#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#define ALL0256N_KEYS_POLL_INTERVAL 20
#define ALL0256N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0256N_KEYS_POLL_INTERVAL)
-static struct mtd_partition all0256n_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x030000,
- .size = 0x010000,
- }, {
- .name = "factory",
- .offset = 0x040000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x050000,
- .size = 0x0D0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2E0000,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x3B0000,
- }
-};
-
const struct flash_platform_data all0256n_flash = {
.type = "mx25l3205d",
- .parts = all0256n_partitions,
- .nr_parts = ARRAY_SIZE(all0256n_partitions),
};
struct spi_board_info all0256n_spi_slave_info[] __initdata = {
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_spi(all0256n_spi_slave_info,
ARRAY_SIZE(all0256n_spi_slave_info));
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio),
all0256n_leds_gpio);