[ramips]: add support for the Linksys E1700

[15.05/openwrt.git] / target / linux / ramips / dts / E1700.dts

diff --git a/target/linux/ramips/dts/E1700.dts b/target/linux/ramips/dts/E1700.dts
new file mode 100644 (file)
index 0000000..8fdb611
--- /dev/null
+++ b/target/linux/ramips/dts/E1700.dts
@@ -0,0 +1,148 @@
+/*
+ * Device Tree file for the Linksys E1700
+ *
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "linksys,e1700", "ralink,mt7620a-soc";
+       model = "Linksys E1700";
+
+       palmbus@10000000 {
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l6405d";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "config";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x7b0000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+
+               mtd-mac-address = <&factory 0x28>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+               ralink,port-map = "llllw";
+
+               port@5 {
+                       status = "okay";
+                       ralink,fixed-link = <1000 1 1 1>;
+                       phy-mode = "rgmii";
+               };
+
+               mdio-bus {
+                       status = "okay";
+
+                       phy0: ethernet-phy@0 {
+                               reg = <0>;
+                               phy-mode = "rgmii";
+                       };
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                               phy-mode = "rgmii";
+                       };
+                       phy2: ethernet-phy@2 {
+                               reg = <2>;
+                               phy-mode = "rgmii";
+                       };
+                       phy3: ethernet-phy@3 {
+                               reg = <3>;
+                               phy-mode = "rgmii";
+                       };
+                       phy4: ethernet-phy@4 {
+                               reg = <4>;
+                               phy-mode = "rgmii";
+                       };
+                       phy1f: ethernet-phy@1f {
+                               reg = <0x1f>;
+                               phy-mode = "rgmii";
+                       };
+               };
+       };
+
+       gsw@10110000 {
+               ralink,port4 = "gmac";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 0>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 0>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "linksys:green:power";
+                       gpios = <&gpio0 10 1>;
+               };
+               wan {
+                       label = "linksys:green:wps";
+                       gpios = <&gpio0 12 1>;
+               };
+       };
+};