lantiq: move dts files to thir own folder
[openwrt.git] / target / linux / lantiq / dts / ARV752DPW.dts
diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts
new file mode 100644 (file)
index 0000000..7254f5c
--- /dev/null
@@ -0,0 +1,219 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+       model = "ARV752DPW - Arcor 802";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       sram@1F000000 {
+               vmmc@107000 {
+                       status = "okay";
+                       gpios = <&gpiomm 1 0>;
+               };
+       };
+
+       fpi@10000000 {
+               localbus@0 {
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x00000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@10000 {
+                                       label = "uboot_env";
+                                       reg = <0x10000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@20000 {
+                                       label = "linux";
+                                       reg = <0x20000 0x7d0000>;
+                               };
+
+                               partition@7f0000 {
+                                       label = "board_config";
+                                       reg = <0x7f0000 0x10000>;
+                                       read-only;
+                               };
+                       };
+
+                       mac_addr {
+                               compatible = "lantiq,eth-mac";
+                               reg = <0 0x7f0016 0x6>;
+                               mac-increment = <2>;
+                       };
+
+                       gpiomm: gpiomm@4000000 {
+                               compatible = "lantiq,gpio-mm";
+                               reg = <1 0x0 0x10 >;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               lantiq,shadow = <0x3>;
+                       };
+               };
+
+               gpio: pinmux@E100B10 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               ebu {
+                                       lantiq,groups = "ebu cs1";
+                                       lantiq,function = "ebu";
+                               };
+                               exin {
+                                       lantiq,groups = "exin1";
+                                       lantiq,function = "exin";
+                                       lantiq,pull = <2>;
+                                       lantiq,output = <0>;
+                               };
+                               pci_in {
+                                       lantiq,groups = "req2", "req1";
+                                       lantiq,function = "pci";
+                                       lantiq,open-drain = <1>;
+                                       lantiq,pull = <2>;
+                                       lantiq,output = <0>;
+                               };
+                               pci_out {
+                                       lantiq,groups = "gnt1";
+                                       lantiq,function = "pci";
+                                       lantiq,output = <1>;
+                               };
+                               pci_rst {
+                                       lantiq,pins = "io21";
+                                       lantiq,pull = <2>;
+                                       lantiq,output = <1>;
+                               };
+                               leds {
+                                       lantiq,pins = "io3", "io5", "io6", "io8";
+                                       lantiq,output = <1>;
+                                       lantiq,pull = <0>;
+                               };
+                               keys {
+                                       lantiq,pins = "io11", "io12", "io13", "io28";
+                                       lantiq,output = <0>;
+                                       lantiq,pull = <2>;
+                                       lantiq,open-drain = <1>;
+                               };
+                       };
+               };
+
+               ifxhcd@E101000 {
+                       status = "okay";
+                       gpios = <&gpiomm 0 0>;
+               };
+
+               etop@E180000 {
+                       phy-mode = "rmii";
+               };
+
+               pci@E105400 {
+                       status = "okay";
+                       lantiq,external-clock;
+                       gpio-reset = <&gpio 21 0>;
+                       interrupt-map = <0x7000 0 0 1 &icu0 135>;
+                       req-mask = <0x3>;
+               };
+
+       };
+
+       ralink_eep {
+               compatible = "ralink,eeprom";
+               ralink,eeprom = "RT2860.eeprom";
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               
+       /*      wps {
+                       label = "wps";
+                       gpios = <&gpio 11 1>;
+                       linux,code = <0x211>;
+               };*/
+               restart {
+                       label = "restart";
+                       gpios = <&gpio 12 0>;
+                       linux,code = <0x110>;
+               };
+               dsl {
+                       label = "dsl";
+                       gpios = <&gpio 13 0>;
+                       linux,code = <0x111>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 28 0>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "power";
+                       gpios = <&gpio 3 1>;
+               };
+               message {
+                       label = "message";
+                       gpios = <&gpio 5 1>;
+               };
+               power1 {
+                       label = "power1";
+                       gpios = <&gpio 6 1>;
+               };
+               voice1 {
+                       label = "voice1";
+                       gpios = <&gpio 8 1>;
+               };
+               microphone {
+                       /* use this led as te usb led */
+                       label = "usb";
+                       gpios = <&gpiomm 3 1>;
+               };
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpiomm 4 1>;
+               };
+               fxs1 {
+                       label = "fxs1";
+                       gpios = <&gpiomm 5 1>;
+               };
+               fx2 {
+                       label = "fxs2";
+                       gpios = <&gpiomm 6 1>;
+               };
+               fxo {
+                       label = "fxo";
+                       gpios = <&gpiomm 7 1>;
+               };
+               internet {
+                       label = "internet";
+                       gpios = <&gpiomm 8 1>;
+               };
+               voice2 {
+                       label = "voice2";
+                       gpios = <&gpiomm 9 1>;
+               };
+       };
+};