-+      else
-+              fe_w32(fe_r32(RT5350_SDM_CFG) & ~(RT5350_SDM_ICS_EN |
-+                              RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
-+                              RT5350_SDM_CFG);
-+}
-+
-+static int rt5350_fwd_config(struct fe_priv *priv)
-+{
-+      struct net_device *dev = priv_netdev(priv);
-+
-+      rt5350_rxcsum_config((dev->features & NETIF_F_RXCSUM));
-+
-+      return 0;
-+}
-+
-+static void rt5350_tx_dma(struct fe_tx_dma *txd)
-+{
-+      txd->txd4 = 0;
-+}
-+
-+static void rt5350_fe_reset(void)
-+{
-+      fe_reset(RT305X_RESET_FE | RT305X_RESET_ESW);
-+}
-+
-+static struct fe_soc_data rt3050_data = {
-+      .init_data = rt305x_init_data,
-+      .reset_fe = rt305x_fe_reset,
-+      .fwd_config = rt3050_fwd_config,
-+      .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-+      .checksum_bit = RX_DMA_L4VALID,
-+      .rx_int = FE_RX_DONE_INT,
-+      .tx_int = FE_TX_DONE_INT,
-+      .status_int = FE_CNT_GDM_AF,
-+};
-+
-+static struct fe_soc_data rt5350_data = {
-+      .init_data = rt5350_init_data,
-+      .reg_table = rt5350_reg_table,
-+      .reset_fe = rt5350_fe_reset,
-+      .set_mac = rt5350_set_mac,
-+      .fwd_config = rt5350_fwd_config,
-+      .tx_dma = rt5350_tx_dma,
-+      .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-+      .checksum_bit = RX_DMA_L4VALID,
-+      .rx_int = RT5350_RX_DONE_INT,
-+      .tx_int = RT5350_TX_DONE_INT,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+      { .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
-+      { .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
-+      {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);