ramips: add missing kernel symbols

[openwrt.git] / target / linux / ramips / dts / W306R_V20.dts

diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts
index f5b3414..72b6ed8 100644 (file)
--- a/target/linux/ramips/dts/W306R_V20.dts
+++ b/target/linux/ramips/dts/W306R_V20.dts
@@ -9,7 +9,6 @@
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -39,33 +38,35 @@
                };
        };
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x28>;
        };
 
        esw@10110000 {
-               status = "okay";
                ralink,portmap = <0x3e>;
        };
 
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
        gpio-leds {
                compatible = "gpio-leds";
+
                sys {
                        label = "w306r-v20:green:sys";
                        gpios = <&gpio0 9 1>;
                };
+
                wps {
                        label = "w306r-v20:green:wps";
                        gpios = <&gpio0 13 1>;
@@ -77,14 +78,11 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "RESET/WPS";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
        };
-
-       wmac@10180000 {
-               status = "okay";
-       };
 };