---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -43,8 +43,8 @@ static void early_nvram_init(void)
- #ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- mcore_ssb = &bcm47xx_bus.ssb.mipscore;
-- base = mcore_ssb->flash_window;
-- lim = mcore_ssb->flash_window_size;
-+ base = mcore_ssb->pflash.window;
-+ lim = mcore_ssb->pflash.window_size;
- break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ b/arch/mips/bcm47xx/wgt634u.c
-@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
- SSB_CHIPCO_IRQ_GPIO);
- }
-
-- wgt634u_flash_data.width = mcore->flash_buswidth;
-- wgt634u_flash_resource.start = mcore->flash_window;
-- wgt634u_flash_resource.end = mcore->flash_window
-- + mcore->flash_window_size
-+ wgt634u_flash_data.width = mcore->pflash.buswidth;
-+ wgt634u_flash_resource.start = mcore->pflash.window;
-+ wgt634u_flash_resource.end = mcore->pflash.window
-+ + mcore->pflash.window_size
- - 1;
- return platform_add_devices(wgt634u_devices,
- ARRAY_SIZE(wgt634u_devices));
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -29,7 +29,7 @@ config BCMA_HOST_PCI
help
PCI core hostmode operation (external PCI bus).
-@@ -46,6 +46,25 @@ config BCMA_DRIVER_MIPS
+@@ -46,6 +46,33 @@ config BCMA_DRIVER_MIPS
If unsure, say N
+
+ If unsure, say N
+
++config BCMA_DRIVER_GPIO
++ bool "BCMA GPIO driver"
++ depends on BCMA && GPIOLIB
++ help
++ Driver to provide access to the GPIO pins of the bcma bus.
++
++ If unsure, say N
++
config BCMA_DEBUG
bool "BCMA debugging"
depends on BCMA
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
-@@ -1,8 +1,11 @@
+@@ -1,8 +1,12 @@
bcma-y += main.o scan.o core.o sprom.o
bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
struct bcma_device *core_cc,
-@@ -39,8 +48,32 @@ void bcma_chipco_serial_init(struct bcma
+@@ -22,6 +31,8 @@ int __init bcma_bus_early_register(struc
+ int bcma_bus_suspend(struct bcma_bus *bus);
+ int bcma_bus_resume(struct bcma_bus *bus);
+ #endif
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit);
+
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
+@@ -39,8 +50,32 @@ void bcma_chipco_serial_init(struct bcma
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
#ifdef CONFIG_BCMA_HOST_PCI
/* host_pci.c */
-@@ -48,8 +81,14 @@ extern int __init bcma_host_pci_init(voi
+@@ -48,8 +83,24 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++/* driver_gpio.c */
++int bcma_gpio_init(struct bcma_drv_cc *cc);
++#else
++static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ return -ENOTSUPP;
++}
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
#endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,12 +25,93 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
return value;
}
-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
{
- u32 leddc_on = 10;
- u32 leddc_off = 90;
- if (cc->setup_done)
+ return 20000000;
+}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+
+static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+{
+ if (cc->early_setup_done)
return;
++ spin_lock_init(&cc->gpio_lock);
++
if (cc->core->id.rev >= 11)
-@@ -36,6 +120,22 @@ void bcma_core_chipcommon_init(struct bc
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
if (cc->core->id.rev >= 35)
cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
if (cc->core->id.rev >= 20) {
bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -44,7 +144,7 @@ void bcma_core_chipcommon_init(struct bc
+@@ -44,7 +147,7 @@ void bcma_core_chipcommon_init(struct bc
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
if (cc->core->id.rev >= 16) {
if (cc->core->bus->sprom.leddc_on_time &&
-@@ -56,15 +156,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
}
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -118,8 +236,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+
++/*
++ * If the bit is set to 0, chipcommon controlls this GPIO,
++ * if the bit is set to 1, it is used by some part of the chip and not our code.
++ */
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
struct bcma_serial_port *ports = cc->serial_ports;
if (ccrev >= 11 && ccrev != 15) {
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
-@@ -137,8 +254,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -137,8 +328,7 @@ void bcma_chipco_serial_init(struct bcma
| BCMA_CC_CORECTL_UARTCLKEN);
}
} else {
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -54,38 +55,19 @@ void bcma_chipco_regctl_maskset(struct b
+@@ -12,12 +13,13 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
+-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
+
+ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+ {
+@@ -54,38 +56,19 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
}
/* Set the resource masks. */
-@@ -93,22 +75,12 @@ static void bcma_pmu_resources_init(stru
+@@ -93,22 +76,12 @@ static void bcma_pmu_resources_init(stru
bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
if (max_msk)
bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
}
/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
-@@ -122,51 +94,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -122,51 +95,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
val |= BCMA_CHIPCTL_4331_EXTPA_EN;
if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -174,37 +164,31 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -174,37 +165,47 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
- case 0x5357:
- case 0x4749:
- case 53572:
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43421:
++ case BCMA_CHIP_ID_BCM43428:
++ case BCMA_CHIP_ID_BCM43431:
+ case BCMA_CHIP_ID_BCM4716:
-+ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM47162:
-+ case BCMA_CHIP_ID_BCM4313:
-+ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM6362:
/* always 20Mhz */
return 20000 * 1000;
- case 0x5356:
- case 0x5300:
-+ case BCMA_CHIP_ID_BCM5356:
+ case BCMA_CHIP_ID_BCM4706:
++ case BCMA_CHIP_ID_BCM5356:
/* always 25Mhz */
return 25000 * 1000;
++ case BCMA_CHIP_ID_BCM43460:
++ case BCMA_CHIP_ID_BCM4352:
++ case BCMA_CHIP_ID_BCM4360:
++ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++ return 40000 * 1000;
++ else
++ return 20000 * 1000;
default:
- pr_warn("No ALP clock specified for %04X device, "
- "pmu rev. %d, using default %d Hz\n",
}
return BCMA_CC_PMU_ALP_CLOCK;
}
-@@ -212,7 +196,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -212,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
/* Find the output of the "m" pll divider given pll controls that start with
* pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
*/
{
u32 tmp, div, ndiv, p1, p2, fc;
struct bcma_bus *bus = cc->core->bus;
-@@ -221,7 +205,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -221,7 +222,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
BUG_ON(!m || m > 4);
/* Detect failure in clock setting */
tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
if (tmp & 0x40000)
-@@ -240,60 +225,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +242,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
/* Do calculation in Mhz */
pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
break;
default:
-@@ -301,10 +321,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +338,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4331:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 0x03000a08);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM43224:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4716:
+ 0x88888815);
+ }
+
-+ tmp = 3 << 9;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ break;
+
+ case BCMA_CHIP_ID_BCM43227:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { "M25P16", 0x14, 0x10000, 32, },
-+ { "M25P32", 0x14, 0x10000, 64, },
++ { "M25P32", 0x15, 0x10000, 64, },
+ { "M25P64", 0x16, 0x10000, 128, },
+ { "M25FL128", 0x17, 0x10000, 256, },
+ { 0 },
+{
+ mutex_init(&gc->phy_mutex);
+}
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,98 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
++{
++ return container_of(chip, struct bcma_drv_cc, gpio);
++}
++
++static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ return !!bcma_chipco_gpio_in(cc, 1 << gpio);
++}
++
++static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
++ return 0;
++}
++
++static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++}
++
++static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_control(cc, 1 << gpio, 0);
++ /* clear pulldown */
++ bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
++ /* Set pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
++
++ return 0;
++}
++
++static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ /* clear pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
++}
++
++int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ struct gpio_chip *chip = &cc->gpio;
++
++ chip->label = "bcma_gpio";
++ chip->owner = THIS_MODULE;
++ chip->request = bcma_gpio_request;
++ chip->free = bcma_gpio_free;
++ chip->get = bcma_gpio_get_value;
++ chip->set = bcma_gpio_set_value;
++ chip->direction_input = bcma_gpio_direction_input;
++ chip->direction_output = bcma_gpio_direction_output;
++ chip->ngpio = 16;
++ /* There is just one SoC in one device and its GPIO addresses should be
++ * deterministic to address them more easily. The other buses could get
++ * a random base number. */
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ chip->base = 0;
++ else
++ chip->base = -1;
++
++ return gpiochip_add(chip);
++}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -22,15 +22,15 @@
dev->bus->chipinfo.pkg == 11 &&
dev->id.id == BCMA_CORE_USB20_HOST;
}
-@@ -115,7 +115,7 @@ static void bcma_core_mips_set_irq(struc
+@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+ return dev->core_index;
+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+- return flag & 0x1F;
++ if (flag)
++ return flag & 0x1F;
++ else
++ return 0x3f;
+ }
+
+ /* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ * If not supported, 6 is returned.
+ */
+ unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ unsigned int irq;
+
+ irqflag = bcma_core_mips_irqflag(dev);
++ if (irqflag == 0x3f)
++ return 6;
+
+- for (irq = 1; irq <= 4; irq++)
++ for (irq = 0; irq <= 4; irq++)
+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+ (1 << irqflag))
+ return irq;
+
+- return 0;
++ return 5;
+ }
+ EXPORT_SYMBOL(bcma_core_mips_irq);
+
+@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
~(1 << irqflag));
- else
+- else
- bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++ else if (oldirq != 5)
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
/* assign the new one */
if (irq == 0) {
-@@ -131,7 +131,7 @@ static void bcma_core_mips_set_irq(struc
+@@ -123,17 +130,17 @@ static void bcma_core_mips_set_irq(struc
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+ (1 << irqflag));
+ } else {
+- u32 oldirqflag = bcma_read32(mdev,
+- BCMA_MIPS_MIPS74K_INTMASK(irq));
+- if (oldirqflag) {
++ u32 irqinitmask = bcma_read32(mdev,
++ BCMA_MIPS_MIPS74K_INTMASK(irq));
++ if (irqinitmask) {
+ struct bcma_device *core;
+
/* backplane irq line is in use, find out who uses
* it and set user to irq 0
*/
- list_for_each_entry_reverse(core, &bus->cores, list) {
+ list_for_each_entry(core, &bus->cores, list) {
if ((1 << bcma_core_mips_irqflag(core)) ==
- oldirqflag) {
+- oldirqflag) {
++ irqinitmask) {
bcma_core_mips_set_irq(core, 0);
-@@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struc
+ break;
+ }
+@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
- pr_info("set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.id, oldirq + 2, irq + 2);
-+ bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n",
-+ dev->id.id, oldirq + 2, irq + 2);
++ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2);
++}
++
++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
++ u16 coreid, u8 unit)
++{
++ struct bcma_device *core;
++
++ core = bcma_find_core_unit(bus, coreid, unit);
++ if (!core) {
++ bcma_warn(bus,
++ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
++ coreid, unit);
++ return;
++ }
++
++ bcma_core_mips_set_irq(core, irq);
}
static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
-@@ -161,7 +161,7 @@ static void bcma_core_mips_dump_irq(stru
+ {
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+ for (i = 0; i <= 6; i++)
+ printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+ printk("\n");
+@@ -161,7 +184,7 @@ static void bcma_core_mips_dump_irq(stru
{
struct bcma_device *core;
bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
}
}
-@@ -171,9 +171,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
struct bcma_bus *bus = mcore->core->bus;
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
return 0;
}
EXPORT_SYMBOL(bcma_cpu_clock);
-@@ -181,26 +181,50 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,76 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
default:
- pr_err("flash not supported.\n");
+ bcma_err(bus, "Flash type not supported\n");
- }
++ }
+
+ if (cc->core->id.rev == 38 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+ bcma_debug(bus, "Found NAND flash\n");
+ bcma_nflash_init(cc);
+ }
-+ }
-+}
-+
+ }
+ }
+
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+ struct bcma_bus *bus = mcore->core->bus;
+ bcma_core_mips_flash_detect(mcore);
+
+ mcore->early_setup_done = true;
- }
-
++}
++
void bcma_core_mips_init(struct bcma_drv_mips *mcore)
-@@ -209,13 +233,17 @@ void bcma_core_mips_init(struct bcma_drv
+ {
+ struct bcma_bus *bus;
struct bcma_device *core;
bus = mcore->core->bus;
+ if (mcore->setup_done)
+ return;
+
-+ bcma_info(bus, "Initializing MIPS core...\n");
-+
-+ bcma_core_mips_early_init(mcore);
++ bcma_debug(bus, "Initializing MIPS core...\n");
- if (!mcore->setup_done)
- mcore->assigned_irqs = 1;
-+ mcore->assigned_irqs = 1;
++ bcma_core_mips_early_init(mcore);
- /* Assign IRQs to all cores on the bus */
+- /* Assign IRQs to all cores on the bus */
- list_for_each_entry_reverse(core, &bus->cores, list) {
-+ list_for_each_entry(core, &bus->cores, list) {
- int mips_irq;
- if (core->irq)
- continue;
-@@ -244,13 +272,8 @@ void bcma_core_mips_init(struct bcma_drv
- break;
+- int mips_irq;
+- if (core->irq)
+- continue;
+-
+- mips_irq = bcma_core_mips_irq(core);
+- if (mips_irq > 4)
+- core->irq = 0;
+- else
+- core->irq = mips_irq + 2;
+- if (core->irq > 5)
+- continue;
+- switch (core->id.id) {
+- case BCMA_CORE_PCI:
+- case BCMA_CORE_PCIE:
+- case BCMA_CORE_ETHERNET:
+- case BCMA_CORE_ETHERNET_GBIT:
+- case BCMA_CORE_MAC_GBIT:
+- case BCMA_CORE_80211:
+- case BCMA_CORE_USB20_HOST:
+- /* These devices get their own IRQ line if available,
+- * the rest goes on IRQ0
+- */
+- if (mcore->assigned_irqs <= 4)
+- bcma_core_mips_set_irq(core,
+- mcore->assigned_irqs++);
+- break;
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5356:
++ case BCMA_CHIP_ID_BCM47162:
++ case BCMA_CHIP_ID_BCM53572:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM4706:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
++ 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
++ 0);
++ break;
++ default:
++ list_for_each_entry(core, &bus->cores, list) {
++ core->irq = bcma_core_mips_irq(core) + 2;
}
++ bcma_err(bus,
++ "Unknown device (0x%x) found, can not configure IRQs\n",
++ bus->chipinfo.id);
}
- pr_info("IRQ reconfiguration done\n");
-+ bcma_info(bus, "IRQ reconfiguration done\n");
++ bcma_debug(bus, "IRQ reconfiguration done\n");
bcma_core_mips_dump_irq(bus);
- if (mcore->setup_done)
}
/**************************************************
-@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
+@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
{
{
struct bcma_bus *bus = pci_get_drvdata(dev);
-@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
+@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
pci_set_drvdata(dev, NULL);
}
}
+EXPORT_SYMBOL_GPL(bcma_find_core);
+
-+static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
-+ u8 unit)
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit)
+{
+ struct bcma_device *core;
+
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -111,41 +140,85 @@ static int bcma_register_cores(struct bc
+@@ -111,41 +140,90 @@ static int bcma_register_cores(struct bc
err = device_register(&core->dev);
if (err) {
+ bcma_err(bus, "Error registering NAND flash\n");
+ }
+#endif
++ err = bcma_gpio_init(&bus->drv_cc);
++ if (err == -ENOTSUPP)
++ bcma_debug(bus, "GPIO driver not activated\n");
++ else if (err)
++ bcma_err(bus, "Error registering GPIO driver: %i\n", err);
+
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+ err = bcma_chipco_watchdog_register(&bus->drv_cc);
if (core) {
bus->drv_cc.core = core;
bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -159,30 +232,47 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -159,30 +237,47 @@ int bcma_bus_register(struct bcma_bus *b
}
/* Init PCIE core */
}
int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -196,14 +286,14 @@ int __init bcma_bus_early_register(struc
+@@ -196,14 +291,14 @@ int __init bcma_bus_early_register(struc
bcma_init_bus(bus);
match.manuf = BCMA_MANUF_BCM;
return -1;
}
-@@ -215,25 +305,25 @@ int __init bcma_bus_early_register(struc
+@@ -215,25 +310,25 @@ int __init bcma_bus_early_register(struc
/* Scan for mips core */
err = bcma_bus_scan_early(bus, &match, core_mips);
if (err) {
return 0;
}
-@@ -259,8 +349,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+@@ -259,8 +354,7 @@ int bcma_bus_resume(struct bcma_bus *bus
struct bcma_device *core;
/* Init CC core */
+ break;
+ default:
+ return "UNKNOWN";
- }
++ }
+
+ for (i = 0; i < size; i++) {
+ if (names[i].id == id->id)
+ return names[i].name;
-+ }
+ }
+
return "UNKNOWN";
}
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
-
-- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
-- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
-- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
-- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
-- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
-- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
-- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
-- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS,
+ SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN,
+ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
-+
+
+- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+ default:
+ return true;
+ }
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -289,6 +350,7 @@ extern void bcma_core_set_clockmode(stru
+ enum bcma_clkmode clkmode);
+ extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+ bool on);
++extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
+ #define BCMA_DMA_TRANSLATION_MASK 0xC0000000
+ #define BCMA_DMA_TRANSLATION_NONE 0x00000000
+ #define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -1,6 +1,8 @@
+@@ -1,6 +1,9 @@
#ifndef LINUX_BCMA_DRIVER_CC_H_
#define LINUX_BCMA_DRIVER_CC_H_
+#include <linux/platform_device.h>
++#include <linux/gpio.h>
+
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
#define BCMA_CC_ID_ID 0x0000FFFF
-@@ -24,7 +26,7 @@
+@@ -24,7 +27,7 @@
#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
#define BCMA_PLLTYPE_NONE 0x00000000
-@@ -45,6 +47,7 @@
+@@ -45,6 +48,7 @@
#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
#define BCMA_CC_CORECTL 0x0008
#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
-@@ -56,6 +59,9 @@
+@@ -56,6 +60,9 @@
#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
#define BCMA_CC_OTPC 0x0014 /* OTP control */
#define BCMA_CC_OTPC_RECWAIT 0xFF000000
#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
-@@ -72,6 +78,8 @@
+@@ -72,6 +79,8 @@
#define BCMA_CC_OTPP_READ 0x40000000
#define BCMA_CC_OTPP_START 0x80000000
#define BCMA_CC_OTPP_BUSY 0x80000000
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
-@@ -79,6 +87,22 @@
+@@ -79,6 +88,23 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
+#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
+#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -108,10 +132,58 @@
+@@ -108,10 +134,58 @@
#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
#define BCMA_CC_FLASHCTL 0x0040
#define BCMA_CC_BCAST_ADDR 0x0050
#define BCMA_CC_BCAST_DATA 0x0054
#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
-@@ -181,6 +253,45 @@
+@@ -181,6 +255,45 @@
#define BCMA_CC_FLASH_CFG 0x0128
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define BCMA_CC_UART0_DATA 0x0300
-@@ -240,7 +351,60 @@
+@@ -240,7 +353,60 @@
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
-@@ -256,6 +420,15 @@
+@@ -256,6 +422,15 @@
/* 4706 PMU */
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
-@@ -284,6 +457,19 @@
+@@ -284,6 +459,19 @@
#define BCMA_CC_PPL_PCHI_OFF 5
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
/* BCM4331 ChipControl numbers. */
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +483,25 @@
+@@ -297,9 +485,25 @@
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -310,11 +512,35 @@ struct bcma_chipcommon_pmu {
+@@ -310,11 +514,35 @@ struct bcma_chipcommon_pmu {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash {
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
-@@ -330,15 +556,24 @@ struct bcma_drv_cc {
+@@ -330,15 +558,30 @@ struct bcma_drv_cc {
u32 capabilities;
u32 capabilities_ext;
u8 setup_done:1;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
+ u32 ticks_per_ms;
+ struct platform_device *watchdog;
++
++ /* Lock for GPIO register access. */
++ spinlock_t gpio_lock;
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++ struct gpio_chip gpio;
++#endif
};
/* Register access */
-@@ -355,14 +590,14 @@ struct bcma_drv_cc {
+@@ -355,14 +598,16 @@ struct bcma_drv_cc {
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
- u32 ticks);
+extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-@@ -378,6 +613,7 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+@@ -375,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
/* PMU support */
extern void bcma_pmu_init(struct bcma_drv_cc *cc);
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
-@@ -387,5 +623,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -387,5 +635,6 @@ extern void bcma_chipco_chipctl_maskset(
u32 offset, u32 mask, u32 set);
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
u32 offset, u32 mask, u32 set);
+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,16 @@ struct bcma_device;
+@@ -35,13 +35,15 @@ struct bcma_device;
struct bcma_drv_mips {
struct bcma_device *core;
u8 setup_done:1;
+- unsigned int assigned_irqs;
+ u8 early_setup_done:1;
- unsigned int assigned_irqs;
};
#ifdef CONFIG_BCMA_DRIVER_MIPS