ramips: use lowercase partiion names on the WCR150GN board

[openwrt.git] / target / linux / ramips / image / Makefile

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index acd3283..98dbdfb 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -18,13 +18,13 @@ ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
        UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
 endif
 
-ifeq ($(CONFIG_RALINK_RT305X),y)
+ifeq ($(CONFIG_RALINK_RT288X),y)
 define kernel_entry
--a 0x80000000 -e 0x80000000
+-a 0x88000000 -e 0x88000000
 endef
 else
 define kernel_entry
--a 0x88000000 -e 0x88000000
+-a 0x80000000 -e 0x80000000
 endef
 endif
 
@@ -80,8 +80,15 @@ define Image/Build/Template/GENERIC_8M
        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960)
 endef
 
+mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtd_dir300b1_kernel_part_size=851968
+mtd_dir300b1_rootfs_part_size=3014656
+define Image/Build/Template/DIR300B1
+       $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
+endef
+
 define Image/Build/Profile/DIR300B1
-       $(call Image/Build/Template/GENERIC_4M,$(1),dir-300-b1,DIR-300-revB)
+       $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-revB)
 endef
 
 define Image/Build/Profile/FONERA20N
@@ -100,8 +107,15 @@ define Image/Build/Profile/WHRG300N
        $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
 endef
 
+define Image/Build/Profile/HW5503G
+       $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
+endef
 
-mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(Bootloader)ro,64k(Config),64k(Factory),832k(Kernel),2944k(rootfs),3776k@0x50000(firmware)
+define Image/Build/Profile/MOFI35003GN
+       $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
+endef
+
+mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
 mtd_wcr150gn_kernel_part_size=851968
 mtd_wcr150gn_rootfs_part_size=3014656
 define Image/Build/Template/WCR150GN
@@ -113,6 +127,18 @@ define Image/Build/Profile/WCR150GN
 endef
 
 
+mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
+mtd_f5d8235_kernel_part_size=1572864
+mtd_f5d8235_rootfs_part_size=6356992
+define Image/Build/Template/F5D8235V2
+       $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
+define Image/Build/Profile/F5D8235V2
+       $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
+endef
+
+
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/DIR300B1,$(1))
@@ -121,6 +147,9 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/PWH2004,$(1))
        $(call Image/Build/Profile/WHRG300N,$(1))
        $(call Image/Build/Profile/WCR150GN,$(1))
+       $(call Image/Build/Profile/F5D8235V2,$(1))
+       $(call Image/Build/Profile/HW5503G,$(1))
+       $(call Image/Build/Profile/MOFI35003GN,$(1))
 endef
 endif