ipq806x: update target to v3.18

[openwrt.git] / target / linux / ipq806x / patches / 0061-i2c-qup-Add-device-tree-bindings-information.patch

diff --git a/target/linux/ipq806x/patches/0061-i2c-qup-Add-device-tree-bindings-information.patch b/target/linux/ipq806x/patches/0061-i2c-qup-Add-device-tree-bindings-information.patch
deleted file mode 100644 (file)
index 2f9ee58..0000000
--- a/target/linux/ipq806x/patches/0061-i2c-qup-Add-device-tree-bindings-information.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 81480a89c72d811376e9e040729721705b2a984d Mon Sep 17 00:00:00 2001
-From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
-Date: Thu, 13 Mar 2014 19:07:42 -0700
-Subject: [PATCH 061/182] i2c: qup: Add device tree bindings information
-
-The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
-provide input and output FIFO's for it. I2C controller can operate
-as master with supported bus speeds of 100Kbps and 400Kbps.
-
-Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
-[bjorn: reformulated part of binding description
-        added version to compatible
-        cleaned up example]
-Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
-Acked-by: Rob Herring <robh@kernel.org>
-[wsa: removed the dummy child node which was a confusing example]
-Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
----
- .../devicetree/bindings/i2c/qcom,i2c-qup.txt       |   40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-@@ -0,0 +1,40 @@
-+Qualcomm Universal Peripheral (QUP) I2C controller
-+
-+Required properties:
-+ - compatible: Should be:
-+   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
-+   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
-+   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
-+ - reg: Should contain QUP register address and length.
-+ - interrupts: Should contain I2C interrupt.
-+
-+ - clocks: A list of phandles + clock-specifiers, one for each entry in
-+   clock-names.
-+ - clock-names: Should contain:
-+   * "core" for the core clock
-+   * "iface" for the AHB clock
-+
-+ - #address-cells: Should be <1> Address cells for i2c device address
-+ - #size-cells: Should be <0> as i2c addresses have no size component
-+
-+Optional properties:
-+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
-+                    defaults to 100kHz if omitted.
-+
-+Child nodes should conform to i2c bus binding.
-+
-+Example:
-+
-+ i2c@f9924000 {
-+      compatible = "qcom,i2c-qup-v2.2.1";
-+      reg = <0xf9924000 0x1000>;
-+      interrupts = <0 96 0>;
-+
-+      clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-+      clock-names = "core", "iface";
-+
-+      clock-frequency = <355000>;
-+
-+      #address-cells = <1>;
-+      #size-cells = <0>;
-+ };