/include/ "rt3883.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "DIR-645", "ralink,rt3883-soc";
model = "D-Link DIR-645";
- memorydetect {
- ralink,memory = <0x0 0x200000 0x10000000>;
- };
-
palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "uartlite", "spi";
- ralink,gpiomux = "i2c", "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- timer@100 {
- status = "okay";
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
gpio1: gpio@638 {
status = "okay";
};
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <25000000>;
+
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x4000>;
read-only;
};
+
factory: partition@34000 {
label = "factory";
reg = <0x34000 0x4000>;
read-only;
};
+
partition@38000 {
label = "nvram";
reg = <0x38000 0x8000>;
read-only;
};
+
partition@40000 {
label = "devdata";
reg = <0x40000 0x10000>;
};
+
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
ethernet@10100000 {
- status = "okay";
+ mtd-mac-address = <&factory 0x4>;
- mtd-mac-address = <&factory 0x28>;
- ralink,fixed-link = <1000 1 1 1>;
+ port@0 {
+ ralink,fixed-link = <1000 1 1 0>;
+ };
};
wmac@10180000 {
- status = "okay";
ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
status = "okay";
};
- rtl8366b {
- compatible = "rtl8367b";
+ rtl8367b {
+ compatible = "realtek,rtl8367b";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 9 0>;
linux,code = <0x198>;
};
+
wps {
label = "wps";
gpios = <&gpio0 14 0>;
gpio-leds {
compatible = "gpio-leds";
-
+
inet {
- label = "d-link:green:inet";
+ label = "dir-645:green:inet";
gpios = <&gpio0 0 1>;
};
+
wps {
- label = "d-link:green:wps";
+ label = "dir-645:green:wps";
gpios = <&gpio1 2 0>;
};
};