p->uartclk = bcma_port->baud_base;
p->regshift = bcma_port->reg_shift;
p->iotype = UPIO_MEM;
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
+
+ config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struc
+@@ -22,6 +22,8 @@
+ struct bcma_bus;
+
+ /* main.c */
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -31,6 +33,8 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -45,6 +47,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
+@@ -45,6 +49,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
/* driver_chipcommon.c */
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
/* driver_chipcommon_pmu.c */
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic
if (i)
bcma_err(core->bus, "PLL enable timeout\n");
} else {
static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
{
-@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+@@ -139,8 +140,15 @@ void bcma_core_chipcommon_init(struct bc
+ bcma_core_chipcommon_early_init(cc);
+
+ if (cc->core->id.rev >= 20) {
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -213,6 +221,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
return res;
}
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
-@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -225,6 +234,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
return res;
}
/*
* If the bit is set to 0, chipcommon controlls this GPIO,
-@@ -329,7 +332,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -329,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
return;
}
.num_resources = 0,
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
++ break;
++ }
++}
++
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(stru
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
++ break;
+ default:
+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+ bus->chipinfo.id);
+@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
++ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
+@@ -174,19 +297,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
default:
bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -264,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+@@ -264,7 +403,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
}
/* query bus clock frequency for PMU-enabled chipcommon */
{
struct bcma_bus *bus = cc->core->bus;
-@@ -293,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+@@ -293,6 +432,7 @@ static u32 bcma_pmu_get_bus_clock(struct
}
return BCMA_CC_PMU_HT_CLOCK;
}
/* query cpu clock frequency for PMU-enabled chipcommon */
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
-@@ -372,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -372,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
break;
case BCMA_CHIP_ID_BCM4331:
-@@ -393,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -393,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
0x03000a08);
}
break;
case BCMA_CHIP_ID_BCM43224:
-@@ -426,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -426,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM4716:
-@@ -460,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -460,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM43227:
-@@ -496,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -496,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
.start = BCMA_SOC_FLASH2,
+@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
+ u16 numblocks;
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
+- struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -73,6 +73,16 @@ static void bcma_gpio_free(struct gpio_c
+ return bcma_core_irq(pc_host->pdev->core);
}
EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -81,8 +81,8 @@ struct bcma_device *bcma_find_core(struc
{
struct bcma_device *core;
-@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+@@ -93,6 +93,25 @@ static struct bcma_device *bcma_find_cor
+ return NULL;
+ }
+
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ static void bcma_release_core_dev(struct device *dev)
+ {
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+@@ -120,6 +139,11 @@ static int bcma_register_cores(struct bc
continue;
}
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
-@@ -149,6 +154,14 @@ static int bcma_register_cores(struct bc
+@@ -149,6 +173,14 @@ static int bcma_register_cores(struct bc
dev_id++;
}
err = platform_device_register(&bcma_sflash_dev);
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+@@ -84,6 +84,8 @@ static const struct bcma_device_id_name
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
+ { BCMA_CORE_DEFAULT, "Default" },
+ };
+
+@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct
addr);
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
-@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
return ent;
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
bcma_erom_push_ent(eromptr);
-@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
}
{
u32 ent;
while (1) {
-@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str
bcma_erom_push_ent(eromptr);
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
-@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
return ent;
}
u32 addrl, addrh, sizel, sizeh = 0;
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
-@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+@@ -72,12 +72,12 @@ fail:
+ * R/W ops.
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
+
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+-
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
SSB_SPROM4_TXPID2G0_SHIFT);
+@@ -501,7 +503,7 @@ static bool bcma_sprom_onchip_available(
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+-
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+@@ -549,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset = BCMA_CC_SPROM;
+ u16 *sprom;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
+
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+@@ -578,32 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ }
+ }
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+-
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
+- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
++
++ kfree(sprom);
++ }
+
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+- err = bcma_sprom_valid(sprom);
+ if (err) {
+- bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
+
+- bcma_sprom_extract_r8(bus, sprom);
+-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
+@@ -134,12 +134,17 @@ struct bcma_host_ops {
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
-@@ -173,6 +174,60 @@ struct bcma_host_ops {
+
+ /* Chip IDs of PCIe devices */
+ #define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+ #define BCMA_CHIP_ID_BCM43224 43224
+ #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+ #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+@@ -173,6 +178,60 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM53572 53572
#define BCMA_PKG_ID_BCM47188 9
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -528,6 +532,7 @@ struct bcma_sflash {
+@@ -326,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -351,6 +357,11 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
+ #define BCMA_CC_PLLCTL_ADDR 0x0660
+ #define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
+ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
+ /* NAND flash MLC controller registers (corerev >= 38) */
+ #define BCMA_CC_NAND_REVISION 0x0C00
+@@ -431,6 +442,23 @@
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
++
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+ /* HT clock for systems with PMU-enabled chipcommon */
+@@ -503,6 +531,37 @@
+ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+ #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
+
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -528,6 +587,7 @@ struct bcma_sflash {
u32 size;
struct mtd_info *mtd;
};
#endif
-@@ -606,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -606,6 +666,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
-@@ -634,4 +641,6 @@ extern void bcma_chipco_regctl_maskset(s
+@@ -634,4 +696,6 @@ extern void bcma_chipco_regctl_maskset(s
u32 offset, u32 mask, u32 set);
extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
projects / openwrt.git / blobdiff