+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+- p->irq = bcma_port->irq + 2;
++ p->irq = bcma_port->irq;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -29,7 +29,7 @@ config BCMA_HOST_PCI
+@@ -26,10 +26,11 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
help
PCI core hostmode operation (external PCI bus).
-@@ -46,6 +46,15 @@ config BCMA_DRIVER_MIPS
+@@ -46,6 +47,33 @@ config BCMA_DRIVER_MIPS
If unsure, say N
++config BCMA_SFLASH
++ bool
++ depends on BCMA_DRIVER_MIPS
++ default y
++
++config BCMA_NFLASH
++ bool
++ depends on BCMA_DRIVER_MIPS
++ default y
++
+config BCMA_DRIVER_GMAC_CMN
+ bool "BCMA Broadcom GBIT MAC COMMON core driver"
+ depends on BCMA
+
+ If unsure, say N
+
++config BCMA_DRIVER_GPIO
++ bool "BCMA GPIO driver"
++ depends on BCMA && GPIOLIB
++ help
++ Driver to provide access to the GPIO pins of the bcma bus.
++
++ If unsure, say N
++
config BCMA_DEBUG
bool "BCMA debugging"
depends on BCMA
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
-@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver
+@@ -1,8 +1,12 @@
+ bcma-y += main.o scan.o core.o sprom.o
+ bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
++bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
++bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
bcma-y += driver_pci.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
+bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
++bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -10,10 +10,19 @@
+@@ -10,10 +10,21 @@
#define BCMA_CORE_SIZE 0x1000
/* main.c */
-int bcma_bus_register(struct bcma_bus *bus);
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+int __devinit bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
struct bcma_device *core_cc,
-@@ -48,8 +57,12 @@ extern int __init bcma_host_pci_init(voi
+@@ -22,6 +33,8 @@ int __init bcma_bus_early_register(struc
+ int bcma_bus_suspend(struct bcma_bus *bus);
+ int bcma_bus_resume(struct bcma_bus *bus);
+ #endif
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit);
+
+ /* scan.c */
+ int bcma_bus_scan(struct bcma_bus *bus);
+@@ -36,11 +49,36 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_pflash_dev;
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+ /* driver_chipcommon_pmu.c */
+-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
++
++#ifdef CONFIG_BCMA_SFLASH
++/* driver_chipcommon_sflash.c */
++int bcma_sflash_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_sflash_dev;
++#else
++static inline int bcma_sflash_init(struct bcma_drv_cc *cc)
++{
++ bcma_err(cc->core->bus, "Serial flash not supported\n");
++ return 0;
++}
++#endif /* CONFIG_BCMA_SFLASH */
++
++#ifdef CONFIG_BCMA_NFLASH
++/* driver_chipcommon_nflash.c */
++int bcma_nflash_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_nflash_dev;
++#else
++static inline int bcma_nflash_init(struct bcma_drv_cc *cc)
++{
++ bcma_err(cc->core->bus, "NAND flash not supported\n");
++ return 0;
++}
++#endif /* CONFIG_BCMA_NFLASH */
+
+ #ifdef CONFIG_BCMA_HOST_PCI
+ /* host_pci.c */
+@@ -48,8 +86,29 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
+/* driver_pci.c */
+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+
++extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
++
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++/* driver_gpio.c */
++int bcma_gpio_init(struct bcma_drv_cc *cc);
++int bcma_gpio_unregister(struct bcma_drv_cc *cc);
++#else
++static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
++{
++ return -ENOTSUPP;
++}
++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return 0;
++}
++#endif /* CONFIG_BCMA_DRIVER_GPIO */
++
#endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic
- udelay(10);
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,12 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
+
+@@ -42,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -64,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma
+ switch (clkmode) {
+ case BCMA_CLKMODE_FAST:
+ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+- udelay(64);
++ usleep_range(64, 300);
+ for (i = 0; i < 1500; i++) {
+ if (bcma_read32(core, BCMA_CLKCTLST) &
+ BCMA_CLKCTLST_HAVEHT) {
+@@ -74,10 +97,10 @@ void bcma_core_set_clockmode(struct bcma
udelay(10);
}
if (i)
break;
}
}
-@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -101,9 +124,15 @@ void bcma_core_pll_ctl(struct bcma_devic
udelay(10);
}
if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
} else {
- pr_warn("Disabling PLL not supported yet!\n");
-+ bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
}
}
EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
-@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
+@@ -119,8 +148,8 @@ u32 bcma_core_dma_translation(struct bcm
else
return BCMA_DMA_TRANSLATION_DMA32_CMT;
default:
}
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
-@@ -44,7 +44,7 @@ void bcma_core_chipcommon_init(struct bc
+@@ -4,12 +4,15 @@
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include "bcma_private.h"
++#include <linux/bcm47xx_wdt.h>
+ #include <linux/export.h>
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+
+ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+@@ -22,29 +25,136 @@ static inline u32 bcma_cc_write32_masked
+ return value;
+ }
+
+-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+- u32 leddc_on = 10;
+- u32 leddc_off = 90;
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ return bcma_pmu_get_alp_clock(cc);
+
+- if (cc->setup_done)
++ return 20000000;
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
++
++static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 nb;
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ nb = 32;
++ else if (cc->core->id.rev < 26)
++ nb = 16;
++ else
++ nb = (cc->core->id.rev >= 37) ? 32 : 24;
++ } else {
++ nb = 28;
++ }
++ if (nb == 32)
++ return 0xffffffff;
++ else
++ return (1 << nb) - 1;
++}
++
++static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
++ u32 ticks)
++{
++ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
++
++ return bcma_chipco_watchdog_timer_set(cc, ticks);
++}
++
++static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt,
++ u32 ms)
++{
++ struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
++ u32 ticks;
++
++ ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
++ return ticks / cc->ticks_per_ms;
++}
++
++static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
++ /* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
++ return bcma_chipco_get_alp_clock(cc) / 4000;
++ else
++ /* based on 32KHz ILP clock */
++ return 32;
++ } else {
++ return bcma_chipco_get_alp_clock(cc) / 1000;
++ }
++}
++
++int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
++{
++ struct bcm47xx_wdt wdt = {};
++ struct platform_device *pdev;
++
++ wdt.driver_data = cc;
++ wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
++ wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
++ wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
++
++ pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
++ cc->core->bus->num, &wdt,
++ sizeof(wdt));
++ if (IS_ERR(pdev))
++ return PTR_ERR(pdev);
++
++ cc->watchdog = pdev;
++
++ return 0;
++}
++
++void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
++{
++ if (cc->early_setup_done)
+ return;
+
++ spin_lock_init(&cc->gpio_lock);
++
+ if (cc->core->id.rev >= 11)
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+ if (cc->core->id.rev >= 35)
+ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ bcma_pmu_early_init(cc);
++
++ cc->early_setup_done = true;
++}
++
++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++{
++ u32 leddc_on = 10;
++ u32 leddc_off = 90;
++
++ if (cc->setup_done)
++ return;
++
++ bcma_core_chipcommon_early_init(cc);
++
+ if (cc->core->id.rev >= 20) {
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
if (cc->core->id.rev >= 16) {
if (cc->core->bus->sprom.leddc_on_time &&
-@@ -137,8 +137,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc
+ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
+ }
++ cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
+
+ cc->setup_done = true;
+ }
+
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+-void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
++u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+ {
+- /* instant NMI */
+- bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++ u32 maxt;
++ enum bcma_clkmode clkmode;
++
++ maxt = bcma_chipco_watchdog_get_max_timer(cc);
++ if (cc->capabilities & BCMA_CC_CAP_PMU) {
++ if (ticks == 1)
++ ticks = 2;
++ else if (ticks > maxt)
++ ticks = maxt;
++ bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
++ } else {
++ clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
++ bcma_core_set_clockmode(cc->core, clkmode);
++ if (ticks > maxt)
++ ticks = maxt;
++ /* instant NMI */
++ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++ }
++ return ticks;
+ }
+
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+
+ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+
++/*
++ * If the bit is set to 0, chipcommon controlls this GPIO,
++ * if the bit is set to 1, it is used by some part of the chip and not our code.
++ */
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ unsigned long flags;
++ u32 res;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLUP, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
++}
++
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ unsigned long flags;
++ u32 res;
++
++ if (cc->core->id.rev < 20)
++ return 0;
++
++ spin_lock_irqsave(&cc->gpio_lock, flags);
++ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPULLDOWN, mask, value);
++ spin_unlock_irqrestore(&cc->gpio_lock, flags);
++
++ return res;
+ }
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma
+ struct bcma_serial_port *ports = cc->serial_ports;
+
+ if (ccrev >= 11 && ccrev != 15) {
+- /* Fixed ALP clock */
+- baud_base = bcma_pmu_alp_clock(cc);
++ baud_base = bcma_chipco_get_alp_clock(cc);
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+@@ -137,12 +335,11 @@ void bcma_chipco_serial_init(struct bcma
| BCMA_CC_CORECTL_UARTCLKEN);
}
} else {
return;
}
+- irq = bcma_core_mips_irq(cc->core);
++ irq = bcma_core_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_nflash.c
+@@ -0,0 +1,44 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon NAND flash interface
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/platform_device.h>
++#include <linux/bcma/bcma.h>
++
++struct platform_device bcma_nflash_dev = {
++ .name = "bcma_nflash",
++ .num_resources = 0,
++};
++
++/* Initialize NAND flash access */
++int bcma_nflash_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
++ cc->core->id.rev != 38) {
++ bcma_err(bus, "NAND flash on unsupported board!\n");
++ return -ENOTSUPP;
++ }
++
++ if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) {
++ bcma_err(bus, "NAND flash not present according to ChipCommon\n");
++ return -ENODEV;
++ }
++
++ cc->nflash.present = true;
++ if (cc->core->id.rev == 38 &&
++ (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
++ cc->nflash.boot = true;
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ bcma_nflash_dev.dev.platform_data = &cc->nflash;
++
++ return 0;
++}
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -3,7 +3,8 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -54,38 +55,19 @@ void bcma_chipco_regctl_maskset(struct b
+@@ -12,12 +13,13 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
+-static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
++u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+ return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
+
+ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+ {
+@@ -54,19 +56,106 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
--static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
--{
-- struct bcma_bus *bus = cc->core->bus;
--
-- switch (bus->chipinfo.id) {
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
+ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
+
+ switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
+ break;
- default:
- pr_err("PLL init unknown for device 0x%04X\n",
- bus->chipinfo.id);
-- }
--}
--
- static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
- {
- struct bcma_bus *bus = cc->core->bus;
+ }
+ }
+
+@@ -76,16 +165,32 @@ static void bcma_pmu_resources_init(stru
u32 min_msk = 0, max_msk = 0;
switch (bus->chipinfo.id) {
break;
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
+ break;
default:
- pr_err("PMU resource config unknown for device 0x%04X\n",
- bus->chipinfo.id);
}
/* Set the resource masks. */
-@@ -93,22 +75,9 @@ static void bcma_pmu_resources_init(stru
+@@ -93,22 +198,12 @@ static void bcma_pmu_resources_init(stru
bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
if (max_msk)
bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-}
--
+
-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
-{
- struct bcma_bus *bus = cc->core->bus;
-
+-
- switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
- pr_err("PMU switch/regulators init unknown for device "
- "0x%04X\n", bus->chipinfo.id);
- }
-+ /* Add some delay; allow resources to come up and settle. */
++ /*
++ * Add some delay; allow resources to come up and settle.
++ * Delay is required for SoC (early init).
++ */
+ mdelay(2);
}
/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
-@@ -122,8 +91,11 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -122,51 +217,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
val |= BCMA_CHIPCTL_4331_EXTPA_EN;
if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
}
bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
-@@ -134,26 +106,38 @@ void bcma_pmu_workarounds(struct bcma_dr
+ }
+
+-void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
++static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+ {
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
+ /* enable 12 mA drive strenth for 4313 and set chipControl
+ register bit 1 */
+ bcma_chipco_chipctl_maskset(cc, 0,
-+ BCMA_CCTRL_4313_12MA_LED_DRIVE,
++ ~BCMA_CCTRL_4313_12MA_LED_DRIVE,
+ BCMA_CCTRL_4313_12MA_LED_DRIVE);
break;
- case 0x4331:
- "implemented\n");
- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
+ bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
-+ BCMA_CCTRL_43224_GPIO_TOGGLE,
++ ~BCMA_CCTRL_43224_GPIO_TOGGLE,
+ BCMA_CCTRL_43224_GPIO_TOGGLE);
+ bcma_chipco_chipctl_maskset(cc, 0,
-+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
++ ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
+ BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
} else {
- bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ bcma_chipco_chipctl_maskset(cc, 0,
-+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
++ ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
+ BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
}
break;
}
}
-@@ -164,8 +148,8 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+-void bcma_pmu_init(struct bcma_drv_cc *cc)
++void bcma_pmu_early_init(struct bcma_drv_cc *cc)
+ {
+ u32 pmucap;
+
pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
- pmucap);
+ bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
+ cc->pmu.rev, pmucap);
++}
++void bcma_pmu_init(struct bcma_drv_cc *cc)
++{
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
-@@ -174,12 +158,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ ~BCMA_CC_PMU_CTL_NOILPONW);
+@@ -174,37 +287,48 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
-
-- bcma_pmu_pll_init(cc);
+ bcma_pmu_pll_init(cc);
bcma_pmu_resources_init(cc);
- bcma_pmu_swreg_init(cc);
bcma_pmu_workarounds(cc);
}
-@@ -188,23 +167,22 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
+ {
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
- case 0x5357:
- case 0x4749:
- case 53572:
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43421:
++ case BCMA_CHIP_ID_BCM43428:
++ case BCMA_CHIP_ID_BCM43431:
+ case BCMA_CHIP_ID_BCM4716:
-+ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM47162:
-+ case BCMA_CHIP_ID_BCM4313:
-+ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM6362:
/* always 20Mhz */
return 20000 * 1000;
- case 0x5356:
- case 0x5300:
-+ case BCMA_CHIP_ID_BCM5356:
+ case BCMA_CHIP_ID_BCM4706:
++ case BCMA_CHIP_ID_BCM5356:
/* always 25Mhz */
return 25000 * 1000;
++ case BCMA_CHIP_ID_BCM43460:
++ case BCMA_CHIP_ID_BCM4352:
++ case BCMA_CHIP_ID_BCM4360:
++ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++ return 40000 * 1000;
++ else
++ return 20000 * 1000;
default:
- pr_warn("No ALP clock specified for %04X device, "
- "pmu rev. %d, using default %d Hz\n",
}
return BCMA_CC_PMU_ALP_CLOCK;
}
-@@ -221,7 +199,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -212,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+ /* Find the output of the "m" pll divider given pll controls that start with
+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
+ */
+-static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+ {
+ u32 tmp, div, ndiv, p1, p2, fc;
+ struct bcma_bus *bus = cc->core->bus;
+@@ -221,7 +345,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
BUG_ON(!m || m > 4);
/* Detect failure in clock setting */
tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
if (tmp & 0x40000)
-@@ -247,33 +226,62 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +365,96 @@ static u32 bcma_pmu_clock(struct bcma_dr
+ ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
+
+ /* Do calculation in Mhz */
+- fc = bcma_pmu_alp_clock(cc) / 1000000;
++ fc = bcma_pmu_get_alp_clock(cc) / 1000000;
+ fc = (p1 * ndiv * fc) / p2;
+
+ /* Return clock in Hertz */
return (fc / div) * 1000000;
}
-+static u32 bcma_pmu_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+{
+ u32 tmp, ndiv, p1div, p2div;
+ u32 clock;
+}
+
/* query bus clock frequency for PMU-enabled chipcommon */
- u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
- case 0x4716:
- case 0x4748:
- case 47162:
-+ case BCMA_CHIP_ID_BCM4716:
-+ case BCMA_CHIP_ID_BCM4748:
-+ case BCMA_CHIP_ID_BCM47162:
- return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
+- return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
- case 0x5356:
-+ case BCMA_CHIP_ID_BCM5356:
- return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
+- return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
- case 0x5357:
- case 0x4749:
-+ case BCMA_CHIP_ID_BCM5357:
-+ case BCMA_CHIP_ID_BCM4749:
- return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
+- return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+- BCMA_CC_PMU5_MAINPLL_SSB);
- case 0x5300:
- return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
- BCMA_CC_PMU5_MAINPLL_SSB);
- case 53572:
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ case BCMA_CHIP_ID_BCM47162:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM5356:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
+ case BCMA_CHIP_ID_BCM4706:
-+ return bcma_pmu_clock_bcm4706(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
-+ BCMA_CC_PMU5_MAINPLL_SSB);
++ return bcma_pmu_pll_clock_bcm4706(cc,
++ BCMA_CC_PMU4706_MAINPLL_PLL0,
++ BCMA_CC_PMU5_MAINPLL_SSB);
+ case BCMA_CHIP_ID_BCM53572:
return 75000000;
default:
- pr_warn("No backplane clock specified for %04X device, "
- "pmu rev. %d, using default %d Hz\n",
- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
-+ bcma_warn(bus, "No backplane clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
++ bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
}
return BCMA_CC_PMU_HT_CLOCK;
}
-@@ -283,17 +291,21 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
+
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
return 300000000;
++ /* New PMUs can have different clock for bus and CPU */
if (cc->pmu.rev >= 5) {
u32 pll;
switch (bus->chipinfo.id) {
- case 0x5356:
+ case BCMA_CHIP_ID_BCM4706:
-+ return bcma_pmu_clock_bcm4706(cc,
++ return bcma_pmu_pll_clock_bcm4706(cc,
+ BCMA_CC_PMU4706_MAINPLL_PLL0,
+ BCMA_CC_PMU5_MAINPLL_CPU);
+ case BCMA_CHIP_ID_BCM5356:
pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
break;
default:
-@@ -301,10 +313,188 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +462,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
- /* TODO: if (bus->chipinfo.id == 0x5300)
- return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
- return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
- }
-
- return bcma_pmu_get_clockcontrol(cc);
- }
+- return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++ return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++ }
++
++ /* On old PMUs CPU has the same clock as the bus */
++ return bcma_pmu_get_bus_clock(cc);
++}
+
+static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ u32 value)
+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4331:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 0x03000a08);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM43224:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4716:
+ 0x88888815);
+ }
+
-+ tmp = 3 << 9;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ break;
+
+ case BCMA_CHIP_ID_BCM43227:
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
-+ tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ bus->chipinfo.id);
+ break;
-+ }
-+
+ }
+
+- return bcma_pmu_get_clockcontrol(cc);
+ tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
+ bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
-+}
+ }
+EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -0,0 +1,165 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon serial flash interface
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/platform_device.h>
++#include <linux/bcma/bcma.h>
++
++static struct resource bcma_sflash_resource = {
++ .name = "bcma_sflash",
++ .start = BCMA_SOC_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device bcma_sflash_dev = {
++ .name = "bcma_sflash",
++ .resource = &bcma_sflash_resource,
++ .num_resources = 1,
++};
++
++struct bcma_sflash_tbl_e {
++ char *name;
++ u32 id;
++ u32 blocksize;
++ u16 numblocks;
++};
++
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++ { "M25P20", 0x11, 0x10000, 4, },
++ { "M25P40", 0x12, 0x10000, 8, },
++
++ { "M25P16", 0x14, 0x10000, 32, },
++ { "M25P32", 0x15, 0x10000, 64, },
++ { "M25P64", 0x16, 0x10000, 128, },
++ { "M25FL128", 0x17, 0x10000, 256, },
++ { 0 },
++};
++
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++ { "SST25WF512", 1, 0x1000, 16, },
++ { "SST25VF512", 0x48, 0x1000, 16, },
++ { "SST25WF010", 2, 0x1000, 32, },
++ { "SST25VF010", 0x49, 0x1000, 32, },
++ { "SST25WF020", 3, 0x1000, 64, },
++ { "SST25VF020", 0x43, 0x1000, 64, },
++ { "SST25WF040", 4, 0x1000, 128, },
++ { "SST25VF040", 0x44, 0x1000, 128, },
++ { "SST25VF040B", 0x8d, 0x1000, 128, },
++ { "SST25WF080", 5, 0x1000, 256, },
++ { "SST25VF080B", 0x8e, 0x1000, 256, },
++ { "SST25VF016", 0x41, 0x1000, 512, },
++ { "SST25VF032", 0x4a, 0x1000, 1024, },
++ { "SST25VF064", 0x4b, 0x1000, 2048, },
++ { 0 },
++};
++
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++ { "AT45DB011", 0xc, 256, 512, },
++ { "AT45DB021", 0x14, 256, 1024, },
++ { "AT45DB041", 0x1c, 256, 2048, },
++ { "AT45DB081", 0x24, 256, 4096, },
++ { "AT45DB161", 0x2c, 512, 4096, },
++ { "AT45DB321", 0x34, 512, 8192, },
++ { "AT45DB642", 0x3c, 1024, 8192, },
++ { 0 },
++};
++
++static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
++{
++ int i;
++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
++ BCMA_CC_FLASHCTL_START | opcode);
++ for (i = 0; i < 1000; i++) {
++ if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
++ BCMA_CC_FLASHCTL_BUSY))
++ return;
++ cpu_relax();
++ }
++ bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
++}
++
++/* Initialize serial flash access */
++int bcma_sflash_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ struct bcma_sflash *sflash = &cc->sflash;
++ const struct bcma_sflash_tbl_e *e;
++ u32 id, id2;
++
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++ case BCMA_CC_FLASHT_STSER:
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
++
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++
++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++
++ switch (id) {
++ case 0xbf:
++ for (e = bcma_sflash_sst_tbl; e->name; e++) {
++ if (e->id == id2)
++ break;
++ }
++ break;
++ case 0x13:
++ return -ENOTSUPP;
++ default:
++ for (e = bcma_sflash_st_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ break;
++ }
++ if (!e->name) {
++ bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
++ return -ENOTSUPP;
++ }
++
++ break;
++ case BCMA_CC_FLASHT_ATSER:
++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
++
++ for (e = bcma_sflash_at_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ if (!e->name) {
++ bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
++ return -ENOTSUPP;
++ }
++
++ break;
++ default:
++ bcma_err(bus, "Unsupported flash type\n");
++ return -ENOTSUPP;
++ }
++
++ sflash->window = BCMA_SOC_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
++ bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
++ e->name, sflash->size / 1024, sflash->blocksize,
++ sflash->numblocks);
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
++ sflash->size;
++ bcma_sflash_dev.dev.platform_data = sflash;
++
++ return 0;
++}
+--- /dev/null
+++ b/drivers/bcma/driver_gmac_cmn.c
@@ -0,0 +1,14 @@
+/*
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
-+#include "bcma_private.h"
-+#include <linux/bcma/bcma.h>
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
++{
++ mutex_init(&gc->phy_mutex);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_gpio.c
+@@ -0,0 +1,114 @@
++/*
++ * Broadcom specific AMBA
++ * GPIO driver
++ *
++ * Copyright 2011, Broadcom Corporation
++ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/gpio.h>
++#include <linux/export.h>
++#include <linux/bcma/bcma.h>
++
++#include "bcma_private.h"
++
++static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
++{
++ return container_of(chip, struct bcma_drv_cc, gpio);
++}
++
++static int bcma_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ return !!bcma_chipco_gpio_in(cc, 1 << gpio);
++}
++
++static void bcma_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++}
++
++static int bcma_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 0);
++ return 0;
++}
++
++static int bcma_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
++ int value)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_outen(cc, 1 << gpio, 1 << gpio);
++ bcma_chipco_gpio_out(cc, 1 << gpio, value ? 1 << gpio : 0);
++ return 0;
++}
++
++static int bcma_gpio_request(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ bcma_chipco_gpio_control(cc, 1 << gpio, 0);
++ /* clear pulldown */
++ bcma_chipco_gpio_pulldown(cc, 1 << gpio, 0);
++ /* Set pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 1 << gpio);
++
++ return 0;
++}
++
++static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ /* clear pullup */
++ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
++}
++
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ return bcma_core_irq(cc->core);
++ else
++ return -EINVAL;
++}
+
-+void __devinit bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
++int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
-+ mutex_init(&gc->phy_mutex);
++ struct gpio_chip *chip = &cc->gpio;
++
++ chip->label = "bcma_gpio";
++ chip->owner = THIS_MODULE;
++ chip->request = bcma_gpio_request;
++ chip->free = bcma_gpio_free;
++ chip->get = bcma_gpio_get_value;
++ chip->set = bcma_gpio_set_value;
++ chip->direction_input = bcma_gpio_direction_input;
++ chip->direction_output = bcma_gpio_direction_output;
++ chip->to_irq = bcma_gpio_to_irq;
++ chip->ngpio = 16;
++ /* There is just one SoC in one device and its GPIO addresses should be
++ * deterministic to address them more easily. The other buses could get
++ * a random base number. */
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ chip->base = 0;
++ else
++ chip->base = -1;
++
++ return gpiochip_add(chip);
++}
++
++int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return gpiochip_remove(&cc->gpio);
+}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -22,15 +22,15 @@
+@@ -14,23 +14,45 @@
+
+ #include <linux/bcma/bcma.h>
+
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+ #include <linux/time.h>
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data bcma_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource bcma_pflash_resource = {
++ .name = "bcma_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device bcma_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &bcma_pflash_data,
++ },
++ .resource = &bcma_pflash_resource,
++ .num_resources = 1,
++};
++
/* The 47162a0 hangs when reading MIPS DMP registers registers */
static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
{
dev->bus->chipinfo.pkg == 11 &&
dev->id.id == BCMA_CORE_USB20_HOST;
}
-@@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struc
+@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct
+ return dev->core_index;
+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+- return flag & 0x1F;
++ if (flag)
++ return flag & 0x1F;
++ else
++ return 0x3f;
+ }
+
+ /* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ * If not supported, 6 is returned.
+ */
+-unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+ unsigned int irq;
+
+ irqflag = bcma_core_mips_irqflag(dev);
++ if (irqflag == 0x3f)
++ return 6;
+
+- for (irq = 1; irq <= 4; irq++)
++ for (irq = 0; irq <= 4; irq++)
+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+ (1 << irqflag))
+ return irq;
+
+- return 0;
++ return 5;
++}
++
++unsigned int bcma_core_irq(struct bcma_device *dev)
++{
++ unsigned int mips_irq = bcma_core_mips_irq(dev);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
+ }
+-EXPORT_SYMBOL(bcma_core_mips_irq);
++EXPORT_SYMBOL(bcma_core_irq);
+
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+@@ -114,8 +149,8 @@ static void bcma_core_mips_set_irq(struc
+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
+ ~(1 << irqflag));
+- else
+- bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++ else if (oldirq != 5)
++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
+
+ /* assign the new one */
+ if (irq == 0) {
+@@ -123,17 +158,17 @@ static void bcma_core_mips_set_irq(struc
+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+ (1 << irqflag));
+ } else {
+- u32 oldirqflag = bcma_read32(mdev,
+- BCMA_MIPS_MIPS74K_INTMASK(irq));
+- if (oldirqflag) {
++ u32 irqinitmask = bcma_read32(mdev,
++ BCMA_MIPS_MIPS74K_INTMASK(irq));
++ if (irqinitmask) {
+ struct bcma_device *core;
+
+ /* backplane irq line is in use, find out who uses
+ * it and set user to irq 0
+ */
+- list_for_each_entry_reverse(core, &bus->cores, list) {
++ list_for_each_entry(core, &bus->cores, list) {
+ if ((1 << bcma_core_mips_irqflag(core)) ==
+- oldirqflag) {
++ irqinitmask) {
+ bcma_core_mips_set_irq(core, 0);
+ break;
+ }
+@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
- pr_info("set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.id, oldirq + 2, irq + 2);
-+ bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n",
-+ dev->id.id, oldirq + 2, irq + 2);
++ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2);
++}
++
++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq,
++ u16 coreid, u8 unit)
++{
++ struct bcma_device *core;
++
++ core = bcma_find_core_unit(bus, coreid, unit);
++ if (!core) {
++ bcma_warn(bus,
++ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n",
++ coreid, unit);
++ return;
++ }
++
++ bcma_core_mips_set_irq(core, irq);
}
static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
-@@ -173,7 +173,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+ {
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+ for (i = 0; i <= 6; i++)
+ printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+ printk("\n");
+@@ -161,7 +212,7 @@ static void bcma_core_mips_dump_irq(stru
+ {
+ struct bcma_device *core;
+
+- list_for_each_entry_reverse(core, &bus->cores, list) {
++ list_for_each_entry(core, &bus->cores, list) {
+ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
+ }
+ }
+@@ -171,9 +222,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+ struct bcma_bus *bus = mcore->core->bus;
+
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
- return bcma_pmu_get_clockcpu(&bus->drv_cc);
+- return bcma_pmu_get_clockcpu(&bus->drv_cc);
++ return bcma_pmu_get_cpu_clock(&bus->drv_cc);
- pr_err("No PMU available, need this to get the cpu clock\n");
+ bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
return 0;
}
EXPORT_SYMBOL(bcma_cpu_clock);
-@@ -185,10 +185,10 @@ static void bcma_core_mips_flash_detect(
- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+@@ -181,25 +232,81 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+ {
+ struct bcma_bus *bus = mcore->core->bus;
++ struct bcma_drv_cc *cc = &bus->drv_cc;
++ struct bcma_pflash *pflash = &cc->pflash;
+
+- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
case BCMA_CC_FLASHT_ATSER:
- pr_err("Serial flash not supported.\n");
-+ bcma_err(bus, "Serial flash not supported.\n");
++ bcma_debug(bus, "Found serial flash\n");
++ bcma_sflash_init(cc);
break;
case BCMA_CC_FLASHT_PARA:
- pr_info("found parallel flash.\n");
-+ bcma_info(bus, "found parallel flash.\n");
- bus->drv_cc.pflash.window = 0x1c000000;
- bus->drv_cc.pflash.window_size = 0x02000000;
-
-@@ -199,7 +199,7 @@ static void bcma_core_mips_flash_detect(
- bus->drv_cc.pflash.buswidth = 2;
+- bus->drv_cc.pflash.window = 0x1c000000;
+- bus->drv_cc.pflash.window_size = 0x02000000;
++ bcma_debug(bus, "Found parallel flash\n");
++ pflash->present = true;
++ pflash->window = BCMA_SOC_FLASH2;
++ pflash->window_size = BCMA_SOC_FLASH2_SZ;
+
+- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
++ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
+ BCMA_CC_FLASH_CFG_DS) == 0)
+- bus->drv_cc.pflash.buswidth = 1;
++ pflash->buswidth = 1;
+ else
+- bus->drv_cc.pflash.buswidth = 2;
++ pflash->buswidth = 2;
++
++ bcma_pflash_data.width = pflash->buswidth;
++ bcma_pflash_resource.start = pflash->window;
++ bcma_pflash_resource.end = pflash->window + pflash->window_size;
++
break;
default:
- pr_err("flash not supported.\n");
-+ bcma_err(bus, "flash not supported.\n");
++ bcma_err(bus, "Flash type not supported\n");
++ }
++
++ if (cc->core->id.rev == 38 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
++ if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
++ bcma_debug(bus, "Found NAND flash\n");
++ bcma_nflash_init(cc);
++ }
++ }
++}
++
++void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
++{
++ struct bcma_bus *bus = mcore->core->bus;
++
++ if (mcore->early_setup_done)
++ return;
++
++ bcma_chipco_serial_init(&bus->drv_cc);
++ bcma_core_mips_flash_detect(mcore);
++
++ mcore->early_setup_done = true;
++}
++
++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus)
++{
++ struct bcma_device *cpu, *pcie, *i2s;
++
++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK)
++ * (IRQ flags > 7 are ignored when setting the interrupt masks)
++ */
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 &&
++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748)
++ return;
++
++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE);
++ i2s = bcma_find_core(bus, BCMA_CORE_I2S);
++ if (cpu && pcie && i2s &&
++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) {
++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87);
++ bcma_debug(bus,
++ "Moved i2s interrupt to oob line 7 instead of 8\n");
}
}
-@@ -209,7 +209,7 @@ void bcma_core_mips_init(struct bcma_drv
+@@ -209,48 +316,59 @@ void bcma_core_mips_init(struct bcma_drv
struct bcma_device *core;
bus = mcore->core->bus;
- pr_info("Initializing MIPS core...\n");
-+ bcma_info(bus, "Initializing MIPS core...\n");
++ if (mcore->setup_done)
++ return;
- if (!mcore->setup_done)
- mcore->assigned_irqs = 1;
-@@ -244,7 +244,7 @@ void bcma_core_mips_init(struct bcma_drv
- break;
+- if (!mcore->setup_done)
+- mcore->assigned_irqs = 1;
++ bcma_debug(bus, "Initializing MIPS core...\n");
+
+- /* Assign IRQs to all cores on the bus */
+- list_for_each_entry_reverse(core, &bus->cores, list) {
+- int mips_irq;
+- if (core->irq)
+- continue;
+-
+- mips_irq = bcma_core_mips_irq(core);
+- if (mips_irq > 4)
+- core->irq = 0;
+- else
+- core->irq = mips_irq + 2;
+- if (core->irq > 5)
+- continue;
+- switch (core->id.id) {
+- case BCMA_CORE_PCI:
+- case BCMA_CORE_PCIE:
+- case BCMA_CORE_ETHERNET:
+- case BCMA_CORE_ETHERNET_GBIT:
+- case BCMA_CORE_MAC_GBIT:
+- case BCMA_CORE_80211:
+- case BCMA_CORE_USB20_HOST:
+- /* These devices get their own IRQ line if available,
+- * the rest goes on IRQ0
+- */
+- if (mcore->assigned_irqs <= 4)
+- bcma_core_mips_set_irq(core,
+- mcore->assigned_irqs++);
+- break;
++ bcma_core_mips_early_init(mcore);
++
++ bcma_fix_i2s_irqflag(bus);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM4716:
++ case BCMA_CHIP_ID_BCM4748:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5356:
++ case BCMA_CHIP_ID_BCM47162:
++ case BCMA_CHIP_ID_BCM53572:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ break;
++ case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4749:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0);
++ break;
++ case BCMA_CHIP_ID_BCM4706:
++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0);
++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT,
++ 0);
++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1);
++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0);
++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON,
++ 0);
++ break;
++ default:
++ list_for_each_entry(core, &bus->cores, list) {
++ core->irq = bcma_core_irq(core);
}
++ bcma_err(bus,
++ "Unknown device (0x%x) found, can not configure IRQs\n",
++ bus->chipinfo.id);
}
- pr_info("IRQ reconfiguration done\n");
-+ bcma_info(bus, "IRQ reconfiguration done\n");
++ bcma_debug(bus, "IRQ reconfiguration done\n");
bcma_core_mips_dump_irq(bus);
- if (mcore->setup_done)
+- if (mcore->setup_done)
+- return;
+-
+- bcma_chipco_serial_init(&bus->drv_cc);
+- bcma_core_mips_flash_detect(mcore);
+ mcore->setup_done = true;
+ }
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -2,8 +2,9 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -16,40 +17,39 @@
+@@ -16,120 +17,124 @@
* R/W ops.
**************************************************/
+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
break;
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
-@@ -57,79 +57,84 @@ static void bcma_pcie_mdio_set_phy(struc
+ }
static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
{
+ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
break;
}
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
break;
- msleep(1);
+- msleep(1);
++ usleep_range(1000, 2000);
}
- pcicore_write32(pc, mdio_control, 0);
+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
-@@ -2,13 +2,592 @@
+@@ -2,13 +2,616 @@
* Broadcom specific AMBA
* PCI Core in hostmode
*
+ chipid_top != 0x5300)
+ return false;
+
-+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-+ bcma_info(bus, "This PCI core is disabled and not working\n");
-+ return false;
-+ }
-+
+ bcma_core_enable(pc->core, 0);
+
+ return !mips_busprobe32(tmp, pc->core->io_addr);
+out:
+ return addr;
+}
-
--void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++
+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ void *buf, int len)
- {
-- pr_err("No support for PCI core in hostmode yet\n");
++{
+ int err = -EINVAL;
+ u32 addr, val;
+ void __iomem *mmio = 0;
+ if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
-+ return -EINVAL;
++ goto out;
+
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
++ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
++ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
-+
-+ val = readl(mmio);
+ }
+ val >>= (8 * (off & 3));
+
+out:
+ return err;
+}
-+
+
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ const void *buf, int len)
-+{
+ {
+- pr_err("No support for PCI core in hostmode yet\n");
+ int err = -EINVAL;
-+ u32 addr = 0, val = 0;
++ u32 addr, val;
+ void __iomem *mmio = 0;
+ u16 chipid = pc->core->bus->chipinfo.id;
+
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ goto out;
++
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ if (off < PCI_CONFIG_SPACE_SIZE) {
-+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFC);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
-+ mmio = ioremap_nocache(addr, sizeof(val));
-+ if (!mmio)
-+ goto out;
++ addr |= (off & 0xFC);
++ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+ }
+
+ switch (len) {
+ case 1:
-+ val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
-+ val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
+ val = *((const u32 *)buf);
+ break;
+ }
-+ if (dev == 0 && !addr) {
++ if (dev == 0) {
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
-+ bcma_pcie_write_config(pc, addr, val);
++ if (off >= PCI_CONFIG_SPACE_SIZE)
++ bcma_pcie_write_config(pc, addr, val);
++ else
++ pcicore_write32(pc, addr, val);
+ } else {
+ writel(val, mmio);
+
+ /* check for Header type 0 */
+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+ sizeof(u8));
-+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
+ return cap_ptr;
+
+ /* check if the capability pointer field exists */
+
+ bcma_info(bus, "PCIEcore in host mode found\n");
+
++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
++ bcma_info(bus, "This PCIE core is disabled and not working\n");
++ return;
++ }
++
+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
+ if (!pc_host) {
+ bcma_err(bus, "can not allocate memory");
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+
+ /* Reset RC */
-+ udelay(3000);
++ usleep_range(3000, 5000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-+ udelay(1000);
++ msleep(50);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ BCMA_CORE_PCI_CTL_RST_OE);
+
+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
++ pc_host->io_resource.start = 0x100;
++ pc_host->io_resource.end = 0x47F;
+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ tmp | BCMA_SOC_PCI_MEM);
+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
+ BCMA_SOC_PCI_MEM_SZ - 1;
++ pc_host->io_resource.start = 0x480;
++ pc_host->io_resource.end = 0x7FF;
+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ * before issuing configuration requests to PCI Express
+ * devices.
+ */
-+ udelay(100000);
++ msleep(100);
+
+ bcma_core_pci_enable_crs(pc);
+
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++ u16 val16;
++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ val16 |= (2 << 5); /* Max payload size of 512 */
++ val16 |= (2 << 12); /* MRRS 512 */
++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ }
++
+ /* Enable PCI bridge BAR0 memory & master access */
+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
+ set_io_port_base(pc_host->pci_controller.io_map_base);
+ /* Give some time to the PCI controller to configure itself with the new
+ * values. Not waiting at this point causes crashes of the machine. */
-+ mdelay(10);
++ usleep_range(10000, 15000);
+ register_pci_controller(&pc_host->pci_controller);
+ return;
+}
+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
+{
+ struct resource *res;
-+ int pos;
++ int pos, err;
+
+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
+ /* This is not a device on the PCI-core bridge. */
+
+ for (pos = 0; pos < 6; pos++) {
+ res = &dev->resource[pos];
-+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM))
-+ pci_assign_resource(dev, pos);
++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) {
++ err = pci_assign_resource(dev, pos);
++ if (err)
++ pr_err("PCI: Problem fixing up the addresses on %s\n",
++ pci_name(dev));
++ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
-+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ dev->irq = bcma_core_irq(pc_host->pdev->core);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ return 0;
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
-+ return bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ return bcma_core_irq(pc_host->pdev->core);
}
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
}
/* Provides access to the requested core. Returns base offset that has to be
-@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci
+@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
+ }
+
+ #ifdef CONFIG_BCMA_BLOCKIO
+-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+- size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm
+ }
+ }
+
+-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
+- size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_write(struct bcma_device *core,
++ const void *buffer, size_t count,
++ u16 offset, u8 reg_width)
+ {
+ void __iomem *addr = core->bus->mmio + offset;
+ if (core->bus->mapped_core != core)
+@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc
+ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+ }
+
+-const struct bcma_host_ops bcma_host_pci_ops = {
++static const struct bcma_host_ops bcma_host_pci_ops = {
+ .read8 = bcma_host_pci_read8,
+ .read16 = bcma_host_pci_read16,
+ .read32 = bcma_host_pci_read32,
+@@ -154,8 +155,8 @@ const struct bcma_host_ops bcma_host_pci
.awrite32 = bcma_host_pci_awrite32,
};
{
struct bcma_bus *bus;
int err = -ENOMEM;
-@@ -188,7 +188,7 @@ static int bcma_host_pci_probe(struct pc
+@@ -188,7 +189,7 @@ static int bcma_host_pci_probe(struct pc
/* SSB needed additional powering up, do we have any AMBA PCI cards? */
if (!pci_is_pcie(dev))
/* Map MMIO */
err = -ENOMEM;
-@@ -201,6 +201,9 @@ static int bcma_host_pci_probe(struct pc
+@@ -201,6 +202,9 @@ static int bcma_host_pci_probe(struct pc
bus->hosttype = BCMA_HOSTTYPE_PCI;
bus->ops = &bcma_host_pci_ops;
/* Register */
err = bcma_bus_register(bus);
if (err)
-@@ -222,7 +225,7 @@ err_kfree_bus:
+@@ -222,7 +226,7 @@ err_kfree_bus:
return err;
}
{
struct bcma_bus *bus = pci_get_drvdata(dev);
-@@ -265,6 +268,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
+ pci_set_drvdata(dev, NULL);
+ }
+
+-#ifdef CONFIG_PM
++#ifdef CONFIG_PM_SLEEP
+ static int bcma_host_pci_suspend(struct device *dev)
+ {
+ struct pci_dev *pdev = to_pci_dev(dev);
+@@ -257,17 +261,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+ bcma_host_pci_resume);
+ #define BCMA_PM_OPS (&bcma_pm_ops)
+
+-#else /* CONFIG_PM */
++#else /* CONFIG_PM_SLEEP */
+
+ #define BCMA_PM_OPS NULL
+
+-#endif /* CONFIG_PM */
++#endif /* CONFIG_PM_SLEEP */
static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
-@@ -277,7 +281,7 @@ static struct pci_driver bcma_pci_bridge
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
+@@ -277,7 +285,7 @@ static struct pci_driver bcma_pci_bridge
.name = "bcma-pci-bridge",
.id_table = bcma_pci_bridge_tbl,
.probe = bcma_host_pci_probe,
.driver.pm = BCMA_PM_OPS,
};
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
+ writel(value, core->io_wrap + offset);
+ }
+
+-const struct bcma_host_ops bcma_host_soc_ops = {
++static const struct bcma_host_ops bcma_host_soc_ops = {
+ .read8 = bcma_host_soc_read8,
+ .read16 = bcma_host_soc_read16,
+ .read32 = bcma_host_soc_read32,
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -13,6 +13,12 @@
+@@ -7,12 +7,19 @@
+
+ #include "bcma_private.h"
+ #include <linux/module.h>
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+
MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
MODULE_LICENSE("GPL");
static int bcma_bus_match(struct device *dev, struct device_driver *drv);
static int bcma_device_probe(struct device *dev);
static int bcma_device_remove(struct device *dev);
-@@ -55,7 +61,14 @@ static struct bus_type bcma_bus_type = {
+@@ -55,7 +62,14 @@ static struct bus_type bcma_bus_type = {
.dev_attrs = bcma_device_attrs,
};
{
struct bcma_device *core;
-@@ -65,6 +78,7 @@ static struct bcma_device *bcma_find_cor
+@@ -65,6 +79,38 @@ static struct bcma_device *bcma_find_cor
}
return NULL;
}
+EXPORT_SYMBOL_GPL(bcma_find_core);
++
++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++ u8 unit)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->id.id == coreid && core->core_unit == unit)
++ return core;
++ }
++ return NULL;
++}
++
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
static void bcma_release_core_dev(struct device *dev)
{
-@@ -84,16 +98,18 @@ static int bcma_register_cores(struct bc
+@@ -84,16 +130,23 @@ static int bcma_register_cores(struct bc
list_for_each_entry(core, &bus->cores, list) {
/* We support that cores ourself */
switch (core->id.id) {
continue;
}
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -111,8 +127,9 @@ static int bcma_register_cores(struct bc
+@@ -111,41 +164,98 @@ static int bcma_register_cores(struct bc
err = device_register(&core->dev);
if (err) {
continue;
}
core->dev_registered = true;
-@@ -132,20 +149,24 @@ static void bcma_unregister_cores(struct
+ dev_id++;
+ }
+
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ if (bus->drv_cc.pflash.present) {
++ err = platform_device_register(&bcma_pflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering parallel flash\n");
++ }
++#endif
++
++#ifdef CONFIG_BCMA_SFLASH
++ if (bus->drv_cc.sflash.present) {
++ err = platform_device_register(&bcma_sflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering serial flash\n");
++ }
++#endif
++
++#ifdef CONFIG_BCMA_NFLASH
++ if (bus->drv_cc.nflash.present) {
++ err = platform_device_register(&bcma_nflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering NAND flash\n");
++ }
++#endif
++ err = bcma_gpio_init(&bus->drv_cc);
++ if (err == -ENOTSUPP)
++ bcma_debug(bus, "GPIO driver not activated\n");
++ else if (err)
++ bcma_err(bus, "Error registering GPIO driver: %i\n", err);
++
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++ err = bcma_chipco_watchdog_register(&bus->drv_cc);
++ if (err)
++ bcma_err(bus, "Error registering watchdog driver\n");
++ }
++
+ return 0;
+ }
+
+ static void bcma_unregister_cores(struct bcma_bus *bus)
+ {
+- struct bcma_device *core;
++ struct bcma_device *core, *tmp;
+
+- list_for_each_entry(core, &bus->cores, list) {
++ list_for_each_entry_safe(core, tmp, &bus->cores, list) {
++ list_del(&core->list);
+ if (core->dev_registered)
+ device_unregister(&core->dev);
}
++ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
++ platform_device_unregister(bus->drv_cc.watchdog);
}
-int bcma_bus_register(struct bcma_bus *bus)
return -1;
}
++ /* Early init CC core */
++ core = bcma_find_core(bus, bcma_cc_core_id(bus));
++ if (core) {
++ bus->drv_cc.core = core;
++ bcma_core_chipcommon_early_init(&bus->drv_cc);
++ }
++
++ /* Try to get SPROM */
++ err = bcma_sprom_get(bus);
++ if (err == -ENOENT) {
++ bcma_err(bus, "No SPROM available\n");
++ } else if (err)
++ bcma_err(bus, "Failed to get SPROM: %d\n", err);
++
/* Init CC core */
- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+ core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
bus->drv_cc.core = core;
bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -165,17 +186,24 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_core_pci_init(&bus->drv_pci);
+@@ -159,30 +269,54 @@ int bcma_bus_register(struct bcma_bus *b
+ }
+
+ /* Init PCIE core */
+- core = bcma_find_core(bus, BCMA_CORE_PCIE);
++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
+ if (core) {
+- bus->drv_pci.core = core;
+- bcma_core_pci_init(&bus->drv_pci);
++ bus->drv_pci[0].core = core;
++ bcma_core_pci_init(&bus->drv_pci[0]);
}
+- /* Try to get SPROM */
+- err = bcma_sprom_get(bus);
+- if (err == -ENOENT) {
+- pr_err("No SPROM available\n");
+- } else if (err)
+- pr_err("Failed to get SPROM: %d\n", err);
++ /* Init PCIE core */
++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
++ if (core) {
++ bus->drv_pci[1].core = core;
++ bcma_core_pci_init(&bus->drv_pci[1]);
++ }
++
+ /* Init GBIT MAC COMMON core */
+ core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
+ if (core) {
+ bus->drv_gmac_cmn.core = core;
+ bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
+ }
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
-- pr_err("No SPROM available\n");
-+ bcma_err(bus, "No SPROM available\n");
- } else if (err)
-- pr_err("Failed to get SPROM: %d\n", err);
-+ bcma_err(bus, "Failed to get SPROM: %d\n", err);
/* Register found cores */
bcma_register_cores(bus);
return 0;
}
-@@ -196,14 +224,14 @@ int __init bcma_bus_early_register(struc
+
+ void bcma_bus_unregister(struct bcma_bus *bus)
+ {
++ struct bcma_device *cores[3];
++ int err;
++
++ err = bcma_gpio_unregister(&bus->drv_cc);
++ if (err == -EBUSY)
++ bcma_err(bus, "Some GPIOs are still in use.\n");
++ else if (err)
++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
++
++ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
++ cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
++
+ bcma_unregister_cores(bus);
++
++ kfree(cores[2]);
++ kfree(cores[1]);
++ kfree(cores[0]);
+ }
+
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -196,14 +330,14 @@ int __init bcma_bus_early_register(struc
bcma_init_bus(bus);
match.manuf = BCMA_MANUF_BCM;
return -1;
}
-@@ -215,12 +243,12 @@ int __init bcma_bus_early_register(struc
+@@ -215,25 +349,25 @@ int __init bcma_bus_early_register(struc
/* Scan for mips core */
err = bcma_bus_scan_early(bus, &match, core_mips);
if (err) {
return -1;
}
- /* Init CC core */
+- /* Init CC core */
- core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ /* Early init CC core */
+ core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
bus->drv_cc.core = core;
- bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -233,7 +261,7 @@ int __init bcma_bus_early_register(struc
- bcma_core_mips_init(&bus->drv_mips);
+- bcma_core_chipcommon_init(&bus->drv_cc);
++ bcma_core_chipcommon_early_init(&bus->drv_cc);
+ }
+
+- /* Init MIPS core */
++ /* Early init MIPS core */
+ core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ if (core) {
+ bus->drv_mips.core = core;
+- bcma_core_mips_init(&bus->drv_mips);
++ bcma_core_mips_early_init(&bus->drv_mips);
}
- pr_info("Early bus registered\n");
return 0;
}
-@@ -259,8 +287,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+@@ -259,8 +393,7 @@ int bcma_bus_resume(struct bcma_bus *bus
struct bcma_device *core;
/* Init CC core */
{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
-@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
+@@ -77,18 +84,45 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
{ BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
{ BCMA_CORE_DEFAULT, "Default" },
};
-const char *bcma_device_name(struct bcma_device_id *id)
+ break;
+ default:
+ return "UNKNOWN";
-+ }
+ }
+
+ for (i = 0; i < size; i++) {
+ if (names[i].id == id->id)
+ return names[i].name;
- }
++ }
+
return "UNKNOWN";
}
-@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
+@@ -105,19 +139,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -127,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -143,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -157,7 +191,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -167,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
+@@ -212,6 +246,17 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
-@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
+@@ -252,11 +297,15 @@ static int bcma_get_next_core(struct bcm
/* check if component is a core at all */
if (wrappers[0] + wrappers[1] == 0) {
}
if (bcma_erom_is_bridge(bus, eromptr)) {
-@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
+@@ -286,6 +335,23 @@ static int bcma_get_next_core(struct bcm
return -EILSEQ;
}
/* get & parse slave ports */
for (i = 0; i < ports[1]; i++) {
for (j = 0; ; j++) {
-@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
+@@ -298,7 +364,7 @@ static int bcma_get_next_core(struct bcm
break;
} else {
if (i == 0 && j == 0)
}
}
}
-@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
+@@ -353,6 +419,7 @@ static int bcma_get_next_core(struct bcm
void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
if (bus->init_done)
return;
-@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+@@ -363,9 +430,12 @@ void bcma_init_bus(struct bcma_bus *bus)
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
bus->init_done = true;
}
-@@ -392,6 +460,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -392,9 +462,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
+ struct bcma_device *other_core;
struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
- if (!core)
- return -ENOMEM;
-@@ -414,14 +483,15 @@ int bcma_bus_scan(struct bcma_bus *bus)
+- if (!core)
+- return -ENOMEM;
++ if (!core) {
++ err = -ENOMEM;
++ goto out;
++ }
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+@@ -409,25 +482,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ } else if (err == -ESPIPE) {
+ break;
+ }
+- return err;
++ goto out;
+ }
core->core_index = core_num++;
bus->nr_cores++;
+ list_add_tail(&core->list, &bus->cores);
}
++ err = 0;
++out:
if (bus->hosttype == BCMA_HOSTTYPE_SOC)
-@@ -471,13 +541,12 @@ int __init bcma_bus_scan_early(struct bc
+ iounmap(eromptr);
+
+- return 0;
++ return err;
+ }
+
+ int __init bcma_bus_scan_early(struct bcma_bus *bus,
+@@ -467,21 +543,21 @@ int __init bcma_bus_scan_early(struct bc
+ else if (err == -ESPIPE)
+ break;
+ else if (err < 0)
+- return err;
++ goto out;
core->core_index = core_num++;
bus->nr_cores++;
err = 0;
break;
}
+
++out:
+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+ iounmap(eromptr);
+
--- a/drivers/bcma/scan.h
+++ b/drivers/bcma/scan.h
@@ -27,7 +27,7 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -14,7 +16,57 @@
+@@ -14,18 +16,68 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
/**************************************************
* R/W ops.
-@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -72,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -102,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -124,124 +180,439 @@ static int bcma_sprom_valid(const u16 *s
* SPROM extraction.
**************************************************/
- u16 v;
+ u16 v, o;
int i;
+-
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
- SSB_SPROM_REVISION_REV;
-@@ -137,102 +216,378 @@ static void bcma_sprom_extract_r8(struct
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
-
-- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
-- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
-- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
-- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
-- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
-- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
-- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
-- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
++
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1,
+ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
-+
+
+- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+ default:
+ return true;
+ }
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+ present = true;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM43428:
++ present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
++ break;
+ default:
+ present = false;
+ break;
- u16 offset;
+ u16 offset = BCMA_CC_SPROM;
u16 *sprom;
- int err = 0;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
- return -ENOENT;
+ if (!bcma_sprom_ext_available(bus)) {
+ bool sprom_onchip;
-+
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+ /*
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
+ }
+ }
- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- GFP_KERNEL);
- if (!sprom)
- return -ENOMEM;
-
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
+- bcma_sprom_read(bus, offset, sprom);
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
- if (bus->chipinfo.id == 0x4331)
+- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ kfree(sprom);
++ }
+
+- err = bcma_sprom_valid(sprom);
+- if (err)
+- goto out;
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+- bcma_sprom_extract_r8(bus, sprom);
++ if (err) {
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
++ }
- err = bcma_sprom_valid(sprom);
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -7,6 +7,7 @@
+@@ -7,9 +7,10 @@
#include <linux/bcma/bcma_driver_chipcommon.h>
#include <linux/bcma/bcma_driver_pci.h>
#include <linux/bcma/bcma_driver_mips.h>
+#include <linux/bcma/bcma_driver_gmac_cmn.h>
#include <linux/ssb/ssb.h> /* SPROM sharing */
- #include "bcma_regs.h"
+-#include "bcma_regs.h"
++#include <linux/bcma/bcma_regs.h>
+
+ struct bcma_device;
+ struct bcma_bus;
@@ -26,6 +27,11 @@ struct bcma_chipinfo {
u8 pkg;
};
#define BCMA_CORE_INVALID 0x700
#define BCMA_CORE_CHIPCOMMON 0x800
#define BCMA_CORE_ILINE20 0x801
-@@ -125,6 +138,36 @@ struct bcma_host_ops {
+@@ -121,10 +134,104 @@ struct bcma_host_ops {
+ #define BCMA_CORE_I2S 0x834
+ #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
+ #define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
+/* Chip IDs of PCIe devices */
+#define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+#define BCMA_CHIP_ID_BCM43224 43224
+#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+
+/* Chip IDs of SoCs */
+#define BCMA_CHIP_ID_BCM4706 0x5300
++#define BCMA_PKG_ID_BCM4706L 1
+#define BCMA_CHIP_ID_BCM4716 0x4716
+#define BCMA_PKG_ID_BCM4716 8
+#define BCMA_PKG_ID_BCM4717 9
+#define BCMA_CHIP_ID_BCM4749 0x4749
+#define BCMA_CHIP_ID_BCM5356 0x5356
+#define BCMA_CHIP_ID_BCM5357 0x5357
++#define BCMA_PKG_ID_BCM5358 9
++#define BCMA_PKG_ID_BCM47186 10
++#define BCMA_PKG_ID_BCM5357 11
+#define BCMA_CHIP_ID_BCM53572 53572
++#define BCMA_PKG_ID_BCM47188 9
++
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
+
struct bcma_device {
struct bcma_bus *bus;
struct bcma_device_id id;
-@@ -136,8 +179,10 @@ struct bcma_device {
+@@ -136,8 +243,10 @@ struct bcma_device {
bool dev_registered;
u8 core_index;
u32 wrap;
void __iomem *io_addr;
-@@ -175,6 +220,12 @@ int __bcma_driver_register(struct bcma_d
+@@ -175,6 +284,12 @@ int __bcma_driver_register(struct bcma_d
extern void bcma_driver_unregister(struct bcma_driver *drv);
struct bcma_bus {
/* The MMIO area. */
void __iomem *mmio;
-@@ -191,14 +242,18 @@ struct bcma_bus {
+@@ -191,14 +306,18 @@ struct bcma_bus {
struct bcma_chipinfo chipinfo;
+ u8 num;
struct bcma_drv_cc drv_cc;
- struct bcma_drv_pci drv_pci;
+- struct bcma_drv_pci drv_pci;
++ struct bcma_drv_pci drv_pci[2];
struct bcma_drv_mips drv_mips;
+ struct bcma_drv_gmac_cmn drv_gmac_cmn;
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
-@@ -282,6 +337,7 @@ static inline void bcma_maskset16(struct
+@@ -282,6 +401,7 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -289,6 +409,7 @@ extern void bcma_core_set_clockmode(stru
+ enum bcma_clkmode clkmode);
+ extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+ bool on);
++extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset);
+ #define BCMA_DMA_TRANSLATION_MASK 0xC0000000
+ #define BCMA_DMA_TRANSLATION_NONE 0x00000000
+ #define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -56,6 +56,9 @@
+@@ -1,6 +1,9 @@
+ #ifndef LINUX_BCMA_DRIVER_CC_H_
+ #define LINUX_BCMA_DRIVER_CC_H_
+
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
+ /** ChipCommon core registers. **/
+ #define BCMA_CC_ID 0x0000
+ #define BCMA_CC_ID_ID 0x0000FFFF
+@@ -24,7 +27,7 @@
+ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+-#define BCMA_CC_FLASHT_NFLASH 0x00000200
++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
+ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+ #define BCMA_PLLTYPE_NONE 0x00000000
+@@ -45,6 +48,7 @@
+ #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+ #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+ #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
++#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */
+ #define BCMA_CC_CORECTL 0x0008
+ #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+@@ -56,6 +60,9 @@
#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
#define BCMA_CC_OTPC 0x0014 /* OTP control */
#define BCMA_CC_OTPC_RECWAIT 0xFF000000
#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
-@@ -72,6 +75,8 @@
+@@ -72,6 +79,8 @@
#define BCMA_CC_OTPP_READ 0x40000000
#define BCMA_CC_OTPP_START 0x80000000
#define BCMA_CC_OTPP_BUSY 0x80000000
#define BCMA_CC_IRQSTAT 0x0020
#define BCMA_CC_IRQMASK 0x0024
#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
-@@ -79,6 +84,15 @@
+@@ -79,6 +88,23 @@
#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
+#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
+#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
++#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001
++#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002
++#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004
++#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008
++#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010
++#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020
+#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */
+#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */
+#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
+#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
+#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
++#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -181,6 +195,22 @@
+@@ -108,10 +134,58 @@
+ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+ #define BCMA_CC_FLASHCTL 0x0040
++/* Start/busy bit in flashcontrol */
++#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
++#define BCMA_CC_FLASHCTL_ACTION 0x00000700
++#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
+ #define BCMA_CC_FLASHCTL_START 0x80000000
+ #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
++/* Flashcontrol action + opcodes for ST flashes */
++#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
++#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
++#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
++#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
++#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
++#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
++#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
++#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
++#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
++#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
++#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
++#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
++/* Flashcontrol action + opcodes for Atmel flashes */
++#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
++#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
++#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
++#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
++#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
++#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
++#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
++#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
++#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
++#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
++#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
++#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
++#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
++#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
++#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
++#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
++#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
+ #define BCMA_CC_FLASHADDR 0x0044
+ #define BCMA_CC_FLASHDATA 0x0048
++/* Status register bits for ST flashes */
++#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
++#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
++#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
++#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
++#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
++/* Status register bits for Atmel flashes */
++#define BCMA_CC_FLASHDATA_AT_READY 0x80
++#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
++#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
++#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
+ #define BCMA_CC_BCAST_ADDR 0x0050
+ #define BCMA_CC_BCAST_DATA 0x0054
+ #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+@@ -181,6 +255,45 @@
#define BCMA_CC_FLASH_CFG 0x0128
#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
#define BCMA_CC_FLASH_WAITCNT 0x012C
+#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004
+#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1
+#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001
++/* Block 0x140 - 0x190 registers are chipset specific */
++#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */
++#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff
++#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */
++#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */
++#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */
++#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */
++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */
++/* NAND flash registers for BCM4706 (corerev = 31) */
++#define BCMA_CC_NFLASH_CTL 0x01A0
++#define BCMA_CC_NFLASH_CTL_ERR 0x08000000
++#define BCMA_CC_NFLASH_CONF 0x01A4
++#define BCMA_CC_NFLASH_COL_ADDR 0x01A8
++#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC
++#define BCMA_CC_NFLASH_DATA 0x01B0
++#define BCMA_CC_NFLASH_WAITCNT0 0x01B4
/* 0x1E0 is defined as shared BCMA_CLKCTLST */
#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define BCMA_CC_UART0_DATA 0x0300
-@@ -240,7 +270,6 @@
+@@ -203,6 +316,9 @@
+ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
+ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */
++#define BCMA_CC_PMU_CTL_RES_SHIFT 13
++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */
+ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
+ #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+@@ -214,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -239,8 +357,66 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
++/* NAND flash MLC controller registers (corerev >= 38) */
++#define BCMA_CC_NAND_REVISION 0x0C00
++#define BCMA_CC_NAND_CMD_START 0x0C04
++#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08
++#define BCMA_CC_NAND_CMD_ADDR 0x0C0C
++#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10
++#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14
++#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18
++#define BCMA_CC_NAND_SPARE_RD0 0x0C20
++#define BCMA_CC_NAND_SPARE_RD4 0x0C24
++#define BCMA_CC_NAND_SPARE_RD8 0x0C28
++#define BCMA_CC_NAND_SPARE_RD12 0x0C2C
++#define BCMA_CC_NAND_SPARE_WR0 0x0C30
++#define BCMA_CC_NAND_SPARE_WR4 0x0C34
++#define BCMA_CC_NAND_SPARE_WR8 0x0C38
++#define BCMA_CC_NAND_SPARE_WR12 0x0C3C
++#define BCMA_CC_NAND_ACC_CONTROL 0x0C40
++#define BCMA_CC_NAND_CONFIG 0x0C48
++#define BCMA_CC_NAND_TIMING_1 0x0C50
++#define BCMA_CC_NAND_TIMING_2 0x0C54
++#define BCMA_CC_NAND_SEMAPHORE 0x0C58
++#define BCMA_CC_NAND_DEVID 0x0C60
++#define BCMA_CC_NAND_DEVID_X 0x0C64
++#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68
++#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C
++#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70
++#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74
++#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78
++#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C
++#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80
++#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84
++#define BCMA_CC_NAND_READ_ADDR_X 0x0C90
++#define BCMA_CC_NAND_READ_ADDR 0x0C94
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C
++#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0
++#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC
++#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0
++#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4
++#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0
++#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0
++#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4
++#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8
++#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC
++#define BCMA_CC_NAND_SPARE_RD16 0x0D30
++#define BCMA_CC_NAND_SPARE_RD20 0x0D34
++#define BCMA_CC_NAND_SPARE_RD24 0x0D38
++#define BCMA_CC_NAND_SPARE_RD28 0x0D3C
++#define BCMA_CC_NAND_CACHE_ADDR 0x0D40
++#define BCMA_CC_NAND_CACHE_DATA 0x0D44
++#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48
++#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
-@@ -256,6 +285,15 @@
+@@ -256,6 +432,32 @@
/* 4706 PMU */
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
+#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
++
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
-@@ -284,6 +322,19 @@
+@@ -284,6 +486,19 @@
#define BCMA_CC_PPL_PCHI_OFF 5
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
/* BCM4331 ChipControl numbers. */
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +348,18 @@
+@@ -297,9 +512,56 @@
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
+/* 4313 Chip specific ChipControl register bits */
+#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
+
++/* BCM5357 ChipControl register bits */
++#define BCMA_CHIPCTL_5357_EXTPA BIT(14)
++#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15)
++#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
++#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
++#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
++
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -387,5 +447,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -310,11 +572,36 @@ struct bcma_chipcommon_pmu {
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ struct bcma_pflash {
++ bool present;
+ u8 buswidth;
+ u32 window;
+ u32 window_size;
+ };
+
++#ifdef CONFIG_BCMA_SFLASH
++struct bcma_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ struct mtd_info *mtd;
++ void *priv;
++};
++#endif
++
++#ifdef CONFIG_BCMA_NFLASH
++struct mtd_info;
++
++struct bcma_nflash {
++ bool present;
++ bool boot; /* This is the flash the SoC boots from */
++
++ struct mtd_info *mtd;
++};
++#endif
++
+ struct bcma_serial_port {
+ void *regs;
+ unsigned long clockspeed;
+@@ -330,15 +617,30 @@ struct bcma_drv_cc {
+ u32 capabilities;
+ u32 capabilities_ext;
+ u8 setup_done:1;
++ u8 early_setup_done:1;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ struct bcma_pflash pflash;
++#ifdef CONFIG_BCMA_SFLASH
++ struct bcma_sflash sflash;
++#endif
++#ifdef CONFIG_BCMA_NFLASH
++ struct bcma_nflash nflash;
++#endif
+
+ int nr_serial_ports;
+ struct bcma_serial_port serial_ports[4];
+ #endif /* CONFIG_BCMA_DRIVER_MIPS */
++ u32 ticks_per_ms;
++ struct platform_device *watchdog;
++
++ /* Lock for GPIO register access. */
++ spinlock_t gpio_lock;
++#ifdef CONFIG_BCMA_DRIVER_GPIO
++ struct gpio_chip gpio;
++#endif
+ };
+
+ /* Register access */
+@@ -355,14 +657,16 @@ struct bcma_drv_cc {
+ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
++extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
+
+ extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+ extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
+-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+- u32 ticks);
++extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
+
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+@@ -375,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+ /* PMU support */
+ extern void bcma_pmu_init(struct bcma_drv_cc *cc);
++extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
+
+ extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ u32 value);
+@@ -387,5 +694,8 @@ extern void bcma_chipco_chipctl_maskset(
u32 offset, u32 mask, u32 set);
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
++
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- /dev/null
+#endif
+
+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -28,6 +28,7 @@
+ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+ #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
++#define BCMA_MIPS_OOBSELINA74 0x004
+ #define BCMA_MIPS_OOBSELOUTA30 0x100
+
+ struct bcma_device;
+@@ -35,17 +36,24 @@ struct bcma_device;
+ struct bcma_drv_mips {
+ struct bcma_device *core;
+ u8 setup_done:1;
+- unsigned int assigned_irqs;
++ u8 early_setup_done:1;
+ };
+
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_irq(struct bcma_device *core);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
++static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
++
++static inline unsigned int bcma_core_irq(struct bcma_device *core)
++{
++ return 0;
++}
+ #endif
+
+ extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+-
+ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -53,11 +53,47 @@ struct pci_dev;
/* SBtoPCIx */
#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
-@@ -72,20 +108,118 @@ struct pci_dev;
+@@ -72,20 +108,120 @@ struct pci_dev;
#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
+
++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
++
+/* PCIE Root Capability Register bits (Host mode only) */
+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
+
#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
-@@ -56,4 +56,31 @@
+@@ -11,11 +11,13 @@
+ #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+ #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+ #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
++#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8
+ #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
+ #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */
+ #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */
+ #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */
+ #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */
++#define BCMA_CLKCTLST_EXTRESST_SHIFT 24
+ /* Is there any BCM4328 on BCMA bus? */
+ #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
+ #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
+@@ -35,6 +37,7 @@
+ #define BCMA_IOST_BIST_DONE 0x8000
+ #define BCMA_RESET_CTL 0x0800
+ #define BCMA_RESET_CTL_RESET 0x0001
++#define BCMA_RESET_ST 0x0804
+
+ /* BCMA PCI config space registers. */
+ #define BCMA_PCI_PMCSR 0x44
+@@ -56,4 +59,36 @@
#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+ * (2 ZettaBytes), high 32 bits
+ */
+
++#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
++#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
++#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
++#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
++
#endif /* LINUX_BCMA_REGS_H_ */
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -4618,7 +4618,7 @@ static int b43_wireless_core_init(struct
+ switch (dev->dev->bus_type) {
+ #ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
++ bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
+ dev->dev->bdev, true);
+ break;
+ #endif
+--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+@@ -533,7 +533,7 @@ ai_buscore_setup(struct si_info *sii, st
+
+ /* fixup necessary chip/core configurations */
+ if (!sii->pch) {
+- sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core);
++ sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci[0].core);
+ if (sii->pch == NULL)
+ return false;
+ }